Current OS X Version: Leo4All v3 (Leopard 10.5.2)

Desktop/Laptop? Laptop

Prebuilt? Y
(If prebuilt then add following information, otherwise fill the Motherboard:)
Manufacturer: HP
Model: Pavilion DV2054EA

Install Methods summary: Installation was fine, without any major problems, although the NVinject video kexts didnt work so I had to remove them in safe mode and load up the VESA kexts. I also installed the MacBook AppleSMBIOS, all audio and network kexts and ACPIPlatform. I also installed without any extra peripherals attached. I currently dual boot with Windows Vista using the Darwin/x86 bootloader - 60GB dedicated to Vista because I originally used it far more for obvious reasons, and 30GB to Leopard. I got the "HFS+ partition error" straight after installation, so I used this website to instruct me on how to fix it; http://www.jaideawhosting.com/nolifelover/...e-head-banging/

Does EFI and/or the Vanilla kernel work? Yes, partitioned as MBR, EFI v8 + Vanilla Kernel 9.2.2

Manufacturer: N\A
Motherboard Model: N\A
Chipset: Intel
BIOS Version: N\A, Revision: N\A - Unsure, but I know it uses Phoenix BIOS.
BIOS setup options: Default settings work fine
Audio: Intel HD Audio, no but worked after installing the AzaliaAudio package
LAN: Intel PRO\100 Ethernet, WOOTB.
SATA & IDE: Intel ICH7-M AHCI, WOOTB.

Processor
Processor Model: Intel Core Duo T2300E
Speed: 1.66GHz
Recognized as what in System Profiler: Genuine Intel CPU T2300 @

Video Card
What type of card: Mobile PCI-E
NVIDIA/ATI/Intel? NVIDIA
Model: GeForce Go 7200
Memory: Up to 128MB with TurboCache
Board Manufacturer: N\A
Patches used: Firstly, I had to remove the pre-installed NVinject kexts, so in safe mode I removed them and loaded up with VESA. I then installed NVinjectGO 0.20c, and then Leopard Graphics Update 1.0.
QE/CI: Supported/Hardware Accelerated
All resolutions available? No, all resolutions from 640x480 to 1280x800 only.

Other PCI/PCI-e Components (USB are listed in Other Accessories below)
Wireless/Wired Card: Wireless
Interface: PCI/PCI-e? PCI-E
Standard (Wireless only): 802.11a/b/g
Manufacturer: Intel
Model: PRO/Wireless 3965ABG
Works? N
Patches: N\A

Other Accessories (USB/FIREWIRE)
Type: Webcam
Name: 1.3MP Webcam
Manufacturer: HP (although displays as Sonix Technology Co., Ltd in System Profiler)
Works? Yes, OOTB

Other Accessories (USB/FIREWIRE)
Type: Bluetooth
Name: Integrated Bluetooth
Manufacturer: HP (although displays as Broadcom in System Profiler)
Works? Yes, OOTB

Other notes:
1. Mouse scroll doesn't work
2. Card reader is untested, but there is no sign of its presence in Leopard
3. QuickPlay buttons do not work, apart from the volume control buttons - Increase, Decrease and Mute
4. Laptop screen doesn't "wake up"\stays black upon resuming from standby, or due to inactivity
5. Photo Booth works for basic use (recording video or taking standard photos) but Effects is very unstable, a lot of the time it automatically closes and an error message appears.

Apart from those minor issues at best and also after a few hours of researching and scouring the web for the post-installation fine tuning and tweaking, it is running beautifully and it has taken to me so much that it has overtaken Vista as my primary OS! . All your work is greatly appreciated so many thanks for creating the OSX86 experience!

Liv

Current OS X Version: 10.5.2Install method: Kalyway 10.5.2 vanilla kernel 
EFI working? --Yes

Prebuilt? --No

Motherboard
Manufacturer: ASUS
Model: V3 P5945GC Barebones desktop
Version: 2.0
Bios Version: 0303
Chipset: Intel 945GC
Audio: working? -- Yes patches? -- No. but only 2-channel output, have not tried line in or mic in.
LAN: working? -- Yes patches? -- No.
Required patches etc? -- No.

CPU
Model Number: C2D E4300
Recognised as: 1.80 GHZ Core 2 Duo Overclocked to 2.4 Ghz

Memory/DDR: 2GB DDR2 (2x1GB Corsair) working and overcloakable

Video
Manufacturer: Sapphire
Model: ATI HD 3650 
Bus Type: PCI Express 16X
Memory size: 512MB DDR3
Dual screen working? --haven't tried.
QE/CI working? --Yes Resolution changeable? -- Yes.
Required patches or bios flashing? -- nvkushInstaller.pkg, no BIOS flashing needed.

SATA/IDE working: Both works.

Wifi & patches? -- Netgear WIN311B works out of the box with Broadcom selected during install.
other peripherals/pci addon cards? ATEN 4-port KVW switch

misc hardware:
Keyboard: Logitech G11 Keyboard
Mouse: Logictech Cordless Click! Plus Optical USB
DVD Drive: SATA TSSTcorp CD/DVDW SH-S183A (Samsung)
Display: MIRAI LCD 20" Display
HDD: Seagate 250GB SATA2

Sleep(system will not wake up)
System Profiler (works)

Current OS X Version: Kalyway 10.5.2

Desktop

Self-Assembled

Install Methods summary: Installed Kalyway 10.5.2 on USB Hard Drive and started up without problems.

Does EFI and/or the Vanilla kernel work? Partitioned as MBR with Vanilla Kernel


Motherboard
Manufacturer: ASUS
Motherboard Model: T3-P5945GC Silver
Chipset:North Bridge Intel 945GC & South Bridge ICH7
BIOS Version: Don't recall, revised to 0801
BIOS setup options: Suspend mode: S1 (Sleep never works well); Report Video on S3 Resume: Disable; ACPI 2.0 Support: Yes; ACPI APIC Support: Enabled

Audio: Worked with Taruga AD1988B Rev4 installer
LAN: Worked OOB.
SATA & IDE: IDE works out of box. SATA not yet tested.

Processor
Processor Model: Intel Core 2 Duo
Speed: 2.4GHz
Recognized as what in System Profiler: Intel Core 2 DUP E4600

Video Card (if you have integrated and PCI/AGP, use this template twice)
What type of card (PCI Express/AGP/Integrated): PCI Express x 16
NVIDIA/ATI/Intel? ATI
Model: EAH3650 SILENT MAGIC/HTDP
Memory: 512MB
Board Manufacturer: ASUS
Patches used: I think the DVI was working OOB with Kalyway 10.5.2, though I think you can apply the patches found here http://forum.insanelymac.com/index.php?showtopic=107526 and get full functionality including multiscreen. I also had to dremel off a portion of the heatsink and an area next to the DVI plugs to make it fit...
QE/CI:QE Supported/CI Hardware Accelerated
All resolutions available? Yup.

Other PCI/PCI-e Components (USB are listed in Other Accessories below)
Wireless/Wired Card (for PCI/PCI-e cards only)
Interface: PCI/PCI-e?
Standard (Wireless only): (example: 801n)
Manufacturer:
Model:
Works? (Y/N, if "Y", list patches)
Patches:

Sound Card (this is for PCI/PCI-e cards only - integrated on motherboard is in motherboard section)
Interface: PCI/PCI-e?
Manufacturer:
Model:
Works? (Y/N, if "Y", list patches)
Patches:

Other Accessories (USB/FIREWIRE)
Type (Webcam, External Sound Card, USB bluetooth dongle, etc.):
Name: WL-167g USB 2.0 WLAN
Manufacturer: ASUS
Works? Yes. Needed RT73USBWirelessDriver.kext

Hello. I would like to get a sony vaio fw11E as a new laptop computer. Would i be able to run Leopard on it ?i've searched the forum, but haven't found anything on that matter. Thanks in advance!

Current OS X Version: 10.5.5

Desktop

Prebuilt? Yes
Manufacturer: Medion
Model: Akoya MD 8828

Install Methods summary: (List all methods tested, check preferred method - the one you are writing about now)

Does EFI and/or the Vanilla kernel work? (example: partitioned as MBR, EFI v8 + Vanilla Kernel) partitioned as GUID

(in following sections, if you don't know or not sure, write "unknown")
vMotherboard
Manufacturer: MSI
Motherboard Model: MS-7502 Series
Chipset:North Bridge: Intel® G33 chipset
South Bridge: Intel® ICH9DH chipset
BIOS Version: , Revision: unknown
BIOS setup options: Normal (unknown)
Audio: Works out of the box? If not, list patches. No
LAN: Works out of the box? If not, list patches. No
SATA & IDE: Works out of the box? If not, list patches. yes
Integrated Sound Card:
Standard (Wireless only): 802.11 B/G
Manufacturer: Ralink
Model: RT2870
Works? (Y/N, if "Y", list patches) unknown
Patches: USB (RT2870) from site

Processor
Processor Model: Core 2 Duo E6750
Speed:2x 2,67 GhZ
Recognized as what in System Profiler: Core 2 Duo 4 GhZ

Video Card (if you have integrated and PCI/AGP, use this template twice)
What type of card (PCI Express/AGP/Integrated):PCI-e
NVIDIA/ATI/Intel? NVIDIA
Model:Geforce 8600 GS
Memory:512 Mb
Board Manufacturer: MSI
Patches used:NVinject 256mb
QE/CI:yes!
All resolutions available? Yes

Sound Card (this is for PCI/PCI-e cards only - integrated on motherboard is in motherboard section)
Interface: PCI/PCI-e?
Manufacturer: Realtek
Model:ALC888S
Works? Yes
Patches: ALC888 Patch

Other Accessories (USB/FIREWIRE)
Type (Webcam, External Sound Card, USB bluetooth dongle, etc.):Webcam
Name: 1507
Manufacturer: Trust
Works? (Y/N, if "Y", list patches, if needed) no
Patches/Work out of the box? no

Other Accessories (USB/FIREWIRE)
Type (Webcam, External Sound Card, USB bluetooth dongle, etc.): X10 Remote Control
Name: Medion
Manufacturer: Medion
Works? (Y/N, if "Y", list patches, if needed) no
Patches/Work out of the box? no

Current OS X Version: 10.5.5
Install method: Boot-132 using grub-dfe.iso to install.

