Jump to content

ALC663 Realtek HD-Sound issue

soulreaver1337

By soulreaver1337,
in Archive

 Share
51 posts in this topic

Recommended Posts

soulreaver1337
soulreaver1337
Posted
Posted

Hi,

i've searched for days, but didn't find anything. So i hope someone of you know a solution. I have a Realtek ALC663 Soundchip in my ASUS Notebook, but i didn't find a way to bring it working. I hope someone of you can help building a working solution. I also have made this codec extraction under linux but the apple hda patcher says that it is an unsupportet codec.

 

here is my codec.txt:

 

Codec: Realtek ID 663
Address: 0
Vendor Id: 0x10ec0663
Subsystem Id: 0x10431893
Revision Id: 0x100001
Default PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out
 Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
 Amp-Out vals:  [0x34 0x34]
 PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
 Power: 0x0
Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out
 Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
 Amp-Out vals:  [0x3a 0x3a]
 PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
 Power: 0x0
Node 0x04 [Audio Output] wcaps 0x41d: Stereo Amp-Out
 Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
 Amp-Out vals:  [0x40 0x40]
 PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
 Power: 0x0
Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x06 [Audio Output] wcaps 0x611: Stereo Digital
 PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
 Power: 0x0
Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In
 Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
 Amp-In vals:  [0x14 0x14]
 PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
 Power: 0x0
 Connection: 1
 0x23
Node 0x09 [Audio Input] wcaps 0x10051b: Stereo Amp-In
 Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
 Amp-In vals:  [0x0b 0x0b]
 PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
 Power: 0x0
 Connection: 1
 0x22
Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
 Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
 Amp-In vals:  [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x0f 0x0f] [0x80 0x80] [0x80 0x80] [0x80 0x80]
 Connection: 8
 0x18 0x19 0x1a 0x1b 0x1d 0x14 0x15 0x16
Node 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-In vals:  [0x00 0x00] [0x00 0x00]
 Connection: 2
 0x02 0x0b
Node 0x0d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-In vals:  [0x00 0x00] [0x80 0x80]
 Connection: 2
 0x03 0x0b
Node 0x0e [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-In vals:  [0x00 0x00] [0x80 0x80]
 Connection: 2
 0x04 0x0b
Node 0x0f [Audio Mixer] wcaps 0x20010a: Mono Amp-In
 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-In vals:  [0x80] [0x80]
 Connection: 2
 0x02 0x0b
Node 0x10 [Audio Output] wcaps 0x611: Stereo Digital
 PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
 Power: 0x0
Node 0x11 [Pin Complex] wcaps 0x400700: Mono Digital
 Pincap 0x0810: OUT
 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
 Pin-ctls: 0x40: OUT
 Power: 0x0
 Connection: 1
 0x10
Node 0x12 [Pin Complex] wcaps 0x400401: Stereo
 Pincap 0x0820: IN
 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
 Pin-ctls: 0x00:
 Power: 0x0
Node 0x13 [Pin Complex] wcaps 0x400401: Stereo
 Pincap 0x0820: IN
 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
 Pin-ctls: 0x00:
 Power: 0x0
Node 0x14 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-Out vals:  [0x00 0x00]
 Pincap 0x081003c: IN OUT HP EAPD Detect
 Pin Default 0x99130110: [Fixed] Speaker at Int ATAPI
Conn = ATAPI, Color = Unknown
 Pin-ctls: 0xc0: OUT HP
 Power: 0x0
 Connection: 2
 0x0c* 0x0d
Node 0x15 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-Out vals:  [0x00 0x00]
 Pincap 0x081003c: IN OUT HP EAPD Detect
 Pin Default 0x0121441f: [Jack] HP Out at Ext Rear
Conn = 1/8, Color = Green
 Pin-ctls: 0xc0: OUT HP
 Power: 0x0
 Connection: 2
 0x0c* 0x0d
Node 0x16 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-Out vals:  [0x80 0x80]
 Pincap 0x0834: IN OUT Detect
 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
 Pin-ctls: 0x20: IN
 Power: 0x0
 Connection: 1
 0x0e
Node 0x17 [Pin Complex] wcaps 0x40050c: Mono Amp-Out
 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-Out vals:  [0x00]
 Pincap 0x0810: OUT
 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
 Pin-ctls: 0x40: OUT
 Power: 0x0
 Connection: 1
 0x0f
Node 0x18 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
 Amp-In vals:  [0x03 0x03]
 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-Out vals:  [0x80 0x80]
 Pincap 0x081734: IN OUT Detect
 Pin Default 0x01a19840: [Jack] Mic at Ext Rear
Conn = 1/8, Color = Pink
 Pin-ctls: 0x24: IN
 Power: 0x0
 Connection: 1
 0x0e
Node 0x19 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
 Amp-In vals:  [0x00 0x00] [0x00 0x00] [0x00 0x00]
 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-Out vals:  [0x80 0x80]
 Pincap 0x08173c: IN OUT HP Detect
 Pin Default 0x99a3094f: [Fixed] Mic at Int ATAPI
Conn = ATAPI, Color = Unknown
 Pin-ctls: 0x21: IN
 Power: 0x0
 Connection: 3
 0x0c* 0x0d 0x0e
Node 0x1a [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
 Amp-In vals:  [0x00 0x00]
 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-Out vals:  [0x80 0x80]
 Pincap 0x081734: IN OUT Detect
 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
 Pin-ctls: 0x20: IN
 Power: 0x0
 Connection: 1
 0x0d
Node 0x1b [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
 Amp-In vals:  [0x00 0x00] [0x00 0x00] [0x00 0x00]
 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-Out vals:  [0x00 0x00]
 Pincap 0x08173c: IN OUT HP Detect
 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
 Pin-ctls: 0x40: OUT
 Power: 0x0
 Connection: 3
 0x0c* 0x0d 0x0e
Node 0x1c [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x1d [Pin Complex] wcaps 0x400400: Mono
 Pincap 0x0820: IN
 Pin Default 0x598301f0: [N/A] Line In at Int ATAPI
Conn = ATAPI, Color = Unknown
 Pin-ctls: 0x20: IN
 Power: 0x0
Node 0x1e [Pin Complex] wcaps 0x400780: Mono Digital
 Pincap 0x0814: OUT Detect
 Pin Default 0x99430130: [Fixed] SPDIF Out at Int ATAPI
Conn = ATAPI, Color = Unknown
 Pin-ctls: 0x40: OUT
 Power: 0x0
 Connection: 1
 0x06
Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
Node 0x21 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-Out vals:  [0x00 0x00]
 Pincap 0x081c: OUT HP Detect
 Pin Default 0x01211420: [Jack] HP Out at Ext Rear
Conn = 1/8, Color = Black
 Pin-ctls: 0xc0: OUT HP
 Power: 0x0
 Connection: 3
 0x0c 0x0d* 0x0e
Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-In vals:  [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
 Connection: 10
 0x18 0x19 0x1a 0x1b 0x1d 0x14 0x15 0x16 0x0b 0x12
Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-In vals:  [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
 Connection: 10
 0x18 0x19 0x1a 0x1b 0x1d 0x14 0x15 0x16 0x0b 0x13

