i'm stuck in still waiting for root device if i pres f8 and hit -v
and if i try rd=diskXsX i'm stuck in boot loader with icon no enter
can u help me ?
this is my pc specs
CPU Type DualCore AMD Athlon 64 X2, 2400 MHz (12 x 200) 4600+
System Memory 2048 MB (DDR2-800 DDR2 SDRAM)
Video Adapter NVIDIA GeForce 8400 GS (512 MB)
Audio Adapter Realtek ALC888/S/T @ ATI SB600 - High Definition Audio Controller
Disk Drive WDC WD1600AABS-00PRA0 (149 GB, IDE)
Optical Drive TSSTcorp CD/DVDW SH-S182F (DVD+R9:10x, DVD-R9:8x, DVD+RW:18x/8x, DVD-RW:18x/6x, DVD-RAM:12x, DVD-ROM:16x, CD:48x/32x/48x DVD+RW/DVD-RW/DVD-RAM)
Motherboat GA-MA74GM-S2
sory for my bad english..
thanks
Full Version: Hardware Compatibility List - Leopard 10.5.2
Asrock P4i65G
Celeron D 2.93GHZ (SSE3) Prescott
Hitachi 7200rpm sata - removed from laptop...
Nivida Quadro FX 600 AGP card.
Used Kalyway 10.5.2 then used Kalyway 10.5.3 combo update.
9.2.2 modbin kernel
Apple SMBOIS netkas
nvidia 128mb driver
Realtek r1000 driver
Azalia audio driver
Apple Generic PC ATA driver
Drive was formatted as MBR. Installed 10.5.2, the installed 10.5.3 combo update <---follow the read me to the letter!
Ethernet works, Audio works, everything works.
Celeron D 2.93GHZ (SSE3) Prescott
Hitachi 7200rpm sata - removed from laptop...
Nivida Quadro FX 600 AGP card.
Used Kalyway 10.5.2 then used Kalyway 10.5.3 combo update.
9.2.2 modbin kernel
Apple SMBOIS netkas
nvidia 128mb driver
Realtek r1000 driver
Azalia audio driver
Apple Generic PC ATA driver
Drive was formatted as MBR. Installed 10.5.2, the installed 10.5.3 combo update <---follow the read me to the letter!
Ethernet works, Audio works, everything works.
Current OS X Version: 10.5.7
Desktop
Prebuilt? NO
Install Methods summary: (iDeneb10.5.6 ) and iPC upgrade kit 10.5.7 (installed vodoo kernel and seatbelt fix before restarting the system after upgrade kit installation)
Does EFI and/or the Vanilla kernel work?
Used Voodoo 9.5.0 kernel with seatbelt fix.
Motherboard
Manufacturer:ASUS
Motherboard Model:M3A78-EM
Chipset:ATI
BIOS Version: 0907
BIOS setup options: SATA configured as AHCI and Smart thing.. Disabled.
Audio: ACL 97
LAN: Realtek 100SATA & IDE: Works out of the box? If not, list patches.
Processor
Processor Model: AMD Phenom 9850 Black Edition
Speed: 2.5
Recognized as what in System Profiler: AMD Phenom 2.5 Ghz all cores working.
Video Card (not working)
AGP - ATI HD 3200 Integrated
Model:
Memory: OnBoard
Board Manufacturer: ATI
Patches used: Not working
QE/CI: QE enabled with
All resolutions available - Only one 1024x768
IDE worked and could install but after installation still waiting for root device error.
Desktop
Prebuilt? NO
Install Methods summary: (iDeneb10.5.6 ) and iPC upgrade kit 10.5.7 (installed vodoo kernel and seatbelt fix before restarting the system after upgrade kit installation)
Does EFI and/or the Vanilla kernel work?
Used Voodoo 9.5.0 kernel with seatbelt fix.
Motherboard
Manufacturer:ASUS
Motherboard Model:M3A78-EM
Chipset:ATI
BIOS Version: 0907
BIOS setup options: SATA configured as AHCI and Smart thing.. Disabled.
Audio: ACL 97
LAN: Realtek 100SATA & IDE: Works out of the box? If not, list patches.
Processor
Processor Model: AMD Phenom 9850 Black Edition
Speed: 2.5
Recognized as what in System Profiler: AMD Phenom 2.5 Ghz all cores working.
Video Card (not working)
AGP - ATI HD 3200 Integrated
Model:
Memory: OnBoard
Board Manufacturer: ATI
Patches used: Not working
QE/CI: QE enabled with
All resolutions available - Only one 1024x768
IDE worked and could install but after installation still waiting for root device error.
Current OS X Version: 10.5.7
Installed retail 10.5.6, and then updated to 10.5.7 with OS X software update
Desktop
Prebuilt? NO
Install Methods summary: Generic Boot-132 CD, Retail 10.5.6 Leopard installation
http://redirectingat.com/?id=292X457&u...132__Leopard%29
I used followng example (with modification - I had to manually remove nvkush.kext before installing gfx, look for explanation below):
http://www.insanelymac.com/2009/01/install...-boot-132-hack/
(I don't know why but this link is modifiied every time by the forum ?!?! ... use i h a c k i n t o s h istead of insanelymac for upper link)
Does EFI and/or the Vanilla kernel work?
Used Chameleon supplied with Boot-132 torrent download. Vanilla kernel works (since original 10.5.6 Leopard installation DVD was used)
Motherboard
Manufacturer: Gigabyte
Motherboard Model: EP45-DS3L
BIOS Version: F10
BIOS setup options: SATA should be set as "native", "AHCI".
Audio: onboard, works with drivers from http://www.insanelymac.com/forum/index.php?showtopic=128982)
LAN: onboard, Works out of the box
Processor
Processor Model: Intel Core 2 Quad 9400
Speed: 2.66GHz
all cores working
Video Card
Model: PCI Express - Palit nVidia 9800 GT 1GB video memory
Memory: on card, 1 GB
Board Manufacturer: Palit (nVidia)
Patches used: EFI strings with OSx86 Tools
QE/CI: fully working, played games (Prey etc...), used 3D Software - Blender 3D etc.
All resolutions available
Note:
After installation and first boot, no QE/CI, I performed an update to 10.5.7, then after reboot I removed nvkush.kext from hdd->extra->extensions directory (deleted it with finder), and used EFI graphic string (used OSx86 Tools), rebooted, and video acceleration/resolution changing was working as it should
Works great and is stable. I am using it overclocked to 3.2 GHz, which is ~23% faster than quad core Mac Pro (2009) but slower than Mac Pro 8 core. Graphic is faster.
