Jump to content

[solved] cant setup nvidia 8600GT


luismanson
 Share

8 posts in this topic

Recommended Posts

Hi all, i installed leo4all v3 10.5.2 and i just cant make the nvidia drivers load

i have tryed with the ones on the CD, but all i got was a crash

with latest nvinject, i can see the data on about this mac, 512 ram, graphics by nvidia, but i still dont get the resolution, (1680x1050)

then i tryed with nvinstaller 0.41, after installing OSX crashes hangs after 20 seconds, i need to do a hard reset

i also tryed nvinstaler + nvinject... got crash

 

then edited all Info.plist from nvinstaller after rebooting on single user mode. but also got a crash (i removed all &0x.... )

 

my card is XFX BTW 0x0401:10de (according to lspci)

 

any ideas? foroosxcrashlj5.jpg

Link to comment
Share on other sites

Thanks for replying!!!

 

its an ASROCK AM2NF6G-VSTA

 

hardware is:

Vger luis # lspci -n

00:00.0 0500: 10de:03ea (rev a1)

00:01.0 0601: 10de:03e0 (rev a2)

00:01.1 0c05: 10de:03eb (rev a2)

00:01.2 0500: 10de:03f5 (rev a2)

00:02.0 0c03: 10de:03f1 (rev a2)

00:02.1 0c03: 10de:03f2 (rev a2)

00:04.0 0604: 10de:03f3 (rev a1)

00:05.0 0403: 10de:03f0 (rev a2)

00:06.0 0101: 10de:03ec (rev a2)

00:07.0 0680: 10de:03ef (rev a2)

00:08.0 0101: 10de:03f6 (rev a2)

00:09.0 0604: 10de:03e8 (rev a2)

00:0b.0 0604: 10de:03e9 (rev a2)

00:0c.0 0604: 10de:03e9 (rev a2)

00:18.0 0600: 1022:1100

00:18.1 0600: 1022:1101

00:18.2 0600: 1022:1102

00:18.3 0600: 1022:1103

01:08.0 0480: 1131:7130 (rev 01)

02:00.0 0300: 10de:0401 (rev a1)

 

AKA

 

lspci

00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1)

00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2)

00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2)

00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2)

00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a2)

00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a2)

00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1)

00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2)

00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2)

00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2)

00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2)

00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)

00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)

00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)

00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration

00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map

00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller

00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control

01:08.0 Multimedia controller: Philips Semiconductors SAA7130 Video Broadcast Decoder (rev 01)

02:00.0 VGA compatible controller: nVidia Corporation Device 0401 (rev a1)

 

 

 

can anyone giveme a link to a related post? im a bit lost here, i made it work partialy with punk drivers beta 3, but i only got blue screen and had to reinstall

Link to comment
Share on other sites

Finally i made it work, editing al NVDAN* and adding 040110de to the lists, then after reboot monitor went out of resolution, so moved away all related kexts and installed nvinject...

after reboot i got an ugli resolution but i was able to changeit....

 

i still dont have "quartz extreme" but idont know what it is or how to enableit.... can anyone explain to me pleas?

Link to comment
Share on other sites

try using nvkush instead of nvinject, and also make sure you have the leopard graphics update installed (in software update).

 

it did not work removing or without removing nvinject, however i did a big mess and finally i have 3d! tnx!!

i reinstalled apple kext (i dint have GeForce.kext since firs boot..., switched to nvinject 2.1 and installed titan, after titan the computer crashed, rebooted in safe mode, added the IDs and...here im, with almost 100FPS according to xbench!

 

thanks all :wacko:

Link to comment
Share on other sites

 Share

×
×
  • Create New...