pukima Posted May 31, 2008 Share Posted May 31, 2008 Anyone can help me to pass through my problem? i can't get the sound working in asus p5gc mx / 1333. I tried to install ALC883 package from the forum but it doesn't work.. tried patcher version 1.2.. but it says 2 or 3 message box pop up, saying the package is not good... I dunno what else to do... am I doing something wrong?... Thx... I'm Using: Asus P5GC MX / 1333 E2160 Dual Core 1.8GHz DDR2 1GB Kingston X1650XT 256MB DDR3 Harddisk 160GB Seagate 500W PSU Leopard 10.5.2 Link to comment Share on other sites More sharing options...
SuperNet33 Posted May 31, 2008 Share Posted May 31, 2008 http://wiki.taruga.net/tiki-index.php Link to comment Share on other sites More sharing options...
pukima Posted May 31, 2008 Author Share Posted May 31, 2008 Thx for the reply superNet33... Now I figured out that, in http://wiki.taruga.net/tiki-index.php asus p5gc mx / 1333.. using ALC883... but, when i checked in windows xp it is ALC662... so all this time is not working... REFERENCE: RammJet 1st Post ( http://forum.insanelymac.com/index.php?showtopic=18642 ) Here is what I DID to get this working.. I think all other should be the same.. 1. Download AzaliaAudio.pkg should give 2ch output on most High Def Audio chipsets (updated v1.1) ( http://forum.insanelymac.com/index.php?act...ost&id=6740 ) AzaliaAudio.pkg.zip ( 71.58K ) Number of downloads: 33648 ( http://forum.insanelymac.com/index.php?showtopic=36520 ) <---- to download AzaliaAudio.pkg 2. Install the package and restart. 3. In (/System/Library/Extensions) and edit "AppleAzaliaAudio.kext/Contents/Info.plist" Find This Key: <key>IOHDAudioCodecVendorID</key> <string>0x10ec0880</string> change <string>0x10ec0880</string> to <string>0x10ec0662</string> <--- In My case Vendor ID is 10ec and My device ID is 0662 4. You can find the device ID and vendor ID in RammJet 1st Post ( http://forum.insanelymac.com/index.php?showtopic=18642 ) under Appendix 5. Go to Application, Utilities, Audio Midi Setup. Select Properties for HD Audio Output. Use Format 44100.0 Hz and 2ch-24bit 6. Restart and ENJOY..!! May I help other people who could not get their sound working.. HOPE This POST WORKING for ALL OF U..!! Link to comment Share on other sites More sharing options...
dooododoo Posted July 19, 2008 Share Posted July 19, 2008 Here's a super easy alternative to get audio working on an Asus P5GC-MX 1333. If you're using Kalyway 10.5.2, select the first 3 audio options when installing. You'll get sound out of the box! I have ALC883 (3 ports) Vendor 10ec Device 0662. Don't ask me why it works--neither of the first 3 options insert the appropriate device and vendor id's--but it makes my sound work. Why it works is beyond me. If anyone can shed some light on this, that would be great. Link to comment Share on other sites More sharing options...
syao Posted July 23, 2008 Share Posted July 23, 2008 Yes it's work. But Sound Input seem not working well... not a big deal.. Link to comment Share on other sites More sharing options...
maximilian298453 Posted September 14, 2008 Share Posted September 14, 2008 I installed with kalyway 10.5.2 and while the audio out is fine, the mic and line inputs appear DOA. The mic is working when I boot into windows XP, so I know it's not the hardware. I went to taruga's site but found it rather confusing, leaving me afraid I'd screw something up if I fumbled around. Are there specific kexts that I should verify have been installed or something? Thanks a lot. Link to comment Share on other sites More sharing options...