Only issue is shutdown/restart... the computer must be turned off manually (the OS X shuts down completely, but some fans are still working - so you have to turn it manually). This is really minor issue.
Complete hardware list used:
Gigabyte EP45-DS3L
Palit GeForce 9800GT Super+ 1GB
Intel Q9400 Core2 Quad 2.66 GHz
640GB WD6400AAKS SATAII
LC Power Pro-line 914B 550W
DVD-RW LG GH22NS30 22X SATA
DDR2 4GB kit 2X2G PC1066 CL5 Silicon Power
Monitor: LG Flatron W2242T 22" (1680x1050)
(note: DVD/HDD are SATA)
Installed retail 10.5.6, and then updated to 10.5.7 with OS X software update
Desktop
Prebuilt? NO
Install Methods summary: Generic Boot-132 CD, Retail 10.5.6 Leopard installation
http://redirectingat.com/?id=292X457&u...132__Leopard%29
I used followng example (with modification - I had to manually remove nvkush.kext before installing gfx, look for explanation below):
http://www.insanelymac.com/2009/01/install...-boot-132-hack/
(I don't know why but this link is modifiied every time by the forum ?!?! ... use i h a c k i n t o s h istead of insanelymac for upper link)
Does EFI and/or the Vanilla kernel work?
Used Chameleon supplied with Boot-132 torrent download. Vanilla kernel works (since original 10.5.6 Leopard installation DVD was used)
Motherboard
Manufacturer: Gigabyte
Motherboard Model: EP45-DS3L
BIOS Version: F10
BIOS setup options: SATA should be set as "native", "AHCI".
Audio: onboard, works with drivers from http://www.insanelymac.com/forum/index.php?showtopic=128982)
LAN: onboard, Works out of the box
Processor
Processor Model: Intel Core 2 Quad 9400
Speed: 2.66GHz
all cores working
Video Card
Model: PCI Express - Palit nVidia 9800 GT 1GB video memory
Memory: on card, 1 GB
Board Manufacturer: Palit (nVidia)
Patches used: EFI strings with OSx86 Tools
QE/CI: fully working, played games (Prey etc...), used 3D Software - Blender 3D etc.
All resolutions available
Note:
After installation and first boot, no QE/CI, I performed an update to 10.5.7, then after reboot I removed nvkush.kext from hdd->extra->extensions directory (deleted it with finder), and used EFI graphic string (used OSx86 Tools), rebooted, and video acceleration/resolution changing was working as it should
Works great and is stable. I am using it overclocked to 3.2 GHz, which is ~23% faster than quad core Mac Pro (2009) but slower than Mac Pro 8 core. Graphic is faster.
Only issue is shutdown/restart... the computer must be turned off manually (the OS X shuts down completely, but some fans are still working - so you have to turn it manually). This is really minor issue.
Complete hardware list used:
Gigabyte EP45-DS3L
Palit GeForce 9800GT Super+ 1GB
Intel Q9400 Core2 Quad 2.66 GHz
640GB WD6400AAKS SATAII
LC Power Pro-line 914B 550W
DVD-RW LG GH22NS30 22X SATA
DDR2 4GB kit 2X2G PC1066 CL5 Silicon Power
Monitor: LG Flatron W2242T 22" (1680x1050)
(note: DVD/HDD are SATA)
Current OS X Version: 10.5.6
Desktop/Laptop? - Desktop
Prebuilt? - N
Install Methods summary: iPC 10.5.6
Does EFI and/or the Vanilla kernel work? use 9.6.0 Vanilla kernel
Motherboard
Manufacturer: Asrock
Motherboard Model: P43Twins1600
Chipset: Intel P43
BIOS Version: , Revision: unknown
BIOS setup options: default
Audio: use patch from this thread http://aquamac.proboards.com/index.cgi?boa...&thread=663
LAN: ViaRhine driver (was on disk)
SATA & IDE: use JMicronATA kext, but need "idehalt=0" option
Processor
Processor Model: Intel Pentium Dual Core E5400
Speed: 2.7Ghz
Recognized as what in System Profiler: unkonwn
Video Card
What type of card : PCI Express
NVIDIA/ATI/Intel? NVidia
Model: 8600GT
Memory: 512Mb
Board Manufacturer: Gainward
Patches used: NVInject 0.2.1
QE/CI: not tested yet
All resolutions available? not tested yet
PCI LAN card
Interface: PCI/PCI-e? PCI
Manufacturer: D-Link
Model: DFE-520TX
Works? Y
Patches: PCGen kext (was on disk)
Desktop/Laptop? - Desktop
Prebuilt? - N
Install Methods summary: iPC 10.5.6
Does EFI and/or the Vanilla kernel work? use 9.6.0 Vanilla kernel
Motherboard
Manufacturer: Asrock
Motherboard Model: P43Twins1600
Chipset: Intel P43
BIOS Version: , Revision: unknown
BIOS setup options: default
Audio: use patch from this thread http://aquamac.proboards.com/index.cgi?boa...&thread=663
LAN: ViaRhine driver (was on disk)
SATA & IDE: use JMicronATA kext, but need "idehalt=0" option
Processor
Processor Model: Intel Pentium Dual Core E5400
Speed: 2.7Ghz
Recognized as what in System Profiler: unkonwn
Video Card
What type of card : PCI Express
NVIDIA/ATI/Intel? NVidia
Model: 8600GT
Memory: 512Mb
Board Manufacturer: Gainward
Patches used: NVInject 0.2.1
QE/CI: not tested yet
All resolutions available? not tested yet
PCI LAN card
Interface: PCI/PCI-e? PCI
Manufacturer: D-Link
Model: DFE-520TX
Works? Y
Patches: PCGen kext (was on disk)
Current OS X Version: 10.5.7
Desktop/Laptop? - Desktop
Prebuilt? - N
Install Methods summary: iAtkos 10.5.7
Does EFI and/or the Vanilla kernel work? used 9.5.0 Voodoo kernel
Motherboard
Manufacturer: J & W
Motherboard Model: 790GX-Extreme
Chipset: AMD 790GX
BIOS Version: , Revision: unknown
BIOS setup options: default (installed at AHCI)
Audio: ALC888 - choosed Azalia cause Voodoo sounded VERY bad!!! Now its nice
LAN: Marvell Yukon 88E8056
SATA & IDE: choosed VIA and ATI
Processor
Processor Model: AMD Phenom 9950
Speed: 2.6Ghz
Recognized as what in System Profiler: 9950
Video Card
What type of card : PCI Express
NVIDIA/ATI/Intel? NVidia
Model: 280GTX
Memory: 1024Mb
Board Manufacturer: XFX
Patches used: had to choose every patch with a 2xxGTX in it
QE/CI: not tested yet
All resolutions available? No! 1024x768 doesnt, had to erase the Windowserver!
