HP 530 Notebook PC
Operating system
iATKOS Leopard 10.5.1-Kalyway 10.5.2 Combo Update-Leopard Graphics Update
Processors available
Intel® Core™ Duo Processor T2400 (1.83 GHz, 667 MHz FSB, 2 MB L2 cache) single core boot
Specialized Design
Intel Centrino Pro processor technology
Chipset
Mobile Intel® 945GME Express
Memory 1 GB 667 MHz DDR SDRAM

Intel Graphics Media Accelerator 950 resolution fixed at 1280x800
I edited the gma950 kext to get them working, can be found >>> HERE

Audio works out of the box

Intel 802.11a/b/g; Broadcom 802.11 b/g - not yet working

Desktop/Laptop? Desktop

Prebuilt? (Y/N) N


Install Methods summary: iATKOS Leopard 10.5.1 updated Kalyway HackCombo Update 10.5.2 (working fine)! Installed onto SATA HDD from an IDE DVD Rom.

Does EFI and/or the Vanilla kernel work? Partitioned as MBR, EFI not working


Motherboard
Manufacturer: MSI
Motherboard Model: 7091
Chipset: Intel 915G Express
BIOS Version: Unknown , Revision: Unknown
BIOS setup options: Nothing special.
Audio: Azalia 9880 partially working without any patch.
LAN: Not tested
SATA & IDE: Working properly
Onboard Graphics: not available

Processor
Processor Model: 630
Speed: 3.0GHz
Processor Name: Intel

Video Card
What type of card: PCI Express
Model: Nvidia 6600LE
Memory: 256MB DDR2
Board Manufacturer: MSI
Patches used: NVInject 0.2.1
QE/CI: Supported/Hardware Accelerated
All resolutions available? unkwon
Recognised as: Nvidia 6600LE, 256mb

Other PCI/PCIe Components:
PCI USB 2.0 Card: working
TV Tuner Card > Pinnacle PCTV Stereo - not installed

Other Components
Wireless/Wired Card: CDMA on USB but not installed
Standard (Wireless only): NA
Manufacturer: ZTE
Works? not

Version: Kalyway 10.5.2

Desktop

Install Methods summary: Kalyway 10.5.2, default parameters + NVInject 512

Does EFI and/or the Vanilla kernel work? yes, both

Motherboard
Manufacturer: Asus
Motherboard Model: Maximus Formula
Chipset: X38 / ICH9
BIOS Version: , Revision: 0907
BIOS setup options: Disabled JMicron, Enabled SATA AHCI
Audio: Works out of the box (at least stereo outpout)
LAN: Works out of the box
SATA & IDE: Works out of the box (IDE not tested as I couldn't install with an IDE DVD writer, I had to bought a SATA one)

Processor
Processor Model: Intel Core 2 Duo E8500 @ 3800MHz
Speed: 3166@3800MHz
Recognized as what in System Profiler: 3.83Ghz Unknow

Video Card
What type of card: PCI Express
NVIDIA
Model: 8800GT
Memory: 512MB
Board Manufacturer: Twintech
Patches used: NVInject 512 at install
QE/CI: working
All resolutions available? yes

Current OS X Version: 10.5.2

Desktop/Laptop? Desktop

Prebuilt? (Y/N) N


Install Methods summary: Kalyway 10.5.1 install dvd upgraded to 10.5.2 with kalyway combo update onto SATA HDD

Does EFI and/or the Vanilla kernel work? Partitioned as GUID, EFI


Motherboard
Manufacturer: Asus
Motherboard Model:P5L-MX
Chipset: Intel 945G
BIOS Version: 1004 , Revision: Unknown
BIOS setup options: SATA Active, S.M.A.R.T. Enabled
Audio: SoundMax ADI1986A, 2 channels only, no mic,line in,
LAN: Attansic L1 Ethernet works with this patch
SATA & IDE: Works out of the box

Processor
Processor Model: Intel Pentium D820
Speed: 2 x 2.8GHz
Recognized as what in System Profiler: About this mac = 2.8GHz Unknown, System Profiler = Unknown

Video Card
What type of card: Integrated
Intel
Model: GMA950
Memory: 64VRAM
Board Manufacturer: AsusTek
Patches used:none
QE/CI: Supported/Hardware Accelerated
All resolutions available? Yes

Other PCI/PCI-e Components (USB are listed in Other Accessories below)

Current OS X Version: 10.5.2
Install method: iATKOS v1.0ir3 (ir2 + update patch) + Kalyway 10.5.2 + Apple GFX 1.0 Update / EFI working / Dual boot Vista Ultimate (32bit)

Desktop

Prebuilt: home brew

Motherboard
Manufacturer: Asus
Model: P5N e-SLI
Chipset: nForce 630sli
Audio: Realtek ALC883, working, not visible in system profiler
LAN: Marvell 88E1116 PHY - not working (tried iNoob kext - freezes system when copying large files over the network)
LAN: Linksys USB200M (USB 10/100) - working with 3rd party driver
CPU
Model Number: Core 2 Duo E6600
Recognised as: 2.4GHz

Memory/DDR: 2Gb

Video
Manufacturer: ATI
Model: 1800GTO (Sysprofile shows it as a x1900, no Quartz Extreme support)
Bus Type: PCIe x16
Memory size: 512Mb
Dual screen working? Yes
QE/CI working? No
Resolution changeable? Yes

SATA/IDE working: Yes

Monitors: 2x Samsung 225BW (only one screen active in Mac mode)
HDD: SATA Hitachi 500Gb SATA II
DVDRW: Plextor PX716A SATA (had to install from PATA DVDRom player)
USB: Working
Firewire: Working

Current OS X Version: 10.5.2

Desktop

Prebuilt? No

Manufacturer: Shuttle PC
Model: XPC SG33G5

Install Methods summary: Kalyway 10.5.1 DVD, Kalyway 10.5.2 Update, Apple Leopard Graphics Update



Motherboard: Shuttle XPC
Manufacturer: Shuttle PC
Motherboard Model: SG33G5
Chipset: Intel G33
BIOS Version: , Revision:
BIOS setup options: SATA set to AHCI
Audio: Works With Patch AppleHDAPartcher and Click to view attachment
LAN: Works out of the box
SATA & IDE: Works out of the box
FIREWIRE: No

Processor Intel® Pentium® Dual-Core Processor
Processor Model: E2180
Speed: 2.0Ghz
Recognized as what in System Profiler: 2.0Ghz Intel Core 2 Duo

Video Card
Integrated
Intel
Model: GMA 3100
Memory: 384MB Shared Memory
Board Manufacturer: Intel
Patches used:none
QE/CI:no
Only 1024x768 available

Video Card
PCI Express
ATI
Model: HD2600 Pro
Memory: 512 MB
Board Manufacturer:Visiontek
Patches used: ATIRadeonX2000_Leopard.pkg
QE/CI: Yes
All resolutions available

95% Success install. No sleep, no mic-in, no wifi.

Current OS X Version: 10.5.2

Desktop/Laptop?
Laptop

Prebuilt? Yes
Manufacturer: Dell
Model: Vostro 1500

Install Methods summary: Used Kalyway 10.5.1 with only EFI and Vanilla then update to 10.5.2

Does EFI and/or the Vanilla kernel work? MBR, EFI + Vanilla Kernel works great for dual boot.

Motherboard
Manufacturer: Unknown
Motherboard Model: Unknown
Audio: Yes but not out of box, Use AppleHDApatcher and stac9205.txt linux dump
LAN: Yes but not after 10.5.2 update, need broadcom440x ethernet kext file
SATA & IDE: Yes

Processor
Processor Model: Intel Core 2 Duo
Speed: 2.4 Ghz
Recognized as what in System Profiler: 2.4ghz Unknown

Video Card
What type of card (PCI Express/AGP/Integrated): PCI
NVIDIA/ATI/Intel? nVidia
Model: GeForce 8600 MGT
Memory: 256MB DDR2
Board Manufacturer: Unknown
Patches used: nVidia Universal installer with self added device id.
QE/CI: Supported fully
All resolutions available? Yes, VGA output also works after changing NVCAP value.

