JESS Fortress Posted March 31, 2009 Share Posted March 31, 2009 hey man i got the fully working QE/CI with FX5200 on xXx 10.5.6 v.2(i guess this method works on every 10.5.6 release) here is what i did..... 1. i installed 10.5.6 release with all the required components but i wont selected the video driver... 2. than i installed the coregraphics.framework from iDeneb v1.3 10.5.5 with the help of Pacifist 3. than i installed the nvkushcomplete package 4. Restart 5. VOILA i got fully working FX5200 now my 2nd aim is to get the FX5500 fully working if i got success in that than the next aim is dual display and the third aim is Retail 10.5.6 working........ i know someday i'll be there...... guuud luck to all........ Congratulation then.. please download here for the right coregraphics.framwork path.. so sorry all.. Link to comment Share on other sites More sharing options...
oskr66 Posted April 1, 2009 Share Posted April 1, 2009 Hey Jess Fortress , what is the difference with this new coregraphics.framwork path. and the old one you gave us before? I noticed that the old file is 17.1 Mb , and this new one is 16.32 Mb. , in any ways , thanks for the files , I got my card now with the resolution I want , and the QE/ CI working . Link to comment Share on other sites More sharing options...
JESS Fortress Posted April 6, 2009 Share Posted April 6, 2009 Hey Jess Fortress , what is the difference with this new coregraphics.framwork path. and the old one you gave us before? I noticed that the old file is 17.1 Mb , and this new one is 16.32 Mb. , in any ways , thanks for the files , I got my card now with the resolution I want , and the QE/ CI working . Just using smallest size option when packaging the coregraphics.framework I guess.. the difference is the path from root to the coregraphics.framework, the previous one is incorrect, please read the thread written by twonine : posted Mar 26 2009, 07:03 A .. congratulation anyway.. Link to comment Share on other sites More sharing options...
Logicalnot Posted April 7, 2009 Share Posted April 7, 2009 Hi Jess Thanks for all your help and eveyone else that contributed to this thread. I tried so many different versions and combinations of Hackintosh installs, I was beginning to think I might be sadomasicistic. Your posts were the final clue I needed. Had lots of success with Kalyway and got my install up to 10.5.5. I could install iPCx86 10.5.6 but could not get graphics to work 100%. In the end: my setup. Asus P4P E 800 Deluxe Motherboard Pentium 4 3.0 Ghz single core Asus 9250 video card(nvidia geforce fx 5700, I think) 1.76 gb ddr ram 1 sata 75gb HD, 2 ide 250gb HD's, 1 ide 75gb HD on board AC97 audio onboard Marvell ethernet. Installed iPC OSX86 base install 9.4.0 modbin Patched Kernel Drivers: Intel ICHx Sata driver, AC97 Audio, Skge Marvell Yukon driver. *note i left out video drivers. Patch: CPU=1 After successful install did not reboot, I reinstalled 10.5.5 coregraphics frameworks you posted earlier and than NVkush complete package also found in this discussion. Reboot and everything works great except for a couple of minor things: 1) Computer wants to sleep on reboot(most not all of the time. Vigorous mouse and keyboard clicking at just the right time during bootup hold the sleep but itis hit and miss). I'm using DVI set at 1680x1050@ 60htz. Anyone know and easy fix for this? 2) Screen artifacts in the toolbar when viewing control panels or Preview, only. Hmmm? Ciao Happy8995 Link to comment Share on other sites More sharing options...
him Posted April 29, 2009 Share Posted April 29, 2009 I have the same problem as the poster above. I installed ideneb 10.5.6 with nvdarwin for my fx5200, then followed the instructions in this thread, installing 10.5.5 core graphics and NVKush. Now I also have the graphics glitch only in system preferences and preview. If I use osx86Tools to enable quartz/gl, then the graphics glitch appears everywhere on the system. Is there a solution to fix this? thanks GeForce 5200 FX: Chipset Model: GeForce 5200 FX Type: Display Bus: PCI VRAM (Total): 128 MB Vendor: NVIDIA (0x10de) Device ID: 0x0322 Revision ID: 0x00a1 ROM Revision: NVdarwin 1.2.5 Displays: DELL E196FP: Resolution: 1280 x 1024 @ 75 Hz Depth: 32-bit Color Core Image: Hardware Accelerated Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Supported Link to comment Share on other sites More sharing options...