Desktop/Laptop? - Desktop
Prebuilt? - N
Install Methods summary: iAtkos 10.5.7
Does EFI and/or the Vanilla kernel work? used 9.5.0 Voodoo kernel
Motherboard
Manufacturer: J & W
Motherboard Model: 790GX-Extreme
Chipset: AMD 790GX
BIOS Version: , Revision: unknown
BIOS setup options: default (installed at AHCI)
Audio: ALC888 - choosed Azalia cause Voodoo sounded VERY bad!!! Now its nice
LAN: Marvell Yukon 88E8056
SATA & IDE: choosed VIA and ATI
Processor
Processor Model: AMD Phenom 9950
Speed: 2.6Ghz
Recognized as what in System Profiler: 9950
Video Card
What type of card : PCI Express
NVIDIA/ATI/Intel? NVidia
Model: 280GTX
Memory: 1024Mb
Board Manufacturer: XFX
Patches used: had to choose every patch with a 2xxGTX in it
QE/CI: not tested yet
All resolutions available? No! 1024x768 doesnt, had to erase the Windowserver!
Current OS X Version: 10.5.7
Desktop
Prebuilt? No
Install Methods summary:
Bios refreshed using a bios modified by Juzzy, he rocks!!!
Under winXP, use Leopard hd install helper v0.3 (version chinese) to copy the iso image of IATKOS v7(Kernel 9.7.0 Voodoo) to a 5G partition(neither first nor last partition) preformatted to fat32 (quick format in XP) on a WD 500G hard disk; then boot to this false DVD of leopard.
No need of Cardbus patch, nor usb patch.
HAL patch necessary in order to stop and restart normally
Motherboard: ASUS P5Q3 deluxe WIFI-AP@n
Manufacturer: ASUS
Chipset:
BIOS Version: 2004-BIOS-Asus_P5Q_3_Deluxe_WiFi-AP_for_MAC_OS_X_VISTA_Slic_&_all_OS__incl._by_Juzzi..ROM
BIOS setup options: SATA set as AHCI mode; nothing else
Audio: Works out of the box with the default driver.
LAN: not tested but probably works
SATA & IDE: Works out of the box
WIFI@n: flawless with driver in the IATKOS for Ralink RT 2870
Processor Model:Intel q9550
Speed:2,83GHz
Recognized as what in System Profiler: as it is.
Video Card : NVidia 8600gt 256Mb
PCI Express
QE/CI: both ok.
All resolutions available: no, but 1920*1200*32 ok.
Wireless/Wired Card: integrated on motherboard.
Interface: usb
Standard (Wireless only): 801n
Manufacturer: ralink
Model: 2870
Works perfectly
Patches: ralink rt 2870
Sound Card : integrated on motherboard
Works with VoodooHDA
Other Accessories (USB/FIREWIRE)
Webcam : works OOB, integrated in ASUS VK266H screen.
Firewire : limited 400M (no need to be disabled before installation)
USB: all right.
z.pengju@gmail.com
Desktop
Prebuilt? No
Install Methods summary:
Bios refreshed using a bios modified by Juzzy, he rocks!!!
Under winXP, use Leopard hd install helper v0.3 (version chinese) to copy the iso image of IATKOS v7(Kernel 9.7.0 Voodoo) to a 5G partition(neither first nor last partition) preformatted to fat32 (quick format in XP) on a WD 500G hard disk; then boot to this false DVD of leopard.
No need of Cardbus patch, nor usb patch.
HAL patch necessary in order to stop and restart normally
Motherboard: ASUS P5Q3 deluxe WIFI-AP@n
Manufacturer: ASUS
Chipset:
BIOS Version: 2004-BIOS-Asus_P5Q_3_Deluxe_WiFi-AP_for_MAC_OS_X_VISTA_Slic_&_all_OS__incl._by_Juzzi..ROM
BIOS setup options: SATA set as AHCI mode; nothing else
Audio: Works out of the box with the default driver.
LAN: not tested but probably works
SATA & IDE: Works out of the box
WIFI@n: flawless with driver in the IATKOS for Ralink RT 2870
Processor Model:Intel q9550
Speed:2,83GHz
Recognized as what in System Profiler: as it is.
Video Card : NVidia 8600gt 256Mb
PCI Express
QE/CI: both ok.
All resolutions available: no, but 1920*1200*32 ok.
Wireless/Wired Card: integrated on motherboard.
Interface: usb
Standard (Wireless only): 801n
Manufacturer: ralink
Model: 2870
Works perfectly
Patches: ralink rt 2870
Sound Card : integrated on motherboard
Works with VoodooHDA
Other Accessories (USB/FIREWIRE)
Webcam : works OOB, integrated in ASUS VK266H screen.
Firewire : limited 400M (no need to be disabled before installation)
USB: all right.
z.pengju@gmail.com
Current OS X Version: 10.5.7
Desktop
Prebuilt? NO
Install Methods summary: iAtkos v7 10.5.7, Bootloader Chameleon v2
Does EFI and/or the Vanilla kernel work? PCEFI v9, Vanilla Kernel not tested, using standard kernel
Motherboard
Manufacturer: GIGABYTE
Motherboard Model: GA-EP45-DS3
Chipset: Intel P45
BIOS Version: F9
BIOS setup options: no changes on BIOS, no AHCI, Kexts during installation iAtkos DVD: x86 Patches->SMBIOS drivers->SMBIOS Enablers: SMBIOS-EFI
Audio: YES, using preselected Voodoo HDA Driver - Onboard, Headphones & SPDIF (with video card - HDMI) works!!!
LAN: 2 x Ethernet works out-of-the-box
SATA & IDE: Works, Kexts during installation iAtkos DVD: Drivers->System->SATA/IDE: Intel SATA/IDE, JMicron SATA/IDE, VIA SATA/IDE, ATI SATA/IDE & Generic IDE
Other Kexts you have to choose: x86 Patches: OHR (OpenHaltRestart), x86 ACPI
Processor
Processor Model: Intel Core 2 Duo E8500
Speed: 3.61 GHz
Recognized as what in System Profiler: E8500 3.61 GHz
Video Card
What type of card (PCI Express/AGP/Integrated): PCI-E
NVIDIA/ATI/Intel? NVIDIA
Model: NX8500GT
Memory: 256MB
Board Manufacturer: MSI
Patches used: only NVEnabler
QE/CI: Works
All resolutions available? YES
HDMI with SPDIF through video card works!
