Jump to content

ASUS P5E WS Pro + Highpoint Rocketraid 2224 PCI-X on 10.5.4 ?


u-man
 Share

2 posts in this topic

Recommended Posts

Hello Insanepeople,

 

I have recently build my own Hackintosh. I use a ASUS P5E WS Pro Board with a Highpoint Rocketraid 2224 PCI-X Controller. I installed the OS X drivers from Highpoint (http://www.hptmac.com/US/product.php?_index=22&viewtype=download) for my Raidcontroller, but unfortunately it didnt work. Because Leopard doesnt recognize my PCI-X Slots of my Mainboard. So I am stuck here. I have attached a snapshot of what DPCIManager is saying. So if anybody can help me a little , that would be very nice. If I try to reach my Raidcontroller via a webgui, then safari is giving me the message "Safari can’t open the page “https://localhost:7402/” because it can’t find the server “localhost”.". So I guess the driver isnt loaded at all. I attached the driver too. I know that this Raidcontroller works under OS X, because it was in my "real" G5 before. I know that there are no official Intel-Macs with PCI-X Slots, so maybe I must patch some kext wich normally goes to a PPC Architecture.

 

So I will wait hopefully for any response. Plz help me, this would be so great, because I use FinalCut a lot and I want to be able to cut uncompressed HDTV, wich require a Datarate of 280mb/sec. Wich I cant achieve with the built in Sataports of the Mainboard.

 

Greetz U-MAN

 

PS: Beside of this, everything works fine under 10.5.4 (except 5.1 Sound)

post-230246-1217195124_thumb.jpg

hptmv6.kext.zip

Link to comment
Share on other sites

  • 3 years later...

Hello Insanepeople,

 

I have recently build my own Hackintosh. I use a ASUS P5E WS Pro Board with a Highpoint Rocketraid 2224 PCI-X Controller. I installed the OS X drivers from Highpoint (http://www.hptmac.co...ewtype=download) for my Raidcontroller, but unfortunately it didnt work. Because Leopard doesnt recognize my PCI-X Slots of my Mainboard. So I am stuck here. I have attached a snapshot of what DPCIManager is saying. So if anybody can help me a little , that would be very nice. If I try to reach my Raidcontroller via a webgui, then safari is giving me the message "Safari can�t open the page �https://localhost:7402/� because it can�t find the server �localhost�.". So I guess the driver isnt loaded at all. I attached the driver too. I know that this Raidcontroller works under OS X, because it was in my "real" G5 before. I know that there are no official Intel-Macs with PCI-X Slots, so maybe I must patch some kext wich normally goes to a PPC Architecture.

 

So I will wait hopefully for any response. Plz help me, this would be so great, because I use FinalCut a lot and I want to be able to cut uncompressed HDTV, wich require a Datarate of 280mb/sec. Wich I cant achieve with the built in Sataports of the Mainboard.

 

Greetz U-MAN

 

PS: Beside of this, everything works fine under 10.5.4 (except 5.1 Sound)

hi same thing hire. i have rocket raid 2224 pci-x slot i install kext 10.8 not working any idea any latest news

Link to comment
Share on other sites

 Share

×
×
  • Create New...