Other PCI/PCI-e Components (USB are listed in Other Accessories below)
Wireless/Wired Card (for PCI/PCI-e cards only)
Interface: PCI/PCI-e? PCI
Standard (Wireless only): 802.11 a/b/g
Manufacturer: Intel
Model: 3945 ABG
Works? NO
Patches: waiting for iwidarwin3945

Other Accessories (USB/FIREWIRE)
Type: Built in webcam
Works? Yes
Patches/Work out of the box? Out of box

OS X Version: 10.5.2
Install method: Kalyway Leopard 10.5.2 DVD Intel Amd (sse2/sse3) EFI V8

Motherboard: GIGABYTE
Model: GA-945GCM-S2L
Chipset: 945GC

Audio: Realtek ALC662, working, show HD Audio Output

LAN: Realtek RTL 8111C chip (use RTGMac_v1.1.6)

CPU: Core 2 Duo E4500 @2.75GHz

Memory/DDR: 2Gb DDR2 800

Video
Manufacturer: Nvidia
Model: GeForce 8600GT (DVI Working, VGA port have problem)(NVInstallerV.41)
Bus Type: PCIe x16
Memory size: 256Mb

QE/CI working

Resolution changeable? Yes

SATA/IDE working: Yes

Monitors: Topcon 15'' LCD

HDD: ATA Maxtor 160Gb ATA/100 (speed good)

DVDRW: Pioneer DVR-10XL ATA

USB: Working

Laptop
Manufacturer: acer
Model: aspire 5610

Install Methods summary: leo4all v2

Does EFI and/or the Vanilla kernel work? partitioned as MBR, EFI v8 + Vanilla Kernel

Motherboard
Manufacturer:
Motherboard Model:
Chipset: intel 82945 I think?
BIOS Version: , Revision:
BIOS setup options: default
Audio: azaliaout from kalyway 10.5.1
LAN: Works out of the box
SATA & IDE: Works out of the box

Processor
Processor Model:Intel® Core™ Duo CPU T2450
Speed: 2ghz
Recognized as what in System Profiler:Intel® Core™ Duo CPU T2450

Video Card
What type of card (PCI Express/AGP/Integrated): integrated
Intel
Model:gma 950
Memory:64mb
Board Manufacturer:
Patches used:none
QE/CI: supported/hw accelerated
All resolutions available? yes


Wireless/Wired Card (for PCI/PCI-e cards only)
Interface: PCI-e
Standard (Wireless only): 802.11g
Manufacturer:intel
Model:3945abg
Works? n
Patches:

Other Accessories
Type Webcam, built in
Name:
Manufacturer:acer
Works? with everything but photobooth, oddly enough, it works during the setup assistant
Work out of the box

bluenext wireless g usb dongle
works with ralink drivers off of ralink taiwan website

had to remove ps2nub to get kb/trackpad working after first reboot...works fine in safe mode
haven't tried installing bluetooth yet...I think it's a broadcom

Current OS X Version: 10.5.2
Desktop/Laptop?Desktop

Prebuilt? N

Install Methods summary: Leo4All v2

Does EFI and/or the Vanilla kernel work? EFI_MBR

Motherboard
Manufacturer: Asus
Motherboard Model: A8V (just A8V)
Chipset: VIA K8T800Pro, VIA VT8237
BIOS Version: Unknown , Revision: Unkwown
BIOS setup options: Defaults
Audio: OOB
LAN: Used skge.kext
SATA & IDE: IDE works, SATA not tested.

Processor
Processor Model: AMD Athlon 64 3200+
Speed: 2,0 GHz
Recognized as what in System Profiler: As above

Video Card
What type of card (PCI Express/AGP/Integrated): AGP
NVIDIA/ATI/Intel? NVIDIA
Model: 6200 (6200A, NV44A)
Memory: 256MB
Board Manufacturer: Unknown
Patches used: Nvinject 0.2.1 (from the Leo4allv2 installer)
QE/CI: Yes, full.
All resolutions available? Yes (tried 1366x768 and 1680x1050)

Further info
No sleep, no Cool'n'Quiet.

Desktop/Laptop? Laptop

Prebuilt? N
Manufacturer: Lenovo (IBM)
Model: X61

Install Methods summary: Just put the Kalyway 10.5.2 Intel / AMD DVD and install !

Does EFI and/or the Vanilla kernel work? partitioned as MBR, EFI v8 + SleepKernel

(in following sections, if you don't know or not sure, write "unknown")
Motherboard
Manufacturer:
Motherboard Model:
Chipset: Mobile Intel GM965 Express Chipset / ICH8 Mobile
BIOS Version: 7NETB1WW (2.11) , Revision:
BIOS setup options: AHCI Enable, All CPU trottling and so on ... on Performance! and USB On always (enable everything at USB power)
Audio: Soundmax ? not working ...yet?
LAN: Intel
SATA & IDE: Works out of the box? If not, list patches.

Processor
Processor Model: Intel Core 2 Duo processors T7100
Speed: 1.8GHz
Recognized as what in System Profiler: 1.8GHz

Video Card (if you have integrated and PCI/AGP, use this template twice)
What type of card (PCI Express/AGP/Integrated):
NVIDIA/ATI/Intel?
Model:Intel GMA X3100 Integrated Graphics
Memory: 144MB
Board Manufacturer: INTEL
Patches used: working already
QE/CI: no?
All resolutions available? uhm maybe after restarts, but right now only 1024x768 (max)

Other PCI/PCI-e Components (USB are listed in Other Accessories below)
Wireless/Wired Card (for PCI/PCI-e cards only)
Interface: PCI/PCI-e?
Standard (Wireless only): (example: 801n)
Manufacturer:Intel PRO/Wireless 3945ABG Network Connection
Model:PRO/Wireless 3945ABG Network Connection
Works? (Y/N,) No
Patches: ...

Sound Card (this is for PCI/PCI-e cards only - integrated on motherboard is in motherboard section)
Interface: PCI/PCI-e?
Manufacturer: Soundmax
Model: don't know yet
Works? (Y/N,) No
Patches:...

Other Accessories (USB/FIREWIRE)
Type (Webcam, External Sound Card, USB bluetooth dongle, etc.):
Name: Netgear WG111v2
Manufacturer: Netgear
Works? (Y/N,) Y
Patches/Work out of the box? uhm, installing Realtek driver for 8xxx L ? don't remeber right now

Current OS X Version: 10.5.2 Kalyway

Desktop/Laptop? Desktop

Prebuilt? (Y/N) No


Install Methods summary: Kalyway 10.5.2 install via DVD on to SATA HDD

Does EFI and/or the Vanilla kernel work? Partitioned as GUID, vanilla Kernel from Kallyway DVD.


Motherboard
Manufacturer: Gigabyte
Motherboard Model:GA-P35C-DS3R
Chipset: P35
BIOS Version: F10 , Revision: A2
BIOS setup options: SATA Active, S.M.A.R.T. Enabled
Audio: Onboard, Works out of the box
LAN: Not tested
SATA & IDE: Works out of the box

Processor
Processor Model: Intel core 2 Quad 6600 Rev. G0
Speed: 4 x 2.4GHz
Recognized as what in System Profiler: Intel Core 2 @ 2.4GHZ

Memory: 2 GB DDR2 @ 800Mhz PC6400 (4X512)
Manufacturer: GEIL

Video Card
What type of card: PCI Express
NVIDIA
Model: GeForce 8800 GTS
Memory: 512 MB DDR3
Board Manufacturer: PNY
Patches used: NVinject
QE/CI: not tested
All resolutions available? No

Other PCI/PCI-e Components (USB are listed in Other Accessories below):
External USB HDD: Lacie External HDD 80GB 2,5
Wireless/Wired Card: Wireless USB CARD
Interface: USB
Standard (Wireless only): 801b/g
Manufacturer: Gigabyte
Model: GN-WBKG Rev. 1.0
Works? Works

Patches: None

Current OS X Version: 10.5.2

Desktop/Laptop? Desktop

Prebuilt? (Y/N) No
(If prebuilt then add following information, otherwise fill the Motherboard:)
Manufacturer: (example Dell?)
Model: (example Inspiron xxx?)

