first of all, following F.A.Q might be very helpful:
http://netkas.freeflux.net/blog/archive/20...nd-answers.html

RS600 claimed to works with 10.4.10 kalyway in native or vmware.

dell installation very much detailed (good reference example to read first)
http://forum.insanelymac.com/index.php?showtopic=15474


the very BEGIN of R20 installation:

Default installation options
KalyWay 10.4.10 (config image attached)
- Macosx 10.4.10 (cool main system)
- AMD_PATCH_sse3
- kool_patch (all)
- patches (remove CPUManagement, verbose mode)
- drivers (System: SATA support, Azalia audio; Network: Realtek: 8139)
Click to view attachment

South bridge:
00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge
Subsystem: Samsung Electronics Co Ltd Unknown device c511
Flags: bus master, 66MHz, medium devsel, latency 0
PCI ID: 1002:438d
pciclass,060100
Kext recommended: AppleACPILPC.kext from AppleACPIPlatform/plugins/ or AppleLPC.kext
after fixing appropriate PCIID
(needs to be applied for proper interrupts handling - prevents from system freeze)
configuration howto -
http://forum.insanelymac.com/index.php?sho...mp;#entry602128

North bridge:
00:00.0 Host bridge: ATI Technologies Inc Unknown device 7930
Subsystem: Samsung Electronics Co Ltd Unknown device c511
Flags: bus master, 66MHz, medium devsel, latency 64
PCI ID: 1002:7930
pciclass,060000
Kext recommended: ACPI_SMC_PlatformPlugin.kext from
IOPlatformPluginFamily.kext/Contents/PlugIns/
not fixed yet, work is on-going
(needs to be applied for proper interrupts handling/ACPI information handling)
file to fix PCIID - IOPlatformPluginFamily.kext/Contents/PlugIns/ACPI_SMC_PlatformPlugin.kext
configuration howto - http://forum.insanelymac.com/index.php?showtopic=85012

Video:
01:05.0 VGA compatible controller: ATI Technologies Inc Unknown device
7942 (prog-if 00 [VGA])
Subsystem: Samsung Electronics Co Ltd Unknown device c511
Flags: bus master, fast devsel, latency 64, IRQ 19
Memory at d4000000 (64-bit, prefetchable) [size=64M]
Memory at d0100000 (64-bit, non-prefetchable) [size=64K]
I/O ports at 9000 [size=256]
Capabilities: [50] Power Management version 2
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
PCI ID: 1002:7942
pciclass,030000
Kext expected: ATIRadeonX2000.kext (require internal patch and PCIID fix)
AMD 600 series (AMD 690g aka x1250) registry mapping docs
http://www.x.org/docs/AMD/
osx86 work on status:
http://forum.insanelymac.com/index.php?showtopic=74483

PCIExpress:
00:14.4 PCI bridge: ATI Technologies Inc SB600 PCI to PCI Bridge
(prog-if 01 [Subtractive decode])
Flags: bus master, 66MHz, medium devsel, latency 64
Bus: primary=00, secondary=08, subordinate=0a, sec-latency=64
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: d0300000-d03fffff
PCI ID: 1002:4384
pciclass,060401
Kext loaded: IOPCIFamily.kext
default one is working, however may not for ExpressCard slot (verification require)
IOPCCardFamily_chunnan_Tiger_rev2.zip - needs to be tested
http://forum.insanelymac.com/index.php?showtopic=81048

ATA:
00:14.1 IDE interface: ATI Technologies Inc SB600 IDE (prog-if 8a[Master SecP PriP])
Subsystem: Samsung Electronics Co Ltd Unknown device c511
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 17
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at 8420 [size=16]
PCI ID: 1002:438c
pciclass,01018a
SECD@1 <class AppleVIAATAChannel, registered, matched, active, busy 0,
retain count 6>
Kalyway 10.4.10 have support for ATA
ATI aligned driver for parallel ATA - AppleATIIXPATA
http://forum.insanelymac.com/index.php?showtopic=13197