 

Thanks to you all who can help me :(

 

PS: sorry for my bad english. I'm from germany ;)

 

 

Edit: I have installed JAS 10.5.4 Client/Server and updated it to 10.5.5

Link to comment
Share on other sites
dandaman1976
dandaman1976
Posted
Posted

dude, you are wasting time, I have been asking this question for 2 months, and NO ONE has responded, not even to say its not supported, NOTHING... so for now he have nothing...

 

I have an asus m70vm and i am in the same boat with an alc663 - NOTHING...

Link to comment
Share on other sites
dandaman1976
dandaman1976
Posted
Posted

no that is true, first question i had was how to do a DUMP CODEC, no responce, so google helped, second, was did anyone have an idea for the alc663 card, anything with 663 is someones post, was not even acknowledged... going back to someone else from 9/1.

 

I guess its a asus card favorite and not many people are using our computers with alc663 so we have a long wait....

 

its the last piece to my system workings and i have been waiting a long time. I heard that taurga works for efi-x now and any hope though him is no gone... can not confirm it.

 

I been around google and there really as of now is no hope for us... like i said that could change - people have been waiting months for a solution on other cards, so we too must, wait. Glad you came along, i was really feeling like i was the only one.

 

If i find any progress i will let you know - please do the same...

Link to comment
Share on other sites
dandaman1976
dandaman1976
Posted
Posted
i'm on the way to try patch the AppleHDA.kext on my own to let it work. if i got it, i'll post the file in this thread ;)

you are the man, i hope you have success ; ) because i would love it!

 

but seriously - if you post it i would be so damn happy - i thank you in advance....