JESS Fortress Posted May 4, 2009 Share Posted May 4, 2009 I have the same problem as the poster above.I installed ideneb 10.5.6 with nvdarwin for my fx5200, then followed the instructions in this thread, installing 10.5.5 core graphics and NVKush. Now I also have the graphics glitch only in system preferences and preview. If I use osx86Tools to enable quartz/gl, then the graphics glitch appears everywhere on the system. Is there a solution to fix this? thanks GeForce 5200 FX: Chipset Model: GeForce 5200 FX Type: Display Bus: PCI VRAM (Total): 128 MB Vendor: NVIDIA (0x10de) Device ID: 0x0322 Revision ID: 0x00a1 ROM Revision: NVdarwin 1.2.5 Displays: DELL E196FP: Resolution: 1280 x 1024 @ 75 Hz Depth: 32-bit Color Core Image: Hardware Accelerated Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Supported Yep.. there is.. install the coregraphics.framework Link to comment Share on other sites More sharing options...
koldun2 Posted July 12, 2009 Share Posted July 12, 2009 It doesn't work on iAtkos v7 Leo 10.5.7 with FX5500. I also have the graphics glitch only in system preferences and preview. Is there a solution to fix this? Link to comment Share on other sites More sharing options...
Amit Meena Posted July 13, 2009 Share Posted July 13, 2009 It doesn't work on iAtkos v7 Leo 10.5.7 with FX5500. I also have the graphics glitch only in system preferences and preview. Is there a solution to fix this? u mean with iAtkos v7 FX5500 is working but with few glitches..........??? how u installed the QE/CI.......??? are they both working......??? Link to comment Share on other sites More sharing options...
koldun2 Posted July 13, 2009 Share Posted July 13, 2009 u mean with iAtkos v7 FX5500 is working but with few glitches..........??? yes I finded drivers for nVidia GeForce FX5500 on Leopard 10.5.7 1. Delete all Geforce*.*, NVDA*.*, AppleGraphics*.*, AppleUpstream*.* files 2. Install nVIDIA Kexts from DiaboliK http://diabolik1605.com/DHF/Installer/NVid...s-Kexts.pkg.tbz 3. Install NVKush Installer http://diabolik1605.com/DHF/NVkush/NVkushInstaller.pkg.tgz 4. Reboot It works... but with few glitches. http://savepic.ru/686619.htm Thanks for russian guys - slice and TimeWalker from applelife. OR... you can install coregraphics.framework from iAtkos v5 Leo 10.5.5 and nvkushcomplete package. Link to comment Share on other sites More sharing options...
Amit Meena Posted July 13, 2009 Share Posted July 13, 2009 yesI finded drivers for nVidia GeForce FX5500 on Leopard 10.5.7 1. Delete all Geforce*.*, NVDA*.*, AppleGraphics*.*, AppleUpstream*.* files 2. Install nVIDIA Kexts from DiaboliK http://diabolik1605.com/DHF/Installer/NVid...s-Kexts.pkg.tbz 3. Install NVKush Installer http://diabolik1605.com/DHF/NVkush/NVkushInstaller.pkg.tgz 4. Reboot It works... but with few glitches. http://savepic.ru/686619.htm Thanks for russian guys - slice and TimeWalker from applelife. OR... you can install coregraphics.framework from iAtkos v5 Leo 10.5.5 and nvkushcomplete package. in system profiler is it showing QE/CI working............??? Link to comment Share on other sites More sharing options...
koldun2 Posted July 13, 2009 Share Posted July 13, 2009 yes, of course! Quartz Extreme: Supported Core Image: Hardware Accelerated Link to comment Share on other sites More sharing options...
Amit Meena Posted July 13, 2009 Share Posted July 13, 2009 yes, of course!Quartz Extreme: Supported Core Image: Hardware Accelerated koool man.... i'm going to download this right now......and tell you the results tomorrow same time....... Link to comment Share on other sites More sharing options...
koldun2 Posted July 17, 2009 Share Posted July 17, 2009 Hey, Amit Meena? Where are you? Link to comment Share on other sites More sharing options...
Amit Meena Posted July 17, 2009 Share Posted July 17, 2009 check your INBOX Link to comment Share on other sites More sharing options...
woodchuk Posted July 19, 2009 Share Posted July 19, 2009 Corruption fix (solved) here. [edited to correct directory path] thanks to sanya in this thread: http://www.insanelymac.com/forum/index.php...p;#entry1009751 10.5.7 and Fx5200. Now working with QE/CI/QGL and NO corruption. Used all the previous methods here too. The Coregraphics pkg would go through the motions, but did NOT install the older files. Found that instead of installing the 10.5.5 Coregraphics, I had to manually copy the Versions folder from the Core pkg. Used pacifist to unarchive the pkg, renamed the Versions folder in /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreGraphics.framework/Versions to /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreGraphics.framework/Versions.old then copied the pacifist unarc'd /Versions folder to that directory. Rebooted, no more corruption. Hope this helps. It doesn't work on iAtkos v7 Leo 10.5.7 with FX5500. I also have the graphics glitch only in system preferences and preview. Is there a solution to fix this? Link to comment Share on other sites More sharing options...
