naskaf Posted July 11, 2008 Share Posted July 11, 2008 If anyone can help me please answer I have an ati firegl V3400. With this driver (10.4.8.ATI.Radeonx1x00.pcie.support.pkg) that i had found on JAs 10.4.8 SSE2 SSE3 all was fine Now On JAS 10.5.2 i cant work with many programs i have no resolution. For months i'm searching what to do... I have read some posts from other users but im not an expert to change the numpers they are saying with hexedit Can anyone help me with my card? Is there a driver for me Type: Display Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 128 MB Vendor: ATI (0x1002) Device ID: 0x71d2 Revision ID: 0x0000 Kernel Extension Info: No Kext Loaded Displays: Display: Resolution: 1024 x 768 Depth: 32-bit Color Core Image: Software Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Not Supported Thank you for all Link to comment Share on other sites More sharing options...
Krazubu Posted July 11, 2008 Share Posted July 11, 2008 This card has a R520 GPU, which means = ATI X1800 So, treat it like a X1800 and it should work. This means inserting dev ID in ATIRadeonX1000.kext + using the right injecter. You'll find more infos and tutos in the genius bar. If after all this you manage to get resolution change but no QE, and you're sure you've set it up properly, you may consider flashing the device ID to the one of a real X1800. (Some tools like Rabbit allow to do this) Link to comment Share on other sites More sharing options...
naskaf Posted July 11, 2008 Author Share Posted July 11, 2008 first of all thank you for answering to me it means a lot Second sorry about this but i dont know how to do this what you are telling to me....(sorry about my english) Can you healp me more Sorry about talking your time and thanks for all Link to comment Share on other sites More sharing options...
Krazubu Posted July 11, 2008 Share Posted July 11, 2008 Really all is there in the forum, it's the same way since 3 years so there are loads of infos and howtos, just take a bit of time for searching. Tip : the search engine is broken so use google instead adding "insanelymac" before what you search eg : insanelymac x1800. For the BIOS edit come back after you did the basics and we'll see this more precisely. Link to comment Share on other sites More sharing options...
Recommended Posts