Jump to content

Instala normalmente mas reinicia sem parar


iMundo
 Share

10 posts in this topic

Recommended Posts

Valeu pela atenção galera.

Tentei de tudo que axei na net e acabei perdendo tudo q tinha no hd .

mas a vida continua. Estou baixando o ideneb, talves tenha mais sorte com ele.

Segue meu log, sera que roda com essa configuração ?

 

Processor(s)

Number of processors 1

Number of cores 2 per processor

Number of threads 2 per processor

Name Intel Pentium E2220

Code Name Conroe

Specification Intel® Pentium® Dual CPU E2200 @ 2.20GHz

Package Socket 775 LGA

Family/Model/Stepping 6.F.D

Extended Family/Model 6.F

Core Stepping M0

Technology 65 nm

Core Speed 1197.1 MHz

Multiplier x Bus speed 6.0 x 199.5 MHz

Rated Bus speed 798.1 MHz

Stock frequency 2200 MHz

Instruction sets MMX, SSE, SSE2, SSE3, SSSE3, EM64T

L1 Data cache (per processor) 2 x 32 KBytes, 8-way set associative, 64-byte line size

L1 Instruction cache (per processor) 2 x 32 KBytes, 8-way set associative, 64-byte line size

L2 cache (per processor) 1024 KBytes, 4-way set associative, 64-byte line size

Chipset & Memory

Northbridge Intel i945G/GZ rev. A2

Southbridge Intel 82801GB (ICH7/R) rev. A1

Memory Type DDR2

Memory Size 1024 MBytes

Memory Frequency 332.5 MHz (3:5)

CAS# Latency (tCL) 5.0 clocks

RAS# to CAS# (tRCD) 5 clocks

RAS# Precharge (tRP) 5 clocks

Cycle Time (tRAS) 15 clocks

Bank Cycle Time (tRC) 21 clocks

System

System Manufacturer POSITIVO

System Name POS-MI945AA

System S/N 4326041

Mainboard Vendor Positivo Informatica SA

Mainboard Model POS-MI945AA

BIOS Vendor Desenvolvida para Positivo Informatica SA

BIOS Version V16.4B17

BIOS Date 08/14/2008

Memory SPD

Module 1 DDR2, PC2-5300 (333 MHz), 1024 MBytes, unknown brand

Link to comment
Share on other sites

System Manufacturer POSITIVO

System Name POS-MI945AA

System S/N 4326041

Mainboard Vendor Positivo Informatica SA

Mainboard Model POS-MI945AA

BIOS Vendor Desenvolvida para Positivo Informatica SA

BIOS Version V16.4B17

BIOS Date 08/14/2008

 

Chipset & Memory

Northbridge Intel i945G/GZ rev. A2

Southbridge Intel 82801GB (ICH7/R) rev. A1

Memory Type DDR2

Memory Size 1024 MBytes

Memory Frequency 332.5 MHz (3:5)

CAS# Latency (tCL) 5.0 clocks

RAS# to CAS# (tRCD) 5 clocks

RAS# Precharge (tRP) 5 clocks

Cycle Time (tRAS) 15 clocks

Bank Cycle Time (tRC) 21 clocks

 

Sim, são discos sata

Link to comment
Share on other sites

Instalei o iDeneb v1.3 10.5.5

os patches cpus=1 e acpi que vêm com ele resolveram o problema

Mas agora trava no carregamento nessa mensagem:

 

Extension "com.apple.driver.iTunesPhoneDriver" has no explicit kernel dependency; using version 6.0.

 

Alguem sabe o que é ?

Link to comment
Share on other sites

  • 6 months later...

Galera já baixei 3 versões do mac, o Kalyway 10.5.2 e o iATKOS_5i começa carregar o DVD e reinicia. já apertei F8 e tentei -v -x -f -s e nada, o único que instalou sem problemas foi o iDeneb_v1.4_10.5.6, mais quando reinicia fica na tela da maçã e o teclado para de responder, tentei apertando F8 -v ele carrega umas 20 linhas e para já esperei por quase uma hora e nada

 

Meu PC é este:

 

Placa mãe: (POS-MI945AA Positivo)

Chipset: (i945 Intel)

Processador (intel Core 2 Duo E7400 2.80Ghz Socket 775 LGA)

Memória (4GB RAM DDR2 667Mhz) /

Placa de vídeo (GeForce 8600GT 512 MB DDR2 XFX)

Placa de rede (Realtek RTL8168B/8111B Family PCI-E Gigabit Ethernet)

Audio (High Definition Audio Device) /

HDs (SAMSUNG SP2504C ATA) /

DVD-RW (HL-DT-ST GH22NS30 ATA) /

Teclado e Mouse (Padrão PS2).

Link to comment
Share on other sites

Galera, ontem a noite instalei o Kalyway 10.5.2 no meu PC e a instalação transcorreu tranquilamente até o fim, o sistema pediu para reiniciar e quando reiniciou apareceu a tela do Darwin com o boot para win ou mac, selecionei o MAC e o sistema não carregou, fica só reiniciando.

 

Meu hardware é:

Mobo ECS a780GM-A

Athlon 64 x2 5200+

4Gb DDR 2 800mhz G.Skill

HD SATA II 320GB Western Digital

ECS nVidia 9600GT 512mb

 

Aguardo ajuda.

Link to comment
Share on other sites

Galera, ontem a noite instalei o Kalyway 10.5.2 no meu PC e a instalação transcorreu tranquilamente até o fim, o sistema pediu para reiniciar e quando reiniciou apareceu a tela do Darwin com o boot para win ou mac, selecionei o MAC e o sistema não carregou, fica só reiniciando.

 

Meu hardware é:

Mobo ECS a780GM-A

Athlon 64 x2 5200+

4Gb DDR 2 800mhz G.Skill

HD SATA II 320GB Western Digital

ECS nVidia 9600GT 512mb

 

Aguardo ajuda.

 

 

 

 

tenta usar outro kernel... aqui acontecia isso, só reiniciava... mudei a versão do kernel e funcionou

Link to comment
Share on other sites

 Share

×
×
  • Create New...