Nick_from_Belarus Posted June 4, 2008 Share Posted June 4, 2008 Hi everybody! First of all sorry for my bad english , i from Belarus. I just install MacOS X 10.4.8 on my PC. During start procces, i can see gray screen with Apple logo, after that i see black screen. In that time playing music. After music Speech halper told me how to use him. That's all. After him loading didn't proceed. How i can fix my problem???????? Link to comment Share on other sites More sharing options...
Apple Freak Posted June 4, 2008 Share Posted June 4, 2008 So, do you just have a black screen? What kind of port are you using? DVI (the white one) or VGA (the blue one)? If you use DVI port it might not work, so switch it to VGA And if the above doesn't work: At the Darwin bootloader screen, press F8 and put "-v" at the prompt(without the quotes) and press Enter See what comes up, I think it's because you didn't have the right video driver, but it should still boot fine. If that doesn't work, then try to put "-x" at the Darwin prompt It should come up By the way, Welcome to the world of Hackintosh!! Link to comment Share on other sites More sharing options...
Nick_from_Belarus Posted June 4, 2008 Author Share Posted June 4, 2008 I use VGA port. Link to comment Share on other sites More sharing options...
Apple Freak Posted June 4, 2008 Share Posted June 4, 2008 Again, Do you just got a black screen? Link to comment Share on other sites More sharing options...
Nick_from_Belarus Posted June 4, 2008 Author Share Posted June 4, 2008 Yes, i still have black screen. After typing -x i've had seen that: Loading Darwin/X86 Errors encountered while starting up the computer Pausing 5 second. After that i type -v, and Mac started normaly. But after rebooting that problem come again. Link to comment Share on other sites More sharing options...
Apple Freak Posted June 4, 2008 Share Posted June 4, 2008 Huh, interesting, try to boot with -v every time and see if it starts up fine everytime But supposedly, it wouldn't matter whether you boot with -v or not. -v just shows you the process that your Mac boots. Sometimes it can solve problems while booting-- since you can see the process. Try to take a few pics at the screen, so I can see what the problem is. Also, put the specs. of your computer so I can determine the problem Link to comment Share on other sites More sharing options...
Nick_from_Belarus Posted June 25, 2008 Author Share Posted June 25, 2008 I just reinstall my Mac and everything is cool!!!! Thanks for help. Link to comment Share on other sites More sharing options...
pochia8 Posted September 5, 2009 Share Posted September 5, 2009 Hi I think I'm running in the same problem of Nick_from_Belarus I've installed the Jas os 10.4.8 on my pc and, after the installation process was successfully completed and the machine restarted, I have the grey screen with the apple logo and then black screen! I'm sure that the presentation is going on because if I connect my hearphones to the pc I can hear the music and then the VoiceOver starting. Should I do the same thing of typing "-x" or "-v"? Or simply try to install a the patched 10.5 os and see if that works? (I have that one too) I have a Geforce FX5200 video card, which is quite old, but I think that for only booting it should be sufficent, right?! thanks for the help Link to comment Share on other sites More sharing options...
Recommended Posts