Prebuilt? --No

Motherboard
Manufacturer: DFI
Model: Lanparty JR p45-t2rs
Bios Version: Latest (J245DA07)
Chipset: Intel P45
Audio: working? -- Yes patches? -- Yes, using ALC 889 Beta drivers found here http://forum.insanelymac.com/index.php?showtopic=129058

LAN: working? -- Yes patches? -- No.
Required patches etc? -- AHCI patch here http://forum.insanelymac.com/index.php?act...st&id=37284

CPU
Model Number: C2D E6600
Recognised as: Core 2 Duo 2.4ghz

Memory/DDR: 4GB DDR2 (4x1GB Gskill)

Video
Manufacturer: ASUS
Model: nVidia 8800GT
Bus Type: PCI Express 16X
Memory size: 512MB GDDR3
Dual screen working? --yes
QE/CI working? --Yes Resolution changeable? -- Yes.
Required patches or bios flashing? -- EFI String or nvinject.

SATA/IDE working: Both works.

Wifi & patches? -- only AHCI and sound.
other peripherals/pci addon cards? No.

misc hardware: Apple Keyboard, Razer Copperhead

Current OS X Version: 10.5.5

Desktop/Laptop? Desktop

Prebuilt? Y
Manufacturer: DELL
Model: XPS 420
Motherboard: 0TP420
Bios: A06

Install Methods summary: Kalyway 10.5.2 Intel_Amd.ISO, Kalyway 10.5.3(Combo update), Apple 10.5.4 Update, apple 10.5.5 Update

Does EFI and/or the Vanilla kernel work? MBR, Efiv8 Vanilla (Current)


Motherboard
Manufacturer: SMSC
Motherboard Model: 0TP420
Chipset: X38/ICH9R(SB)
BIOS Version: , Revision:A06
BIOS setup options: On Board Lan Disabled, Speed Step Disabled
Audio: Integrated Not Working BIG HASSLE
LAN: INtegrated Not Working
SATA & IDE: Sata Works in ATA Mode Only, Did not try RAID, Some AppleSMBios.kext Mods to recognize System Components
Processor
Processor Model:Intel Core 2 Quad Q6600 2.4Ghz
Speed: 3.0 Ghz
Recognized as what in System Profiler:Intel Core 2 Quad Q6600 2.4Ghz

Video Card (if you have integrated and PCI/AGP, use this template twice)
What type of card (PCI Express/AGP/Integrated): PCIe2.0
NVIDIA/ATI/Intel? Nvidia(XFX)
Model:GeForce 8800 GTS
Memory:640MB
Board Manufacturer:XFX
Patches used:None Using EFI driver (from EFI Studio)
QE/CI:Hardware Accelerated enabled QE/CI
All resolutions available? Up To 1650x1080

Other PCI/PCI-e Components (USB are listed in Other Accessories below)
Wireless/Wired Card (for PCI/PCI-e cards only)
Interface:PCI
Standard: Ethernet
Manufacturer: D-Link
Model:DFE-530+ 100Mbs
Works? Yes
Patches:None

Sound Card (this is for PCI/PCI-e cards only - integrated on motherboard is in motherboard section)
Interface:USB
Manufacturer:Turtle Beach
Model:Audio Advantage USB 5.1
Works? Yes
Patches:None

Other Accessories (USB/FIREWIRE)
Type External Hard Drive
Name: Maxtor from Old Laptop
Manufacturer:
Works? Yes
Patches/Work out of the box? No Patches

Hola soy nuevo aqui mi nombre es Ariel tengos dos meses tratando de INSTALAR MAC LEOPARD IDENEB. KALYWEY. IKOST. y LEO y nuguno me funcionan el qu emas me hace es el ideneb el por lo menos sube a la instalacion y se instala pero no sube que tengo q hacer e cambiado de board tenia un pcchip P55g nu funciono compre un MSI P45 NEO-F

DUAL CORE 2.5 E5200
4GB 800MHZ DDR2
DISCO DURO 160 SATA WD
DVD SATA
MSI P45 NEO F
VIDEO ATI X1550

QUIERO SABER SI FUNCIONA CON LO QUE TENGO O NO PORFAVOR ALGUIN ME AYUDA

Hi-
How did you get your display to work w/ QE/CI? I've installed the Kalyway 10.5.2 version (had to reinstall after I lost LAN w/ 10.5.3)-- it looks stretched and a little grainy. My Tablet is the same model with the T7200 processor. Any help or pointers would be much appreciated, thanks! Also, have you tried any updates?

Desktop/Laptop? - Desktop

Prebuilt? (Y/N) No

ISO/Version iDeneb Leopard 10.5.5

Install Methods summary: (List all methods tested, check preferred method - the one you are writing about now) - Will update with i get a chance to check my partner installed it for me

Does EFI and/or the Vanilla kernel work? (example: partitioned as MBR, EFI v8 + Vanilla Kernel) update with i get a chance to check my partner installed it for me

(in following sections, if you don't know or not sure, write "unknown")
Motherboard
Manufacturer: Asus
Motherboard Model: P5N-E SLI
Chipset: Nfoce 650i
BIOS Version: 1101, Revision: Unknown
BIOS setup options: (example: SATA should be set as "native", "AHCI"; Processor - set EIST to "disabled") Will update with i get a chance to check my partner installed it for me
Audio: Patched only works in 2.1
LAN: Works out of the box? If not, list patches.
SATA & IDE: Works out of the box? If not, list patches. Will update with i get a chance to check my partner installed it for me

Processor
Processor Model: Intel core2quad q6600
Speed: 2.4ghz
Recognized as what in System Profiler:

Video Card (if you have integrated and PCI/AGP, use this template twice)
What type of card (PCI Express/AGP/Integrated): PCI E
NVIDIA/ATI/Intel? Nvidia
Model: BFG 8800gts
Memory: 640mb
Board Manufacturer: BFG/Nvdida
Patches used: Will update with i get a chance to check my partner installed it for me
QE/CI: Will update with i get a chance to check my partner installed it for me
All resolutions available? works up to 1650 x 1050 - 22 inch monitor

Other PCI/PCI-e Components (USB are listed in Other Accessories below)
Wireless/Wired Card (for PCI/PCI-e cards only)
Interface: PCI/PCI-e?
Standard (Wireless only): (example: 801n)
Manufacturer:
Model:
Works? (Y/N, if "Y", list patches)
Patches:

Sound Card (this is for PCI/PCI-e cards only - integrated on motherboard is in motherboard section)
Interface: PCI/PCI-e?
Manufacturer:
Model:
Works? (Y/N, if "Y", list patches)
Patches:

Other Accessories (USB/FIREWIRE)
Type (Webcam, External Sound Card, USB bluetooth dongle, etc.): Wireless Dongle
Name: D-link Wirelless Dongel DWL G122
Manufacturer: Dlink
Works? (Y/N, if "Y", list patches, if needed) Yes, sometimes drops out
Patches/Work out of the box? Patched

Will find out any other information and websites that was used to install ideneb 10.5.5

Fujistu-Siemens M1425
Tried: Leo4Allv3
Ideneb 1.3
Ideneb 1.1
Toh 9.2
iAktos 2.0
Kalyway 10.5.1

No start of installation,
total failure

Current OS X Version: iDeneb v1.3 10.5.5

Desktop
Prebuilt? N

Install Methods summary: Installed from boot DVD, selected Customize with ATI X1300, Intel Chipset Fix

Does EFI and/or the Vanilla kernel work? Unknown

Motherboard
Manufacturer: Asus
Motherboard Model: P5B-VM DO
Chipset:
BIOS Version: 1002
BIOS setup options: SATA should be set as "native", "AHCI"
Audio: Had to install AC97HDAudio patch
LAN: Had to install Intel82566MM.kext
SATA & IDE: worked oob
Other: Firewire and USB work OOB


Processor
Processor Model: Intel® Pentium® Dual CPU E2180
Speed: 2.0GHz
Recognized as what in System Profiler:

Video Card ATI
Model:X1300
Memory: 256MB
Board Manufacturer:
Patches used: NatitX1300
QE/CI: no
All resolutions available? Yes, 1280x1024

-I've played with adding the device it in the ATIRadeonX100.kext\Contents\Info.plist to no avail. QE/CI won't work. I'll be replacing the X1300 with a 8600GT in the near future.

Current OS X Version: 10.5.2

Desktop

Prebuilt? Y
Manufacturer: Gateway
Model: GT5668E

Install Methods summary: Kalyway 10.5.2 Intel/AMD DVD

Does EFI and/or the Vanilla kernel work? Kalyway Sleep kernel (problem with video wakeup)

(in following sections, if you don't know or not sure, write "unknown")
Motherboard
Manufacturer: NVIDIA
Motherboard Model: Unknown
Chipset: NVIDIA MCP61 Northbridge/Southbridge
BIOS Version: Phoenix Version: unknown
BIOS setup options: default
Audio: Works out of the box? yes
LAN: Works out of the box? no
SATA & IDE: Works out of the box? yes

Processor
Processor Model: AMD Athlon 64 X2 6000+
Speed: 3.0 Ghz
Recognized as what in System Profiler: 3.0 GHz AMD Athlon

Video Card
What type of card (PCI Express)
NVIDIA/ATI/Intel? Nvidia
Model: 7200GT
Memory: 256MB
Board Manufacturer: EVGA
Patches used: None
QE/CI: dont know
All resolutions available? Yes

Other PCI/PCI-e Components Netgear FA311 10/100 Ethernet (patched with IONetworkingFamily.kext from 10.4.7 from this post) (Windows Vista driver DP83816 MacPHYTER II)
Wireless/Wired Card none


Sound Card
Interface: Integrated
Manufacturer: unknown
Model: unknown
Works? Yes
Patches: none

Other Accessories none

Version: Kaliway Intel/AMD 10.5.2

Desktop

Install Methods summary: Kalyway 10.5.2, Default Parameters + NVInject 320


Motherboard
Manufacturer: Asus
Motherboard Model: M3N-HD/HDMI
Chipset: Nvidia nForce 750a SLI
BIOS Version: Revision: 1301
BIOS setup options: Enabled AHCI
Audio: Realtek ALC1200 (AppleAzaliaAudio) AppleAzaliaAudio Realtek ALC1200 (Modificate by Derty) Thanks
Network : Onboard Atheros F1 Phy Gigabit (Not Tested) Belkin G Plus MIMO USB Network Adapter (RUN PERFECT)
SATA & IDE: Work Perfect

Processor
Processor Model: AMD Athlon X2 6400+ Black Edition
Recognized as what in System Profiler: 3.2Ghz

Video Card
Type of card: PCIe Express
Model: Nvidia 8800GTS
Memory: 320MB
Manufacturer: PNY
Patches used: NVInject 320 at install
All resolutions available? Yes

Desktop/Laptop? - Desktop

Prebuilt? No

ISO/Version Kalyway Leopard 10.5.2

Install Methods summary: Used P5q/p45 tutorials on this forum!