Amit Meena Posted July 19, 2009 Share Posted July 19, 2009 Corruption fix (solved) here. 10.5.7 and Fx5200. Now working with QE/CI/QGL and NO corruption. Used all the previous methods here too. The Coregraphics pkg would go through the motions, but did NOT install the older files. Found that instead of installing the 10.5.5 Coregraphics, I had to manually copy the Versions folder from the Core pkg. Used pacifist to unarchive the pkg, renamed the Versions folder in /System/Library/Frameworks/ApplicationServices.framework/Versions to Versions.old then copied the pacifist unarc'd Versions folder to that directory. Rebooted, no more corruption. Hope this helps. hey how you did that plz explain all the details like what distro r u using and also the hardware u r using........ and plz explain the versions folder which you have copied to the OS directory........ thanx...... Link to comment Share on other sites More sharing options...
woodchuk Posted July 19, 2009 Share Posted July 19, 2009 Amit, thanks for catching the directory error. Fixed original post. more details below. thanks to sanya in this thread: http://www.insanelymac.com/forum/index.php...p;#entry1009751 P4 Celery on 865G MB, iAtkos v7, Fx5200. If you have installed CoreGraphics 10.5.5 to fix the corruption issue, it may not have installed correctly. check the dates on the files in folder: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions if they aren't July 2008 versions, and instead are March 2009, then you'll need to manually copy the /Versions folder of the CoreGraphics 10.5.5 pkg into the above directory. Use pacifist to un-archive the CoreGraphics 10.5.5 pkg and save it. then rename /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions to /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions.old then copy the CoreGraphics 10.5.5 /Versions folder into /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/ Rebooted. No more corruption. Let me know if this works for you. hey how you did that plz explain all the details like what distro r u using and also the hardware u r using........ and plz explain the versions folder which you have copied to the OS directory........ thanx...... Link to comment Share on other sites More sharing options...
Amit Meena Posted July 19, 2009 Share Posted July 19, 2009 hey woodchuk thanx for the guide can you please upload all the files you have used to getting your Video card working........ please upload them to MediaFire Link to comment Share on other sites More sharing options...
woodchuk Posted July 19, 2009 Share Posted July 19, 2009 All the files you need are in this thread. posts 8 and 19 hey woodchuk thanx for the guide can you please upload all the files you have used to getting your Video card working........ please upload them to MediaFire Link to comment Share on other sites More sharing options...
woodchuk Posted July 23, 2009 Share Posted July 23, 2009 Hrmmm. I can simply click and rename. I did try to install the core 10.5.5 package first by double clicking and following the installer prompts, which didn't work as described previously. iAtkos v7, admin here too. I used carboncopy to move everything to a less noisy drive before the renames. Perhaps that might affect change permissions? Sorry Kolden, I don't what else could keep you from renaming that folder. Link to comment Share on other sites More sharing options...
koldun2 Posted July 30, 2009 Share Posted July 30, 2009 1. I used command sudo /usr/sbin/diskutil disableJournal / 2. With Parted Magic Live CD I have copied CoreGraphics 10.5.5 No more corruption. Link to comment Share on other sites More sharing options...
Amit Meena Posted August 8, 2009 Share Posted August 8, 2009 i installed iAtkos v.7 w/o any video driver but it was in a reboot loop........... Link to comment Share on other sites More sharing options...
koldun2 Posted August 9, 2009 Share Posted August 9, 2009 I installed iAtkos v7 Leo 10.5.7 with options: Bootloader: Chameleon 2.0 x86 Patches: Extra dir, DSDT, Decrypters (Apple decrypter), SMBIOS drivers (SMBIOS EFI), Kernel 9.5.0, Disabler, OHR Drivers: do not check video drivers (use this forum to install drivers for fx5500), System Intel SATA/IDE, Sound (i installed other drivers), Apple PS/2 driver, Network Realtek RTL 8139 Your Language PostInstalActions See current Signature with my hardware Try to disable integrated LAN in BIOS and use other adapter. I disabled Intel LAN on my motherboard and installed Realtek 8139D - non-problem network adapter. Link to comment Share on other sites More sharing options...
Amit Meena Posted August 9, 2009 Share Posted August 9, 2009 I installed iAtkos v7 Leo 10.5.7 with options:Bootloader: Chameleon 2.0 x86 Patches: Extra dir, DSDT, Decrypters (Apple decrypter), SMBIOS drivers (SMBIOS EFI), Kernel 9.5.0, Disabler, OHR Drivers: do not check video drivers (use this forum to install drivers for fx5500), System Intel SATA/IDE, Sound (i installed other drivers), Apple PS/2 driver, Network Realtek RTL 8139 Your Language PostInstalActions See current Signature with my hardware thanx for the PM and replying here....... i have installed OS w/o video driver but finished with a reboot loop..........there is no sleep kernel(which worked fine here with 10.5.6) so i checked 9.5.0 kernel.......... can you suggest what was the problem....... Link to comment Share on other sites More sharing options...
koldun2 Posted August 9, 2009 Share Posted August 9, 2009 i have installed OS w/o video driver but finished with a reboot loop Try to disable integrated LAN in BIOS and use other adapter. I disabled Intel LAN on my motherboard and installed Realtek 8139D - non-problem network adapter. This problem has been solved this way. Link to comment Share on other sites More sharing options...
Recommended Posts