binaryphr3k Posted August 22, 2008 Share Posted August 22, 2008 hi i am new to this forum and to the whole osx86 theme currently i chose to use osx86 for the power it comes with.... (even though the whole OS is based on the BSD kernel)... i managed to download and burn Kalyway 10.5.1 sse2,sse3 (intel only) and installed it on my machine... here are my machines specs.. Chipset: Intel® 945GC CPU: Intel® Pentium® 4 Processor 641 Hyper-Threading and Intel EM64T Technology going @ 3.20GHz ram: 2gb ddr2 667mhz HDD: 160GB SATA II (7200rpm, 2MB Cache) Video: Intel® Graphics Media Accelerator 950 Up to 224MB Shared Video Memory Intel 10/100 Ethernet LAN (RJ-45 port) wich is integrated with the motherboard... and i have a second ethernet LAN card wich is a linksys etherfast PCI adapter 10/100 my machine has been running windows xp sp2 and i managed to partition the hdd into 2 partitions using gparted and i installed kalyway 10.5.1 using these prefernces: bootloader: MBR drivers -> sound -> azillia_out.. after i restarted my machine the darwin bootloader came up and i selected my osx partition booted it using the "tohkernel -f -v" and all worked well.....i got sound and everything except for the LAN now currently i have the LAN cable hooked up with my linksys adapter (since the intel driver doesnt wanna install on my windows partition) and i really need help with getting internet on my osx86 partition.. note:when i booted into osx86 for the first time i checked that "my computer does no connect to the internet" i am still new to os x and if someone can tell me how to put it on my osx86 partition it would be great thanks in advance.. Link to comment Share on other sites More sharing options...
binaryphr3k Posted August 22, 2008 Author Share Posted August 22, 2008 anyone..... Link to comment Share on other sites More sharing options...
Gujal Posted August 22, 2008 Share Posted August 22, 2008 Give the exact model number of motherboard and the linksys adapter. Both of them make numerous models and we cannot guess what chipset they are using. Link to comment Share on other sites More sharing options...
binaryphr3k Posted August 22, 2008 Author Share Posted August 22, 2008 i apologize for the lack of info...but here are the model numbers of both my mobo and my linksys adapter.. Adapter: Linksys LNE100TX Fast Ethernet Adapter(LNE100TX v4) motherBoard: Intel Corporation D945GCCRG1 AAD86518-300 just postreply if anymore info is needed also i forgot to mention is there anyway of updating from 10.5.1 -> 10.5.4 or will that ruin the hacked kernel??..and if i update it will it fix my LAN problem..?? please someone help... Link to comment Share on other sites More sharing options...
LTL Posted August 22, 2008 Share Posted August 22, 2008 hi i am new to this forum and to the whole osx86 theme currently i chose to use osx86 for the power it comes with....(even though the whole OS is based on the BSD kernel)... i managed to download and burn Kalyway 10.5.1 sse2,sse3 (intel only) and installed it on my machine... here are my machines specs.. Chipset: Intel® 945GC CPU: Intel® Pentium® 4 Processor 641 Hyper-Threading and Intel EM64T Technology going @ 3.20GHz ram: 2gb ddr2 667mhz HDD: 160GB SATA II (7200rpm, 2MB Cache) Video: Intel® Graphics Media Accelerator 950 Up to 224MB Shared Video Memory Intel 10/100 Ethernet LAN (RJ-45 port) wich is integrated with the motherboard... and i have a second ethernet LAN card wich is a linksys etherfast PCI adapter 10/100 my machine has been running windows xp sp2 and i managed to partition the hdd into 2 partitions using gparted and i installed kalyway 10.5.1 using these prefernces: bootloader: MBR drivers -> sound -> azillia_out.. after i restarted my machine the darwin bootloader came up and i selected my osx partition booted it using the "tohkernel -f -v" and all worked well.....i got sound and everything except for the LAN now currently i have the LAN cable hooked up with my linksys adapter (since the intel driver doesnt wanna install on my windows partition) and i really need help with getting internet on my osx86 partition.. note:when i booted into osx86 for the first time i checked that "my computer does no connect to the internet" i am still new to os x and if someone can tell me how to put it on my osx86 partition it would be great thanks in advance.. if you want to make your life easy, buy the same ethernet card that is in my signature, its natively supported and works perfectly. It was like 10USD otherwise, your going to have to provide us with your motherboard type and model number, find out the chipset used for ethernet good job so far Link to comment Share on other sites More sharing options...