Does EFI and/or the Vanilla kernel work? Used the exclusive S3 / Intel kernel (forgot the name)

Motherboard
Manufacturer: Asus
Motherboard Model: P5Q Pro
Chipset: P45
BIOS Version: 1406 Revision: Unknown - modded one from this forum
BIOS setup options: AHCI - all cpu enhancements off.
Audio: Patched, basic output only works
LAN: Atheros AR8121 - not working
SATA & IDE: SATA 2.5" 40 GB HDD (From my PS3!)

Processor
Processor Model: Intel Core 2 Duo 6750
Speed: 2.66ghz
Recognized as what in System Profiler: 3.8Ghz?! (Don't know why!)

Video Card
What type of card: PCI E
NVIDIA/ATI/Intel? ATI
Model: 4850
Memory: 512mb
Board Manufacturer: HIS
Patches used: NA
QE/CI: NA
All resolutions available? no - manual "Graphics Mode"="1680x1050x32" and only does 1400x1050

*Need Kext's/Drivers for this!*

Other PCI/PCI-e Components
Wired Card: Purchased Realtek RTL8139 - works out of box
Interface: PCI
Manufacturer:Repotek or something
Model: Realtek RTL8139
Works? Y
Patches: none needed!

Current OS X Version: Kalyway 10.5.2 AMD Intel
Desktop

Does EFI and/or the Vanilla kernel work?
No. mach_kernel and sleepkernel works fine.

(in following sections, if you don't know or not sure, write "unknown")
Motherboard
Manufacturer: ECS
Motherboard Model: NForce4M-A V3
Chipset: nForce4
BIOS Version: Newest , Revision: Rev. 3
BIOS setup options: Default Options
Audio: Works, Realtek AC97
LAN: Works but had freezing problems. Replaced forcedeth.kext with nForceLan.kext, now working fine.
SATA & IDE: SATA HD works, but DVD did not, so updated the test AppleVIAATA.kext
Processor
Processor Model: AMD Athlon64 X2 4000+
Speed: 2100MHz
Recognized as what in System Profiler: unknown

Video Card
What type of card (PCI Express/AGP/Integrated): PCIe
NVIDIA/ATI/Intel: NVIDIA
Model: 7300GT
Memory: 256mb
Board Manufacturer: Inno3D
Patches used: NVInject-256.kext
All resolutions available: Yes.
Dual Monitor: Untested

Other PCI/PCI-e Components (USB are listed in Other Accessories below)
Wireless/Wired Card (for PCI/PCI-e cards only)
Interface: PCI
Standard (Wireless only): 802.11b
Manufacturer: Encore
Model: RTL8185
Works? N
Patches: N/A

Interface: PCI
Type: TV Card
Manufacturer: Intex
Model: SAA7130
Works? N
Patches: N/A

Other Accessories (USB/FIREWIRE)
Type (Webcam, External Sound Card, USB bluetooth dongle, etc.): Bluetooth Dongle
Name: Broadcom 2058 v2.0
Manufacturer: Broadcom
Works? (Y/N, if "Y", list patches, if needed) Y
Patches/Work out of the box? Y

Current OS X Version: 10.5.2 Leo4Allv3

Desktop/Laptop?
Desktop

Prebuilt? (Y)

Manufacturer: Dell
Model: SC440 Pentium D 4Gig RAM

Install Methods summary:

Working: SC440 3.0GHz Pentium D with 4G memory using Leo4Allv3.

Initially tried "as is" (ie was set up for PCLinuxos 2007) with a PCI FX5200 graphic installed and a second HDD installed. Well did not have much success.

Removed the second HDD and got much further in the boot to the point that the graphic startup failed and subsequently the windows manger startup failed - strong hint here to remove the graphic which I did . . . ie now back to as near a vanilla system as I could and had better success.

Options selected at this point were:
ACPI - 1.2.1
SMBIOS - DDR667
Kernel - 9.2.2
Chipsets - old Nforce (due to possible kernel panic due to SATA causing reboots), Intel-ICHx, Nvidia, Network/Broadcom
Remove FW

To do:
1. I need to get a better graphic running (need to do the PCIEx4 slot mod) as the mobo based graphic with VGA output has an offset to the left I cannot get rid of and besides is limited to 1024x768.

Fixed. Got the PCI bus FX5200 running ok. Booted using the MOBO graphic to get to a working desktop. Downloaded and installed the GEForce package universal installer from here
http://forum.insanelymac.com/index.php?sho...rt=#entry461785

Note is took a while to finalize the installation - be patient.

The system will reboot after the install - I killed the power at the safe moment - put back the PCI FX5200 and the system came up with the OS X desktop. All display resolutions are available.

2. Find out why second SATA hard drive mucks things up

Once the system is running however the second disk CAN be re-connected and it IS recognized.
ie disconnect only during the install process

3. FrontRow does not work - blank screen (as noted elsewhere)

I will use XBoxMediaCentre for OSX in any case

4. Install Broadcom based PCIex1 gigE adapter (will work as noted elsewhere)

Installed a Linksys WMP54G Wireless-G PCI Adapter. OSx86 Hardware guide claims needs STA_2500CardBus driver but ran out of the box with no additional driver needed.

Reports in system profiler as "Third Party wireless Card"

Does EFI and/or the Vanilla kernel work?

Not quite sure here - used the 9.2.2 Kernel option in Leo4Allv3

Motherboard
Manufacturer:
Motherboard Model:
Chipset:
BIOS Version: , Revision: 1.5
BIOS setup options: Default
Audio: USB SOund Blaster SB0271 - worked out of the box
LAN: on board gigE not functional - not recognised - plan to buy PCIe Broadcom based gigE - reported to work
SATA & IDE: SATA only. Note install with one drive active - see comments above

Processor
Processor Model: Pentium D
Speed: 3.0GHz
Recognized as what in System Profiler: intel Pentium D CPU

Video Card
What type of card (PCI Express/AGP/Integrated): Integrated
NVIDIA/ATI/Intel? ATI
Model: unknown
Memory: 16M
Board Manufacturer: unknown
Patches used: none
QE/CI:unknown
All resolutions available? only 1024x768 and video is offset to left but useable to install GEForce drivers (see above)

Video Card
What type of card (PCI Express/AGP/Integrated): PCI
NVIDIA/ATI/Intel? NVIDIA
Model: FX5200
Memory:128M
Board Manufacturer:unknown
Patches used: Installed GEForce drivers from http://forum.insanelymac.com/index.php?sho...rt=#entry461785 using internal video display then inserted this PCI card
QE/CI:
All resolutions available? yes

Other PCI/PCI-e Components

PCI bus USB card using NEC chipset. Audio running from this btw.

Wireless/Wired Card none yet

Sound Card no PCI/PCIe

Other Accessories none

Current OS X Version: 10.5.5

Desktop/Laptop? Desktop

Prebuilt? (Y/N) No


Install Methods summary: iATKOS v5i

Does EFI and/or the Vanilla kernel work? EFI v9 + Vanilla Kernel


Motherboard
Manufacturer: Gigabyte
Motherboard Model: EP45-UD3P
Chipset: Intel ICH10-R
BIOS Version: F4
BIOS setup options: SATA must be set to AHCI "native" Mode
Audio: HDAEnabler + patched AppleHDA.kext
LAN: Works out of the box
SATA & IDE: select patched AHCI driver at installation, else it will be detected as "Unknown AHCI Controller". IDE not tested.

Processor
Processor Model: Intel Core2Duo E8400 (E0)
Speed: 3.0 GHz
Recognized as what in System Profiler: Core2Duo E8400

Video Card (if you have integrated and PCI/AGP, use this template twice)
What type of card: PCI Express
NVIDIA/ATI/Intel?: NVIDIA
Model: Geforce 9800 GTX
Memory: 512MB
Board Manufacturer: Xpert Vision
Patches used: select 8800 GTS EFI String at installation
QE/CI: YES/YES
All resolutions available?: YES

Current OS X Version: 10.5.5

Desktop/Laptop? Desktop

Prebuilt? (Y/N) No

Install Methods summary: iATKOS v4 (didn't work), iDeneb 1.3 10.5.5 (didn't work), Kalyway 10.5.2 w/ TheStevo Patch (didn't work), iATKOS v5i (needed to boot DVD with cpus=1 . . . didn't work), XxX x86 10.5.5 Leo Install Disc Beta1 (needed to boot DVD with cpus=1 . . . Success!!)

Does EFI and/or the Vanilla kernel work? No . . . at least not since I got things working with Chameleon and the Voodoo Beta 9.5.0 kernel

(in following sections, if you don't know or not sure, write "unknown")
Motherboard
Manufacturer: ASRock
Motherboard Model: 4CoreDual-SATA2
Chipset: PT880Pro / PT880 Ultra
BIOS Version: Revision: 1.90 (2.10 didn't work)
BIOS setup options: CPU FSB Timing set to Manual to fix timer calibration error, Manual DDR RAM Settings, Disabled Serial, Parallel & MIDI Ports, No-Excute Memory Protection = Enabled, HPET Table = Enabled
Audio: Works out of the box? No - trying ALC888 patches and maybe HDAudio
LAN: Works out of the box? No - Needs VIARhine.kext
SATA & IDE: Works out of the box? IDE working after installion but requires VIAATA enabled during installion. Haven't tried SATA.

Processor
Processor Model: Intel E2220
Speed: 2.40 GHz
Recognized as what in System Profiler: Core Duo E2220

Video Card (if you have integrated and PCI/AGP, use this template twice)
What type of card (PCI Express/AGP/Integrated): AGP
NVIDIA/ATI/Intel? NVidia
Model: 7800GS
Memory: 256
Board Manufacturer: BFG
Patches used: NVKush with AGPGART removed (AGPGART hung @ boot-up)
QE/CI: Yes
All resolutions available? Yes although my LG LCD Monitor's native resolution is not available via VGA.