Install Methods summary: (List all methods tested, check preferred method - the one you are writing about now)
Default installation method

Does EFI and/or the Vanilla kernel work? (example: partitioned as MBR, EFI v8 + Vanilla Kernel)
Yes
(in following sections, if you don't know or not sure, write "unknown")
Motherboard
Manufacturer: Asus
Motherboard Model: P5B-VM DO
Chipset: ICH8
BIOS Version: , Revision: 1001
BIOS setup options: (example: SATA should be set as "native", "AHCI"; Processor - set EIST to "disabled") Sata as IDE, Jmicron disabled
Audio: Works out of the box? Works OOB
LAN: No LAN as it uses Intel's 82566. Bought a RL8139 for LAN
SATA & IDE: Had problems to install with IDE DVD drive. Purchased a SATA drive.

Processor
Processor Model: Intel Core 2 Duo E4300
Speed: 1.8 GHZ Overclocked to 2.3
Recognized as what in System Profiler: 2.3 GHz

Video Card (if you have integrated and PCI/AGP, use this template twice)
What type of card (PCI Express/AGP/Integrated): PCIe
NVIDIA/ATI/Intel? Nvidia
Model: 8600GT
Memory: 512MB
Board Manufacturer: Asus
Patches used: Nvinject
QE/CI:
All resolutions available? Yes

Other PCI/PCI-e Components (USB are listed in Other Accessories below)
Wireless/Wired Card (for PCI/PCI-e cards only)
Interface: PCI/PCI-e?
Standard (Wireless only): (example: 801n)
Manufacturer:
Model:
Works? (Y/N, if "Y", list patches)
Patches:

Sound Card (this is for PCI/PCI-e cards only - integrated on motherboard is in motherboard section)
Interface: PCI/PCI-e?
Manufacturer:
Model:
Works? (Y/N, if "Y", list patches)
Patches:

Other Accessories (USB/FIREWIRE)
Type (Webcam, External Sound Card, USB bluetooth dongle, etc.):
Name: Webcam
Manufacturer: Logitech
Works? (Y/N, if "Y", list patches, if needed) Yes. Used macam
Patches/Work out of the box? Used Macam Drivers

Current OS X Version: 10.5.2

Desktop/Laptop? Desktop

Prebuilt? No

Install Methods summary: Kalyway 10.5.2 disc (Not Combo Updated)

Does EFI and/or the Vanilla kernel work? GUID and EFI v8 both work. Vanilla not tested. Using 9.20 Shutdown Kernel.

Motherboard
Manufacturer: Gigabyte
Motherboard Model: P35-DS3L Rev 2
Chipset: Unknown
BIOS Version: Unknown
Revision: Unknown
BIOS setup options: AHCI enabled
Audio: Works out of the box. Shows up as "HD Audio Output" Though AppleHDA patcher adds more outputs.
LAN: Works out of the box? Yes
SATA & IDE: Works out of the box? All 4 SATA ports work with AHCI enabled. IDE untested.

Processor
Processor Model: Q6600
Speed: 2.4 GHz
Recognized as what in System Profiler: 2.4GHz unknown

Video Card (if you have integrated and PCI/AGP, use this template twice)
What type of card (PCI Express/AGP/Integrated): PCIe
NVIDIA/ATI/Intel? Nvidia
Model: 8800GT
Memory: 512mb
Board Manufacturer: BFG
Patches used: Nvinject 0.4.1
QE/CI: Yes, Yes
All resolutions available? Yes

Sleep and Shutdown work perfectly. Everything works out of the box! I even HEARD the music that goes with that extremely long and redundant welcome video just after installation, but it sucked so whatever.

Current OS X Version: 10.5.2

Desktop/Laptop?
Desktop

Prebuilt? No.

Install Methods summary: Leo4Allv2

Does EFI and/or the Vanilla kernel work? Partitioned as MBR, unknown if EFI works, use AMD kernel and patches.

(in following sections, if you don't know or not sure, write "unknown")
Motherboard
Manufacturer: Biostar
Motherboard Model: TFORCE TF520-A2
Chipset: NVIDIA nForce 520
BIOS Version: Unsure, whichever version came on the board.
BIOS setup options: SATA set to IDE
Audio: Works out of the box, only stereo, ALC888 Driver on Leo4All disc
LAN: Realtek 8110SC, works out of box, uses Realtek 8169 driver.
SATA & IDE: Both work, use NforceTest driver on Leo4All disc.

Processor
Processor Model: AMD Athlon 64 X2 4200+
Speed: Stock 2.2GHz, overclocked to 2.75GHz
Recognized as what in System Profiler: AMD Athlon 64 X2 4200+

Video Card
What type of card (PCI Express/AGP/Integrated): PCI Express 16x
NVIDIA/ATI/Intel? NVIDIA
Model: MX8500GT-TD256
Memory: 256MB
Board Manufacturer: MSI
Patches used: NVIDIA drivers by Punk92, use the NVInject 256 MB patch included with his driver
QE/CI: Both supported
All resolutions available? Yes.

Current OS X Version: 10.5.2

Desktop/Laptop? Desktop

Prebuilt? (Y/N) N
(If prebuilt then add following information, otherwise fill the Motherboard:)
Manufacturer: (example Dell?)
Model: (example Inspiron xxx?)

Install Methods summary: (List all methods tested, check preferred method - the one you are writing about now)
Install using Kalyway 10.5.2 EFI V8 - works needing VIARhine.kext patch, audio works with AppleAC97Audio patch and audio set to 48000hz, NVidia FX 5200 works with NVinject

XXX install using ToH 10.5.2 - works needing VIARhine.kext patch, audio works but distorted with AppleAC97Audio patch, NVidia FX 5200 works with NVinject

Does EFI and/or the Vanilla kernel work? (example: partitioned as MBR, EFI v8 + Vanilla Kernel) YES

(in following sections, if you don't know or not sure, write "unknown")
Motherboard
Manufacturer: MSI
Motherboard Model: P4MAM2-V
Chipset: VIA P4M266A + 8237®
BIOS Version: , Revision: Award, 4-13-2006
BIOS setup options: Default options
Audio: VIAAC97Audio patch
LAN: ViaRhine patch
SATA & IDE: OOB

Processor
Processor Model: Intel Celeron-D
Speed: 2.4Ghz
Recognized as what in System Profiler: MacPro 3,1

Video Card (if you have integrated and PCI/AGP, use this template twice)
What type of card (PCI Express/AGP/Integrated): AGP
NVIDIA/ATI/Intel? NVidia
Model: Geforce FX 5200
Memory: 256Mb
Board Manufacturer: XFX
Patches used: NVinject
QE/CI: QE & CI
All resolutions available? Yes

Other PCI/PCI-e Components (USB are listed in Other Accessories below)
Wireless/Wired Card (for PCI/PCI-e cards only)
Interface: PCI/PCI-e?
Standard (Wireless only): (example: 801n)
Manufacturer:
Model:
Works? (Y/N, if "Y", list patches)
Patches:

Sound Card (this is for PCI/PCI-e cards only - integrated on motherboard is in motherboard section)
Interface: PCI/PCI-e?
Manufacturer:
Model:
Works? (Y/N, if "Y", list patches)
Patches:

Other Accessories (USB/FIREWIRE)
Type (Webcam, External Sound Card, USB bluetooth dongle, etc.): Printer
Name: Stylus Photo R200
Manufacturer: Epson
Works? (Y/N, if "Y", list patches, if needed) Y
Patches/Work out of the box? OOB

Type (Webcam, External Sound Card, USB bluetooth dongle, etc.): Printer
Name: HP Deskjet 6122
Manufacturer: Hewlett Packard
Works? (Y/N, if "Y", list patches, if needed) Y
Patches/Work out of the box? OOB with driver download from HP

Other Accessories (USB/FIREWIRE)
Type (Webcam, External Sound Card, USB bluetooth dongle, etc.): SD Card Reader
Name: Card reader
Manufacturer: Ohm
Works? (Y/N, if "Y", list patches, if needed) Y
Patches/Work out of the box? OOB

Other Accessories (USB/FIREWIRE)
Type (Webcam, External Sound Card, USB bluetooth dongle, etc.): MagicJack
Name: MagicJack
Manufacturer: MagicJack
Works? (Y/N, if "Y", list patches, if needed) Y
Patches/Work out of the box? OOB

My install was successful look at my sig.