binaryphr3k Posted August 22, 2008 Author Share Posted August 22, 2008 nice but is their another way of doing it...cause buying a new pci adapter is gonna make my machine unstable.. and it is a great find for about 10.00USD..... and here is the chipset for my linksys adapter: chipset for v4.0: ADMtek AN985 chipset for v5.0: ADMtek AN985 (rev 17) Link to comment Share on other sites More sharing options...
LTL Posted August 22, 2008 Share Posted August 22, 2008 nice but is their another way of doing it...cause buying a new pci adapter is gonna make my machine unstable.. and it is a great find for about 10.00USD..... and here is the chipset for my linksys adapter: chipset for v4.0: ADMtek AN985 chipset for v5.0: ADMtek AN985 (rev 17) Ok, now you need to search for the forum and google search google: ADMtek AN985 insanelymac search: AN985 insanelymac search: AN985 OSX86 etc We can't search for you, but glad to show you the way Altho, i believe you SOL with that chipset Link to comment Share on other sites More sharing options...
binaryphr3k Posted August 22, 2008 Author Share Posted August 22, 2008 bro i couldn't find it i searched everywhere..google,forums,torrents....any ideas..and if you have it can you post reply the link or PM me it...?? thanks in advance.. also when i booted into kalyway it didnt recognize any cards not even my cpu model.....im not sure but should i install leopard4all or iatkos?? Link to comment Share on other sites More sharing options...
binaryphr3k Posted August 23, 2008 Author Share Posted August 23, 2008 edit: iatkos crashes and hangs randomly and leo4all v3 just stay giving me "BSD root error: 14 major, 5 minor" or something like that ..kalyway was the stablist version since my machine's running a 945gc chipset... Link to comment Share on other sites More sharing options...
Gujal Posted August 23, 2008 Share Posted August 23, 2008 For the linksys card, there is an older tiger kext available. SHould work on Leo too. Give it a try. Also try setting the IP Address manually as someone had mentioned about DHCP issues with the Tulip kext on Leo. Couldnt find a driver for your onboard Intel 82562G Ethernet. keep searching Link to comment Share on other sites More sharing options...
binaryphr3k Posted August 23, 2008 Author Share Posted August 23, 2008 wait i unzipped it and all but how do i install it (srry bro im a total newb when it comes to os x) EDIT:Do i move the unzipped folder to the "extensions folder" or do i open a terminal and use the "./make" command???? Link to comment Share on other sites More sharing options...
binaryphr3k Posted August 23, 2008 Author Share Posted August 23, 2008 i think i know whats the rpoblem....my machine when running in a osx envirment doesnt recognize Any PCI cards...Not even my proccessor model (just the speed)....is there any patch that can fix it..?????? Link to comment Share on other sites More sharing options...
Gujal Posted August 24, 2008 Share Posted August 24, 2008 You can use Kext Helper to install the kext Link to comment Share on other sites More sharing options...
binaryphr3k Posted August 24, 2008 Author Share Posted August 24, 2008 wow thanks dude i will reply after i manage to install...... ok so here's what happened... i went to "About this MAC -> More Info... -> PCI Cards -> "This computer does not appear to have any PCI cards installed" i dont know why it is not recognizing the PCI ethernet adapter i have it installed although the kext was installed perfectly and everything went well (also i didnt get a Kernel Panic).....is there a program for osx86 ...Kalyway 10.5.1 to be exact wich finds the PCI Card and registers it.....please anyone i really need to get a network connection on this thing...T_T. Link to comment Share on other sites More sharing options...
