defiacnenl
May 3 2008, 09:11 PM
QUOTE (Andreei @ May 1 2008, 10:24 AM)
Yes i try that, but i still get it?
I but it usb memory stik that bootefi folder and i boot from dvd.
I had asus p5k se morherboard
im succesfully runnin osx 10.5.2 on Asus P5K (With KaylwayInstall)
Everything onboard works
Audio -> Yep , select alc883 in installer
Lan -> Yep , install attansicL1 driver after install..
GFX -> X1950 Pro -> Dual Monitor 19" CI/QE Working
(Thnx Bronya)
And its on Dual boot with WindowsXP for Gaming (Using the darwin bootloader, this is easy 1-2-3 dualboot)
macmac_sullivan
May 4 2008, 02:17 AM
Good day people. Another new-bie bugging here. I install Kalyway's DVD and everything works fine during the installation. I reboot then the WELCOME movie popped-out. Clear movie, great sound.. then it proceed to information collection & registration.After doing so, it should go on login window app right...? the thing is, it stuck there. I tried to safeboot and the login windows manager came-out. But everytime I try to choose a user, every goes mambo-jambo! (stucked in the blue screen with the rotating wheel cursor)I tried to wait for a while but after several minutes, hdd activities goes out.What do you think the problem here, guys?and oh! the specs where i installed 10.5 wereIntel Celeron D (3.08 Ghz)2 gig Kingston DDR2 RAM256 MB Graphics Card (Nvidia FX 5500)10 Gig HDD (spare) / 200 Gig HDD (for windows -- spare)I had previously installed JaS OS 10.4.8 there and it worked fine, as in no problems.I cannot see any reason why it stop on user loading blah blah blah..Any help would be appreciated!Thanks in advance!
QUOTE (kaly @ Dec 20 2007, 11:54 PM)
KALYWAY LEOPARD 10.5.1 intel SSE2 and SSE3 Only (with 512 MB of RAM)!!! efi v8Please stop endlessly re-posting the following questions AND READ THE THREAD (or at least do a thread search)All IchX and Jmicron compatible !!!but still problem with ide dvdrom on jmicron controller!
Read carefully !!! 
designed and repacked by KALYWAY! additionnal scripting and customs drivers by DUNE !you can try vanilla kernel at dvd boot ! just type vanilla after f8 !!!you can use Diskutility to format the whole hd as you want ( guid or mbr)! then select custom install !!!this installer will set hd bootable for you !
just have to select boot guid or boot mbr depending on what partition map you have chosen before with diskutility !
CAUTION for mbr choice: we advise you to use an empty disk but if you have no other choice than installing Leo on a disk where windows is already installed, you should be aware of that the installer will active the leo partition, so to be able to boot again on your windows,you should install a bootloader (eg. Grub) , or you can active back the windows partition with fdisk and use chain0 (if your leo partition is under the 200gb of the HD).
FIXES include : x11 update (resolve issue wit gimp and some x11 app! ; directoryservices ; otools (resolve packages maker crashes)
Some drivers extras setting are present (Only select one driver for each section!! ) sleep kernel 9.1 install by default ! intel sse2 systemvideo driversaudio driversnetwork driversVanilla kernel and acpi vanilla (wit reboot fix and ps2 support) ( you must select both of them)
ACPIPlatform with new PS2Fix (PS2 KB/USB Mouse) ACPIPlatform with new PS2Fix (PS2 KB/USB Mouse)bootloader guid or mbr
Additionnals applications ! fairmount (dvd decript that work with vlc)VLC (video players for divx and various format)perian codec for quicktime (divx and various unsupported quicktime formats)Better zip (archive utility)Pacifist (pkg extractor and installer)kexthelper ( kext installer for noobz)transmission ( light weight torrent client)Google notifier (menubar notifier for your gmail account)PPF-O-Matic ( utility for applying ppf patch)stuffit expander ( for extract sit rar and zip archives)Change finder ( make visible or invisible system files)Colloquy (irc client)Solarseek (soulseek client)i have make a restore app ! for
Restore_Factory_Desktop_finder_settingsRestore_Factory_Desktop_Finder_settings (default background,icons,dock)for change orange colour in window finder! right click on orange colour then Show view options and select background white !! use by default !new users accounts will be virgin ! CAN BE USED ON ALL 10.5.x DISTRO !!!it's all !!
