Jump to content

x1300 / 0x7183 CI enabled, but not QE?


KaptenKresh
 Share

21 posts in this topic

Recommended Posts

Hi!

 

I have a Gigabyte radeon x1550 256mb card, using chipset 0x7183 (Same as most x1300 models) and i'm using the Natit_ATIauto kext.

I can change the resolution but i can't play DVDs/Games etc. (QE/CI not enabled.)

 

But when i updated my system from 10.5.2 to 10.5.4 the system info says this:

 

ATI Radeon X1300 Series:

 

Chipset Model: ATI Radeon X1300 Series

Type: Display

Bus: PCIe

PCIe Lane Width: x16

VRAM (Total): 256 MB

Vendor: ATI (0x1002)

Device ID: 0x7183

Revision ID: 0x0000

Displays:

L226W:

Resolution: 1680 x 1050 @ 60 Hz

Depth: 32-bit Color

Core Image: Software

Main Display: Yes

Mirror: Off

Online: Yes

Quartz Extreme: Not Supported

Display Connector:

Status: No display connected

 

 

Does "Core image: Software" means that CI is working?

Also, i'd like to know if theres a way for me to get QE working too...

 

System speccs:

Leo4allv3 10.5.4

Gigabyte GA-S55 motherboard

AMD athlon x2 2.1ghz 4000+

2gb RAM

Gigabyte radeon X1550 256mb ram

250gb sata

 

 

Thanks in advance!

 

Kresh

Link to comment
Share on other sites

I'm afraid I have bad news!!

 

That specific chipset cannot be set to support QE/CI! The issue is around a seperate device ID being used for the secondary output.

If you edit the ATIRadeonX1000.kext and add the DeviceID to it, it is sure to give you a Kernel Panic! You can try but I had this specific card in my Dell and replaced it with a ASUS EN7300GS(256MB).

 

The alternative DeviceID for the secondary Output is 0x71A3, but you cannot get the system past the bootloader if you add anyone of the two to the ATIRadeonX1000.kext.

 

With all the kexts loaded and without the Ids added to the ATIRadeonX1000.kext you are able to set the resolutiong but still nothing works :angel:

 

 

SticMAN

Link to comment
Share on other sites

Hi!

 

I have a Gigabyte radeon x1550 256mb card, using chipset 0x7183 (Same as most x1300 models) and i'm using the Natit_ATIauto kext.

I can change the resolution but i can't play DVDs/Games etc. (QE/CI not enabled.)

 

But when i updated my system from 10.5.2 to 10.5.4 the system info says this:

 

 

Does "Core image: Software" means that CI is working?

Also, i'd like to know if theres a way for me to get QE working too...

 

Thanks in advance!

 

Kresh

You download the it driver for 10.5.4 (Ati_for_QE_CI.zip)

Unpack and click on load.command and in terminal write real password and run auto reboot.

Link to comment
Share on other sites

Ok Bronya, i did as you told me... Opened the load.command in the terminal, wrote my password and the system rebooted...

Can't see any difference tho ;)

 

Did i do something wrong?

 

Thanks in advance!

Kresh

 

It is driver for QE/CI ! Try checkup in system profiler :(

Link to comment
Share on other sites

  • 4 weeks later...
  • 3 weeks later...

Sorry since this thread is old and all but I have the same device ID but when I installed that it rebooted and then I came to the login screen... but when I logged in i saw my wallpaper then my screen went black :-\... right now my kext is disabled so i can trouble shoot... any ideas?

Link to comment
Share on other sites

  • 4 weeks later...

Same problem, only sometimes i get Light blue / dark blue alternating lines, Safe mode works, im reverting to old ATIRadeonX1000 from install disc, i think Pacifist can get it, then i will give this more goes with other things, i just want QE / CI! ;)

Link to comment
Share on other sites

Same problem for me. The kext file was installed and I rebooted the my computer. After the login screen my screen went black and I got sometime Light blue,dark blue,alternating lines like abeeson says. Any idea to fix it? I am new about the driver installition amd uninstallition so I can't disable the kext file and I can't use my leopard now. If anybody can say how can I disable the kext file I will be very happy and I can use my leopard witout QE/CI until the the problem solve. İf I can get QE/CI i can finally use the Leopard fully operational. By the way now I am using AGP ATI RadeonX1300 but the vendor ID and Device Id are same.