Gujal Posted August 24, 2008 Share Posted August 24, 2008 You should be going into System Preferences-> Network to see if you card is sensed. About this MAC -> More info works correctly only on a real mac. On a hac the More Info only works for a few options such as ATA, SATA, etc Link to comment Share on other sites More sharing options...
binaryphr3k Posted August 24, 2008 Author Share Posted August 24, 2008 sure thing i will test it out now edit: it's not recognizing it cause i couldn't find it in the modem area also i am not getting a ethernet connection only a dial-up connection. any ideas??? Link to comment Share on other sites More sharing options...
Gujal Posted August 24, 2008 Share Posted August 24, 2008 run the following command in terminal sudo dmesg >console.txt this will generate a file called console.txt with all bootup messages. zip it and attach it with your reply here. someone may help you EDIT: Fount this post which has a modified kext for Linksys LNE100TX. Try the kext from there Link to comment Share on other sites More sharing options...
binaryphr3k Posted August 24, 2008 Author Share Posted August 24, 2008 the modified kext worked and i get a network connection........thank you all for your help i couldn't have done this with out you all....and i will keep that kext for later on.... also if you wanted to know the console.txt.....well here it is... before i installed the kext... hi mem tramps at 0xffe00000 PAE enabled 64 bit mode enabled enabling INTEL features Darwin Kernel Version 9.1.0: Sat Nov 17 02:56:34 SCT 2007; made by ToH:xnu-1228.0.2~1/BUILD/obj/RELEASE_I386 standard timeslicing quantum is 10000 us vm_page_bootstrap: 507898 free pages and 16390 wired pages mig_table_max_displ = 79 HTT: 1 core per package; 2 logical cpus per package Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style. ACPI CA 20060421 AppleACPICPU: ProcessorApicId=1 LocalApicId=0 Enabled AppleACPICPU: ProcessorApicId=2 LocalApicId=1 Enabled AppleACPICPU: ProcessorApicId=3 LocalApicId=130 Disabled AppleACPICPU: ProcessorApicId=4 LocalApicId=131 Disabled Loading security extension com.apple.nke.applicationfirewall Loading security extension com.apple.security.seatbelt calling mpo_policy_init for mb Seatbelt MACF policy initialized Security policy loaded: Seatbelt Policy (mb) Loading security extension com.apple.security.TMSafetyNet calling mpo_policy_init for TMSafetyNet Security policy loaded: Safety net for Time Machine (TMSafetyNet) Copyright © 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. MAC Framework successfully initialized using 10485 buffer headers and 4096 cluster IO buffer headers IOAPIC: Version 0x20 Vectors 64:87 ACPI: System State [s0 S3 S4 S5] (S3) Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style. Extension "com.apple.driver.ApplePCIConfigurator" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style. Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style. mbinit: done Security auditing service present BSM auditing present From path: "uuid", Waiting for boot volume with UUID 89419B4E-3F4F-30A0-82BB-84B518D091E5 Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict> AppleIntelPIIXPATA: Secondary PCI IDE channel is disabled Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/IDES@1F,2/AppleIntelPIIXATARoot/PRIM@0/AppleIntelICHxSATA/ATADeviceNub@0/AppleATADiskDriver/IOATABlockStorageDevice/IOBlockStorageDriver/Hitachi HDS721616PLA380 Hitachi HDS721616PLA380/IOFDiskPartitionScheme/Untitled 2@2 BSD root: disk0s2, major 14, minor 2 Jettisoning kernel linker. Resetting IOCatalogue. display: family specific matching fails Matching service count = 1 Matching service count = 2 Matching service count = 2 Matching service count = 2 Matching service count = 2 Matching service count = 2 Apple16X50ACPI1: Identified Serial Port on ACPI Device=UAR1 Apple16X50UARTSync1: Detected 16550AF/C/CF FIFO=16 MaxBaud=115200 display: family specific matching fails display: family specific matching fails display: family specific matching fails dsmos: Initializing... dsmos: Hook and decryption contexts set! dsmos: Starting... display: family specific matching fails NTFS driver 2.0 [Flags: R/O]. NTFS volume name , version 3.1. and here is after i