KALYWAY DVD DONATIONS (contribute to leo osx86 developpement dvd)MD5 for KALYWAY_LEO_10.5.1_intell_SSE2_SSE3.zip aff692cfe4daaae471f528974f5bac07
MD5 for kalyway_leo_10.5.1.iso f8546bde2a5b3c7dff47f2aab31862a9
THANKS TO ALL OSX86 COMMUNITY and TEAM OF HACKINTOSH !!IRC irc.osx86.hu #Kalyway.DVDSpecials thanks to netkas , def , turbo ; asap , jccool ,joblo,dan , rofl , joe75 , kabyl , Chiva4ry and all the others !!!
Please stop endlessly re-posting the following questions AND READ THE THREAD (or at least do a thread search)To Apple:Think of this as of a demo version and as of a free marketing campaign. Therefore, let it beENJOY ! if you love MacOSX think to buy it !!!This DVD should only be used to preview Mac OS X Leopard. If you really like Mac OS X Leopard and you want to use it,you should get a real Mac. If buying a real Mac is too much, you can, at least, buy a license for Mac OS X Leopard. Good day people. Another new-bie bugging here. I install Kalyway's DVD and everything works fine during the installation. I reboot then the WELCOME movie popped-out. Clear movie, great sound.. then it proceed to information collection & registration. After doing so, it should go on login window app right...? the thing is, it stuck there. I tried to safeboot and the login windows manager came-out. But everytime I try to choose a user, every goes mambo-jambo! (stucked in the blue screen with the rotating wheel cursor) I tried to wait for a while but after several minutes, hdd activities goes out. What do you think the problem here, guys? and oh! the specs where i installed 10.5 were Intel Celeron D (3.08 Ghz) 2 gig Kingston DDR2 RAM 256 MB Graphics Card (Nvidia FX 5500) 10 Gig HDD (spare) / 200 Gig HDD (for windows -- spare) I had previously installed JaS OS 10.4.8 there and it worked fine, as in no problems. I cannot see any reason why it stop on user loading blah blah blah.. Any help would be appreciated! Thanks in advance!
mindwar
May 5 2008, 06:26 PM
I'm looking to install this on an PATA IDE drive connected to a jmicron controller (asus p5b). as I've gone through the thread it seems that a sata dvd drive is required for instalation but will i be able to use the pata hdd to install to & boot?
thanks
neil43
May 6 2008, 01:28 PM
Happy Camper (now).
I had struggled with OSX86 installs and gave up a few times.
Then I put together a ECS 945GCT-M/1333 V3.0 motherboard with an E6750 core 2 duo cpu, IDE DVD drive and SATA hard disk. KALWAY 10.5.1 installed and ran very well with only the audio not working. Tried to patch it but resorted to an external USB audio solution. This machine works well.
I found a good buy on a Q6600 quad core cpu, selected a Gigabyte GA-P35-DS3L rev 2 motheboard, 4GBs of DDR2, EVGA 7600 video card, IDE DVD drive and SATA hard drive(s). About $600 invested over time on the system.
KALWAY 10.5.1 installed and EVERYTHING works including audio!
So I reinstalled on a 160GB SATA drive, dual boot, with KALWAY OSX on the first partition and XP-SP3 on the second. I use Darwin as the boot loader.
As a note, I used the Disk Utility from a DVD boot to partition the drive, MBR, partition 1 as MAC OS Extended (journaled), partition 2 as MS-DOS FAT 32.
Then installed XP to partition 2 and selected NTFS format. Then rebooted the the KALWAY DVD and installed OSX to partition 1.