Current OS X Version: 10.5.2

Desktop

Prebuilt? N

Install Methods summary: Kalyway 10.5.1 DVD, updated to 10.5.2 using Combo update following this guide http://forum.insanelymac.com/index.php?showtopic=83689

Does EFI and/or the Vanilla kernel work? partitioned as MBR, EFI v8 + Vanilla Kernel work


Motherboard
Manufacturer: ASUSTek Inc.
Motherboard Model: P5B-VM
Chipset: G965 + ICH8
BIOS Version: 0901
BIOS setup options: SATA set as Basic on JMicron 363
Audio: Apple HDA Patcher v1.19 http://wiki.taruga.net only Stereo Output
LAN: Works out of the box
SATA & IDE: Works out of the box

Processor
Processor Model: Intel Core 2 Duo E6600
Speed: 2.88 GHz
Recognized as what in System Profiler: Intel Core 2 Duo E6600 @ 2.88 GHz

Video Card
What type of card: PCI Express
nVIDIA
Model: 8800 GTS
Memory: 640 MB
Board Manufacturer: eVGA
Patches used: NVInstallerV.41 http://forum.insanelymac.com/index.php?showtopic=83931
QE/CI: Supported/Hardware Accelerated
All resolutions available? Yes


Other Accessories (USB/FIREWIRE)
Type: MIDI Interface
Name: UM2-EX
Manufacturer: EDIROL
Works? Works out of the box

Current OS X Version: 10.5.2

Desktop/Laptop? Laptop

Prebuilt? (Y/N) Y
Manufacturer: Gateway
Model: M285-E Tablet PC - Complete Specification here

Install Methods summary: Kalyway 10.5.2 DVD - Default installation + Power Management Bundle

BIOS setup options: USB Legacy: Disabled ; Intel VT: Enabled ;
Audio: AppleHDAPatcher v1.20 + Sigmatel 9250.txt
LAN: Works
SATA & IDE: Works

Processor: Intel Core2Duo
Processor Model: T5500
Speed:1.66ghz
Recognized as what in System Profiler: Properly Recognized

Video Card:
What type of card (PCI Express/AGP/Integrated):PCIe
NVIDIA/ATI/Intel: ATI
Model:x1400 Mobile
Memory: 64MB GDDR3 Base / 256mb w/HyperMemory
Board Manufacturer: N/A
Patches used: None
QE/CI: Yes - Fluid - No Artifacts/Mouse Tearing
All resolutions available: 1024x768 Reported - See note.

Notes: Display is crystal clear, fullsized, doesn't appear to be stretched - perhaps native resolution with misreporting in the OS.  USB will not work by default unless legacy mode is disabled.  Sigmatel 9250 .txt for HDA Patcher here

Hi i can littlle speak english

I am use 15.2 on IBM x series 226 desktop computer
All compenents is work.



Model Name: Mac
Model Identifier: MacPro3,1
Processor Name: Intel® Xeon™ CPU
Processor Speed: 3.2 GHz
Total Number Of Cores: 3
L2 Cache (per processor): 1 MB
CPU Features: FPU VME DE PSE TSC MSR PAE MCE CX8 APIC SEP MTRR PGE MCA CMOV PAT PSE36 CLFSH DS ACPI MMX FXSR SSE SSE2 SS HTT TM SSE3 MON DSCPL CID CX16 TPR
Memory: 2 GB
Bus Speed: 800 MHz
Boot ROM Version: Hack.88Z.int.0sh.061193037 (IBM)


NVIDIA GeForce 6600:

Chipset Model: NVIDIA GeForce 6600
Type: Display
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 256 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0141
Revision ID: 0x00a2
Displays:
SDM-S95AR/ER:
Resolution: 1280 x 1024 @ 75 Hz
Depth: 32-bit Color
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
Display Connector:
Status: No display connected


Serial-ATA Bus:

SAMSUNG HD161HJ:

Capacity: 149.05 GB
Model: SAMSUNG HD161HJ
Revision: JF100-19
Serial Number: S0V3J1FP905756
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Mac OS 9 Drivers: No
Partition Map Type: MBR (Master Boot Record)
S.M.A.R.T. status: Verified
Volumes:
Leopard:
Capacity: 149.05 GB
Available: 126.76 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s1
Mount Point: /


USB Bus:

Host Controller Location: Expansion Slot
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x24d4
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0x3d

USB Bus:

Host Controller Location: Expansion Slot
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x24de
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0x7d

USB Bus:

Host Controller Location: Expansion Slot
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x24d7
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0x5d

USB Bus:

Host Controller Location: Expansion Slot
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x24d2
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0x1d

Hub in Apple USB Keyboard:

Version: 2.10
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Alps Electric
Product ID: 0x1001
Vendor ID: 0x05ac (Apple Computer, Inc.)

Microsoft 3-Button Mouse with IntelliEye™:

Version: 0.00
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Microsoft
Product ID: 0x007d
Vendor ID: 0x045e

Apple USB Keyboard:

Version: 1.02
Bus Power (mA): 250
Speed: Up to 1.5 Mb/sec
Manufacturer: Alps Electric
Product ID: 0x0202
Vendor ID: 0x05ac (Apple Computer, Inc.)

Hub in Apple USB Keyboard:

Version: 2.10
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Alps Electric
Product ID: 0x1001
Vendor ID: 0x05ac (Apple Computer, Inc.)

Microsoft 3-Button Mouse with IntelliEye™:

Version: 0.00
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Microsoft
Product ID: 0x007d
Vendor ID: 0x045e

Apple USB Keyboard:

Version: 1.02
Bus Power (mA): 250
Speed: Up to 1.5 Mb/sec
Manufacturer: Alps Electric
Product ID: 0x0202
Vendor ID: 0x05ac (Apple Computer, Inc.)

Microsoft 3-Button Mouse with IntelliEye™:

Version: 0.00
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Microsoft
Product ID: 0x007d
Vendor ID: 0x045e

Apple USB Keyboard:

Version: 1.02
Bus Power (mA): 250
Speed: Up to 1.5 Mb/sec
Manufacturer: Alps Electric
Product ID: 0x0202
Vendor ID: 0x05ac (Apple Computer, Inc.)

USB High-Speed Bus:

Host Controller Location: Expansion Slot
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x24dd
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0xfd

Laptop

Prebuilt? Y
Manufacturer: Dell
Model: Vostro 1500

Install Methods summary: kalyway 10.5.1+PC_EFIv8.0+brazilMac= the perfect installation; updated to 10.5.2 with Netkas methods at: http://netkas.org/?p=50, and use speedstep/smbios kernel from netkas again at http://netkas.org/?p=51

Does EFI and/or the Vanilla kernel work? yes, works if you follow the Netkas guide at the link above!

BIOS Version: A04
BIOS setup options: Speedstep Enabled
Audio: Stac9205.txt + Patched AppleHDA.kext
LAN: Broadcom 440x
SATA & IDE: Works out of the box

Processor
Processor Model: T5270
Speed: 1.4 Ghz
Recognized as what in System Profiler: Intel Core2Duo 1.4 Ghz

Video Card
What type of card (PCI Express/AGP/Integrated): PCI-E
Model: Intel GMA X3100
Memory: dedicated 16 MB;
Patches used: Natit.kext NOT needed anymore, work natively with graphic updater 1.0; however, the trick is to press fn-F8 to bring the display to the external display at start-up(external display need at this step), then screen will come back to internal LCD, with both display supported. also need to remove AppleIntelGMA950* and AppleIntelIntegratedFrameBuffer.kext. (do backup before you change)
QE/CI: Yes
All resolutions available? Yes

Other PCI/PCI-e Components
Wireless/Wired Card Dell 1390 Wireless | Broadcom 440x Ethernet
Interface:PCI-mini
Standard 802.11g
Manufacturer: Dell
Model: Dell 1390
Works? Yes; Dell 1395 (an upgraded version of 1390) won't work at all! I call them to changed back to 1390.
Patches: N/A

Sound Card
Interface: On-Board
Manufacturer: Sigmatel
Model: 9205
Works? Yes
Patches: Stac9205.txt + Patched AppleHDA.kext

Other Accessories
Firewire, DVD work perfectly

Not Working:
SD/MMS Card Reader, Infra-sensor.