Link to comment
Share on other sites
soulreaver1337
soulreaver1337
Posted
  • Author
Posted
you are the man, i hope you have success ; ) because i would love it!

 

but seriously - if you post it i would be so damn happy - i thank you in advance....

 

 

 

 

no problem. i want to have sound. in the patch_realtek.c the 663 is in the chipgroup of the 662 chip. i have a modded AppleHDA.kext of the 662 and try to edit it. by the way, my wlan needs a driver. i have a intel 5100 agn. do you know which one works?

Link to comment
Share on other sites
dandaman1976
dandaman1976
Posted
Posted
no problem. i want to have sound. in the patch_realtek.c the 663 is in the chipgroup of the 662 chip. i have a modded AppleHDA.kext of the 662 and try to edit it. by the way, my wlan needs a driver. i have a intel 5100 agn. do you know which one works?

you and i have the same specs and the bluetooth works, but there is NO HOPE at all for the 5100 card,

http://forum.insanelymac.com/index.php?sho...rt=#entry940522

 

the atheros 928x chip = no hope....

 

i am using a wireless usb card that i had lying around... the zyxel g220 works perfectly

Link to comment
Share on other sites
soulreaver1337
soulreaver1337
Posted
  • Author
Posted

ok, i'm on the way :)

now i have 

Intel High Definition Audio:

 Geräte-ID:	0x10431893
 Audio-ID:	662
 Verfügbare Geräte:
 Line-Out:
 Verbindung:	1/8 Zoll-Buchse
 Mikrofon:
 Verbindung:	1/8 Zoll-Buchse
 Mikrofon:
 Verbindung:	1/8 Zoll-Buchse
 Line-In:
 Verbindung:	1/8 Zoll-Buchse
 Kopfhörer:
 Verbindung:	1/8 Zoll-Buchse
 S/P-DIF-Ausgang:
 Verbindung:	Combo

 

but i don't have any audio devices under the sound category in the system-sound-configuration :(

anyone have an idea?

Link to comment
Share on other sites
OcciJano
OcciJano
Posted
Posted
ok, i'm on the way :P

now i have 

Intel High Definition Audio:

 Geräte-ID:	0x10431893
 Audio-ID:	662
 Verfügbare Geräte:
 Line-Out:
 Verbindung:	1/8 Zoll-Buchse
 Mikrofon:
 Verbindung:	1/8 Zoll-Buchse
 Mikrofon:
 Verbindung:	1/8 Zoll-Buchse
 Line-In:
 Verbindung:	1/8 Zoll-Buchse
 Kopfhörer:
 Verbindung:	1/8 Zoll-Buchse
 S/P-DIF-Ausgang:
 Verbindung:	Combo

 

but i don't have any audio devices under the sound category in the system-sound-configuration :P

anyone have an idea?

 

Hi, if you're basing in some of my modded 662 kexts, then I can suggest you to:

1 AppleHDA/Contents/PlugIns/HDAEnabler.kext/Contents/MacOS/HDAEnabler use HexEdit, find 6206EC10 change to 6306EC10

2 AppleHDA/Contents/PlugIns/AppleHDAController.kext/Contents/Info.plist use PlistEdit Pro, look for the second HDAConfigDefaultwith LayoutID 662, in ConfigData put your 663 codecverb.

3 AppleHDA/Contents/Info.plist use PlistEdit Pro, look for the second CodecInfo (ID662), change 283903586 to 283903587

4 Also in AppleHDA/Contents/Info.plist, look inside the second Layouts, look for CodecID change 283903586 to 283903587

5 Also in AppleHDA/Contents/Info.plist look for the second PathMap (ID662) change it acording to your ALC 663 LinuxDump.

 

If you need any help, just tell me.

Good Luck.

 

OcciJano

Link to comment
Share on other sites
soulreaver1337
soulreaver1337
Posted
  • Author
Posted
Hi, if you're basing in some of my modded 662 kexts, then I can suggest you to:

1 AppleHDA/Contents/PlugIns/HDAEnabler.kext/Contents/MacOS/HDAEnabler use HexEdit, find 6206EC10 change to 6306EC10

2 AppleHDA/Contents/PlugIns/AppleHDAController.kext/Contents/Info.plist use PlistEdit Pro, look for the second HDAConfigDefaultwith LayoutID 662, in ConfigData put your 663 codecverb.