Other PCI/PCI-e Components
Wireless Card
Interface: PCI
Standard (Wireless only): 802.11g
Manufacturer: ASUS
Model: WL-138 V2
Works? YES, out-of-the-box, recognized as Airport Card
Patches: NO PATCH
Other Accessories
Type: Motherboard integrated Firewire
Manufacturer: Gigabyte
Works? YES
Work out of the box
Everthing works fine!!! No problems at all!
dantespeak
Desktop
Prebuilt? NO
Install Methods summary: iAtkos v7 10.5.7, Bootloader Chameleon v2
Does EFI and/or the Vanilla kernel work? PCEFI v9, Vanilla Kernel not tested, using standard kernel
Motherboard
Manufacturer: GIGABYTE
Motherboard Model: GA-EP45-DS3
Chipset: Intel P45
BIOS Version: F9
BIOS setup options: no changes on BIOS, no AHCI, Kexts during installation iAtkos DVD: x86 Patches->SMBIOS drivers->SMBIOS Enablers: SMBIOS-EFI
Audio: YES, using preselected Voodoo HDA Driver - Onboard, Headphones & SPDIF (with video card - HDMI) works!!!
LAN: 2 x Ethernet works out-of-the-box
SATA & IDE: Works, Kexts during installation iAtkos DVD: Drivers->System->SATA/IDE: Intel SATA/IDE, JMicron SATA/IDE, VIA SATA/IDE, ATI SATA/IDE & Generic IDE
Other Kexts you have to choose: x86 Patches: OHR (OpenHaltRestart), x86 ACPI
Processor
Processor Model: Intel Core 2 Duo E8500
Speed: 3.61 GHz
Recognized as what in System Profiler: E8500 3.61 GHz
Video Card
What type of card (PCI Express/AGP/Integrated): PCI-E
NVIDIA/ATI/Intel? NVIDIA
Model: NX8500GT
Memory: 256MB
Board Manufacturer: MSI
Patches used: only NVEnabler
QE/CI: Works
All resolutions available? YES
HDMI with SPDIF through video card works!
Other PCI/PCI-e Components
Wireless Card
Interface: PCI
Standard (Wireless only): 802.11g
Manufacturer: ASUS
Model: WL-138 V2
Works? YES, out-of-the-box, recognized as Airport Card
Patches: NO PATCH
Other Accessories
Type: Motherboard integrated Firewire
Manufacturer: Gigabyte
Works? YES
Work out of the box
Everthing works fine!!! No problems at all!
dantespeak
Current OS X Version: 10.5.8
Desktop/Laptop?
Prebuilt? Y
Manufacturer: Dell
Model: Inspiron 531
Install Methods summary: Retail with boot132
Does EFI and/or the Vanilla kernel work? unknown
(in following sections, if you don't know or not sure, write "unknown")
Motherboard M2N61-AX
Manufacturer: Asus
Chipset: nVidia MCP61
BIOS Version: , Revision: 1.13
BIOS setup options: unknown
Audio: kext can be found on insanleymac
LAN: kext can be found on insanleymac
SATA & IDE: sata works i think
Processor AMD 64 X2 5600+
Processor Model: Windsor
Speed: 2.80GHz
Recognized as what in System Profiler:
Model Name: Mac Pro
Model Identifier: MacPro3,1
Processor Name: Intel Core Duo
Processor Speed: 2.8 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per core): 1 MB
Memory: 4 GB
Video Card
What type of card: PCI Express
NVIDIA
Model: Geforce 8600GT
Memory: 256MB
Board Manufacturer: generic
All resolutions available? yes
Desktop/Laptop?
Prebuilt? Y
Manufacturer: Dell
Model: Inspiron 531
Install Methods summary: Retail with boot132
Does EFI and/or the Vanilla kernel work? unknown
(in following sections, if you don't know or not sure, write "unknown")
Motherboard M2N61-AX
Manufacturer: Asus
Chipset: nVidia MCP61
BIOS Version: , Revision: 1.13
BIOS setup options: unknown
Audio: kext can be found on insanleymac
LAN: kext can be found on insanleymac
SATA & IDE: sata works i think
Processor AMD 64 X2 5600+
Processor Model: Windsor
Speed: 2.80GHz
Recognized as what in System Profiler:
Model Name: Mac Pro
Model Identifier: MacPro3,1
Processor Name: Intel Core Duo
Processor Speed: 2.8 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per core): 1 MB
Memory: 4 GB
Video Card
What type of card: PCI Express
NVIDIA
Model: Geforce 8600GT
Memory: 256MB
Board Manufacturer: generic
All resolutions available? yes
EVGA 9500 GT 1GB Graphics Card
NVAP: 04000000000003000c0000000000000700000000
10.5.7
NVAP: 04000000000003000c0000000000000700000000
10.5.7
Current OS X Version: 10.5.8
Desktop (detected as MacPro3,1)
Prebuilt? N - Selfbuilt
Install Methods summary: iDeneb v1.6 Lite
Does EFI and/or the Vanilla kernel work? partitioned as MBR, Chameleon v2 + Voodoo 9.5.0 Kernel
Motherboard
Manufacturer: Asus
Motherboard Model: PQ5C
Chipset: P45
BIOS Version: 1406 (BIOS Flash)
BIOS setup options: SATA have to be set as "AHCI"; Marvell IDE set as "disabled"
Audio: ALC1200_1057_SLIM (contains AppleHDA.kext + HDAEnabler.kext)
LAN: AttansicL1eEthernet.kext (important: NOT AttansicL1Ethernet.kext!!!!)
SATA & IDE: OOTB
Processor
Processor Model: Intel Core 2 Duo E8400
Speed: 3GHz
Recognized as what in System Profiler: Intel Core 2 Duo E8400@3GHz
Video Card
What type of card: PCI Express
NVIDIA
Model: Geforce 9800GT
Memory: 1024 MB DDR3
Board Manufacturer: Point of View
Patches used: NVdarwin 1024
QE/CI: yes
All resolutions available? yes
Other Accessories
Type: Motherboard integrated Firewire
Manufacturer: LSI
Works? YES
OOTB
also installed:
SMBIOS 1333 for DDR3 RAM
Chameleon v2
VoodooPS2Controller
AppleHDAFix
MouseLagFix (for USB Mouse Lag)
AHCI SATA/IDE (for Chipset)
Seatbelt Fix (important)
Restart working
Shut down working
Sleep working (with VoodooUSBEHCI)
Desktop (detected as MacPro3,1)
Prebuilt? N - Selfbuilt
Install Methods summary: iDeneb v1.6 Lite
Does EFI and/or the Vanilla kernel work? partitioned as MBR, Chameleon v2 + Voodoo 9.5.0 Kernel
Motherboard
Manufacturer: Asus
Motherboard Model: PQ5C
Chipset: P45
BIOS Version: 1406 (BIOS Flash)
BIOS setup options: SATA have to be set as "AHCI"; Marvell IDE set as "disabled"
Audio: ALC1200_1057_SLIM (contains AppleHDA.kext + HDAEnabler.kext)
LAN: AttansicL1eEthernet.kext (important: NOT AttansicL1Ethernet.kext!!!!)