The point of my post is this, given compatible hardware most should be able to have a good experiece. Check the HCL listings.
Neil.
Juliano Franz
May 9 2008, 03:29 PM
Hello!
Hmmm i just canīt install OSx86 on my notebook.
I have a Dell XPS m1730
With
Intel Matrix Storage RAID0 ICH8-M
4GB Ram
Intel core 2 duo extreme x7900
2x Nvidia 8700M
kalyway 10.5.1_leo iso
Problems that iīve encountered:
1st random kernels panic at install DVD boot "you need to reestart you computer"
2nd At disk utility i see only one partition that does not exist (!?!)
I have 4 partions on RAID0
one created on the vista instalation NTFS
3 created at openSuse instaltion 2 ext3 and 1 FAT (for the MAC)
in that order, all of them primary
Any ideia?
Tks!
Puneit Singh
May 11 2008, 05:21 AM
Hi
I have successfully installed Kalyway 10.5.1 on an IBM Thinkpad R52 1847 series. The machine has an ATI x300 graphics card and it seems to me that its working fine. During the install, I had chosen the SSE2 option and in the Boot options I chose MBR.
The thinkpad has an Intel 2200 BG wireless card which is not working and thus I am not able to test the internet.
The machine is a dual boot with Ubuntu 8.04. The grub was removed during the OSx86 install and I had reintsall it using Ubuntu Live CD.
Thats my success story so far
martinnw
May 12 2008, 05:17 PM
Hi!
I've installed Kalyway 10.5.1 on my INTEL CORE 2 DUO E6750 with ASUS P5K SE P35 motherboard. I've put the installation on an external-hdd and used GUID as partition. OsX86 is the only thing on the hd. The disc number is 2 and the partition with osx86 seem to be 2 also.
The problem is that I can only boot osx86 with the dvd otherways I got a blinking cursor. To boot the osx I use rd=disk2s2, it works but I want to boot without the CD, how can I do this?
Thanks for your help!
warrior13-06
May 13 2008, 02:46 AM
hi.
I installed the kalyway 10.5.1 on my Sony vaio. It says that it had a successful install but when I go to reboot after I just get a blinking cursor and nothing happens.
I have a
Sony vaio
Intel P4 ht 3.20GHz processor with SSE2 SSE3
1.5 GB ram
300 GB SATA HDD with 2 partitions (1st is 15GB for leopard; 2nd is 285GB for vista)
I think I'm confused on what to select in the customize section before I install
when I installed it the first time I selected:
vanilla kernel
mbr
If some one could help me with what in doing wrong it would be greatly appreciated.
Xterror
May 13 2008, 05:20 AM
Hi,
I installed kalyway 10.5.1 then got sound and video to work. after while installing World of warcraft I started getting RESTART BY HOLDING POWER BUTTON panics. Then I installed 10.5.2 thinking it might fix the panic but didnt. So I started under safe mode and it was able to take the install without the RESTART panic. I would sometimes get the RESTART panic while trying to install other software too. I installed Roxio Toast last night and didnt get the panic while installing, but I get the panic while its burning a DVD. Im new to all this hakintosh thing and I was wondering if you guys knew what may be causing this, or what you guys need me to do so you can get a better idea one whats causing all these RESTART panics. I would burn in safe mode if I could, but it wont. Also now that Warcraft is up and running, if i use the video recording option, I get the RESTART panic. My specs are P35-DS3L, 3.0ghz Intel Core 2 duo, 4gb DDR2 800mhz Gskill , 8800GTS 320mb, SATA 300gb, Samsung DVDRW. Used Kalyway 10.5.1 to install and updated to kalyway 10.5.2. LAN,Sound, Video works. Used the NVinject for video drivers. Please help. Let me know if a retail Leopard will help the issue. Im willing to spend the money.
Thanks
mazataza
May 13 2008, 08:22 AM
im succesfully runnin osx 10.5.2 on Asus P5K (With KaylwayInstall)
every thing work perfectly and it run now for 3 days without crash. this is wonderfull.