3 AppleHDA/Contents/Info.plist use PlistEdit Pro, look for the second CodecInfo (ID662), change 283903586 to 283903587

4 Also in AppleHDA/Contents/Info.plist, look inside the second Layouts, look for CodecID change 283903586 to 283903587

5 Also in AppleHDA/Contents/Info.plist look for the second PathMap (ID662) change it acording to your ALC 663 LinuxDump.

 

If you need any help, just tell me.

Good Luck.

 

OcciJano

 

 

like i wrote you in the PM, here are the files:

http://funhof.de/daten/alc663.zip

 

thanks

Link to comment
Share on other sites
dandaman1976
dandaman1976
Posted
Posted
like i wrote you in the PM, here are the files:

http://funhof.de/daten/alc663.zip

 

thanks

 

 

Ok this is not the final 663 right?

 

because i installed this kext and system profiler shows it as 662

 

"

Device ID: 0x104311C3

Audio ID: 662

Available Devices:

Headphone:

Connection: 1/8 inch Jack

Line Out:

Connection: 1/8 inch Jack

Line In:

Connection: 1/8 inch Jack

Line Out:

Connection: 1/8 inch Jack

Microphone:

Connection: 1/8 inch Jack

Line Out:

Connection: 1/8 inch Jack

S/P-DIF Out:

Connection: Optical

"

 

so i am assuming this is a work in progress right?

 

thanks for you replies...

Link to comment
Share on other sites
OcciJano
OcciJano
Posted
Posted
like i wrote you in the PM, here are the files:

http://funhof.de/daten/alc663.zip

 

thanks

 

Hi soulreaver1337, this is what I could do for you, cos' I don't have an ALC 663 to try it. ALC_663.zip

I will post the graph maybe someone can help to advance further 663hex.pdf

 

Now you have to try the values in AppleHDA/Contents/Info.plist (PathMap Id663) to make it work, change whatever you like, you can have many copies of Info.plist you like, because only the one named Info.plist is used.

It's going to be a really hard work.

 

Good Luck

 

OcciJano

Link to comment
Share on other sites
soulreaver1337
soulreaver1337
Posted
  • Author
Posted
Hi soulreaver1337, this is what I could do for you, cos' I don't have an ALC 663 to try it. ALC_663.zip

I will post the graph maybe someone can help to advance further 663hex.pdf

 

Now you have to try the values in AppleHDA/Contents/Info.plist (PathMap Id663) to make it work, change whatever you like, you can have many copies of Info.plist you like, because only the one named Info.plist is used.

It's going to be a really hard work.

 

Good Luck

 

OcciJano

 

 

Ok, I'll give it a try :)

Thank you for your help :)

Link to comment
Share on other sites
soulreaver1337
soulreaver1337
Posted
  • Author
Posted

ok, now i have

 

Intel High Definition Audio:

 Geräte-ID:	0x10431893
 Audio-ID:	663
 Verfügbare Geräte:
 Lautsprecher:
 Verbindung:	Intern
 Kopfhörer:
 Verbindung:	1/8 Zoll-Buchse
 Mikrofon:
 Verbindung:	1/8 Zoll-Buchse
 Mikrofon:
 Verbindung:	Intern
 S/P-DIF-Ausgang:
 Verbindung:	Intern
 Kopfhörer:
 Verbindung:	1/8 Zoll-Buchse

 

i've tried some node-configurations in AppleHDA/Contents/Info.plist under Root>IOKitPersonalities>HDA Driver>PathMaps>1 but until now with no success. under sound is no device listed. i have uploaded a screenshot of the sound window as attachment

foto.tiff

Link to comment
Share on other sites
OcciJano
OcciJano
Posted
Posted
i've tried some node-configurations in AppleHDA/Contents/Info.plist under Root>IOKitPersonalities>HDA Driver>PathMaps>1 but until now with no success. under sound is no device listed. i have uploaded a screenshot of the sound window as attachment

 

Well, I had the same empty in/out under sound while I was dealing with my ALC662, be patetient, try little node-configurations first, you need to get a Mic or Line-out showing first. then try to increment it, by adding another node-configuration entry, it's going to be a hard work.

In the PathMaps node-configurations for 663 you need to put first Mics or Line-Ins, next will be Speakers, Line-Outs, Headphones.

Maybe I'm wrong, but you're limited to 5 principal entries in PathMaps.

If you take a look at the graph there's a (0x10 Stereo Digital) ---> (0x11 [N/A] Speaker at Ext Rear Mono Digital OUT), I didn't declared it in your PathMap cos', some changes produce a kernel panic at startup.

Do you have another partition or hard disk with a working system? In that case you can try wildest combinations.