pootn20 Posted October 9, 2008 Share Posted October 9, 2008 Here's my story. I installed Kalyway 10.5.2 first without a problem. Sound, video, everything worked. Then every time I use Transmission the computer would lock up and never move. I wanted to fix it instead of reinstalling. Long story short I reinstalled. It worked fine until I downloaded so much then locks up every time. I've done cpu=1 and everything else I could find on this VERY helpful website. So now I'm running Zephyroth 10.5.2 Rev. 1 and now I have no sound and one default resolution. I'm at a lost since I didn't have to troubleshoot anything after installing Kalyway. NVInject 512 worked like a charm and I didn't even touch audio and it worked. I'm not trying to wine, but I am new. I used the audio codec .pkg from this thread to no avail. I just need a nudge in the right direction if I could oblige someone to help. Here's my specs. Oh and I tried just clicking all the sound kexts at the install customization, but just ended up with 3 kext improperly installed errors. AMD 6000+ GIGABYTE GA-M57SLI-S4 AM2 NVIDIA nForce 570 SLI MCP ATX AMD Motherboard Seagate Barracuda 7200.10 ST3250410AS 250GB 7200 RPM SATA PNY VCG88512GXEB-FLB GeForce 8800 GT 512MB G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 Link to comment Share on other sites More sharing options...
AlpineRaven Posted October 13, 2008 Share Posted October 13, 2008 Here's my story. I installed Kalyway 10.5.2 first without a problem. Sound, video, everything worked. Then every time I use Transmission the computer would lock up and never move. I wanted to fix it instead of reinstalling. Long story short I reinstalled. It worked fine until I downloaded so much then locks up every time. I've done cpu=1 and everything else I could find on this VERY helpful website. So now I'm running Zephyroth 10.5.2 Rev. 1 and now I have no sound and one default resolution. I'm at a lost since I didn't have to troubleshoot anything after installing Kalyway. NVInject 512 worked like a charm and I didn't even touch audio and it worked. I'm not trying to wine, but I am new. I used the audio codec .pkg from this thread to no avail. I just need a nudge in the right direction if I could oblige someone to help. Here's my specs. Oh and I tried just clicking all the sound kexts at the install customization, but just ended up with 3 kext improperly installed errors. AMD 6000+ GIGABYTE GA-M57SLI-S4 AM2 NVIDIA nForce 570 SLI MCP ATX AMD Motherboard Seagate Barracuda 7200.10 ST3250410AS 250GB 7200 RPM SATA PNY VCG88512GXEB-FLB GeForce 8800 GT 512MB G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 Did you say that Transmission doesnt work as it locks up? Is it still doing that today with latest version? Is Sleep working well? Cheers AP Link to comment Share on other sites More sharing options...
duktape Posted December 28, 2008 Share Posted December 28, 2008 is there any way to get audio in on the P5GC MX? Link to comment Share on other sites More sharing options...
Wppley Posted December 30, 2008 Share Posted December 30, 2008 is there any way to get audio in on the P5GC MX? Thanks to Occijano and tmongkol. Try this 945GCM_S2L_5.1_AppleHDA.kext.zip Link to comment Share on other sites More sharing options...
sy4m Posted February 16, 2009 Share Posted February 16, 2009 Thanks to Occijano and tmongkol. Try this thanks finally i can use the line in, works fine for me, no bugs at all. Link to comment Share on other sites More sharing options...
Leo T Woods Posted May 15, 2010 Share Posted May 15, 2010 I have Headphone/SPDIF output working with the Kalyway ALC883 Kext when installing but no speakers so I install the AzaliaHDA.pkg and I have speakers but no headphones/SPDIF output and me LineIn doesn't work and as I write alot of music and record it! It would be helpfull if it did work! Leo! Fujitsu Amilo Pi 2515 Intel Core 2 Duo 1.5GHz 2GB SDRAM 667mHz DDR2 160GB WD S-ATA2 Intel 965Chipset (Graphics - X1300 Worked out the box) Intel Wireless Pro - Not working Intel HDA (ALC883 speakers only, no SPDIF/Headphones or line in!) Kalyway 10.5.2 Leopard Link to comment Share on other sites More sharing options...
Recommended Posts