installed the kext.... npvhash=4095 hi mem tramps at 0xffe00000 PAE enabled 64 bit mode enabled enabling INTEL features Darwin Kernel Version 9.1.0: Sat Nov 17 02:56:34 SCT 2007; made by ToH:xnu-1228.0.2~1/BUILD/obj/RELEASE_I386 standard timeslicing quantum is 10000 us vm_page_bootstrap: 507898 free pages and 16390 wired pages mig_table_max_displ = 79 HTT: 1 core per package; 2 logical cpus per package Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style. ACPI CA 20060421 AppleACPICPU: ProcessorApicId=1 LocalApicId=0 Enabled AppleACPICPU: ProcessorApicId=2 LocalApicId=1 Enabled AppleACPICPU: ProcessorApicId=3 LocalApicId=130 Disabled AppleACPICPU: ProcessorApicId=4 LocalApicId=131 Disabled Loading security extension com.apple.nke.applicationfirewall Loading security extension com.apple.security.seatbelt calling mpo_policy_init for mb Seatbelt MACF policy initialized Security policy loaded: Seatbelt Policy (mb) Loading security extension com.apple.security.TMSafetyNet calling mpo_policy_init for TMSafetyNet Security policy loaded: Safety net for Time Machine (TMSafetyNet) Copyright © 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. MAC Framework successfully initialized using 10485 buffer headers and 4096 cluster IO buffer headers IOAPIC: Version 0x20 Vectors 64:87 ACPI: System State [s0 S3 S4 S5] (S3) Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style. Extension "com.apple.driver.ApplePCIConfigurator" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style. Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style. mbinit: done Security auditing service present BSM auditing present From path: "uuid", Waiting for boot volume with UUID 89419B4E-3F4F-30A0-82BB-84B518D091E5 Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict> AppleIntelPIIXPATA: Secondary PCI IDE channel is disabled Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/IDES@1F,2/AppleIntelPIIXATARoot/PRIM@0/AppleIntelICHxSATA/ATADeviceNub@0/AppleATADiskDriver/IOATABlockStorageDevice/IOBlockStorageDriver/Hitachi HDS721616PLA380 Hitachi HDS721616PLA380/IOFDiskPartitionScheme/Untitled 2@2 BSD root: disk0s2, major 14, minor 2 Jettisoning kernel linker. Resetting IOCatalogue. display: family specific matching fails Matching service count = 1 Matching service count = 2 Matching service count = 2 Matching service count = 2 Matching service count = 2 Matching service count = 2 Apple16X50ACPI1: Identified Serial Port on ACPI Device=UAR1 Apple16X50UARTSync1: Detected 16550AF/C/CF FIFO=16 MaxBaud=115200 darwin_tulip loaded darwin_tulip_admtek985 or one of its subclasses. darwin_tulip vendorID = 0x1317 deviceID = 0x0985 revisionID = 0x0011 darwin_tulip subSystemVendorID = 0x1317 subSystemID = 0x0574 EEPROM contents: MAC Addr: 00:14:bf:54:cb:c5 display: family specific matching fails display: family specific matching fails display: family specific matching fails dsmos: Initializing... dsmos: Hook and decryption contexts set! dsmos: Starting... display: family specific matching fails darwin_tulip_admtek985: Ethernet address 00:14:bf:54:cb:c5 NTFS driver 2.0 [Flags: R/O]. NTFS volume name , version 3.1. _waitForNegotiation, failed with status = 0x7849, control = 1000 setMedium, autonegotiation failed, forcing speed = 10 duplex = half _waitForNegotiation, failed with status = 0x7849, control = 0000 MII PhyStatus: 7849 link is down MII PhyStatus: 784d link is up 20 thank you all for your help Link to comment Share on other sites More sharing options...
binaryphr3k Posted August 24, 2008 Author Share Posted August 24, 2008 Though i Get Internet i Get speeds of 0.5 kb - 10 kb per second maximum......and when i go to network it recognizing ethernet but tells me that it's not connected.....any ideas??? EDIT: After tampiring with settings for a bit i got it to tell me thats it's connected and i got a 10kb incresae in speed....now i have a maximum of 20 kb per sec... Link to comment Share on other sites More sharing options...
binaryphr3k Posted August 25, 2008 Author Share Posted August 25, 2008 would changing the DNS to 4.2.2.2 do anything??..............because alot of people were telling me to do that...anyone??? Link to comment Share on other sites More sharing options...
Recommended Posts