SATA & IDE: OOTB
Processor
Processor Model: Intel Core 2 Duo E8400
Speed: 3GHz
Recognized as what in System Profiler: Intel Core 2 Duo E8400@3GHz
Video Card
What type of card: PCI Express
NVIDIA
Model: Geforce 9800GT
Memory: 1024 MB DDR3
Board Manufacturer: Point of View
Patches used: NVdarwin 1024
QE/CI: yes
All resolutions available? yes
Other Accessories
Type: Motherboard integrated Firewire
Manufacturer: LSI
Works? YES
OOTB
also installed:
SMBIOS 1333 for DDR3 RAM
Chameleon v2
VoodooPS2Controller
AppleHDAFix
MouseLagFix (for USB Mouse Lag)
AHCI SATA/IDE (for Chipset)
Seatbelt Fix (important)
Restart working
Shut down working
Sleep working (with VoodooUSBEHCI)
Current OS X Version: 10.5.2
Desktop/Laptop?
Prebuilt? Yes
Install Methods summary: Boot-132 (w/ DsMos.kext) Retail Leopard. Chameleon 2 RC2
Does EFI and/or the Vanilla kernel work? Unknown.
(in following sections, if you don't know or not sure, write "unknown")
Motherboard
Manufacturer:Asus
Motherboard Model:P5Q
Chipset:P45
BIOS Version: , Revision:http://www.insanelymac.com/forum/index.php?act=attach&type=post&id=51200
BIOS setup options: AHCI turned on
Audio: Yes
LAN: No, patch with: AttansicL1eEthernet.kext
SATA & IDE: SATA - yes / IDE - unknown
Processor
Processor Model:Intel Core 2 Duo 8200
Speed:2.67mhZ
Recognized as what in System Profiler:Mac Pro
Video Card (if you have integrated and PCI/AGP, use this template twice)
What type of card: PCI 2.0 Express
nVidia
Model:XFX 9600 GSO
Memory:756mb DDR2
Board Manufacturer:XFX
Patches used:http://rapidshare.com/files/156247292/NVIDIA_9000_Series_Driver_v2.zip.html
QE/CI:Both enabled
All resolutions available? yes
Desktop/Laptop?
Prebuilt? Yes
Install Methods summary: Boot-132 (w/ DsMos.kext) Retail Leopard. Chameleon 2 RC2
Does EFI and/or the Vanilla kernel work? Unknown.
(in following sections, if you don't know or not sure, write "unknown")
Motherboard
Manufacturer:Asus
Motherboard Model:P5Q
Chipset:P45
BIOS Version: , Revision:http://www.insanelymac.com/forum/index.php?act=attach&type=post&id=51200
BIOS setup options: AHCI turned on
Audio: Yes
LAN: No, patch with: AttansicL1eEthernet.kext
SATA & IDE: SATA - yes / IDE - unknown
Processor
Processor Model:Intel Core 2 Duo 8200
Speed:2.67mhZ
Recognized as what in System Profiler:Mac Pro
Video Card (if you have integrated and PCI/AGP, use this template twice)
What type of card: PCI 2.0 Express
nVidia
Model:XFX 9600 GSO
Memory:756mb DDR2
Board Manufacturer:XFX
Patches used:http://rapidshare.com/files/156247292/NVIDIA_9000_Series_Driver_v2.zip.html
QE/CI:Both enabled
All resolutions available? yes
Current OS X Version: 10.6
Desktop (detected as MacPro8,1)
Install Methods summary: SnowLeopard OS X 10.6
Does EFI and/or the Vanilla kernel work? Chameleon v2 RC1 r431
Motherboard
Manufacturer: Supermicro
Motherboard Model: X7DAE
Chipset: Intel 5000X (GreenCreek) chipset
BIOS Version: R2.1a
BIOS setup options: SATA have to be set as "AHCI"; RAID as "disabled"
Audio: Terratec AUREON 5.1 USB
LAN: Intel (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller
Processor
Processor Model: 2x Xeon 5160
Speed: 3GHz
Video Card
What type of card: PCI Express
NVIDIA
Model: Geforce 8800 GTX
Memory: 768 MB DDR3
Board Manufacturer: XFX
Patches used: efiSTRING
QE/CI: yes
All resolutions available? yes
Other Accessories
Type: Firewire 800
Manufacturer: LSI
Works? YES
also installed:
fakesmc.kext
IOAHCIBlockStorageInjector.kext
LegacyHDA.kext
NullCPUPowerManagement.kext
OpenHaltRestart.kext
PlatformUUID.kext
SleepEnabler.kext
Restart working
Shut down working
Sleep not working
Desktop (detected as MacPro8,1)
Install Methods summary: SnowLeopard OS X 10.6
Does EFI and/or the Vanilla kernel work? Chameleon v2 RC1 r431
Motherboard
Manufacturer: Supermicro
Motherboard Model: X7DAE
Chipset: Intel 5000X (GreenCreek) chipset
BIOS Version: R2.1a
BIOS setup options: SATA have to be set as "AHCI"; RAID as "disabled"
Audio: Terratec AUREON 5.1 USB
LAN: Intel (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller
Processor
Processor Model: 2x Xeon 5160
Speed: 3GHz
Video Card
What type of card: PCI Express
NVIDIA
Model: Geforce 8800 GTX
Memory: 768 MB DDR3
Board Manufacturer: XFX
Patches used: efiSTRING
QE/CI: yes
All resolutions available? yes
Other Accessories
Type: Firewire 800
Manufacturer: LSI
Works? YES
also installed:
fakesmc.kext
IOAHCIBlockStorageInjector.kext
LegacyHDA.kext
NullCPUPowerManagement.kext
OpenHaltRestart.kext
PlatformUUID.kext
SleepEnabler.kext
Restart working
Shut down working
Sleep not working
Desktop or laptop? Laptop
I may have Leopard in mi Laptop?
This is a complete description of my Laptop...