Other PCI/PCI-e Components (USB are listed in Other Accessories below)
Wireless/Wired Card (for PCI/PCI-e cards only)
Interface: PCI/PCI-e?
Standard (Wireless only): (example: 801n)
Manufacturer:
Model:
Works? (Y/N, if "Y", list patches)
Patches:

Sound Card (this is for PCI/PCI-e cards only - integrated on motherboard is in motherboard section)
Interface: PCI/PCI-e?
Manufacturer:
Model:
Works? (Y/N, if "Y", list patches)
Patches:

Other Accessories (USB/FIREWIRE)
Type (Webcam, External Sound Card, USB bluetooth dongle, etc.):
Name: USB Flash Drive, Dell USB Keyboard, Dell USB Mouse
Manufacturer:
Works? (Y/N, if "Y", list patches, if needed) Y
Patches/Work out of the box? Y

Hello
this is my notebook configuration
MSI - GX701X-092EU
Procesor : Intel T9300 Core 2 Duo 2.50GHz
Chipset : Intel 965PM
Ekran : 17" WXGA Glare Type 1440 x 900
Grafi?ka kartica : nVIDIA GeForce 9600M GT
Memorija : 2 x 2GB DDR2 667
HDD : 320GB SATA
CD/DVD : DVD-RW
Modem : 56K
LAN : 10/100/1000
Wireless : Bluetooth, 802.11n
Konektori : VGA, HDMI, 4xUSB, 1394, Audio, Card reader 4-1
Operativni sistem : FreeDOS
Slotovi : ExpressCard
Baterija : 6-cell Li-lon

Is it compatibile with OS x?

Type: Desktop
Prebuilt: No
Install Methods: Kalyway 10.5.1 install (I attempted Vanilla installs several time without luck (but I may not have been doing it quite right))
EFI/Vanilla kernel: I chose the Vanilla kernels from the Kalyway DVD so I presume they do. After finding time slipping and scratchy sounds out the speakers while two sound sources were using the sound card (not to mention "WARNING: AppleUSBAudio has detected that clock_get_uptime () value changed radically from previous values" while the web cam was plugged in) I installed mach_kernel.voodoo (RC1) which fixed both of these issues and the system can still sleep / wake.

Motherboard
--------------

Manufacturer: Gigabyte
Motherboard Model: GA-EP45-DS3 (rev. 1.0)
Chipset: North Bridge: Intel® P45 Express Chipset, South Bridge: Intel® ICH10
BIOS Version and Revision: F8 (there is an update out but I haven't applied it)
BIOS setup options: SATA should be set as AHCI in the BIOS (see SATA & IDE below)
Audio: Doesn't work OOB, requires Audio KEXT (chipset Realtek ALC889A), have noticed slight pauses in audio play back and crackling (related to kernel issue listed above)
LAN: OOB (with Kalyway) (chipset Realtek 8111C), after upgrade to 10.5.5 (didn't try earlier) needed to update IONetworkingFamily.kext to get TimeMachine going
SATA & IDE: SATA works OOB (without AHCI in bios only shows up as 128GB, with AHCI shows up full size of drive), haven't attepted to use IDE
IEEE 1394a: I think OOB but can't confirm does work though
USB: All ports OOB
Product specific URL: http://www.gigabyte.com.tw/Products/Mother...ame=GA-EP45-DS3

Processor
-----------

Processor Model: Intel® Core™2 Quad Processor Q9550
Speed: 2.83 Ghz
Recognized as what in System Profiler: 2.83 Ghz (on 10.5.1 and 10.5.5 (after applying patches)) ("2.83 Ghz Unknown" after Voodoo kernel (detailed above))
Product specific URL: http://processorfinder.intel.com/details.aspx?sSpec=SLAWQ

Video Card
------------

What type of card: PCI Express
NVIDIA/ATI/Intel? NVIDIA
Model: GeForce 8500 GT (GV-NX85T512HP)
Memory: 512MB GDDR2
Board Manufacturer: Gigabyte
Patches used: NVInstallerV.41.pkg
QE/CI: QC/CI (after applying patch)
All resolutions available? Yes
Product specific URL: http://www.gigabyte.com.tw/Products/VGA/Pr...e=GV-NX85T512HP

Other Accessories
-----------------

Type: SATA DVD-RW
Name: DRW-2014L1T
Manufacturer: ASUS
Works? Y (haven't tested light scribe)
Patches/Work out of the box?OOB
Product specific URL: http://www.asus.com/products.aspx?l1=6&...amp;modelmenu=1

Type: USB Webcam
Name: QuickCam® Vision Pro for Mac
Manufacturer: Logitech
Works? OOB
Patches/Work out of the box?N/A

Type: USB bluetooth dongle
Name: -
Manufacturer: Cambridge Silicon Radio
Works? Y
Patches/Work out of the box?N/A

I have found one issue with the Voodoo kernel (even the final which came out today / yesterday) is that when returning from screen saver it doesn't prompt for password to unlock (even though its set in the security preferences). The only fix for me was to boot the system as normal login and log out (don't do anything) and then log in again and screen saver works asks for password to unlock. Bit of a pain but oh well.

Current OS X Version: 10.5.2
Install method:Leo4all v2, EFI working? --Not shure.......

Prebuilt? --No

Motherboard
Manufacturer: Dell or intell Idk.....
Model: I THINK 0W2562
Version: N/A
Bios Version: I think A1 if that means any thing
Chipset: Idk
Audio: working? -- Yes patches? -- No. No audio havent tryed patches but i have a UsB sound stick.
LAN: working? -- Yes patches? -- No.
Required patches etc? -- No.

CPU
Model Number: pentium 4
Recognised as: 3.00 GHZ Pentium 4

Memory/DDR: 1GB DDR (stock Ram)

Video
Manufacturer: Stock with Dell comp
Model: nVidia Idk if it is i think so
Bus Type: NA
Memory size: 256MB Ithnk
Dual screen working? --haven't tried.
QE/CI working? --Yes Resolution changeable? -- Yes (You must install the Nvidia patch!!!!!.
Required patches or bios flashing? -- Nope.

SATA/IDE working: Havent tyed Sata.

Wifi & patches? -- No.
other peripherals/pci addon cards? No.

misc hardware: Usb sound stick, Dident have to do ANY thing to install Leo4all Very EASY! But the Nvida thing...

Current OS X Version: 10.5.5

Desktop/Laptop? Desktop

Prebuilt? (Y/N) No

Install Methods summary: Install from my macbook pro, use a sata2usb to connect my desktop's new hd to install the retail version.


Does EFI and/or the Vanilla kernel work? Yes, work perfect with Chameleon

(in following sections, if you don't know or not sure, write "unknown")
Motherboard
Manufacturer: Gigabye
Motherboard Model: EP45-DS4
Chipset: Intel ICH10R
BIOS Version: F7
Revision: 1.0
BIOS setup options: enable native ACHI
Audio: Works out of the box? Need AL889A patch
LAN: Works out of the box? Yes
SATA: OOB but display as unknown ACHI controlller
Processor
Processor Model: Intel E8400
Speed: 3 GHz
Recognized as what in System Profiler: 3 GHz Unknown

Video Card (if you have integrated and PCI/AGP, use this template twice)
What type of card (PCI Express/AGP/Integrated): PCI-E
NVIDIA/ATI/Intel? NVidia
Model: 9800GT
Memory: 512 DDR3
Board Manufacturer: Zotac
Patches used: EFIstudio
QE/CI: Yes
All resolutions available? Yes

Other PCI/PCI-e Components (USB are listed in Other Accessories below)
Wireless Card
Interface: PCI
Standard (Wireless only): 802.11b/g
Manufacturer:
Model:
Works? Yes, oob w/o patch
Patches:


Other Accessories (USB/FIREWIRE)
Type (Webcam, External Sound Card, USB bluetooth dongle, etc.):

Name: Onboard Firewire400
Manufacturer:
Works? (Y/N, if "Y", list patches, if needed) Y
Patches/Work out of the box? Y

Current OS X Version: 10.5.5

Desktop/Laptop? Desktop

Prebuilt? (Y/N) No

Install Methods summary:iDeneb 1.3 10.5.5 Vanilla

Motherboard
Manufacturer: Intel
Motherboard Model: DP45SG
Chipset: P45/ICH10R
BIOS Version: Revision: 106
BIOS setup options: AHCI enable
LAN: Works with this patch http://forum.insanelymac.com/index.php?sho...rt=#entry928428
SATA : Works with AHCI enabled
UsB:In 1.1 speed it works with Legacy in bios disabled.For USB 2.0 and legacy enabled use this http://forum.insanelymac.com/index.php?showtopic=117029
Firewire:Works OOB
Sound: IDT 92HD73E - Not working (waiting for some news on this threat http://forum.insanelymac.com/index.php?showtopic=121005 or Taruga's 2.0b version)
Memory: Used 1333 mhz DDR3 SMBIOS patch from IDeneb
Product specific URL: http://www.intel.com/products/desktop/moth...sg-overview.htm


Processor
Processor Model: Intel Q9400
Speed: 2.66 GHz
Recognized as what in System Profiler: In about this mac the computer recognizes four cores but states that it is a 2.66gz unknown processor
Product specific URL: http://processorfinder.intel.com/details.aspx?sSpec=SLB6B

Video Card (if you have integrated and PCI/AGP, use this template twice)
What type of card (PCI Express/AGP/Integrated): PCI EXPRESS
NVIDIA/ATI/Intel? NVidia
Model: 9600GT
Memory: 512MB
Board Manufacturer: XFX
Patches used: AQUA MAC V2 Patch and then NVDARWIN 1.2.5
QE/CI: Yes
All resolutions available? Yes

Current OS X Version: 10.5.5 (iATKOS_5i)

Laptop

Prebuilt: Y
Manufacturer: Dell
Model: XPS M1710

Install Methods summary:
1) Disable multi core in the BIOS or use cpus=1 as a boot option (this will be fixed post install)
2) Go into disk utility and create a Mac OS Extended (Journaled) with a GUID partition table.
3) Customise and select: PCI EFI V9, AppleDecrypt, SMBIOS-EFI Air, x86 ACPI, Remove power management, OHR, Remove thermal kexts, Nvinject Go (see notes to find it), Intel SATA, Intel speedstep a and laptop battery.