SATA:
00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA (prog-if 01 [AHCI 1.0])
Subsystem: Samsung Electronics Co Ltd Unknown device c511
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
I/O ports at 8438 [size=8]
I/O ports at 8444 [size=4]
I/O ports at 8430 [size=8]
I/O ports at 8440 [size=4]
I/O ports at 8400 [size=16]
Memory at d0004000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [60] Power Management version 2
PCI ID: 1002:4380
pciclass,01018f
Kext loaded: AppleVIAATA.kext
AppleVIAATARoot <class AppleVIAATARoot, !registered, !matched, active, busy 0, retain count 6>
10.4.10 have support for SATA - kool_patch->SB600

ACPI/PowerManagement:

http://www.macdotnub.info/downloads.php

for kernel 8.10.3 (KalyWay 10.4.10) patch not exist yet, check blog:
http://www.macdotnub.info/blog/

osx86 hibernate mode (when battery could be swapped) + detailed modes explanation
http://www.virtualomni.com/?p=281
http://macsimplelife.blogspot.com/2007/11/...nate-issue.html
http://andrewescobar.com/archive/2005/11/1...sleep-your-mac/

hibernate manager
http://www.versiontracker.com/dyn/moreinfo/macosx/28471

Battery indicator:
- may require 10.4.11 osx86 (not clarified yet)
- replace original PowerManagement.bundle from
/System/Library/SystemConfiguration/ with attached one (requre terminal and sudo to be used)
http://forum.insanelymac.com/index.php?showtopic=14912
Click to view attachment

Audio:
00:14.2 Audio device: ATI Technologies Inc SB600 Azalia
Subsystem: Samsung Electronics Co Ltd Unknown device c511
Flags: bus master, slow devsel, latency 64, IRQ 17
Memory at d0000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
PCI ID: 1002:4383
pciclass,040300
Kext loaded: AppleAzaliaController.kext from /AppleAzaliaAudio.kext/Contents/PlugIns/
AppleHDA - Realtek ALC262 attached AppleHDAPatcher with correct PCIID 1002:4383
Click to view attachment
no audioIn/micIn supported yet.
http://forum.insanelymac.com/index.php?showtopic=32859
http://forum.insanelymac.com/index.php?showtopic=37042
attached AppleHDA archive contain ALC262_codec_dump.txt has to be
dropped into AppleHDAPatcherv1.20.app icon before it's execution.

Ethernet:
08:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Samsung Electronics Co Ltd Unknown device c511
Flags: bus master, medium devsel, latency 64, IRQ 16
I/O ports at a000 [size=256]
Memory at d0300000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
PCI ID: 10ec:8139
pciclass,020000
Kext loaded: AppleRTL8139Ethernet.kext from
IONetworkingFamily.kext/Contents/Plugins/
com_apple_driver_RTL8139 <class com_apple_driver_RTL8139, !registered, !matched, active, busy 0, retain count 7>
Kalyway 10.4.10 have support for 8139 (optional driver)
install ethernet before wireless, then fix file, by swapping enX and
interface indexes (0<->1)
/Library/Preferences/SystemConfiguration/NetworkInterfaces.plist

Wireless:
05:00.0 Ethernet controller: Atheros Communications, Inc. Unknown
device 001c (rev 01)
Subsystem: Askey Computer Corp. Unknown device 7108
Flags: bus master, fast devsel, latency 0, IRQ 19
Memory at d0200000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Capabilities: [60] Express Legacy Endpoint IRQ 0
Capabilities: [90] MSI-X: Enable- Mask- TabSize=1
PCI ID: 168c:001c
pciclass,020000
Kext loaded: appleairport.kext
AirPort_Athr5424ab <class AirPort_Athr5424ab, registered, matched, active, busy 0, retain count 10>
appleairport 2007-04 update download from here:
http://www.apple.com/support/downloads/air...ate2007004.html
kext needs to be extracted from .mpkg and installed manually
attached due to possible future discovery difficulties
http://forum.insanelymac.com/index.php?sho...ireless+atheros
Click to view attachment

Bluetooth:
not integrated
external:
any Cambridge Radio/Broadcom based USB/PCIe card chipset (Cambridge Radio preferable)

HSDPA/EDGE/GPRS:
not integrated
external:
Merlin XU870 3G HSDPA 3.6/7.2 Mbps ExpressCard
http://www.novatelwireless.com/support/mer...u870-apple.html

anybody with Samsung R20? we'll need more testers!

Hello I have a samsung R20

I am going to try this as soon as i get a spare internal Harddrive.
Can i just confirm you managed to get the wireless card to work on this.