Processor: Mobile DualCore Intel Core 2 Duo T7500, 1333 MHz (12 x 111)
Model: TOSHIBA TECRA A9
Chipset Mainboard: Intel Crestline-GM GM965
RAM: 4086 MB (DDR2-667 DDR2 SDRAM)
Graphic Card: Mobile Intel® 965 Express Chipset Family (384 MB)
Accelerator 3D: Intel GMA X3100
Sound Card: Realtek ALC262 @ Intel 82801HBM ICH8M - High Definition Audio Controller
Driver IDE: ATA serie Intel® ICH8M 3 ports - 2828
Driver IDE: Texas Instruments PCIxx12 Integrated FlashMedia Controller
HDD: Hitachi HTS541616J9SA00 ATA Device (160 GB, 5400 RPM, SATA)
CD/DVD-RW: TEAC DV-W28ECT ATA Device (DVD+RW:8x/4x, DVD-RW:8x/4x, DVD-ROM:8x, CD:24x/10x/24x DVD+RW/DVD-RW)
Keyboard: Keyboard Device HID
Teclado: Keyboard PS/2 standart
Mouse: PS/2
Lan(Red) Card: Gigabit Intel® 82566MC
Intel® Wireless WiFi Link 4965AGN
and Bluetooth
One Question...
which is the correct setting in customize part of during installation?
please help me!! Bye
I may have Leopard in mi Laptop?
This is a complete description of my Laptop...
Processor: Mobile DualCore Intel Core 2 Duo T7500, 1333 MHz (12 x 111)
Model: TOSHIBA TECRA A9
Chipset Mainboard: Intel Crestline-GM GM965
RAM: 4086 MB (DDR2-667 DDR2 SDRAM)
Graphic Card: Mobile Intel® 965 Express Chipset Family (384 MB)
Accelerator 3D: Intel GMA X3100
Sound Card: Realtek ALC262 @ Intel 82801HBM ICH8M - High Definition Audio Controller
Driver IDE: ATA serie Intel® ICH8M 3 ports - 2828
Driver IDE: Texas Instruments PCIxx12 Integrated FlashMedia Controller
HDD: Hitachi HTS541616J9SA00 ATA Device (160 GB, 5400 RPM, SATA)
CD/DVD-RW: TEAC DV-W28ECT ATA Device (DVD+RW:8x/4x, DVD-RW:8x/4x, DVD-ROM:8x, CD:24x/10x/24x DVD+RW/DVD-RW)
Keyboard: Keyboard Device HID
Teclado: Keyboard PS/2 standart
Mouse: PS/2
Lan(Red) Card: Gigabit Intel® 82566MC
Intel® Wireless WiFi Link 4965AGN
and Bluetooth
One Question...
which is the correct setting in customize part of during installation?
please help me!! Bye
[/list]Current OS X Version: 10.5.2
/Laptop : TOSHIBA A200-1DT
Prebuilt? (Yes)
(If prebuilt then add following information, otherwise fill the Motherboard:)
Manufacturer: TOSHIBA
Model: Satellite A200-1DT
Install Methods summary: KALYWAY 1052
Does EFI and/or the Vanilla kernel work? Yes
(in following sections, if you don't know or not sure, write "unknown")
Motherboard
Manufacturer: Unknown
Motherboard Model: Unknown
Chipset: Intel Core2 1,7
BIOS Version: 1, Revision: 3
BIOS setup options: Originals
Audio: Works out of the box.
LAN: Works out of the box.
SATA & IDE: Works out of the box.
Processor
Processor Model: Intel Core Duo
Speed:1,7
Recognized as what in System Profiler: Yes
Video Card (if you have integrated and PCI/AGP, use this template twice)
What type of card (PCI Express/AGP/Integrated):
Intel
Model: GMA 945
Memory: Shared
Board Manufacturer: Intel
Patches used: Intel GMA 950 in Kalyway options of install
QE/CI: Unknown
All resolutions available? yes
Other PCI/PCI-e Components (USB are listed in Other Accessories below)
Wireless/Wired Card (for PCI/PCI-e cards only)
Interface: PCI/PCI-e?
Standard (Wireless only): (example: 801n)
Manufacturer:Atheros Communications
Model: AR242X
Works? Yes
Patches: none auto from Kalyway install
Sound Card (this is for PCI/PCI-e cards only - integrated on motherboard is in motherboard section)
Interface: PCI/PCI-e?
Manufacturer: Intel
Model: 82801G ICH7
Works? yes
Patches: Auto from Kalyway
Other Accessories (USB/FIREWIRE)
Type (Webcam, External Sound Card, USB bluetooth dongle, etc.):
Name: Firewire
Manufacturer: Texas Intrument
Works? no
Patches/Work out of the box? no
Important Note:
[/quote]
/Laptop : TOSHIBA A200-1DT
Prebuilt? (Yes)
(If prebuilt then add following information, otherwise fill the Motherboard:)
Manufacturer: TOSHIBA
Model: Satellite A200-1DT
Install Methods summary: KALYWAY 1052
Does EFI and/or the Vanilla kernel work? Yes
(in following sections, if you don't know or not sure, write "unknown")
Motherboard
Manufacturer: Unknown
Motherboard Model: Unknown
Chipset: Intel Core2 1,7
BIOS Version: 1, Revision: 3
BIOS setup options: Originals
Audio: Works out of the box.
LAN: Works out of the box.
SATA & IDE: Works out of the box.
Processor
Processor Model: Intel Core Duo
Speed:1,7
Recognized as what in System Profiler: Yes
Video Card (if you have integrated and PCI/AGP, use this template twice)
What type of card (PCI Express/AGP/Integrated):
Intel
Model: GMA 945
Memory: Shared
Board Manufacturer: Intel
Patches used: Intel GMA 950 in Kalyway options of install
QE/CI: Unknown
All resolutions available? yes
Other PCI/PCI-e Components (USB are listed in Other Accessories below)
Wireless/Wired Card (for PCI/PCI-e cards only)
Interface: PCI/PCI-e?
Standard (Wireless only): (example: 801n)
Manufacturer:Atheros Communications
Model: AR242X
Works? Yes
Patches: none auto from Kalyway install
Sound Card (this is for PCI/PCI-e cards only - integrated on motherboard is in motherboard section)
Interface: PCI/PCI-e?
Manufacturer: Intel
Model: 82801G ICH7
Works? yes
Patches: Auto from Kalyway
Other Accessories (USB/FIREWIRE)
Type (Webcam, External Sound Card, USB bluetooth dongle, etc.):
Name: Firewire
Manufacturer: Texas Intrument
Works? no
Patches/Work out of the box? no
If you have any questions regarding the Leopard HCL, then please contact the Wiki Team.
~Posts which have been used to update the Leopard HCL shall be deleted to help the members updating the HCL better manage the task~
.~Posts which have been used to update the Leopard HCL shall be deleted to help the members updating the HCL better manage the task~
Important Note:
The Wiki is now open to the publicso if members wish they may go there directly and enter their details. Please remember to fill in the Computer/Laptop sections if your system is a prebuilt one as well as the Components section.