Untested:
Bluetooth.

Current OS X Version: 10.5.2

Desktop/Laptop? Desktop

Prebuilt? N


Install Methods summary: Guide from ~pcwiz

Does EFI and/or the Vanilla kernel work? MBR, netkas kernel

Motherboard
Manufacturer: Gigabyte
Motherboard Model: P35-DS3P
Chipset: P35
BIOS Version: unknown Revision: 2.1
BIOS setup options: see guide from ~pcwiz
Audio: Works out of the box? No, Patch from ~pcwiz
LAN: Works out of the box? Yes
SATA & IDE: Works out of the box? Yes

Processor
Processor Model: E8200
Speed: 2x2,67
Recognized as what in System Profiler: 1 CPU with 2 cores (MacPro3,1)

Video Card
What type of card (PCI Express/AGP/Integrated): PCI Express
NVIDIA/ATI/Intel? NVIDIA
Model: EN8600GT
Memory:256Mb
Board Manufacturer: Asus
Patches used: NVInstaller V.41 with netkas kernel
QE/CI: Yes
All resolutions available? Yes

Other PCI/PCI-e Components No
Wireless/Wired Card No

Very pleased to report the following configuration working pretty well:

Desktop
Prebuilt? No
Install Methods summary: Kalyway 10.5.2
Does EFI and/or the Vanilla kernel work? Not sure: whatever a default install of Kalyway is.

Motherboard
Manufacturer: Gigabyte
Motherboard Model: GA-EP35-DS4
Chipset: Intel P35, ICH9R
BIOS Version: , Revision: Bios version F3, Revision 2.1
BIOS setup options: SATA: AHCI
Audio: Out of the box
LAN: Out of the box
SATA & IDE: SATA out of the box (haven't any IDE drives)

Processor
Processor Model: Intel Core2Quad Q6600
Speed: 2.4 GHz
Recognized as what in System Profiler: 2.4 GHz unknown (If I recall correctly)

Video Card (if you have integrated and PCI/AGP, use this template twice)
What type of card (PCI Express/AGP/Integrated): PCI-e
NVIDIA/ATI/Intel? ATI
Model: HD 2600 XT
Memory: 512MB DDR3
Board Manufacturer: Sapphire
Patches used: Natit Feb/08 (I think.. I looked at a bunch of posts in this forum, the first thing I tried worked)
QE/CI: Both
All resolutions available? Yes

Other Accessories (USB/FIREWIRE)
Type (Webcam, External Sound Card, USB bluetooth dongle, etc.): Webcam
Name: QuickCam Pro 9000
Manufacturer: Logitech
Works? Video works, Audio does not
Patches/Work out of the box? Installed iChatUSB

Note also: Using 4GB of memory and 2 500GB Western Digital hard drives.

Haven't had any problems since installing. Have noticed the temperature is 5-10 degrees warmer than in Vista under normal conditions. Also, sleep "sort of" works, in the sense that it will go to sleep and come back - however, I have noticed that the network connection is dropped.

- Joe

Current OS X Version: 10.5.2

Desktop/Laptop? Desktop

Prebuilt? No


Install Methods summary: Installed Zephyroth 10.5.2 onto an internal IDE hard drive that is in an external enclosure. Put PC_EFI_v8 (found in:http://forum.insanelymac.com/index.php?showtopic=87589) folder onto my Linux drive and patched GRUB to boot to it.

Does EFI and/or the Vanilla kernel work? Yes

(in following sections, if you don't know or not sure, write "unknown")
Motherboard
Manufacturer: ASUS
Motherboard Model: A8N5X
Chipset: nForce 4
BIOS Version: , Revision:
BIOS setup options: No BIOS changes needed
Audio: Installed AC97 audio driver that came with Zepyroth DVD.
LAN: Have not attempted the nForce 4 LAN driver patch.
SATA & IDE: Works

Processor
Processor Model: AMD Athlon 64 3200+
Speed: 2.0
Recognized as what in System Profiler: AMD Athlon 64 3200+

Video Card (if you have integrated and PCI/AGP, use this template twice)
What type of card (PCI Express/AGP/Integrated): PCI Express
NVIDIA/ATI/Intel? NVIDIA
Model: 7600gs
Memory: 256mb
Board Manufacturer: XFX
Patches used: Zephyroth Universal NVIDIA installer (found on: http://osx86.wikidot.com/utilities-resources)
QE/CI: Both work
All resolutions available? Yes

Other PCI/PCI-e Components (USB are listed in Other Accessories below)
Wireless/Wired Card (for PCI/PCI-e cards only)
Interface: PCI
Standard (Wireless only): 802.11g
Manufacturer:Motorola
Model: Uknown
Works? Yes
Patches: None required.



Other Accessories (USB/FIREWIRE)
Type (Webcam, External Sound Card, USB bluetooth dongle, etc.): Printer
Name: HP Photosmart C5280
Manufacturer: HP
Works? Yes
Patches/Work out of the box? Used standard Mac drivers found on HP website. Everything works.

90% Success install. No Lan

Current OS X Version: 10.5.2

Desktop/Laptop?
Laptop

Prebuilt? Yes
Manufacturer: Dell
Model: Latitude D830

Install Methods summary: Used Kalyway 10.5.2 / Leo4All (the first one doesn t boot)

Does EFI and/or the Vanilla kernel work? MBR, EFI + Vanilla Kernel works great

Motherboard
Manufacturer: Unknown
Motherboard Model: Unknown
Audio: Yes but not out of box : see Sigmatel topic. Almost everything works well (except volume input)
LAN : no (Broadcom 57xx)
SATA & IDE: Yes (AHA and AHCI)

Processor
Processor Model: Intel Core 2 Duo T7300
Speed: 2.0 Ghz
Recognized as what in System Profiler: 2.0ghz Unknown

Video Card
What type of card (PCI Express/AGP/Integrated): PCI
NVIDIA/ATI/Intel? nVidia
Model: NVS 140m (~8400 GS)
Memory: 512MB DDR2
Board Manufacturer: Unknown
Patches used: nVidia Universal installer with self added device id.
QE/CI: Supported fully
All resolutions available? Yes, VGA output also works after changing NVCAP value (NVinject)

Other PCI/PCI-e Components (USB are listed in Other Accessories below)
Wireless/Wired Card (for PCI/PCI-e cards only)
Interface: PCI/PCI-e? PCI
Standard (Wireless only): 802.11 a/b/g
Manufacturer: Broadcom
Model: 4312
Works? Yes, out of the box

Some additional information.

USB - Hardware Growler tells me that devices (usb keys, HDD drives) are being recognized, but they don't mount.
Ethernet - Apparently only works for gigabit connections.
Video - is indeed running 1024x768, but stretches in a very clean manner.
Sound - Is a bit LOUD by default, be sure to bring those mixer levels down.
TabletPC - Work In Progress to be sure.  I've gotten it recognized, but no functionality as of yet.

This installs fine but still no wireless with my acer 5633, anyone know which option to select if there is a way ??? Please PM me if so any replies will get lost on here thanks

No USB either but at least I don't need the DVD in the drive now to boot up

Current OS X Version: 10.5.2 Leo4All v3

Desktop

Does EFI and/or the Vanilla kernel work?
Vanilla 9.2.2

(in following sections, if you don't know or not sure, write "unknown")
Motherboard
Manufacturer: Gigabyte
Motherboard Model: P35-DS3
Chipset: Intel
BIOS Version: Newest , Revision: Rev. 2
BIOS setup options: No AHCI
Audio: Works, ALC889a (dl the kext and install it)
LAN: Works out of the box!
SATA & IDE: Works out of the box!