Known issues: Graphics hardware acceleration does not appear to work reliably (see below for details)

Does EFI and/or the Vanilla kernel work? Vanilla kernel used

Motherboard
Manufacturer: Dell
Motherboard Model: Unknown
Chipset: Unknown
BIOS Version: Unknown , Revision: Unknown
BIOS setup options: Disable multi core or use cpus=1 option when booting pre-patch
Audio: Sigmatel 9200. Needs patch. Follow: http://www.hackint0sh.org/forum/showpost.p...amp;postcount=6 but instead of using dump 9250, use dump Sigmatel9200.txt which you can get here http://psykopat.free.fr/apple/AppleHDA/sigmatel/
LAN: (VendorID: pci14e4, DeviceID: 1600) BCM5752. Needs driver (See Insanely mac: http://forum.insanelymac.com/index.php?sho...4987&st=560 Post #584)
SATA & IDE: SATA, tick Intel SATA during the installation.

Processor
Processor Model: Core 2 DUO
Speed: 2.33
Recognized as what in System Profiler: 2.33 Intel Core 2 Duo (after patching)
Notes: To get Dual core support you must apply a kernel patch. You must know which kernel version you have in order to get the correct patch. Use the "hostinfo" command in terminal to find out. For the patch download link see:
http://forum.insanelymac.com/index.php?s=&...st&p=833339
For instructions on applying the patch see:
http://forum.insanelymac.com/lofiversion/i...php/t11890.html
After all that, you should probably also add the tscsync command into apple boot (/Library/Preferences/SystemConfiguration/com.apple.Boot.plist) under Kernel Flags

Video Card
Integrated
NVIDIA
Model: Geforce GO 7950GTX
Memory: 512
Board Manufacturer: Unknown
Patches used: Nvinject for GO 512MB mobile cards
QE/CI: Not out of the box, needs patch:

Note: I did not find this to be 100% reliable and it would not work at all with a secondary DVI display + crashed on reboot with a secondary VGA display):

Manual nVidia installation, Guide for all nVidia boards (followed the top and section for Geforce 7000 series). If you have a Geforce 7950 Go GTX you can use "0x029710DE" as the device ID.
http://forum.insanelymac.com/index.php?showtopic=111072

If you have a Geforce 7950 Go GTX you can use my NVCAP value which is:
(Recommended: Use this if you are using property list editor)
04000000 00001900 02000000 00000007 00000000
or as base64 (use if you are editing with a normal text editor):
BAAAAAAA GQACAAAA AAAABwAA AAA=

Details about NVCAP if you have a different graphics card
Otherwise either see
a) http://forum.insanelymac.com/index.php?showtopic=103549
or
(Easier) Getting NVCAP by dumping your graphics cards ROM
http://forum.insanelymac.com/index.php?s=&...st&p=753771
Notes: You have to run the nvflash utility from DOS so its probably easiest to either boot off a USB stick or use something like Hirens boot CD and then load the USB drivers to access all of your tools.

All resolutions available? Yes + can use an external display (providing you don't patch i.e. no QE/CI).

Other PCI/PCI-e Components (USB are listed in Other Accessories below)
Wireless/Wired Card
Interface: Integrated
Standard (Wireless only): 8021g
Manufacturer: Intel
Model: 4965AGN
Works? N
Patches: Some work has been done but driver is currently not working. See http://code.google.com/p/iwidarwin/ for details.

Other Accessories (USB/FIREWIRE)
Type: USB ports
Manufacturer: Unknown
Works? Y
Works out of the box: Y

Type: USB bluetooth dongle
Type: USB
Manufacturer: Belkin
Model: F8T008
Works? Y
Works out of the box: Y

Notes
You may find the "Dell Laptops Post-installer" useful although I have not used it. See:
http://forum.insanelymac.com/index.php?showtopic=97966

Current OS X Version: Kalyway 10.5.2 DVD Intel_Amd (sse2/sse3) EFI V8
Desktop/Laptop? : DESKTOP (GENERIC)

Prebuilt? (Y/N) No

Install Methods summary:Kalyway 10.5.2 DVD Intel_Amd (sse2/sse3) EFI V8
-burned to dvd-r 16x at the minimum speed of 8x via (power iso)


MOTHER BOARD: ECS BLACK SERIES A780GM-A V1.0 ATX FORM FACTOR
CHIPSET : AMD 780G & SB700
PROCESSOR : AMD X2 6000+ ATHLON PROCESSOR 3.1 GHZ 1MB L2 CACHE
MEMORY MODULE : 2X 1GB A-DATA 1066TW EXTREME CL5
ONBOARD DISPLAY : ATI HD3200 .I AM USING HDMI DISPLAY,INTEAD OF USING VGA SLOT.
HARD DRIVE : 1 SATA 500GB SEAGATE, MASTER BOOT RECORD FORMATED(MAC OS JOURNALED)
: 1 IDE 500 GB SEAGATE,FORMATED (MS DOS)
MONITOR : SONY VAIO 15" LCD I USE DVI TO HDMI ADAPTOR

ADDED HARDWARE AFTER INSTALLATION: 1 USB AUDIO ADAPTER ,1 PCI LANCARD (REALTEK RTL8139D)
because internet wont connect and audio problem appearing on screen everytime boot -v.
i have read on some reply's on this site that trying to add extra lan card would jump/pass the Do you Already Own a Mac..i tried that..

Does EFI and/or the Vanilla kernel work? VANILLA KERNEL WORKS

(in following sections, if you don't know or not sure, write "unknown")
Motherboard ECS A780GM-A
Manufacturer: ELITEGROUP
Motherboard Model: BLACK SERIES
Chipset: AMD 780G /SB700
BIOS Version: Revision: BIOS for A780GM-A (PCB:1.x) VERSION :08/11/06

BIOS setup options: it should auto detect all connected stuff like dvd/hdd.
Advance setup options: HT frequency in auto
: CPU vitualization Enable
: AMD C&Q Enable
:APIC Mode Enable
Removable device options: 1st drive floppy drive
Advance chipset Setup option :DRAM frequency AUTO
:DRAM timing mode AUTO
:Share memory detection AUTO
:HDMI AUDIO DISABLE
Integrated Peripheral options :Onboard IDE / SATA ENABLED
: SATA configuration AHCI
:Onboard audio enabled
:Onboard LAN function enabled
:Serial port1 address DISABLED
:USB FUNCTION/LEGACY SUPPORT ALL ENABLED
Powert Management :ACPI suspend type S3(STR)

PCI/PNP SETUP :PCI

SAVE AND EXIT.


ADDED PROGRAMS AND RUNNING:

MAC OFFICE 2008 REGISTERED
TOAST 8 REGISTERED
ADOBE DESIGN PREMIUM CS3 REGISTERED
SKYPE 3.0
TRANSMISSION 1.06
ADIUM
MAC THE RIPPER
YAHOO
VLC
PERIAN: ADDED SO THAT I CAN WATCH ALL VIDEO FORMAT VIA QUICKTIME

Current OS X Version: 10.5.5
Desktop Prebuilt? (No)
Install Methods summary: Kalyway, vanilla, ATi NATIT +
Retail 10.5.4 with post patch
http://forum.insanelymac.com/index.php?showtopic=135948
http://www.mediafire.com/file/dmmham9hmxd/...etail-guide.zip


Motherboard
Motherboard Manufacturer: Gigabyte
Motherboard Model: GA-EP45-DS3L
BIOS Version: F08
BIOS setup options: AHCI enabled
Audio: Working 100% (7.1 HD and Line/Mike) with

AppleHDAPatcherv1.20 + ALC888.codec.txt
Kext Helper b7 + AppleHDA.kext and HDAEnabler.kext

LAN: On board works (not sure if this is oob or because of ep45-post-patch.s)
SATA: yes
IDE: yes


Processor
Processor: Intel Q9300 (clocked to 3.38 GHz on 1800 FSB) runs hot (near intel limits of 71.4 C under folding@home load)
Recognized in System Profiler as: Unknown but reports correct speed


Video Card
Type of card: PCIe x16
Model: ATI 2400 HD 512
works, after patch with EFI Studio
All resolutions available ?: Yes

Other Components
Memory: 2GB (Fully Working)
Optical Drive: Pioneer 107 ATA (burn tested); Sony BD-ROM BD-5100S (SATA)
Hard Drives: WD 640 SATA (startup), 2x Seagate 500 (softraid), IDE Maxtor 250 (windows boot)
Keyboard: Macally ikey Slim USB
Mouse: Microsoft Intellimouse USB

Sleep, Shutdown, Reboot Works with patch

System Profiler working correctly.

Quartz graphics enabled with this utility
http://######.com/index.php?option=...1&Itemid=48

Kylaway Leopard 10.5.2 is working on
ASUS P5KPL-CM but needs additional video card (built in is not working), i have ATI HD2600XT and i had to select drivers during installation (No select-no visual after).
With IDE drives and SATA Dvd rom - fine.
No bulit-in ethernet, but i have separate pci card.

Its very, very stable.

Failed on trying update

=== Amilo Pro 3205V ===
Work Full, but only the Intel Wlan 3945 and the Soundcard input-devices works.

* Install method: IATOKS 5i, XxX_10.5.6, and more...
* No changes to bios
* sleep working fine
* Bluetooth working with a BT Mouse and Keybord, but a Headset dosen't working ?
* USB works fine
* Keyboard function keys work
* LCD panel function keys worket't great (out of the box!)
* Graphics works with Leopard Graphics Update with OSX86Tools, external monitor works in dual monitor and secend monitor modus!
* Intel Wireless 3945ABG not working
* Intel ethernet card working
* USB workeing gread
* Battery indicator working - charges fine
* PCMCIA not tested yet - should work with http://forum.insanelymac.com/index.php?showtopic=81036
* SD card reader not working (yet)- http://forum.insanelymac.com/index.php?showtopic=81036 .

Current Os: MacOs 10.5.4
Installation Method: Kalyway 10.5.2 with Vanilla Kernel, then Kalyway 10.5.3 combo update, then Apple 10.5.4 update.