Also if you've already inputted your details in the Wiki then you should not also post them in this thread! It will only be deleted and causes the process of updating the wiki from here to slow down.
[/quote]
Current Version: 10.5.8
Desktop/Laptop? Laptop
Prebuilt? Yes
Manufacturer: HP
Model: Pavilion dv5t CTO-1000
Status: Shutdown/Restart/Deep sleep working, sound doesn't work after wake up
System Profiler recognized as MacBookPro4,1
Install Methods summary:
- iDeneb v.1.5.1 10.5.7 + iDeneb 10.5.8 Delta Upgrade Kit
Does EFI and/or the Vanilla kernel work? Yes
Motherboard
Manufacturer: HP
Motherboard Model: unknown
Chipset: Intel Cantiga PM45
BIOS Version: F.21A (Insyde) , Revision: 08/20/09
BIOS setup options: Default
Audio: IDT 92HD71B7
LAN: Realtek 8168C
Wifi: Broadcom 4312
SATA & IDE: SATA 250GB
RAM: DDR2 4G 800MHz
Processor
Processor Model: Intel Core 2 Duo P8400
Speed: 2.26GHz
Recognized as what in System Profiler: 2.26GHz Intel Core 2 Duo
Video Card (if you have integrated and PCI/AGP, use this template twice)
What type of card (PCI Express/AGP/Integrated): PCI Express 2.0 x16
NVIDIA/ATI/Intel? NVIDIA
Model: 9600M GT
Memory: 512MB
Board Manufacturer : NVIDIA
QE/CI: Working
All resolutions available? Yes
Other Accessories (USB/FIREWIRE)
Type (Webcam, External Sound Card, USB bluetooth dongle, etc.): Webcam
Name: HP Webcam
Manufacturer: HP
Works? Yes
Patches/Work out of the box? OOB
Type (Webcam, External Sound Card, USB bluetooth dongle, etc.): SD Reader
Name: JMB38X Card Reader
Manufacturer: JMicron
Works? Yes
Patches/Work out of the box? OOB
Patches
- 10.5.8 USB Patched driver by slice (http://www.projectosx.com/forum/index.php?showtopic=337)
- SleepEnabler by pista7 (http://www.insanelymac.com/forum/index.php?showtopic=178468&st=100&p=1224830&#entry1224830)
- VoodooUSBEHCI by superhai (http://www.superhai.com/darwin.htm)
- Chameleon RC3 + PC_EFI v10.3 with customized boot.plist
- Some self-modified scripts and kexts (AppleSystemInfo.strings, SMBIOS.plist, Vanilla AppleSMBIOS.kext)
- DSDT Patched with -newHPET
Desktop/Laptop? Laptop
Prebuilt? Yes
Manufacturer: HP
Model: Pavilion dv5t CTO-1000
Status: Shutdown/Restart/Deep sleep working, sound doesn't work after wake up
System Profiler recognized as MacBookPro4,1
Install Methods summary:
- iDeneb v.1.5.1 10.5.7 + iDeneb 10.5.8 Delta Upgrade Kit
Does EFI and/or the Vanilla kernel work? Yes
Motherboard
Manufacturer: HP
Motherboard Model: unknown
Chipset: Intel Cantiga PM45
BIOS Version: F.21A (Insyde) , Revision: 08/20/09
BIOS setup options: Default
Audio: IDT 92HD71B7
LAN: Realtek 8168C
Wifi: Broadcom 4312
SATA & IDE: SATA 250GB
RAM: DDR2 4G 800MHz
Processor
Processor Model: Intel Core 2 Duo P8400
Speed: 2.26GHz
Recognized as what in System Profiler: 2.26GHz Intel Core 2 Duo
Video Card (if you have integrated and PCI/AGP, use this template twice)
What type of card (PCI Express/AGP/Integrated): PCI Express 2.0 x16
NVIDIA/ATI/Intel? NVIDIA
Model: 9600M GT
Memory: 512MB
Board Manufacturer : NVIDIA
QE/CI: Working
All resolutions available? Yes
Other Accessories (USB/FIREWIRE)
Type (Webcam, External Sound Card, USB bluetooth dongle, etc.): Webcam
Name: HP Webcam
Manufacturer: HP
Works? Yes
Patches/Work out of the box? OOB
Type (Webcam, External Sound Card, USB bluetooth dongle, etc.): SD Reader
Name: JMB38X Card Reader
Manufacturer: JMicron
Works? Yes
Patches/Work out of the box? OOB
Patches
- 10.5.8 USB Patched driver by slice (http://www.projectosx.com/forum/index.php?showtopic=337)
- SleepEnabler by pista7 (http://www.insanelymac.com/forum/index.php?showtopic=178468&st=100&p=1224830&#entry1224830)
- VoodooUSBEHCI by superhai (http://www.superhai.com/darwin.htm)
- Chameleon RC3 + PC_EFI v10.3 with customized boot.plist
- Some self-modified scripts and kexts (AppleSystemInfo.strings, SMBIOS.plist, Vanilla AppleSMBIOS.kext)
- DSDT Patched with -newHPET
[quote name='JokersBestFriend' date='Apr 23 2008, 08:56 PM' post='721271']
Notebook Toshiba Satellite P20-962 finaly works fast (but only SSE2 & VESA)[b]
Hi, I have the same laptop - I installed - iAKtos v1 and used the settings you suggested. When I try to boot, I just reach a blank screen. The Disk has 1 partition. The partition is MBR and is active. Do i need to install the Kalway combo update before it will boot (if so how?) or do I need to change something in the BIOS?
Many thanks
Notebook Toshiba Satellite P20-962 finaly works fast (but only SSE2 & VESA)[b]
Hi, I have the same laptop - I installed - iAKtos v1 and used the settings you suggested. When I try to boot, I just reach a blank screen. The Disk has 1 partition. The partition is MBR and is active. Do i need to install the Kalway combo update before it will boot (if so how?) or do I need to change something in the BIOS?