Processor
Processor Model: Intel Q6600 G0
Speed: 2400mhz
Recognized as what in System Profiler: Intel® Core™2 Quad CPU Q6600 @ 2.4Ghz

Video Card
What type of card (PCI Express/AGP/Integrated): PCIe
NVIDIA/ATI/Intel: NVIDIA
Model: 8800 GTS
Memory: 320mb
Board Manufacturer: MSI
Patches used: None
All resolutions available: Yes.
Dual Monitor: Yes!

Wireless/Wired Card
Zydas USB Stick won't work.

OS=Kallyway 10.5.2(latest)

Laptop
Prebuilt=Yes
Manufacturer-Tohsiba
Toshiba A105-s2236=Model

I did not test any of the kernels (not used)

Install summary-Kallyway 10.5.2 used w/nero 8 Trial at lowest speeds w/normal options checked

Motherboard
Manufacturer-Unknown
motherboard model-unknown
Audio-Perfect
Lan-Yes
Sata & ide -yes

Processor
Processor model-intel celeron M
speed-1.6

Video card
PCI
Intel
Model-Unknown
memory-1.5 Gigs
Board Manufacturer-Unknown intel most likely
patches-None
Qe/CI:seems Fine
All resolutions available

Other-Nothing but a PCI atheros wireless card (but the full info i dont know)

Hope this helps.

Notebook Toshiba Satellite P20-962 finaly works fast (but only SSE2 & VESA)

Current OS X Version: 10.5.2  (9C31) Darwin 9.20  up with  iATKOS & Kalyway Combo

Notebook   Prebuilt

Manufacturer:  TOSHIBA
Model:  Satellite  P20-962  with  17" SVGA LCD Display (dual monitor support)

Install Methods summary:  

iATKOSv1.0R2 LEO 10.5.1 Standard with Darwin x86 loader (EFI dont works), SSE2 Kernel with both remove options & AGPGART 2.49 for graphics & Network RTL8139.
After 1st start direct Kalyway Combo 10.5.2 Upg. Package & GFX Full 1.1 Upd. Package (standard with opt. AGPGART & 8139 & Cardbus) in one step.


OSx86 in Dual Boot (Xista) down under Acronis boot loader (partitioned as 1st in MBR with Darwin x86 loader)


Motherboard

Manufacturer:  Toshiba
Motherboard Model:  Satellite P20  (DBQ02)
Chipset:  intel Springdale  i865PE  
BIOS Version:  Phoenix , Revision:  1.5
BIOS setup options: nativ
Audio:  Realtek ALC202 AC`97 works without patch  (later AC97.kext upgrate from Kalyway
LAN:  Realtek RTL8139 works out of the box with 8139.kext
No SATA on board, IDE works out of the box, 2 Devives (1*HDD 160GB, 1*DVD RW)


Processor

Processor Model:  intel P4 Northwood HT  (Northbridge/Southbridge)
Speed:  3.0 GHz
Recognized as what in System Profiler:  MacPro 3.1  P4  2.99 GHz  1CPU

Video Card  - integrated  AGP 8x
 
nVIDIA
Model:  Geforce FX Go5700    (10de-0348)
Memory:  64 MB RAM
Board Manufacturer:  Toshiba
Patches used: AGPGART 2.49  (Natit, Titan, NVinject & more tested, but no chance)
QE/CI:  Dual Monitor supported

All resolutions available? No, only poor 1024*768*32 in DARWIN VESA 3.0   

Wireless - integrated

Manufacturer: Atheros
Model: AR5001X
Works? No, but detected (always testing)
Patches: Orangeware 3.3  not supported on intel machine

Sound Card - on motherboard @ integrated harman/kardon soundsystem

Other Accessories

USB:  4* USB 2.0  working without patches (1* eyeTV on USB Stick, works 
                                                             1* Logitech optical wireless mouse, working
                                                             1* Ext. Storage & TM Disk (sleep mode), perfect
                                                             1* 8 GB USB Stick, OK)

FIREWIRE: 1* 1394  working without patches

Cardbus: detected (cardbus kext from GFX Full 1.1 Package), testing

Touchpad: pad & 2 buttons (without any patches)

Power Management supported, working on disk, USB & LCD mode, with sleep & wake up


boot time by 45 seconds, System works fast, no shutdown/restart problems, thx2all  

  TimeMachine works fine. (after 2 fixes from LEO4AllV2 release). 

No offical TM Update! cause integrated new Kernel 9.22 not working at this time  

Current OS X Version: 10.5.2

Desktop

Prebuilt? N

Install Methods summary: Kalyway 10.5.2 DVD Intel_AMD (SSE2/SSE3) EFI V8

Does EFI and/or the Vanilla kernel work?
partitioned as GUID, EFI v8 + Vanilla Kernel)


Motherboard
Manufacturer: ECS
Motherboard Model: 945GZT-M
Chipset: Intel^® 945GZ, Intel^® ICH7
BIOS Version: , Revision: 1/1/2007
BIOS setup options: CPU TM FUNCTION: ENABLED, EXCUTE DISABLE BIT: ENABLED, ENHANCED HALT: ENABLED, APIC MODE: ENABLED
Audio:
LAN: YES
SATA & IDE: YES

Processor
Processor Model: E4300
Speed: 1.8GHZ
Recognized as what in System Profiler: 1.8GHZ INTEL CORE 2 DUO

Video Card
Model: INTEL GMA950
Memory: 8MB (SHARED)
Board Manufacturer: ECS
Patches used: NONE USED (GMA950 DRIVERS ON DISC USED)
QE/CI: YES/YES
All resolutions available?

Other PCI/PCI-e Components NONE
Wireless/Wired Card NONE
Interface: ON BOARD
Manufacturer: REALTEK
Model: RTL8100C
Works? Y
Patches: USED DEFAULT ENABLED DRIVERS ON DISK

Sound Card
Interface: ON BOARD
Manufacturer: REALTEK
Model: ALC883
Works? Y
Patches: USED DEFAULT ENABLED DRIVERS ON DISK

Other Accessories
NONE


THIS BOARD AND PROCESSOR WORK PERFECTLY! USING DEFAULT SETTINGS ON INSTALL DISK ENABLED, INTEL GMA950 DRIVER INSTALLED

945GZT-M, INTEL CORE2DUO E4300, 80GB IDE HD, IDE NEC DVD+RW ND-1100A, 1GB PC5300

Current OS X Version: 10.5.2

Desktop/Laptop? Desktop

Prebuilt? (Y/N) No

Install Methods summary: Kalyway 10.5.2 Intel/AMD

Does EFI and/or the Vanilla kernel work? unknown

(in following sections, if you don't know or not sure, write "unknown")
Motherboard
Manufacturer:Epox
Motherboard Model:EP-9NPA Ultra
Chipset:nForce 4 Ultra
BIOS Version: , Revision:unknown
BIOS setup options: Normal, LAN Disabled
Audio: Works out of the box? yes, with nvidia AC97 patch
LAN: Works out of the box? partial with forcedeth (no afp access for some reason) a Realtek PCI card worked perfectly
SATA & IDE: IDE yes, SATA not tested

Processor
Processor Model:Athlon 64 X2 4200+ Socket 939
Speed:2.2Ghz
Recognized as what in System Profiler: Unknown 2.2Ghz

Video Card (if you have integrated and PCI/AGP, use this template twice)
What type of card (PCI Express/AGP/Integrated): PCIe
NVIDIA/ATI/Intel?Nvidia
Model:6600GT
Memory:128MB
Board Manufacturer:Gigabyte
Patches used:NVInject 0.2.0 128
QE/CI:y/y
All resolutions available? so far up to 1280x1024

Other PCI/PCI-e Components (USB are listed in Other Accessories below)
Wireless/Wired Card (for PCI/PCI-e cards only)
Interface: PCI/PCI-e?PCI
Standard (Wireless only): (example: 801n)
Manufacturer:??
Model:Realtek
Works? (Y/N, if "Y", list patches)Y
Patches:


Other Accessories (USB/FIREWIRE)
Type (Webcam, External Sound Card, USB bluetooth dongle, etc.):onboard firewire
Name:
Manufacturer:
Works? (Y/N, if "Y", list patches, if needed)y
Patches/Work out of the box?