Motherboard
Manufacturer: ASUS
Motherboard Model: P5E3 Deluxe Wifi-AP@n
Chipset: X38
BIOS Version: 1303
BIOS setup options: SATA set as "AHCI".
Audio: Mic in, line out, headphone out, digital out. Needs Taruga AD1988b rev4 installer.
LAN: installed both Marvell packages in Kalyway choices. Both Ethernet ports works. Integrated wifi needs some workaround, but I finally got it to work. First I installed all wifi drivers available from kalyway DVD (!), then installed system updates, and then installed Ralink RTUSB D2870-1.2.4.0a driver.
SATA & IDE: SATA drives and optical drives works OOTB, JMicron ATA not tested.

Processor
Processor Model: Intel Core2 Quad Q6600
Speed: 2,4Ghz
Recognized as what in System Profiler: Intel Core2 Quad Q6600 (used OsX86Tools)

Video Card
What type of card: PCI Express
ATI
Model: Radeon HD3870 oc
Memory: 512MB
Board Manufacturer: MSI
Patches used: Kalyway 10.5.2 Radeon HD3000 driver and white menu fix.
QE/CI: both
All resolutions available

Hi,

I have instaled MAC OS X 10.5.2 on my intel PC and everything is working except for 1 thing and that is the 'Boot Camp Assistant'. When I open it, an error message is displayed 'Aplication not supported in this Architecture'. Is there a way to get it in working condition?

Hello this is my configuration

Prebuilt? Yes

Laptop

Manufacturer: Fujitsu Siemens
Model: Amilo Li 2727
BIOS: Phoenix -- V1.06
Chipset: GML GL960 -- Intel 82801HBM
Audio: working? -- Yes -- With ALC268 Installer 2
LAN: working? -- Yes -- RTL8139 -- OOB
Required patches etc? -- Yes

Install Methods summary:
- iAtkos 4i
- X3100 For GL960 Graphics

Does EFI and/or the Vanilla kernel work? -- No

CPU
Model Number: Celeron 550
Recognised as: Intel Celeron 550
Speed: 2.00 Ghz

Memory: 2GB DDR2 667 (2x1GB Samsung)

Video
Manufacturer: Intel
Model: Intel GMA X3100
Dual screen working? -- haven't tried.
QE/CI working? -- Yes -- Resolution changeable? -- Yes.
Required patches or bios flashing? -- no BIOS flashing needed.

SATA/IDE working: Both works.

Wifi -- No. Atheros 5007EG Doesn't work

everything is working except WiFi

(original source i used for my install)

http://forum.fujitsu-siemens.de/forum/view...129&start=0

Current OS X Version: 10.5.2

Desktop/Laptop?

LAPTOP

Prebuilt?
No,

MotherBoard: Asrock P45TS


Install Methods summary:

Tested: Kalyway 10.5.2 : No boot install, stoped after text on the screen.
iAtkos 1.0 : Boot install dvd but Apple screen appears and it remains to infinite and more.

iDeneb 10.5.5 : Boot, installs, works only with cpus=1 and Sata mode AHCI

Does EFI and/or the Vanilla kernel work? Not tested

Motherboard
Manufacturer: Asrock
Motherboard Model: P45TS
Chipset: P45 + ICH10
BIOS Version: Unknown , Revision:
BIOS setup options: SATA MUST BE IN AHCI MODE
Audio: No tested
LAN: No tested
SATA & IDE: Works all fine with SATA in mode AHCI

Processor
Processor Model: Core2Duo 6600
Speed: 2,4
Recognized as what in System Profiler: Yes, Mac Pro 3 Core 2 Duo 2,4 4Gb (all i have)

Video Card
What type of card (PCI Express/AGP/Integrated):
PCI EXPRESS Nvidia 7900 256mb
NVIDIA/ATI/Intel?
Model: Nvida (ASUS) 7900
Memory: 256
Board Manufacturer: ASUS
Patches used: Nvinject 256
QE/CI: YES
All resolutions available? YES

Other PCI/PCI-e Components No tested
Wireless/Wired Card (for PCI/PCI-e cards only)
Interface: PCI/PCI-e?
Standard (Wireless only): (example: 801n)
Manufacturer:
Model:
Works? (Y/N, if "Y", list patches)
Patches:

Sound Card (this is for PCI/PCI-e cards only - integrated on motherboard is in motherboard section)
Interface: PCI/PCI-e? FIREWIRE
Manufacturer: MAUDIO
Model: 440
Works? (Y/N, if "Y", list patches)
Patches: Out of the box

Other Accessories (USB/FIREWIRE)
Type (Webcam, External Sound Card, USB bluetooth dongle, etc.):
Name:
Manufacturer:
Works? (Y/N, if "Y", list patches, if needed)
Patches/Work out of the box?

Current OS X Version: 10.5.6

Desktop/Laptop?
Desktop

Prebuilt?
No

Install Methods summary:
Tested: iDeneb 10.5.4 : Works 90% (sound and network work fine, but graphics don't)
iAtkos 1.0 : Crashes on boot every time, no exception.
iPC 10.5.6 w/ PPF1 and PPF2: Boot, installs, Works same as iDeneb

Does EFI and/or the Vanilla kernel work? Not tested

Motherboard
Manufacturer: Biostar
Motherboard Model: MCP6P-Ms
Chipset: NVIDIA GeForce 6150 / nForce 430
BIOS Version: Unknown , Revision:
BIOS setup options: Default works fine
Audio: Working 100% with AppleAzaliaAudio
LAN: Tried forcedeth and forcedeth-V, neither work at all
SATA & IDE: Both SATA and IDE work 100%

Processor
Processor Model: AMD Athlon 64 LE-1600
Speed: 2.2GHz
Recognized as what in System Profiler: 2.2 GHz Unknown (iDeneb), 3 GHz Intel Core Solo (iPC 10.5.6)

Video Card
What type of card (PCI Express/AGP/Integrated): PCI Express
NVIDIA/ATI/Intel? NVIDIA
Model: 9500GT
Memory: 512MB
Board Manufacturer: Galaxy
Patches used: NVdarwin 1.2.3 kext, NVIDIA 9000 Series Driver v2 from here, and the 10.5.5 OpenGL Framework.
QE/CI: 100%
All resolutions available? 100%

Other PCI/PCI-e Components No tested
Wireless/Wired Card (for PCI/PCI-e cards only)
Interface: PCI
Standard (Wireless only): 802.11n Draft 1
Manufacturer: Encore
Model: ENLWI-N
Works? (Y/N, if "Y", list patches)
Patches: Works 100% with official rt2860 driver from Ralink.

Current OS X Version: 10.5.2

Laptop

Not Prebuilt
Manufacturer: Acer
Model: Aspire 3003WLCi

Install Methods summary:
used sleep kernel via Kalyway 10.5.2 installation
Customize Options:
AMD Patch 1
Broadcom Airport driver (remove all other wireless drivers)

Does EFI and/or the Vanilla kernel work? N/A

Motherboard
Manufacturer:SIS
Motherboard Model:760GX
Chipset:N/A
BIOS Version: N/A
BIOS setup options: N/A
Audio: Doesn't work
LAN: Doesn't work
SATA & IDE: N/A

Processor
Processor Model:AMD Sempron 3000+
Speed:1.8Ghz
Recognized as what in System Profiler: 1.8Ghz Unknown

Video Card
What type of card (PCI Express/AGP/Integrated): Integrated
Model: M760G
Memory:N/A
Board Manufacturer:Sis
Patches used:None
QE/CI:N/A
All resolutions available: starts at 1024x768, was able to get up to 1200x768

Wireless/Wired Card
Interface: Integrated
Standard (Wireless only): 801b/g
Manufacturer: Broadcom
Model: N/A
Works? Yes with Broadcom Airport driver
Patches: N/A

Sound Card
Interface: On-board
Manufacturer:Realtek
Model:AC 97
Works? N
Patches: N/A

Current OS X Version: 10.5.6

Desktop/Laptop? Desktop

Prebuilt? (Y/N) No

Install Methods summary: IPC OSX86 10.5.6 Beta public(after mac installation say to restart, please use -f -v command after that restart.)

Motherboard
Manufacturer: Gigabyte
Motherboard Model: GA-MA78GM-S2H rev 1
Chipset: AMD 780G/AMD SB 700
BIOS Version: Revision: 1
BIOS setup options: AHCI enable n sata dvd drive
LAN: Works OOB
SATA : Works with AHCI enabled
USB: choose patch 2.0 full speed
Firewire: Works OOB
Sound: RTL889A - working by choosing the 889 driver(after install go to system preferences n choose "Internal speakers")
Memory: 4GB 800 mhz DDR2 no SMBIOS applied.
Product specific URL: search at google please

Processor
Processor Model: AMD Phenom X4 9850
Speed: 3 GHz overclocked
Recognized as what in System Profiler: In about this mac the computer recognizes four cores but states that it is a 3gz unknown processor 2MB L3 cache


Video Card
What type of card (PCI Express/AGP/Integrated): PCI EXPRESS
NVIDIA/ATI/Intel? NVidia
Model: 7300GT
Memory: 256MB
Board Manufacturer: Inno3D
Patches used: nvkush(or if u prefer on install don't choose any driver, instead use OSX86 tools to detect n install the right driver for you)
QE/CI: Yes
All resolutions available? Yes

Video Card
Disable the onboard card
What type of card (PCI Express/AGP/Integrated): Integrated
NVIDIA/ATI/Intel? ATI
Model: HD 3200
Memory: shared MB
Board Manufacturer: gigabyte
Patches used: none
QE/CI: no
All resolutions available? no, only 1027*768

Install Methods summary: IATKOS 5i - OSX 10.5.5 - After update to 10.5.6 (having run the dtst patcher) stuff still works)

Does EFI and/or the Vanilla kernel work?
Partitioned as MBR/GUID the stock kernel works with PCEFI V9

Motherboard
Manufacturer: ABIT
Motherboard Model: IP35-E
Chipset: P35 Intel ICH9
BIOS Version: , Revision: 18 - latest from abit site
BIOS setup options: Disabled IDE controller
Audio: Only thing that needs patching (LINK) (Also see attatchment)
LAN: Works out of the box
SATA & IDE: SATA works, IDE Didn't work in previous versions but should work now, i havnt tested.
Booting the setup from a SATA dvd player works flawlessly.
Memory: 8GB DDR2 - 4x 2GB PC6400 (800MHz)

