iDeneb v1 10.5.4

[mandrsn1]

I can't get the DVD to boot my me SSE2 system. Any advice?

[Cris900]

I have a Celeron SSE2, and works well ......

[mandrsn1]

I have a Celeron SSE2, and works well ......

 

weird, are you booting with any specific commands? I get to the apple screen and it goes gray and says it needs to reboot.

[sepulchre]

....anything else I should do before typing exit to boot?

 

I think that was all I did, try it

[filip007]

Installs ok, Everthing goes smoothly until I get to the main apple configuration screen (after the welcome screen), it asks if I have data to transfer over from another mac etc, select no, and then it just loops back to welcome screen again! annoyed because it looked very smooth until then.....have tried a number of different kernels/options without luck.

Abit IP35pro

Quad core 6600

6GB

Nvidia 8800GTX 768MB

2 x 500GB SATA HD in AHCI Mode

1 x Samsung SATA DVD Writer in AHCI Mode

 

Your net card si not supported...MAC must have working NET card.

Get your self a Realtek 8139D it works by it self autodetected by MAC and it works without driver.

or use This system is not connected to internet or something...?

[Cris900]

weird, are you booting with any specific commands? I get to the apple screen and it goes gray and says it needs to reboot.

This happens after the installation? What did you selected? Your motherboard?

Try Boot with F8 and then write -v ....and tell us the error

[mandrsn1]

This happens after the installation? What did you selected? Your motherboard?

Try Boot with F8 and then write -v ....and tell us the error

 

ok i will try it again. This is happing when booting from the DVD to install.

 

I don't know my motherboard, my computer is an IBM T43. I am running Kalyway 10.5.1 currently.

[Cris900]

If you have a processor intel, select:

Kernel Sleep

ICHx Fix (I do not remember if I selected this, but I think yes)

and what is needed for your hardware ....

[darrelld]

I am so excited to try a new distro on my Dell D630. I've had much success with Leo4Allv1-3 and iDeneb seems like a perfect progression. Thanks Punk92, et al for all your hard work. I just wish I could get beyond the install disk hanging at: IOAPIC: Version 0x20 Vectors 0:23. I've tried different boot options to include -x cpus=1 maxmem=2048 noapic and others, but still have had no success. Can anyone steer me in the right direction?

 

My D630 has these specs:

4GB memory

Intel T7500

120GB SATA, not set to AHCI

Intel Crestline Graphics GM965 Express

wxga 1280x800

Sigmatel 9205

Dell Wireless

Bluetooth

[mandrsn1]

This happens after the installation? What did you selected? Your motherboard?

Try Boot with F8 and then write -v ....and tell us the error

 

I get a kernel panic with AppleSMCPDRC when trying to boot the DVD to install.

[gurukool]

I have Inspiron 1501...tried this distro....installation went perfect.. ....but looks like it did not detect my wireless card BCM4312(dell 1490) and also while booting it says keyboard not found....so i cannot enter the name and other detail screen

am i missing something here...leo4allV3 works perfect except the QE/CI(since my card 200m doesn't have drivers )....

 

let me know what i can do for the wireless card and the keyboard....???

looking forward to trying this 10.5.4 distro....

 

EDIT: my specs

WXGA 1200x800

AMD turion 64 1.8Ghz

sigmatel 9200

ATI radeon 200M

wireless dell 1490

160GB SATA

TIA

[Cris900]

I am so excited to try a new distro on my Dell D630. I've had much success with Leo4Allv1-3 and iDeneb seems like a perfect progression. Thanks Punk92, et al for all your hard work. I just wish I could get beyond the install disk hanging at: IOAPIC: Version 0x20 Vectors 0:23. I've tried different boot options to include -x cpus=1 maxmem=2048 noapic and others, but still have had no success. Can anyone steer me in the right direction?

 

My D630 has these specs:

4GB memory

Intel T7500

120GB SATA, not set to AHCI

Intel Crestline Graphics GM965 Express

wxga 1280x800

Sigmatel 9205

Dell Wireless

Bluetooth

You have tried to select the ICHx Fix?

[pHrail]

Still cant get my Audio working or Video with correct ram specified.

 

Motherboard Asus P5b

 

ADI1988 chip for sound

Geforce 8600 GT 1gb

 

I kextloaded the AppleHDA.kext but no luck..any help? suggestions?

[Cris900]

I have Inspiron 1501...tried this distro....installation went perfect.. ....but looks like it did not detect my wireless card BCM4312(dell 1490) and also while booting it says keyboard not found....so i cannot enter the name and other detail screen

am i missing something here...leo4allV3 works perfect except the QE/CI(since my card 200m doesn't have drivers )....

 

let me know what i can do for the wireless card and the keyboard....???

looking forward to trying this 10.5.4 distro....

 

EDIT: my specs

WXGA 1200x800

AMD turion 64 1.8Ghz

sigmatel 9200

ATI radeon 200M

wireless dell 1490

160GB SATA

TIA

Can I know what you selected?

[joeventura]

Trying to get this working on aThinkpad X40

 

Takes 20 mins to go from the lanaguage selection screen to the utilities,

each screen change takes FOREVER

 

Having same problem with Kalyway disk.