Once i get it working i may try to get it to dual boot with vista if possible or to run of a CF card.

one more thing how is performance of os x86 on the R20, would you say it is equal to similar specified macbook.

Hello i need some help here.

I am new to macs.

I have followed the installer as pictured on reboot i am stuck with "still waiting for root device".

I am installing this on the 4th partition
1st being the recovery partition
2nd vista boot partition
3rd vista D drive
4th is os x

From other threads i have read i have gathered that it is a problem with my harddrive controller but i have no idea how to fix this. Can someone point me in the right direction.

yes, WIFI is working fine after Apple Wireless update (but you'll need to install kext manually).
there is no CF slot in R20, it's ExpressCard slot (can't insert PCMCIA adapter there)
you can boot from USB, it's working find with R20 bios

I have kalyway 10.4.10 working on the R20

I had to add the correct device id and vendor ID to AppleVIAATA.kext and AppleACHIPort.kext to get os x to recognize my hard drive.

System boots fine and wireless works out of the box.
I have not tested sound yet.
Tried to update graphics driver as per guide but after the step2 i booted into osx and the display was all messed up.
I have just replaced the kext file with the original before edit and am hoping i will return to my grainy display and begin troubleshooting again.

installed and functioning
only after editing the id for the sata controller as it was not detecting my hard drive
Wifi works out the box#
Sound works after patch ole2 supplied
After applying the kext files for video upon reboot screen is full of artifacts and unusable

i entered my ids in this format 0x79421002
as this matched the format of the entries already listed in the kext files.
i am going to redit the plsit files leaving only my pciid in the hope this fixes the issues

I have managed to get the sound working
and impove my xbench score by applying the southbridge patch
still no luck with Graphics card and i get panic error on boot with north bridge patch
im going to try the sleep patch and just force resolution from com.apple.boot.plist file
for now till i can figure out how to fix graphics card

Does any one know how to get the trackpad scroll function to work

no joy with graphics yet
could it be possible that the garbled screen could be down to the timings and other settings in the plist.

the problem is i dont have a clue where in the plits these values are or what they should be.
i mite try katana as i only want the correct resolution but i have reinstalled my system so many times

southbridge fix causes AppleLPC::start - RCBA not enabled error on boot

i can not find any reference to what this means, but the system boots fine. After southbridge fix on 2nd boot sound is disabled.

battery indicator works fine, sound and wifi worked without any addtional tweaks needed.

ACPI/PowerManagement deafult install coruptted my OS X86 and uninstaller did not work. may try again but install kext only.

My main issue is i can not get sleep mode to function.
i can live without everything else but i need sleep

has any one else experienced this issue

Hello, I don't know why I find this topic too late like this... This topic will be awsome one to me.

I have Samsung R20 Plus (NT-R20F/180)
My spec is completely same as you guys'.

Unfortunately, I don't have much time in this week... I am gonna try this great solution in this weekend and I'm gonna feedback the result!
Thanks and I am sorry about not be able to help you until weekend.

P/S. I am korean user so I cannot use English as well as you do. If you don't understand what I am saying, please ask me like this. "What did you mean? I don't understand because of your English skill."

welcome on board Nucleus
the port on R20 is not finished yet, so you didn't missed much
post your results and get ready for future QA activities!

I am trying to natively install tiger with KALY 10.4.10 through VMware.

I'll feedback about the result until tommorow's night~

********************

EDITADO:
(Solucionado) ...he logrado agregar el ID de mi SATA y arranca sin problemas.
Saludos.

(Now I also have kalyway 10.4.10 working on the R20)

--maelva

It's late for me now but I got samsung r20 and I will try 2 install Mac OS X on my comp

My Specs

Samsung r20 NP-R20 F001
Intel Pentium Dual core 1.73Ghz
160GB HDD
Ati x1250 vga

---------------------------------------------------------------------------
Result:

Working on 10.5.1 but doesnt work with 10.4.10 Kalyway.

My comp hang at :
.......
itunephone.device
still waiting for root device
.......
(i will add image later)

any ideal ?

HI ole2,thanks for posting. Your thread has been very useful in installing my Samsung R20 (NP-R20). Thanks a lot. Goodluck!


Regards,
kniki123
Placement financier