I am just wonder how to find is my kernel only 32-bit system or 64-bit system. Leopard come in 2 version one is 32-bit and 64-bit. in 64-bit no need to use PAE mode in intel CPU.
I have tried java 64 bit, but no application can run on it. so Java application on 32 are limited to 2000 Gb.
megamachine
May 13 2008, 02:01 PM
danielp420
May 14 2008, 10:49 PM
well it turns out that my computer does have a DVD burner so i burned Kalyway_10.5.2_DVD_Intel_Amd.iso on toast 9 titanium to a DVD+R at 2x speed
but when i put the dvd in and reboot from the dvd to install kalyway it goes to single user mode i believe then it runs some lines of code on a black screen
then it says ERROR firewire cannot be found or something with firewire is not working right
then it says some stuff about USB then it just freezes.
is this file only for people who have mac software on there pc, or is it for real macintosh's
and i have a macintosh core 2 duo 17" with tiger installed
i bought it in 2006
if you have any ideas\help for me please leave them
thanks
Toaster777
May 16 2008, 10:20 PM
QUOTE (igotjshoe @ Dec 21 2007, 02:32 AM)
trying to install on a thinkcentre ibm ive been able to install toh an other kalaway disc this starts like the others but then the cursor just flashes an flashes then reboots has this happened to anyone else any help is needed
Hey, if you have a minute to send me a PM, or post here, could you give me some pointers on how you got your system working? I've had a helluva time and my system is very similar to yours. I have a Pavilion Elite M9150F, and I'm trying to install onto my second hard drive. I've tried Kalyway 10.5.2, iATKOS v1.0ir2 and V2.0i, Leo4All v2 and v3 and have had no luck. With Leo4All v3 I was able to get the install done using the cpus=1 flag, but had no luck booting once the install was completed.
If you could give me some tips on what platform to use and how you got it to work on your system that would be greatly appreciated. My specs are as follows:
Processor:
Core 2 Quad Q6600 (K) 2.4 GHz (95W)
- 1066 MHz front side bus
- Socket 775
Chipset:
Intel G33 Express
Motherboard:
Manufacturer: Asus
Motherboard Name: IPIBL-LBHP/Compaq motherboard name: Benicia-GL8E
Memory:
3GB PC-5300 667MHz Hard Drive:
720 GB (2 x 360) SATA 3G (3.0 Gb/sec)
Optical Drive 1:
16x Dual Layer DVD+/- RW with LightScribe
Optical Drive 2:
2.4x HD DVD-ROM drive
Wireless LAN 802.11 b/g
256MB DDR2 nVidia GeForce 8500GT
Hauppage TV tuner card with FM tuner
Integrated High Definition Audio:
Realtek ALC 888S chipset
Integrated 10/100/1000 Base-T networking interface
15-In-One Memory Card Reader
Firewire and USB 2.0 ports
HP wireless USB keyboard and Mouse
USB infrared remote
vitaliy.ur
May 19 2008, 06:50 PM
Sorry, where can I get this DVD ISO?
Thanks.
Nugraha
May 20 2008, 06:07 AM
hello there kaly...
im newbie here... i would like to ask you is it ok if i install on the kalyway 10.5.2 intel amd sse2 sse3 DVD without the kalyway 10.5.1 ?? thnks before...
really apreciate it...
Nugraha
Nugraha
May 20 2008, 07:54 AM
anybody know where i can download Kalway 10.5.1 intel amd sse2 sse3 ?
thnks in advance
leontyr
May 20 2008, 09:37 PM
Hi
I've downloaded "kalyway leopard 10 5 2 dvd intel amd 4122511 tpb".
Booted from DVD but hanged straight after the screen shows:
"got _PSS data for cpu index 2, but expected index n ... acpi_smc_platformplugin
......
Darwin kernel version 9.2.0:
Made by toh:xnu-1228/build/obj/release_i386"
What should I do?