Link to comment
Share on other sites

  • 2 weeks later...

I installed the Kext NatitX1300.r1v1.Installer for my video card Radeon

X1550 512MB GDDR2 128-bit, but still without QE.

 

My old monitor could be impossible this feature (QE/CI)?

 

Radeon X1300 PRO Series:

Modelo do Grupo de Circuitos Integrados: Radeon X1300 PRO Series

Tipo: Monitor

Barramento: PCIe

Largura Lane PCIe: x16

VRAM (Total): 512 MB

Fornecedor: ATI (0x1002)

ID do Dispositivo: 0x7143

ID da Revisão: 0x0000

Monitores:

 

StudioWorks 560A:

Resolução: 1024 x 768 @ 60 Hz

Profundidade: Cor de 32 bits

Core Image: Software

Monitor Principal: Sim

Espelho: Desligado

On-line: Sim

Quartz Extreme: Não Compatível

Conector do Monitor:

Estado: Nenhum monitor conectado

 

- It would be a matter of old monitor, or really my video card is not yet supported?

Link to comment
Share on other sites

  • 2 months later...

UPDATE / EDIT (for posterity): WORKS

 

post-340139-1230252234_thumb.png

 

 

USED DiaboliK's NatitX1300.kext installer!

(Revison #1 - 10.4.9 Version)

 

 

I NEED HELP MAKING MY X1300 CARDS WORK, HAVE TRIED EVERYTHING IF ANYONE CAN GIVE ME A STEP BY STEP GUIDE PLEASE I'D APPRECIATE IT!

 

TY

post-340139-1229899856_thumb.png

 

post-340139-1229899868_thumb.png

Link to comment
Share on other sites

UPDATE / EDIT (for posterity): WORKS

 

post-340139-1230252234_thumb.png

 

 

USED DiaboliK's NatitX1300.kext installer!

(Revison #1 - 10.4.9 Version)

 

 

I NEED HELP MAKING MY X1300 CARDS WORK, HAVE TRIED EVERYTHING IF ANYONE CAN GIVE ME A STEP BY STEP GUIDE PLEASE I'D APPRECIATE IT!

 

TY

post-340139-1229899856_thumb.png

 

post-340139-1229899868_thumb.png

i have your same id (0x7146) and i install the Diabolik's natitx1300.kext installer too...but the ci/qe isn't supported :( can you help me? what have you done?

Link to comment
Share on other sites

  • 4 weeks later...

I have a lot of this solutions tried but i can't get QE/CI (iWork don't work with my PC !)

I use pcefiV9 by netkas and i can't put the ati x1000 ga plugin in /Extra.

OK, I put this plugin with the extension in /System/Library/Extensions it makes any Kernel Panic but...

when the session begin it make a graphic bug with a Kernel Panic !!! Youhou ! ( Note : The busy cursor is present and movable before the KP ! )

 

(Sorry for my bad english but i'm french)

Link to comment
Share on other sites

  • 7 months later...
I'm afraid I have bad news!!

 

That specific chipset cannot be set to support QE/CI! The issue is around a seperate device ID being used for the secondary output.

If you edit the ATIRadeonX1000.kext and add the DeviceID to it, it is sure to give you a Kernel Panic! You can try but I had this specific card in my Dell and replaced it with a ASUS EN7300GS(256MB).

 

The alternative DeviceID for the secondary Output is 0x71A3, but you cannot get the system past the bootloader if you add anyone of the two to the ATIRadeonX1000.kext.

 

With all the kexts loaded and without the Ids added to the ATIRadeonX1000.kext you are able to set the resolutiong but still nothing works :D

 

 

SticMAN

Link to comment
Share on other sites

 Share

×
×
  • Create New...