quattrofx Posted November 8, 2008 Share Posted November 8, 2008 Hi Folks! As i already mentioned in my first Post: http://forum.insanelymac.com/index.php?sho...rt=#entry941767 I had some problems loading newest driver V.2.1.3 for my Contour Shuttle Pro. I tried different Versions (V.2.1.2, V.2.0.2) but without success. I´ve checked VendorID (0B33) and ProductID (0011) under Vista and System Profiler match the same ID´s! Editing ContourShuttle.kext I found out that in Info.plist for my Model Pro shows wrong ProductID (Dez. 16) Actually should be Dezimal 17, because HEX 0011 = Dezimal 17 so I decided to make a change of it on Ver.2.1.3. In Terminal did next steps: sudo -s (Enter) Type your root Password (Enter) cd /System/Library/Extensions/ContourShuttle.kext/Contents (Enter) chmod 644 Info.plist (Enter) nano Info.plist (When Info.plist opens, change under Shuttle Pro 2 ... ProductID the Value 17 instead of 16) CTRL+O Enter CTRL+X chown -R root:wheel /System/Library/Extensions (Enter) rm /System/Library/Extensions.mkext (Enter) kextcache -k /System/Library/Extensions (Enter) exit Close all App. It is not necessary, but you can Repair Permissions to be shore and Reboot! After reboot everything work properly - all 13 Keys, Editing wheel and Shuffle Jog!!! For Every single Application: Final Cut Pro HD, After Effects, etc. ShuttlePro loads automatically specific Settings. Perfect for me! Only problem is that you cannot choose and edit Shuttle Settings manually in case you wont to make Spec. Settings for not supported App. The next step will be to solve this! Any advice or good tip is welcome! Best Regards to all OSX86 Family! Link to comment Share on other sites More sharing options...
DAillou Posted November 26, 2008 Share Posted November 26, 2008 HI. I'm desperately trying to have my Shuttle Pro working on my new MBP 2.4Ghz under MAcOsX... I tried your solution and it does not seem to be working. Do you have an idea why it does not? I'm a brand new switcher and, moreover, I'm french... Thanks for helping. Link to comment Share on other sites More sharing options...
DAillou Posted November 29, 2008 Share Posted November 29, 2008 Nobody can help me? Link to comment Share on other sites More sharing options...
quattrofx Posted December 4, 2008 Author Share Posted December 4, 2008 Hi DAillou! Sorry for waiting. 1. Can you check Vendor ID and Product ID of your Shuttle Pro in System Profiler under USB Devices? 2. What Manufacturer is listed: "Contour Design" or "Hercules"? Link to comment Share on other sites More sharing options...
DAillou Posted December 8, 2008 Share Posted December 8, 2008 HEllo. Thank you for answering. My shuttle pro is "HErcules", "powered by contour AVS"... I can't tell tou for the product ID yet, I do not have the Shuttle with me at the moment. Link to comment Share on other sites More sharing options...
DAillou Posted December 17, 2008 Share Posted December 17, 2008 Sorry to insist, but.... Do you have a solution? Link to comment Share on other sites More sharing options...
quattrofx Posted January 26, 2009 Author Share Posted January 26, 2009 Sorry, but as long as you don´t have product ID and Vendor ID, I cannot help you. Link to comment Share on other sites More sharing options...
bluesnoob Posted January 31, 2009 Share Posted January 31, 2009 Well the mod works perfectly - but why the heck does the configuration dialog say 'no device found' ? That's what cheated me in the first place, i already tried this two weeks ago but believed the message in the dialog only, not recognizing that the device actually does it's thing when the configured application is active. I also own the device from the Hercules DVaction! bundle (Device ID 0x0011) Link to comment Share on other sites More sharing options...
quattrofx Posted February 3, 2009 Author Share Posted February 3, 2009 I am working on it! As soon as I got the Solution I will post it here! BR Link to comment Share on other sites More sharing options...
digitaldream Posted March 9, 2009 Share Posted March 9, 2009 hi I have the right values on the plist but it does not work. ShuttlePRO: Product ID: 0x0011 Vendor ID: 0x0b33 Version: 1.00 Speed: Up to 1.5 Mb/sec Manufacturer: Contour Design Location ID: 0x1a200000 Current Available (mA): 500 Current Required (mA): 32 Link to comment Share on other sites More sharing options...
vladmisterpixel Posted March 25, 2009 Share Posted March 25, 2009 Great job quattrofx!!! thanx a lot, it fixed my "dead" hercules shuttlepro on macpro. thank you Link to comment Share on other sites More sharing options...
medioevo Posted April 19, 2009 Share Posted April 19, 2009 I have Hercules shuttle pro Any of my mac recognize it... How did you do???? med Link to comment Share on other sites More sharing options...
quattrofx Posted April 21, 2009 Author Share Posted April 21, 2009 Hi to all! Contour Company brought on Market a newest Driver 2.1.4 for Shuttle, Shuttle Pro I & II with Support for all newest Applications: Adobe CS3 & CS4, FinalCutSuite 2, IMovie09, etc... Just download it and INSTALL. Download my ContourShuttle.Kext from kexts.com Zip and replace original under: System/Library/Extensions/ContourShuttle.kext. Repair Permissions and Reboot. Thats all! I hope that will work for you! Best Regards QuattroFX Link to comment Share on other sites More sharing options...
medioevo Posted April 23, 2009 Share Posted April 23, 2009 I did it: install 2.1.4 use your kext rebuild reboot As always I have 'no device found'... sigh sigh What should I have to do???!!! Thank you very much 4FX enrico Link to comment Share on other sites More sharing options...
medioevo Posted April 26, 2009 Share Posted April 26, 2009 My error!! The trick works. The only problem is the write 'no device found' but the shuttle does his job. thanx very much 4fx!! med Link to comment Share on other sites More sharing options...
quattrofx Posted April 27, 2009 Author Share Posted April 27, 2009 My error!!The trick works. The only problem is the write 'no device found' but the shuttle does his job. thanx very much 4fx!! med I´am glad to hear that, Enrico! Wish you much Fun with it! PS QuattroFX Link to comment Share on other sites More sharing options...