So you can startup using the other system, fix the bad AppleHDA.kext and do this in terminal (replace tiger with the name of the one you're fixing):

 

chmod -R 755 /Volumes/Tiger/System/Library/Extensions/AppleHDA.kext

chown -R root:wheel /Volumes/Tiger/System/Library/Extensions/AppleHDA.kext

rm /Volumes/Tiger/System/Library/Extensions.mkext

diskutil repairPermissions /Volumes/Tiger/System/Library/Extensions/

 

I'm still working on ALC662, so if I see in another thread a finding, or maybe have a own finding, I will share with you.

Link to comment
Share on other sites
soulreaver1337
soulreaver1337
Posted
  • Author
Posted
Well, I had the same empty in/out under sound while I was dealing with my ALC662, be patetient, try little node-configurations first, you need to get a Mic or Line-out showing first. then try to increment it, by adding another node-configuration entry, it's going to be a hard work.

In the PathMaps node-configurations for 663 you need to put first Mics or Line-Ins, next will be Speakers, Line-Outs, Headphones.

Maybe I'm wrong, but you're limited to 5 principal entries in PathMaps.

If you take a look at the graph there's a (0x10 Stereo Digital) ---> (0x11 [N/A] Speaker at Ext Rear Mono Digital OUT), I didn't declared it in your PathMap cos', some changes produce a kernel panic at startup.

Do you have another partition or hard disk with a working system? In that case you can try wildest combinations.

So you can startup using the other system, fix the bad AppleHDA.kext and do this in terminal (replace tiger with the name of the one you're fixing):

 

chmod -R 755 /Volumes/Tiger/System/Library/Extensions/AppleHDA.kext

chown -R root:wheel /Volumes/Tiger/System/Library/Extensions/AppleHDA.kext

rm /Volumes/Tiger/System/Library/Extensions.mkext

diskutil repairPermissions /Volumes/Tiger/System/Library/Extensions/

 

I'm still working on ALC662, so if I see in another thread a finding, or maybe have a own finding, I will share with you.

 

 

 

the main thing which is confusing me is this {censored} 0 1 2 3 4 5 seperation in the plist file. i always don't know which number is what and then if you go in 0 which should be the mic there is suddenly again a 0 1 where only should be a 0 if i can trust the tutorials for patching applehda.kext files :rolleyes: That is my main problem. to know which number is what. the node numbers gave me the applehda patcher by taruga. it printed out 

	Back Mic: 9 34 24

 Line In  : 8 35 26

 Speaker  : 20 12 2

 LineOut 1: 21 13 3 

 Headphone: 27 38 37

 Spdif Out: 30 6

 

could be a last help that you say which is what?

 

like:

 

Root>IOKitPersonalities>HDA Driver>PathMaps>1>0 = Mic

Root>IOKitPersonalities>HDA Driver>PathMaps>1>1 = LineIn

...

there are 5 or 6 ones in the plist file. but not with only one path to the nodes. normally, for example, there should be one path until the last part where 3 nodes have to be configured for the mic. but in the middle there are suddenly 2 like i wrote above.

 

sorry if i steal your time but like i said, i'm a mac newbie :rolleyes:

Link to comment
Share on other sites
soulreaver1337
soulreaver1337
Posted
  • Author
Posted
Hi soulreaver1337, we all AppleHDA newbies, but we're trying, OK?

 

Here's a slimmed version, with Taruga's like PathMap, so it will be easier to work with.

AppleHDA.slimmed.zip

 

hey, im writing something here, but don't think i'm not trying again and again ;)

i only want to get informations with my questions from persons who know more about it than me ;)

Link to comment
Share on other sites
  • 2 weeks later...
dandaman1976
dandaman1976
Posted
Posted
I am in the same situation! really need this god damn thing working!!! I would pay the guy who made this fully working!

dude i have been trying and waiting since september... this guy who started the thread was so close, but has not been heard from since nov 5th, i chek daily, and i hope to hear from him soon...

Link to comment
Share on other sites
  • 4 weeks later...
soulreaver1337
soulreaver1337
Posted
  • Author
Posted
dude i have been trying and waiting since september... this guy who started the thread was so close, but has not been heard from since nov 5th, i chek daily, and i hope to hear from him soon...

 

sorry, but i have changed to ubuntu linux for the first time. i thought i wait a little bit and i hope apple will build in some of these chips because i also tried million of configurations without any success :rolleyes:

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...