Many thanks
Current OS X Version: 10.5.6
Install Methods Ideneb 1.4
fix at the installation:
chipset: marvell
kernel: sleep
video: driver hd 38xx series
audio: apple azalia (not work, but i install later voodoo HDA kext and work!!!)
lan: marvell88E8056
ICHx Fixed
Motherboard
Manufacturer: ASUS
Model: P5E3
BIOS setup options: AHCI enabled - Intel SpeedStep disable - Enanched Halt State enabled
Chipset Audio: Realtek ALC 883 (not work with ALC 883, but WORK with voodoo.HDA.kext)
LAN: Marvell
Processor
Intel Q9450
Video Card
Type: PCI express
Model: Sapphire HD 3870 512MB
Other Components
Memory: 2 GB DDR3 1333MHz (full working)
Keyboard: Trust (working)
mouse: trust usb (work)
Sleep (work)
Shutdown (work)
Reboot (work)
Install Methods Ideneb 1.4
fix at the installation:
chipset: marvell
kernel: sleep
video: driver hd 38xx series
audio: apple azalia (not work, but i install later voodoo HDA kext and work!!!)
lan: marvell88E8056
ICHx Fixed
Motherboard
Manufacturer: ASUS
Model: P5E3
BIOS setup options: AHCI enabled - Intel SpeedStep disable - Enanched Halt State enabled
Chipset Audio: Realtek ALC 883 (not work with ALC 883, but WORK with voodoo.HDA.kext)
LAN: Marvell
Processor
Intel Q9450
Video Card
Type: PCI express
Model: Sapphire HD 3870 512MB
Other Components
Memory: 2 GB DDR3 1333MHz (full working)
Keyboard: Trust (working)
mouse: trust usb (work)
Sleep (work)
Shutdown (work)
Reboot (work)
Snow Leopard 10.6 / 10.6.1 on DELL XPS 1530m DUAL BOOT with Windows Seven:
(added Extensios kext)
Requeriments:
- DELL XPS 1530m LAPTOP
- DELL 1390 Wifi card (optional)
- Snow Leopard Retail
- Chamaleon RC2
- Windows 7 (or other version)
- Kext Utility
- OSX86 Tools
- SnowLeopard Kext 64bit prepared: AppleACPIBatterManager.kext, AppleACPIPS2Nub.kext,ApplePS2Controller.kext,fakesmc.kext,Natit.kext,NullCPUPowe
rManagement.kext, PlatformUUID.kext,VoodooHDA.kext
- External HardDrive (USB)
My DELL XPS 1530m
Intel Core2Duo 8100 (2,1Ghz)
Motherboard Dell
Audio: Sigmatel 9228 (9205 in Bios)
Video: nVidia 8600m 256mb (recognized like 8400 with Natit.kext in /Extra) QE/CI fully working
Wireless Card: Intel 4965 (doesn´t work), installed DELL 1390
Ethernet: Marvell Yukon
Keyboard: Working but Alt&Option changed
Touchpad: ALPS works (not two finger, but not tried for long time)
Webcam working out of the box.
Installation: DUAL BOOT with Windows 7
1- Install Leopard on a external HardDrive (USB), boot at this system
2- Use Disk Utility to partition the hard drive on two MBR partitions. First in HFS type and second on FAT32 type (for Windows 7 or other).
3- Open SnowLeopard Iso and copy it to the folder on the desktop or any other location you want.
4- Copy OSInstall.mpkg modified (in order to install on a MBR partition) on System/Installation/...
5- Install Snow Leopard on First Partition (HFS).
6- Restart
7- Install Windows Seven in the other partition formating it to NTFS
8- Boot in the Leopard HardDrive (external, the first we use).
9- Use OSX86 TOOLS to remake a EFI PARTITION at first partition (HFS)
10- Install Chamaleon 2 at first (HFS) partition
11- Erase the content at Extensions folder at /Extra/Extensions
12- Copy this extensions:
- AppleACPIBatteryManager.kext
- AppleACPIP2Nub.kext
- ApplePS2Controller.kext
- fakesmc.kext
- Natit.kext
- NullCPUPowerManagement.kext
- PlatformUUID.kext
- VoodooHDA.kext
13- Erase IOATAFamily.kext from /System/Library/Extensions
14- Copy VoodooHDA.kext to /System/Library/Extensions
15- Execute DSDT GUI with force compile
16- Move these folders (/Extra/Extensions) and (/System/Library/Extensions) over KextUtility (one at time)
17- (OPTIONAL) Buy a DELL 1390 wifi card that works OUT OF THE BOX
18- Restart & Enjoy
(added Extensios kext)
Requeriments:
- DELL XPS 1530m LAPTOP
- DELL 1390 Wifi card (optional)
- Snow Leopard Retail
- Chamaleon RC2
- Windows 7 (or other version)
- Kext Utility
- OSX86 Tools
- SnowLeopard Kext 64bit prepared: AppleACPIBatterManager.kext, AppleACPIPS2Nub.kext,ApplePS2Controller.kext,fakesmc.kext,Natit.kext,NullCPUPowe
rManagement.kext, PlatformUUID.kext,VoodooHDA.kext
- External HardDrive (USB)
My DELL XPS 1530m
Intel Core2Duo 8100 (2,1Ghz)
Motherboard Dell
Audio: Sigmatel 9228 (9205 in Bios)
Video: nVidia 8600m 256mb (recognized like 8400 with Natit.kext in /Extra) QE/CI fully working
Wireless Card: Intel 4965 (doesn´t work), installed DELL 1390
Ethernet: Marvell Yukon
Keyboard: Working but Alt&Option changed
Touchpad: ALPS works (not two finger, but not tried for long time)
Webcam working out of the box.
Installation: DUAL BOOT with Windows 7
1- Install Leopard on a external HardDrive (USB), boot at this system
2- Use Disk Utility to partition the hard drive on two MBR partitions. First in HFS type and second on FAT32 type (for Windows 7 or other).
3- Open SnowLeopard Iso and copy it to the folder on the desktop or any other location you want.
4- Copy OSInstall.mpkg modified (in order to install on a MBR partition) on System/Installation/...
5- Install Snow Leopard on First Partition (HFS).
6- Restart
7- Install Windows Seven in the other partition formating it to NTFS
8- Boot in the Leopard HardDrive (external, the first we use).
9- Use OSX86 TOOLS to remake a EFI PARTITION at first partition (HFS)
10- Install Chamaleon 2 at first (HFS) partition
11- Erase the content at Extensions folder at /Extra/Extensions
12- Copy this extensions:
- AppleACPIBatteryManager.kext
- AppleACPIP2Nub.kext
- ApplePS2Controller.kext
- fakesmc.kext
- Natit.kext
- NullCPUPowerManagement.kext
- PlatformUUID.kext
- VoodooHDA.kext
13- Erase IOATAFamily.kext from /System/Library/Extensions
14- Copy VoodooHDA.kext to /System/Library/Extensions
15- Execute DSDT GUI with force compile
16- Move these folders (/Extra/Extensions) and (/System/Library/Extensions) over KextUtility (one at time)
17- (OPTIONAL) Buy a DELL 1390 wifi card that works OUT OF THE BOX
18- Restart & Enjoy
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.