jake123 Posted August 4, 2008 Share Posted August 4, 2008 I just installed a fresh copy of iATKOS v4i (10.5.4), after it installed I downloaded and properly installed NVinject Go 2.0c, it gave me my native resolution automatically, yet it didn't give me quartz extreme. Does anyone know what I should do? On my last install (i messed it up trying to fix this problem) I installed the 10.5.2 kexts which didn't fix it... Thanks p.s. I have a dell xps m1330 with the 8400mGS. It has the latest BIOS update A12, which corrected something with nvidia cards. Graphics by NVIDIA: Chipset Model: Graphics by NVIDIA Type: Display Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 128 MB Vendor: NVIDIA (0x10de) Device ID: 0x0427 Revision ID: 0x00a1 ROM Revision: NVinjectGo 0.2.0c Displays: Display: Resolution: 1280 x 800 Depth: 32-bit Color Built-In: Yes Core Image: Software Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Not Supported Display Connector: Status: No display connected Link to comment Share on other sites More sharing options...
jasx Posted August 4, 2008 Share Posted August 4, 2008 Got the same problem bro... no matter what i try i can't get the core image to be hardware accelerated.. always Software.. but nobody wants to reply n help a rookie out... Link to comment Share on other sites More sharing options...
kytzu Posted August 4, 2008 Share Posted August 4, 2008 in Nvinject is 10.5.2 version, will not work for 10.5.3 or 10.5.4. Use this tutorial to change it or download a 10.5.3 injector. http://forum.insanelymac.com/index.php?sho...=107899&hl= Link to comment Share on other sites More sharing options...
jake123 Posted August 4, 2008 Author Share Posted August 4, 2008 in Nvinject is 10.5.2 version, will not work for 10.5.3 or 10.5.4. Use this tutorial to change it or download a 10.5.3 injector. http://forum.insanelymac.com/index.php?sho...=107899&hl= Oh! I remember last time I used OS X on this computer, I used something else... I think it was like NVweed or something... Does anyone know other ones there are? Link to comment Share on other sites More sharing options...
phantomc Posted August 4, 2008 Share Posted August 4, 2008 I don't think there's any nvidia driver working for 10.5.4 (iatkos) at the moment. I tried NVInject, NVinstaller, NVKush and the link above. None of them give me QE/CI. But the resolution is working. Better switch back 10.5.2 or 10.5.3 if you want QE until there's a driver for 10.5.4 Link to comment Share on other sites More sharing options...
dr bhaskar Posted September 15, 2008 Share Posted September 15, 2008 Same problem with me has anyone found the fix? I had quartz extreme working very well on kalyway 10.5.2. I later decided to try iatkos 10.5.4 full installation on another partition and i can't get quartz extreme to start working... Chipset Model: NVIDIA GeForce FX 5200 Type: Display Bus: PCI VRAM (Total): 256 MB Vendor: NVIDIA (0x10de) Device ID: 0x0322 Revision ID: 0x00a1 ROM Revision: NVinjectGo 0.2.0 Displays: Display: Resolution: 1024 x 768 Depth: 32-bit Color Core Image: Software Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Not Supported I just installed a fresh copy of iATKOS v4i (10.5.4), after it installed I downloaded and properly installed NVinject Go 2.0c, it gave me my native resolution automatically, yet it didn't give me quartz extreme. Does anyone know what I should do? On my last install (i messed it up trying to fix this problem) I installed the 10.5.2 kexts which didn't fix it... Thanks p.s. I have a dell xps m1330 with the 8400mGS. It has the latest BIOS update A12, which corrected something with nvidia cards. Graphics by NVIDIA: Chipset Model: Graphics by NVIDIA Type: Display Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 128 MB Vendor: NVIDIA (0x10de) Device ID: 0x0427 Revision ID: 0x00a1 ROM Revision: NVinjectGo 0.2.0c Displays: Display: Resolution: 1280 x 800 Depth: 32-bit Color Built-In: Yes Core Image: Software Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Not Supported Display Connector: Status: No display connected Link to comment Share on other sites More sharing options...
chrisdarl Posted September 15, 2008 Share Posted September 15, 2008 http://forum.insanelymac.com/index.php?act...&pid=851961 Take a look at the guide in the above link, I've the same graphics card, NVKush worked for me, however, it doesn't seem to work in a Retail DVD install of OSX (so far anyway) Link to comment Share on other sites More sharing options...
Pisek Posted November 3, 2008 Share Posted November 3, 2008 almost the same happened to me!!! havent found a fix... anyone? Link to comment Share on other sites More sharing options...
nobb1x Posted November 4, 2008 Share Posted November 4, 2008 hi there, i have fully QE/CI 8400M gs working on 10.5.5, i'm usign the latest mac book pro drivers (available on this forum) and NVKush, be sure to remove any nvinject and EFI string too. The only issue i have is a long pause just before the login screen appear,system seem frozen on the apple logo for 6/10 seconds then start and work. Before using NVKush i never got my card working with os version > than 10.5.2+graphics update Link to comment Share on other sites More sharing options...
macan Posted November 16, 2008 Share Posted November 16, 2008 for laptop : must be nvinject.go :thumbsup_anim: for Destop (PC) must be : nvinject only not nvinject.go or nvinject 0.2.0 / 0.2.1 / nvdarwin if destop pc have nvinejec.go is wrong! Link to comment Share on other sites More sharing options...
Recommended Posts