zephyroth kalyway & leo4all
processor: amd athlon x2 dual core 4400+
motoherboard asus m2npv-vm
graphics:geforce 6150 no qe/ci (using macvidia or by removing nvdaresman).....
nforce 430 lan working with nforcethernetcontroller link:
audio soundmax hd audo working...(no audio in) link:
everything working fine but no qe/ci.....

installation guide:http://forum.insanelymac.com/lofiversion/index.php/t83688.html

Current OS X Version: 10.5.2

Desktop Home made

Prebuilt: No

Install Methods summary: (Kaliway 1.5.2 default + Nvinjet 256Mo working other (Leo4all, ...) crash during installation

Does EFI and/or the Vanilla kernel work? No, used default options from Kaliway DVD which is not Vanilla

Motherboard
Manufacturer: Asrock
Motherboard Model: Conroe1333-1394
Chipset: 945GC A2 + ICH7
BIOS Version: 1.0
BIOS setup options:
- voltage settings at the bottom of chipset page to HIGH
- under CPU settings: No Execute option is Disabled
Audio: Realtek ACL888 works out of the box
LAN: Realtek RTL8111B / RTL8111C works out of the box
SATA & IDE: SATA works out of the box - IDE not tested

Processor
Processor Model: E6550
Speed: 2.33
Recognized as what in System Profiler: Intel Core 2 Duo 2.33GHz

Video Card
What type of card: PCI Express
NVIDIA
Model: 8600GT
Memory: 256
Board Manufacturer: Asus
Patches used: No
QE/CI: Don't know what that is
All resolutions available: Yes

No Other PCI/PCI-e Components

Other Accessories
Bluethooth USB Key
Manufacturer: MSI
Work out of the box with Kaliway 1.5.2 (chipset Broadcom) but not with the wireless Mighty mouse (Detected but not possible to "register" the mouse)

So far, very stable BUT sleep not working well (wake up sucessfully but no more ethernet card...)

After installing Kaliway 10.5.2 and when my computer starts it will just show a blank screen after rebooting.and i try to install zeproth 10.5.2 it will say CPU panic.what does it means?

What is your configuration?
Gives as many details as possible (see my signature for an example)

Hi Bootoo,

thanks for fast reply..here is my system configuration:


CPU Arch : 1 CPU - 2 Cores - 2 Threads
CPU PSN : AMD Turion 64 X2 Mobile Technology TL-60
CPU EXT : MMX(+) 3DNow!(+) SSE SSE2 SSE3 x86-64
CPUID : F.8.2 / Extended : F.48
CPU Cache : L1 : 2 x 64 / 2 x 64 KB - L2 : 2 x 512 KB
Core : Trinidad (90 nm) / Stepping : BH-F2

Freq : 2009.07 MHz (200.91 * 10)
MB Brand : Quanta
MB Model : 30B8
NB : NVIDIA GeForce Go 6100 rev A2
SB : NVIDIA nForce 410/430 MCP rev A3

GPU Type : GeForce Go 7200
GPU Clocks : Core 450 MHz / RAM 700 MHz
DirectX Version : 10.0

RAM : 2048 MB DDR2 Dual Channel
RAM Speed : 334.8 MHz (CPU/6) @ 5-5-5-13
Slot 1 : 1024MB (PC2-5300)
Slot 1 Manufacturer : Samsung
Slot 2 : 1024MB (PC2-5300)
Slot 2 Manufacturer : Samsung

hope you can help me with this..

p.s it only succesfully once on kaliway,but after i restart. it wont boot up.

LOADED THE KALYWAY 10.5.2, RAN FORMAT FOR HFS JOURNALED, 10 MINUTES LATER UP AND RUNNING, NO GLITCHES NO PROBLEMS, FASTEST BOOT AND SYSTEM LOAD IVE SEEN, RUNS ILIFE, LOGIC PRO 8, CUBASE 4, REASON 4, RME FIREFACE 800, AXIOM 61, USED APPLE UPDATE......NO PROBLEMS AT ALL! EVERYTHING VERY FAST.

HARDWARE; GIGABYTE GA-P35-DS3L MOTHERBOARD, INTEL Q6600 PROCESSOR, CORSAIR 4 GIGS DDR2-800 CL 5-5-5-12 MEMORY, WESTERN DIGITAL CAVIAR 250 GIG 16M CACHE SATA HARD DRIVE, NVIDIA 7900 GT KO 512M PCIX VIDEO CARD.

XBENCH RESULTS 166.94

Sorry but not competent with AMD...
Looks like a laptop right?

Have a look at the list of compatible components below:
http://wiki.osx86project.org/wiki/index.php/Main_Page

You can also try the list of compatible laptop here:
http://wiki.osx86project.org/wiki/index.ph...0.5.2/Portables

From a general point of view, you need to ask yourself 2 questions:
- Is my hardware compatible? (Installed sucessfully by someone else is the best)
- Do I have the right Bios version and the right parameters in it

If you can answer YES to these 2, it should be dead easy...
Good luck

Thanks BooToo!

Current Version: 10.5.2 (Kalyway)

Laptop

Prebuilt: Yes

Manufacturer: Hewlett Packard (HP)
Model: Pavilion dv9540us

Install Method:

Part 1: http://www.youtube.com/watch?v=Gd6YcIw0Aik
Part 2: http://www.youtube.com/watch?v=WRSbKTxATbQ

Motherboard
Manufacturer: Quanta
Motherboard Model: 30CB
Chipset: Intel GM965
BIOS Version: F.08 , Revision: Unknown
BIOS setup options: None, only error checking features enabled.
Audio: Used 268Installer2 then Azalia Audio, then 268Installer2 again for my Realtek HD Audio (268)
LAN: Used r1000 patch
SATA & IDE: Works out of the box

Processor
Processor Model: Intel Core 2 Duo
Speed: 1.5GHz
Recognized as what in System Profiler: Intel Core 2 Duo

Video Card
What type of card: PCI Express x16
NVIDIA
Model: 8600M GS
Memory: 256 VRAM, 768 shared by system
Board Manufacturer: Hewlett Packard (HP)
Patches used: NVinject 4.1, NVinjectGO, NVinject 256MB
QE/CI: Fully supported

Other PCI/PCI-e Components
Wireless
Interface: PCI-e
Wireless: a/g/n
Manufacturer: Intel
Model: Intel 4965 a/g/n
Works? No.
Patches: None available

Other PCI/PCI-e Components (USB are listed in Other Accessories below)
Wired Card
Interface: PCI/PCI-e?
Manufacturer: Realtek
Model: Realtek RTL8168B/8111B Family PCI-E Gigabit Ethernet NIC
Works? Yes
Patches: r1000 (included in the 10.5.2 kalyway disc)

Other Accessories (USB/FIREWIRE)
Type: Webcam
Name: HP Webcam
Manufacturer: Chicony Technologies
Works? No.

Note: my fingerscanner thingy is recognized in OS X, but i don't think ther is something for OS X to use it with...

IBM Thinkpad R40 runs with "Kalyway_10.5.2_DVD_Intel_Amd" out of the box (sound, network, usb, screen 1024x768)

Current OS X Version: Kalyway 10.5.2

Desktop

Prebuilt? N

Install Methods summary: (List all methods tested, check preferred method - the one you are writing about now)

Does EFI and/or the Vanilla kernel work? Y
(in following sections, if you don't know or not sure, write "unknown")
Motherboard
Manufacturer: Intel
Motherboard Model: DG33BU
Chipset: G33 Express
BIOS Version: , Revision: Unknown
BIOS setup options: SATA needs IDE for install, AHCI after
Audio: Y
LAN: N (needed to buy Netgear adapter)
SATA & IDE: Y (only SATA)

Processor
Processor Model: Intel Core 2 Quad Q9300
Speed: 2.5Ghz
Recognized as what in System Profiler: 2.5ghz Unknown

Video Card (if you have integrated and PCI/AGP, use this template twice)
What type of card (PCI Express/AGP/Integrated): PCI-e
NVIDIA
Model: 8600GT
Memory:266MB
Board Manufacturer: EVGA
Patches used: nvinject
QE/CI:Both
All resolutions available? Y

can someone assist me on this problem... i dont know how to solve this.