 

Audio:

Chipset is AD1981B

 

Processor:Ultra Low Voltage Intel mobile Pentium M processor 1.0GHz and 713

Low Voltage Intel mobile Pentium M processor 1.2GHz and 738

1024 KB onboard L2 cache memory

 

 

Video chipsets:

Intel Extreme Graphics 2

32MB or 64MB of system memory

16MB ATI Mobility RADEON

 

Network:

Intel PRO/100 LAN Adapter

[Cris900]

Still cant get my Audio working or Video with correct ram specified.

 

Motherboard Asus P5b

 

ADI1988 chip for sound

Geforce 8600 GT 1gb

 

I kextloaded the AppleHDA.kext but no luck..any help? suggestions?

For the 8600 1gb selects the nvinject 1gb and not nvinjectGO ....

For audio I do not know .....

[pHrail]

where do i select this at, or how do i load it?

[sepulchre]

I've run into a few sleep/shut down/restart issues whereby the monitor/keyboard/mouse all turn off but the system fans still spin down. Any thoughts?

[gurukool]

Can I know what you selected?

Hi,

I selected the follo..

- AMD patch

-VIA-SB

- 9.4.0 MODBIN (AMD SSE3)

- Apple BC440X

- Wireless- Broadcom

- Applications.

 

I generally use Taruga's patch for my 9200 and Callisto v3 for resolution change.

i am not able to test the wireless since the install won't let me go beyond the keyboard not found issue after reboot...but i am assuming the card was not detected since i see the wireless icon when installing leo4allv3 which i didn't see this time. But it can tested later...i now need to go beyond the keyboard issue...

 

any help is appreciated....

TIA,

[Cris900]

where do i select this at, or how do i load it?

 

Three possibilities:

- select during installation

- take the driver with pacifist from CD release

-- I load this on the Internet

[sepulchre]

The applications said in the release like Firefox and Adium are not even in the release either. Did you seed the wrong release file or what man?

 

I installed Firefox and temp monitor from this DVD, it placed them into Applications/ideneb rather than straight into Applications as one might expect. Firefox was also in Italian which was a bit of a bind given I don't speak Italian lol so I un-installed it and installed it fresh from firefox's home page.

[mlerner]

doesn't work for me, doesn't properly detect SATA and I can't find a way to inject a kext. any suggestions?

[i*C]

Installs ok, Everthing goes smoothly until I get to the main apple configuration screen (after the welcome screen), it asks if I have data to transfer over from another mac etc, select no, and then it just loops back to welcome screen again! annoyed because it looked very smooth until then.....have tried a number of different kernels/options without luck.

 

 

Abit IP35pro

Quad core 6600

6GB

Nvidia 8800GTX 768MB

2 x 500GB SATA HD in AHCI Mode

1 x Samsung SATA DVD Writer in AHCI Mode

 

this is really easy to fix... try to set up user account in -v -s mode and set up a password it was described in post 26 i believe... leo4all gave me the same problem on my laptop...

[Cris900]

doesn't work for me, doesn't properly detect SATA and I can't find a way to inject a kext. any suggestions?

Post your hardware.....

[-TROWSK-]

Gosh i need help on my iphone atm bear with me this installation looked like it had everything i thought it would be as easy as kalyways was but seriously when i boot now it doesnt even prompt me to pick wich hard drive i want to boot from unless i press f8 and get lucky to get to the screen before it flies by install went fine but it gets too still waiting on root device and hangs then again still waiting on root device what did i do wrong ? do you have to use a chipset ? i didnt think you did if you could tell me what i need to checkmark to get this thing running please let me know i let my brother use my kalyway dvd and have no running computer....

 

specs are

 

Processor AMD Turion 64 X2 mk-36 2.0GHz

Hard Drive 80GB 5400 rpm

Network Acer InviLink Wi-Fi IEEE 802.11b/g

Fast Ethernet IEEE 802.3u

Ports 3 x 4-pin Type A USB 2.0 - USB

1 x VGA

1 x RJ-11 Modem

1 x RJ-45 Network

1 x Mini-phone Microphone

1 x Mini-phone Audio In

1 x Mini-phone S/PDIF/Audio Out

1 x mini-DIN S-Video Out

1 x DC Power Input

Manufacturer Acer, Inc

Display Screen 14.1" WXGA Widescreen Active Matrix TFT Color LCD with CrystalBrite

Keyboard Standard Size

Standard Memory 1GB

Manufacturer Part Number LX.AV40X.024

Batteries 1 x 6-cell Lithium Ion (Li-Ion) Standard Battery

Optical Drive DVD-Writer (Double-layer) - DVD-RAM/R/RW (Integrated)

Maximum Memory 4GB

Dimensions 13.4" Width x 9.9" Depth

Graphics Controller Integrated

Memory Technology DDR2 SDRAM

Chipset ATi Radeon Xpress 1100

Product Line Aspire

Product Name Aspire 5050-5954 Notebook

Product Type Notebook

 

please tell me what i need to have checkmarked (i miss my hack0tosh)

 

Trowsk (trowsk@gmail.com)