unterbelichtet Posted November 11, 2008 Share Posted November 11, 2008 Hallo Leuts! Bin hier neu in der Community und auch in der Hackintosh Szene und versuche zum allersten mal einen Hackintosh PC zu basteln. Habe mich auch vorher informiert und damit ich im legalen Rahmen bleibe, habe ich mir das Betriebssystem Mac OSX Leoard gekauft. Da ich aber nicht einfach die Installations DVD von Mac direkt verwenden kann, habe ich mich für iDeneb entschieden. Folgendes Problem ist dabei aufgetretten... Ich versuche schon seit mindestens 2 Stunden herauszufinden wie ich den die iDeneb.ISO mit dem Nforcepatch patchen kann. Blicke da auch nicht bei der Readme durch. Enter the following command in the terminal to run the patch (read carefully the legend before run the command) ApplyPPF3 a original_iso ppf Legend: ApplyPPF3 = path of file ApplyPPF3 a = command for apply the patch original_iso = path of the iso iDeneb v1.3 10.5.5 not patched ppf = path of the ppf patch Ich raffe zwar, das ich mir die Pfade der Dateien rausuchen muss, aber was ist das commando ([/size]a = command for apply the patch) und wo muss ich das alles eingeben? [/size] Ich habe hier schon im Forum gesucht (auch osx86project) und bei iDeneb im Forum und bei Hackintosh search, finde aber nichts. Vll bin ich ja blind... Sollte ich was übersehen haben könnt ihr mich auf einen link hinweisen. Würde mich freuen wenn jemand helfen könnte Übrigens mein geplanter Hackintosh hat folgendes System: ASUS P5N32-SLI Premium Motherboard NForce 590 SLI Chipsatz Intel Core 2 Duo 6300 @ 2,4 ghz 2 GB OCZ Platinum Arbeitsspeicher (800er) 1x IDE HDD 120 GB (Master) nur für Windoof 1x IDE LG GSA-H42L Laufwerk (Slave) 1x SATA Western Digital 250 GB 1x SATA Seagate 500 GB LAN on board Creativ X-Fi Elite Soundkarte Vll hilft das ja weiter... Vielen Dank schonmal im Voraus!!!! Link to comment Share on other sites More sharing options...
Recommended Posts