Current OS X Version: 10.5.2

Desktop/Laptop: Desktop

Prebuilt: N

Install Methods summary: LEO4ALLv2
EFI v8 using ls8 pre-script. GUID Partition map.
Everything's working perfectly.


Motherboard
Manufacturer: ASUS
Motherboard Model: MAXIMUS-EXTREME
Chipset: X38 + ICH9R
BIOS Version: 1004
Audio: AD1988
LANs: 2 x MARVEL YUKON, not still works, but installed one PCI Realtek 8139 NIC and work perfectly. I will examine the malfunction of the Marvel Yukon later
SATA: seems to work: only HD installed Maxtor SATA II 160 Gb on 3d AHCI (controller mode) port

Processor
Processor Model: Intel Core 2 Quad - All cores working
Speed: 2.4GHz (Q6600) OC'ed to 3.61 GHz
Recognized as what in System Profiler: 3.61 Ghz

Memory
2x1 Gb OCZ DDR3 1600 MHz (recognized from System Profiler as 106 MHz) I must correct this...

Video Card
What type of card: PCI Express
NVIDIA
Model: 8800GT
Memory: 320 MB
Board Manufacturer: POINT OF VIEW
Patches used: NVinject from 10.5.2 (v.33)
QE/CI: Yes
All resolutions available: Yes
Monitor: Philips P200 correctly recognized at maximu resolution of 1600x1200 @ 71 Hz
Dual Monitor: not still tried.

Misc
AHCI activated in BIOS.
J-Micron controller disactivated in BIOS.
OS installed via USB DVD Player
Still testing all the environment... when finished i'll post my final result with the benchmark
http://www.youtube.com/watch?v=htlqZVD1lxQ

The Specs
D915GAG intel board
P4 3.0 GHz Prescott (630) processor
x1900xtx
2 gig ram
80 gig seagate sata HD

The install
Kalyway 10.5.2 DVD Intel_Amd
formated MBR, drive name leo
I turned off languages, fonts,
used kabyl kernel
ATYinject for 19xx series
audio I left stock
network I left stock
wifi I turned off
Mobo_chips, I used AppleOnboardPCATA and AppleGenericPCATA (turned off all the others)
Turn off all 3rd party apps
Patches used the Lastnetkassmbios
turn off the French keyboard support but turned on the TimeMachineFix and USBPCGen

Booted perfectly first time. Wow. QE, CI, network, sound.... some trouble with sleep (I'll have to look into this).

Thanks Kaly and all the other contributers. I'll try to do my small part.

Khan

Computer: Laptop
Dell Inspirion 5150

CPU 3.06Ghz P4 with HT
RAM: 512MB RAM
Video: GeForce 5200 GO

Installed with iATKOS V 1.0i (10.5.1)
Bootloader: Darwin
ALL Patches
Drivers: VGA: Nvidia: Natit
System: AppleSMBIOS.kext
Network: Broadcom drivers

What Works: Sound, Wifi, Ethernet, DVD Player
What Doesn't work: No Battery meter, DVD-RW drive only reads as Combo Drive (Read DVD/Write CD)


Use the Kalyway 10.5.2 ComboUpdate file from "usual places" to update to the newest version...it takes a LONG time to boot after running the update (over a minute of black screen after the Apple symbol and spinning circle at bottom) but it will load. Remember, you can install SOME updates from the Start Menu, just NO Airport updates and NO Security Updates.....

Current OS X Version: 10.5.2

Desktop

Install Methods summary: Kalyway 10.5.2 (1x dvd burn)

Does EFI and/or the Vanilla kernel work? Yes

Motherboard
Manufacturer: Abit
Motherboard Model: IP35 Off-limits
Chipset: Ip35
BIOS Version: , Revision:
BIOS setup options: SATA set as IDE
Audio: Works out of the box? Yes, but only stereo.
LAN: Works out of the box? Yes
SATA & IDE: Yes, IDE CD-ROM Works after installation only (need sata dvd drive to install)

Processor
Processor Model: Intel Core 2 Duo E8200
Speed: 2,8Ghz
Recognized as what in System Profiler: 2.72 Ghz Unknown

Video Card
What type of card (PCI Express/AGP/Integrated): PCI-Express
NVIDIA
Model: 8800GT
Memory:512 mb
Board Manufacturer: PNY
Patches used: Nvinject 512
QE/CI: Yes
All resolutions available? Yes

ok i tried installing kalyway & iAtkos on my Sony VAIO VGN-FS920 Laptop but they both failed:

is there something else i can use? i've read and read but have gotten nowhere

Specs:
-------------------------
CPU-Z version 1.44.2
-------------------------

Processors Map
------------------------------------------------------------------------------------

Number of processors 1
Number of threads 1

Processor 0
-- Core 0
-- Thread 0


Processors Information
------------------------------------------------------------------------------------

Processor 1 (ID = 0)
Number of cores 1 (max 1)
Number of threads 1 (max 1)
Name Intel Pentium M 740
Codename Dothan
Specification Intel® Pentium® M processor 1.73GHz
Package Socket 479 mPGA (platform ID = 5h)
CPUID 6.D.8
Extended CPUID 6.D
Brand ID 22
Core Stepping C0
Technology 90 nm
Core Speed 798.1 MHz (6.0 x 133.0 MHz)
Rated Bus speed 532.1 MHz
Stock frequency 1733 MHz
Instructions sets MMX, SSE, SSE2
L1 Data cache 32 KBytes, 8-way set associative, 64-byte line size
L1 Instruction cache 32 KBytes, 8-way set associative, 64-byte line size
L2 cache 2048 KBytes, 8-way set associative, 64-byte line size
FID/VID Control yes
FID range 6.0x - 13.0x
max VID 1.356 V
Features XD


Chipset
------------------------------------------------------------------------------

Northbridge Intel i915GMS/i910GML rev. 03
Southbridge Intel 82801FBM (ICH6-M) rev. 03
Memory Type DDR2
Memory Size 1024 MBytes
Channels Dual
Memory Frequency 266.0 MHz (1:2)
CAS# 4.0
RAS# to CAS# 4
RAS# Precharge 4
Cycle Time (tRAS) 12
Memory SPD
------------------------------------------------------------------------------

DIMM #1

General
Memory type DDR2
Module format SO-DIMM
Manufacturer (ID) Infineon (C100000000000000)
Size 512 MBytes
Max bandwidth PC2-4300 (266 MHz)
Part number 64T64020HDL3.7A
Serial number --------
Manufacturing date Week 14/Year 06

Attributes
Number of banks 2
Data width 64 bits
Correction None
Nominal Voltage 1.80 Volts
EPP no
XMP no

Timings table
Frequency (MHz) 200 266 266
CAS# 3.0 4.0 5.0
RAS# to CAS# delay 3 4 4
RAS# Precharge 3 4 4
TRAS 9 12 12
TRC 12 16 16

DIMM #2

General
Memory type DDR2
Module format SO-DIMM
Manufacturer (ID) Nanya Technology (7F7F7F0B00000000)
Size 512 MBytes
Max bandwidth PC2-4300 (266 MHz)
Part number M2N51264TUH8A2F-37
Serial number --------
Manufacturing date Week 05/Year 07

Attributes
Number of banks 2
Data width 64 bits
Correction None
Nominal Voltage 1.80 Volts
EPP no
XMP no

Timings table
Frequency (MHz) 200 266 266
CAS# 3.0 4.0 5.0
RAS# to CAS# delay 3 4 4
RAS# Precharge 3 4 4
TRAS 9 12 12
TRC 12 16 16

Toshiba Satellite A135-S4467
Kalyway leo iso used (10.5.2) successfully working
Processor: Core 2 Duo SS3
945GM chipset
Audio and Lan and firewire works
video: GMA950 max resolution 1280*800 changeable
QE fully working
DVD burner works
5-in-1 card reader doesn't work
Atheros wireless doesnt work
PCMCIA(CardBus) doesn't work
linksys PCMCIA doesnt work
I used the raltek 856 kext to help me with the audio
no battery meter . . .
sleep doesn't work!
headphones jack doesn't work .