Processor
Processor Model: Intel Q9450
Speed: default: 2.66GHz - Running on 3.2GHz (400mhz * 8)
Recognized as what in System Profiler: UNKNOWN

Video Card
What type of card: NVIDIA PCI-Express
Model: GeForce 8800GTS
Memory: 512MB
Board Manufacturer:MSI
Patches used: During setup I selected the appropriate EFI string for my card
QE/CI: Fully working
All resolutions seem to be working

Other PCI/PCI-e Components (onboard NIC does work with OSX)
Interface: PCI
Manufacturer: Realtek
Model: RTL8139 Fast Ethernet
Works out of the box having selected the realtek drivers during setup

Current OS X Version: Kalyway 10.5.2

Prebuilt? --No

Motherboard

Asus P5KPL-CM

• Install Method: Kalyway 10.5.2
• PS/2 - working perfectly
• SATA - working perfectly, 4 channels
• PATA - working perrfectly, both channels
• Audio - Stereo Out only with AppleAzalia
• LAN - not working
• GMA3100 Onboard Video: not tested
• System Profiler working perfectly - all values correct
• Sleep/Hibernate - never works - fan always on

CPU
Model Number: pentium D 950: 3,4 GHz
Recognised as: 3.4 GHZ

Memory/DDR: 2GB DDR2 (2x1GB Patriot)

Video
Manufacturer: Gigabyte
Model: nVidia GeForce 8400GS with 256MB GDDR2
Bus Type: PCI Express 16X
Memory size: 256MB GDDR2
Dual screen working? --haven't tried.
QE/CI working? --Yes Resolution changeable? -- Yes.
Required patches or bios flashing? -- NVinject256 -- no BIOS flashing needed.

SATA/IDE working: Both works.

Wifi & patches? -- No.
other peripherals/pci addon cards? No.

Current OS X Version: 10.5.2

Desktop

Prebuilt? (No)

Install Methods summary: (Kalyway on separate Drive)

Does EFI and/or the Vanilla kernel work? (partitioned as MBR, Dual Boot with XP through chain0, nforcekernel maxmem=3072)

Motherboard
Manufacturer:Asus
Motherboard Model:P5NE-SLI
Chipset:nforce4
BIOS Version: Ami , Revision:0301
BIOS setup options: Plug n Play Aware OS = yes, Powersaving = S1 & S3
Audio: Works out of the Box
LAN: Forcedeth Driver, expected some random System Lockups and removed the Driver for now
SATA & IDE: Works out of the Box

Processor
Processor Model: Intel E6600 CoreDuo
Speed:2,4Ghz
Recognized as what in System Profiler: Intel Core 2 Duo 1,6Ghz

Video Card
What type of card (PCI Express/AGP/Integrated): PCI-E 16x
NVIDIA/ATI/Intel? Nvidia
Model: 8800GT
Memory: 512 MB
Board Manufacturer: MSI
Patches used: nvinject 2.1
QE/CI:yes/yes
All resolutions available? yes, even with two Displays

Other Accessories (USB/FIREWIRE)
Type (Webcam, External Sound Card, USB bluetooth dongle, etc.):W-Lan, Printer HP Laserjet 1010
Name: DWL-G122
Manufacturer: D-Link
Works? Yes
Patches/Work out of the box? Ralink's plist needs to be edited with Vendor/Device ID

It kinda works on my Sony Vaio.

Model: VGN-NS110E
Processor: shows up as a core 2 duo
Memory: also perfect
Hard drive: ditto to above
Optical drive: works perfectly
USB: perfect
Firewire: says it works but it actually doesn't. Haven't found drivers yet.
ExpressCard: Apple profiler did not list it so im taking that as a no.
web cam: works but only works when it wants to take your account picture, otherwise it says the video card is not supported
Video: stuck at 1024X768 Cannot find drivers yet.
Wireless: this is a no go as well.
VGA Out: didn't bother to test seeing as how it had no display drivers.
SD and Memory Stick Duo slots: no go.

Current OS X Version: 10.5.2

Desktop/Laptop? Desktop

Prebuilt? : No


Install Methods summary:
Install OS X x86 by Kalyway on SATA HDD with AHCI enabled. and Kernel as kabylkernel.
IDE and SATA DVD drive by SONY working fine.

Dual booting with Windows Vista will not work if both the OSs are on same HDD, You Will not get an option to configur MBR. I got both OSs on separate SATA HDDs

Does EFI and/or the Vanilla kernel work? Vanilla Kernel won't boot the OS after successful Installation procedure, but kabylkernel is just fine.


Motherboard

Manufacturer: Intel
Motherboard Model: DG33FB
Chipset: Intel G33
BIOS Version: , Revision: DPP3510J.86A.0413
BIOS setup options: SATA should be set as"AHCI"; Processor - everything "disabled")
Audio: Works out of the box? Yes
LAN: Works out of the box? Yes. WLAN Works with Official NetGear WG111v3 USB adapter driver (because I use this)
SATA & IDE: SATA HDD is fine with both IDE DVD and SATA DVD made by Sony Corp.


Processor

Processor Model: Intel Core2 Quad Q6600
Speed:2.4GHz
Recognized as what in System Profiler: 2.4GHz Unknown

Video Card

What type of card : PCI Express
NVIDIA/ATI/Intel? NVIDIA
Model: GeForce 8500GT
Memory: 512 MB
Board Manufacturer: XFX
Patches used: NvInject 0.2.1 with 512MB patch
QE/CI: Both Works
All resolutions available? Yes

Integrated Gfx not working.


Audio

Type:Integrated
Patches/Work out of the box? : Works with ALC888 patch : Only Ports on Board works,
No Idea about Extended ports at front of Machine


Other Accessories

Type : Wireless USB WiFI Dongle
Name: NetGear WG111 v3
Manufacturer:NetGear
Works? Yes, With Official Driver for OS X : http://kb.netgear.com/app/answers/detail/a_id/2640
Patches/Work out of the box? Works Out of the box

Current OS X Version: 10.5.2

Desktop

custom

tested with leo4allv4

EFI seems to work

Motherboard
Manufacturer: ASUS
Motherboard Model: M3N-HT deluxe
Chipset:
BIOS Version:0503 , Revision: R.1
BIOS setup options: default
Audio: not working
LAN: not working
SATA & IDE: IDE works but SATA doest get recognised

Processor
Processor Model: Athlon 64x2 6400
Speed:3.2
Recognized as what in System Profiler: unknown, 3.2 ghz but 1 core

Video Card
What type of card PCI-e
NVIDIA
Model:8800GT
Memory:512
Board Manufacturer: Official Nvidia board
Patches used:none
QE/CI:none
All resolutions available? only 1280x768

Video Card 2:
What type of card PCI-e
NVIDIA
Model:8800GT
Memory:512
Board Manufacturer: Evga
Patches used:none
QE/CI:none
All resolutions available? none

Other Accessories (USB/FIREWIRE)
Type: webcam
Name: quickcam 5000
Manufacturer:Logitech
Works? no

Other Accessories (USB/FIREWIRE)
Type: bluetooth
Name: BHG-
Manufacturer: Belkin
Works? yes, but doesnt accept incming connections- can send though

[/list]Current OS X Version: 10.5.2

Desktop

Prebuilt? (N)

Install Methods summary: (List all methods tested, check preferred method - the one you are writing about now)

Method 1: Kalyway 10.5.1 Install and Kalyway 10.5.2 updater (using instructions found on InsanelyMac). I didn't select any of the optional installs and instead loaded the installers and kexts manually afterwards (see method 2 for links to audio and video fixes).

Method 2 (preferred): Retail Install Mac OS X disc using "modified boot-132 (found here: http://www.mediafire.com/download.php?jzznndt2vki), instructions (found here: http://menoob.com/2008/09/04/hackintosh-in...l-dvd-on-a-pc/), Chameleon for Hard Disk (found here: http://tinyurl.com/6je4eh), fix for onboard graphics (found here: http://flibblesan.co.uk/files/mac/GMA900%20Pack%20r2.zip), and onboard audio fix (alc883 installer found on Kalyway 5.1 install disc).

Does EFI and/or the Vanilla kernel work? (example: partitioned as MBR, EFI v8 + Vanilla Kernel)
With Kalyway, I used both MBR and GUID partitions.

(in following sections, if you don't know or not sure, write "unknown")
Motherboard
Manufacturer: ASUS
Motherboard Model: P5GC-MX/1333
Chipset:
+Northbridge: Intel 945GC
+Southbridge: Intel IHC7
BIOS Version: , Revision: 0310
BIOS setup options: (example: SATA should be set as "native", "AHCI"; Processor - set EIST to "disabled")
Video: Works poorly (alternative patch with small glitch - found here: http://flibblesan.co.uk/files/mac/GMA900%20Pack%20r2.zip)
Audio: Works out of the box? No, needs alc883 patcher (found here: http://www.mediafire.com/?pgmzp9zcy4j)
LAN: Works out of the box? No, (no solution found other than to buy 3rd part LAN card)
SATA & IDE: Works out of the box? Yes

Processor
Processor Model: Intel Core 2 Duo CPU E4500
Speed: 2.20 GHz
Recognized as what in System Profiler: Recognized correctly

Video Card (if you have integrated and PCI/AGP, use this template twice)
What type of card (PCI Express/AGP/Integrated): Integrated
NVIDIA/ATI/Intel? Intel
Model: Integrated Intel Graphics Media Accelerator 950
Memory: 64MB
Board Manufacturer: ASUS
Patches used: only works in 1280x1024 stretched unless using a patch (found here: http://flibblesan.co.uk/files/mac/GMA900%20Pack%20r2.zip)
QE/CI:
All resolutions available? After patch (patch isn't perfect: to produce effect, rename a folder and look at your screen)

Video Card (if you have integrated and PCI/AGP, use this template twice)
What type of card (PCI Express/AGP/Integrated): PCI Express
NVIDIA/ATI/Intel? NVIDIA
Model: 8600 GT
Memory: 512MB
Board Manufacturer: PNY
Patches used: NVInstaller (found here: http://nvinstaller.com/)
QE/CI:
All resolutions available? After patch

Current OS X Version: 10.5.6 Ideneb 1.4

Desktop: Yes

Prebuilt: No

Install Methods summary: (List all methods tested, check preferred method - the one you are writing about now)
Ideneb 10.5.6 Install. Booted from Serial ATA DVD drive and install onto a single Serial ATA HDD

Does EFI and/or the Vanilla kernel work? (example: partitioned as MBR, EFI v8 + Vanilla Kernel)
Vanilla kernel works ( I selected no particular kernel, so it used the Vanilla kernel). Dunno really about EFI / MBR? Just used a blank HDD which I formatted with the OSX installer. So only one OSX partition

Computer parts and specifications
Motherboard manufacturer: ASUS

Motherboard Model: P5Q Pro

Chipset:
+Northbridge: unknown
+Southbridge: Intel ICH10

BIOS Version: Patched Bios 1613 - 1613_BIOS_Asus_P5Q_PRO_for_MAC_OS_X___all_OS__incl._by_Juzzi..ROM
BIOS setup options: Serial ATA set to AHCI

Video: Works fully. I selected HD3800 series in Ideneb 1.4 install setup. I have a Radeon 3870

Audio: Works. I selected ALC1200 audio codec in Ideneb 1.4 install setup. Be sure to check after install audio is not
set to headphones.