DAillou Posted May 10, 2009 Share Posted May 10, 2009 Hi. I tried your new solution but it still does not work on my macbook pro. After the reboot, it says "the system extension can not be used" "the system extension System/Library/Extensions/ContourShuttle.kext has not been preoperly installed and can not be used. Please try to re-install or contact your seller". I'm translating this from french... What is the problem? Do I have to make the "Sudo s" transformtions again, or is the ketxt file enouh? Medioevo, mine is also the Hercules shuttle pro : did you do something special? Thank you, folks! Link to comment Share on other sites More sharing options...
quattrofx Posted May 29, 2009 Author Share Posted May 29, 2009 Hi. I tried your new solution but it still does not work on my macbook pro. After the reboot, it says "the system extension can not be used" "the system extension System/Library/Extensions/ContourShuttle.kext has not been preoperly installed and can not be used. Please try to re-install or contact your seller". I'm translating this from french... What is the problem? Do I have to make the "Sudo s" transformtions again, or is the ketxt file enouh? Medioevo, mine is also the Hercules shuttle pro : did you do something special? Thank you, folks! Hi Daillou, Try to install my .Kext with small Application called "KextHelper" BR QuattroFX Link to comment Share on other sites More sharing options...
DAillou Posted June 6, 2009 Share Posted June 6, 2009 Hi Daillou, Try to install my .Kext with small Application called "KextHelper" BR QuattroFX Thank you so much : with kexthelper, thing seems to have installed properly! And finally, the shuttle pro can be used in applications! Still got a little problem : when I open the shuttle settings, I also have a "no device found" message. So, it seems impossile to change the default settings, or create new ones. Did I miss something again? Anyway, I still can learn the default settings and use them, so it's not much of a problem. Thank you again, quattrofx! Edit : Forget what I just wrote, I don't know what I first did because I tried again and now I can change the default settings without any problem ; so everything is fine now! I can use mu shuttle again, thanks to you! Link to comment Share on other sites More sharing options...
Mattnh Posted August 22, 2009 Share Posted August 22, 2009 I�am glad to hear that, Enrico!Wish you much Fun with it! PS QuattroFX Hey QuattroFX, I registered to this site just to thank you very much. I have a 'Hercules powered by Contour' as well. For quite some years in 'not fully working'-state. This got the whole thing working like it should. Like I wrote: Thank you very much! Link to comment Share on other sites More sharing options...
S-EH Posted November 21, 2009 Share Posted November 21, 2009 Hi QuattroFX, Nice work, possible to upload ContourShuttle.kext.zip once more to rapidshare or somewhere else ? thanks regards S-EH Link to comment Share on other sites More sharing options...
quattrofx Posted November 21, 2009 Author Share Posted November 21, 2009 Here it is, fresh one from QuattroFX´s Kitchen: http://www.kexts.com/view/223-contour_shuttle_pro.html Have a fun!!! BR QuattroFX Link to comment Share on other sites More sharing options...
S-EH Posted November 21, 2009 Share Posted November 21, 2009 Here it is, fresh one from QuattroFX´s Kitchen: http://rapidshare.com/files/310142911/Cont...huttle.kext.zip Have a fun!!! BR QuattroFX Thanks I seem to miss the train already :-( now it did work to download Thank you :-) regards S-EH Link to comment Share on other sites More sharing options...
steventhecat Posted January 30, 2010 Share Posted January 30, 2010 Does anyone have a kext that works for the ShuttlePRO v2 under OSX 10.6.2? I installed the 2.1.5 drivers from the CD (even more recent than the 2.1.4 drivers available on Contour's website), but at the end of the install I get an error. The ShuttlePRO v2 seems to work with the preset programs, but when I try to define new settings for Apple Logic, none of the settings work. Ideas? --- From my system info: ShuttlePRO v2: Product ID: 0x0030 Vendor ID: 0x0b33 Version: 1.17 Speed: Up to 1.5 Mb/sec Manufacturer: Contour Design Location ID: 0x26210000 Current Available (mA): 100 Current Required (mA): 100 Link to comment Share on other sites More sharing options...
quattrofx Posted March 31, 2010 Author Share Posted March 31, 2010 Good news from Contourdesign Companyl! They decided to go forward in time with 64Bit World and made newest 64Bit Beta Driver V2.2b for Shuttle, Shuttle Pro I & II with extended Support for all newest Applications: Adobe CS3 & CS4, Adobe Lightroom 2, FinalCutSuite 2 & 3, Juice 3, iMovie09, etc... Just download it from here and install: http://retail.contourdesign.com/?/products/23 If you have previous Version already installed, don´t worry, it will be updated automatically! Download my 64Bit ContourShuttle.Kext from the kexts.com Install expanded .kext with Kext Utility and reboot. Works 100% under 64Bit Snow Leopard! Tested with APremiere CS3, CS4 & CS5, iMovie09, FinalCutStudio 2 & 3... But please follow the Instructions on first install - be careful with "F" keys! Best Regards QuattroFX Link to comment Share on other sites More sharing options...
Recommended Posts