LAN: Didn't work out of the box and I didn't try to fix since I read nobody got it working yet. Instead I installed an old PCI Ethernet Card: 3com 3c905c - TXM. OSX 10.5.6 doesnt recognize this card by default, but DOES have the correct files in IONetWorkingFamily.kext Do the following: open IONetWorkingFamily.kext on windows (you'll see its just a folder with subfolders) goto Contents --> Plugins --> Apple3Com3C90x.kext --> Contents --> and open info.plist with wordpad. Scroll down about halfway till you see something like '<>key PCI 3C90X </key> (notice this is the Ethernet Card identifier) In this section look for <string> 0x900010b7 0x905010b7 etc. </string> Now you have to add the correct string for the 3Com 3c905 ethernet card. It's string is 0x920010b7 Just add this one and save the file. Copy IONetWorkingFamily.kext (not just the info.plist file!) back to your OSX install and use Kexthelper to install the kext again. You can also use OSX86 tools for this and also clear the kext cache (so OSX doesnt copy back the original file next boot) p.s Maybe other Ethernet Cards can get to work this way: check the folders in the .kext. Device ID's can be found with OSX86tools. It shows them a bit differen: For example: 10b7:9200 should be saved in the info.plist file as 0x920010b17 (notice the two groups of characters are switched!)
SATA & IDE: Works out of the box? Serial ATA works. IDE: Does NOT work out of the box and didn't try to get it working

Processor
Processor Model: Intel Core 2 Quad CPU Q9550
Speed: 2.8 GHz but overclocked to 3,4
Recognized as what in System Profiler: Recognized correctly, 4 cores used

Video Card (if you have integrated and PCI/AGP, use this template twice)
What type of card (PCI Express/AGP/Integrated): PCI express
NVIDIA/ATI/Intel? Ati
Model: Radeon HD3870
Memory: 512MB
Board Manufacturer: Sapphire
Patches used: No patches, just selected Radeon 3800 series at Ideneb 1.4 10.5.6 install procedure
All resolutions available? Yes, and dual screen works (test with 2x Dell 24 Inch at 1920x1200)

Other notes
All OS and program updates via Software Update (as of 16 feb. 2009) work OK. There's one wrong update: It shows a firmware update for a Radeon HD2600, but I didnt install that ofcourse. Furthermore the system wont completely shut down (and doesn't restart correctly) A bit inconvenient, but it appears to close OSX ok but just doesnt restart. So i press the reset / power button.

Current OS X Version: Kalyway 10.5.2 intel/amd release

Desktop/Laptop? Desktop

Prebuilt? (Y/N) No

Install Methods summary: Kalyway 10.5.2 intel/amd release- patched with chameleon jmicron fix:
this allows the use of ide DVD.
Kernel: deselect 9.2 sleep, select 9.2 vanilla
Video: All nvidia, or just NVInject-
Audio: apply patch below
Net: marvel yukon- apply patch below for LAN 2
Lastnetkass- or applesmbios-800... running 4gb crucial ballistics 800's



Does EFI and/or the Vanilla kernel work? yes, both- prefer vanilla


Motherboard
Manufacturer: ASUS
Motherboard Model: P5B Deluxe wifi
Chipset: Intel 965 - socket 775
BIOS Version: , Revision: 1238
BIOS setup options: SATA set as AHCI- not IDE
Audio: no: need to patch using Azalia Audio pkg. found here:Azalia
LAN: LAN 1- LAN 2 needs patch. Found here: Mistico86 is the man / WOman
SATA & IDE: works with jmicron applied

Processor
Processor Model: Intel core 2 Duo E8400
Speed: 3.0 ghz
Recognized as what in System Profiler: with vanilla and lastnetkassmbios- 3.0ghz unknown- with applesmbios- 800, 4.3ghz, don't know why- system runs stable...

Video Card
What type of card (PCI Express/AGP/Integrated): PCIe
NVIDIA/ATI/Intel? NVidia
Model: GeForce 7600gt
Memory: 256mb
Board Manufacturer: BFG
Patches used: NVinject, and all nvidia selected / works fine..
QE/CI: both
All resolutions available? yes

Other PCI/PCI-e Components (USB are listed in Other Accessories below)
Wireless/Wired Card (for PCI/PCI-e cards only)
Interface: PCI/PCI-e?
Standard (Wireless only): (example: 801n)
Manufacturer:
Model:
Works? (Y/N, if "Y", list patches)
Patches:

Sound Card (this is for PCI/PCI-e cards only - integrated on motherboard is in motherboard section)
Interface: PCI/PCI-e?
Manufacturer:
Model:
Works? (Y/N, if "Y", list patches)
Patches:

Other Accessories (USB/FIREWIRE)
Type (Webcam, External Sound Card, USB bluetooth dongle, etc.):
Name: Seagate 1.5 Tb external
Manufacturer: Seagate
Works? (Y/N, if "Y", list patches, if needed) Yes

Current OS X Version: 10.5.2

Desktop

Prebuilt? (NO)

Install Methods summary: I only tried Kalyway so far

Does EFI and/or the Vanilla kernel work? EFI works Vanilla not supported

Motherboard
Manufacturer: ASUS
Motherboard Model: M2A-VM HDMI
Chipset: AMD690G SB: ATI600
BIOS setup options: Disable USB legacy Support IMPORTANT OR WILL NOT WORK!!
Audio: Works with ALC883 selected during install
LAN: Works out of the box
SATA & IDE: Very Slow SATA might not even be detected Use THIS: Click to view attachment
USB might not work, Use USB Fix 1.3

Processor
Processor Model: AMD Athelon X2 Dual Core 3600+
Speed: 1.9 GHz
Recognized as what in System Profiler: 1.9 GHz Unknown

Video Card
What type of card: Integrated
ATI
Model: X1250
Memory: SHARED
Board Manufacturer: ATI
Patches used: NONE AVALABLE
QE/CI: NO
All resolutions available? NO 1024x768 ONLY

Video Card
What type of card: PCIex
NVIDIA
Model: 8400GS
Memory: 256MB
Board Manufacturer: NVIDIA
Patches used: Nvject 256
QE/CI: Working
All resolutions available? Yes All

Onboard Firewire Doesn’t work (Firewire GUID 0x000000 IS INVALID!)
Used a PCI Firewire Card detected and fully working

Current OS X Version: 10.5.6


Desktop/Laptop?
Desktop
Prebuilt? (N)

Install Methods summary: XxX 10.5.6 Finalv2, iPC Universal 10.5.6, iDeneb v1.4 10.5.6, iAtkos 5i
Prefer XxX 10.5.6 latest available
Boot commands: (F8) -v –f cpus=1 busratio=24 fsb=133 rd=disk0s2 AFTER boot DVD IDE Distro,
Does EFI and/or the Vanilla kernel work? Partitioned as GUID, EFI v9 + Vanilla Kernel (Updating to Chameleon boot loader) 1TB HDD Samsung (1TB HDD Storage + 250GB Vista Home Premium)

Motherboard
Manufacturer: ASUS
Motherboard Model: Rampage II Extreme
Chipset: X58/ICH10R
BIOS Version: 16 Mb Flash ROM
AMI BIOS, PnP, DMI2.0, WfM2.0, SM BIOS 2.4, ACPI2.0a Multi-Language BIOS Revision: 1204
BIOS setup options: AHCI
Audio: ADI® AD2000B Supreme FX X-Fi Audio Card (Not Working)
LAN: Dual Marvell Yukon 88E8056 Ethernet (Not Working)
SATA & IDE: SATA HDD & IDE DVD/BD (Only! – Please advise if you have another way)
Processor
Processor Model: Intel Core i7 965 Extreme Edition
Speed: 3.2 GHz
Recognized as what in System Profiler: (N/a Unable to use Internet, so I’m using Vista)

Ram
Brand: GEIL
Type: Triple 2GB DDR3 DRAMM
Video Card
What type of card (PCI Express/AGP/Integrated): PCIe
NVIDIA/ATI/Intel: NVIDIA
Model: GTX295
Memory: GDDR3 1792MB 896bit
Board Manufacturer: Zotac
Patches used: (N/a)
QE/CI: (N/a)
All resolutions available? Standard (Not Working)

Sound Card
Interface: PCIe
Manufacturer: Creative
Model: X-Fi Titanium “Fatali1ty” Pro Series (Not Working)


Other Accessories (USB/FIREWIRE)
Type: USB Wireless dongle
Name: DWA-110 (RT73)
Manufacturer: D-Link
Works: (Not Working)
Patches: Use latest Driver for Mac OS from Manufacturers website, Have not tried as of yet
Type: USB HDD
Name: Samsung 500GB
Manufacturer: Imation Apollo

so, if this thread is for 10.5.2..... where is the one for 10.5.6?

Please apologize me for my ignorance.

Prebuilt? Yes
Manufacturer: Gateway
Model: ML6714
Install Methods summary: Wireless and graphics work on fresh install. For sound I used the AppleHDAPatcher v 1.20 with the Sigmatel9250 Linux codec. For battery meter I used the method described by user "SwampFoetus" at the bottom of the comments on: http://www.dailyblogged.com/125/upgrade-yo...-mac-os-x-1055/
Everything else works fine!