Is there any step by step guide for this installation?
Help please!!!
retrocade
May 21 2008, 05:29 PM
Can someone tell me what EFI is and does my laptop have to support it for this release?
I have a HP Pavillion DV9010US.
I looked on the HP site but couldnt find any info on EFI.
Thanks
Monkey Dust
May 23 2008, 09:51 PM
i cant get my pc to boot up from the dvd it just skips to booting ubuntu.
tried burning at lower speeds.
im using sony dvd-r's at 1x and 4x (tried it a few times)
burning using a macbook pro and a superdrive. abd the burn app.
any ideas?
tried going into the bios and telling it to boot form the dvd but it wont.
installed ubuntu from cd using same drive.
iJeff
May 25 2008, 01:37 AM
Hi there,
I have recently had to re-install kalyway's 10.5.1 and that was not a problem at all, it works fine on my machine. but since the re-install I can only boot into this if the dvd is in my machine. I have read through the forum and have done a re-install and taken the disc out before re-install but that does not make a difference. I do not really know why this is happening, because I have done it the exact same way before and there where no problems.
my specs are:
Pentium 4 3.0Ghz HT
2GB DDR400 Ram
80GB 7200RPM HDD.
However all the hardware works fine on my system. I have formatted my HDD to be MBR and selected that option in the install and I also tried to do it with GUID (witht he correct formatting) but no luck. I think I have done my homework but am have hit a brick wall. (Please don't let your cat shoot me Dune
)
Any Help??
jedi4351
May 25 2008, 01:45 AM
does kalyway sell DVD's of it if i dont want to download and burn it
the first post is quite confusing
kingofthe440
May 27 2008, 01:23 AM
I try to install but on the first screen that shows the apple logo and the spinning circle everything goes fine untill about 10 minutes later the spinning circle freezes and the screen stays the same for hours, i left it overnight and it stayed on the same screen. Please help!
I have a 3.00 ghz pentium 4 processor which supports MMX, SSE, SSE2, SSE3
A 256 MB, DDR, PCI Video Card
I have 1.5 GB of Ram
I have 2 seagate hard disks, one 320 gb's and one 200 gbs (The 200 gb one is the one im trying to install Kalaway on)
I have a Intel D915GAG Motherboard
I have a standard Pioneer dvd burner
hanswurst
May 27 2008, 01:16 PM
Use F8 (I think) to enter bootoptions. Type -v and have a look at the consoleoutput and post some details.
I have problems with the sleepmode. I could sent my laptop to sleep, but it wakes up imediatly. Seems if something sends a wake up signal after reaching in sleepmode.
I have used the standard sleep-kernel.
Config:
http://wiki.osx86project.org/wiki/index.ph...2F_LEADER_W230NAnd litte problems I have with
USB WLAN card: RTL 8187. After ejecting USBs stick, the WLAN card is ejected, too
Everything else works fine. Any suggestions to fix the problems?
Yours Simon
looper
May 30 2008, 04:33 AM
Just sharing experience with installing this release.
Had a lot of trouble with either the installer freezing during the last minute of the install, or the "blinking cursor" upon reboot.
The following combination of settings finally worked for my particular machine (Intel GNTLKR/D930)
In the BIOS under drive settings: AHCI - ON
When formatting the harddrive with disk utility, choose the MBR partition scheme.
When customizing the install, don't use the vanilla kernel, and do use the MBR bootloader.
Also I used "Gparted" - a great linux partition editor, to check that my disk had it's flag set to bootable.
GREAT work KALY.
Thanks
PS just downloaded the 10.5.2 DVD, will report how that works out (or doesn't)
kingofthe440
Jun 1 2008, 04:22 PM
For the details of what it hangs up on is: "display : family specific matching fails" without the quotation marks
Daurora2008
Jun 4 2008, 01:04 AM
Hi. I installed Mac OS X Leopard via Kalaway's install disc. I have everything fixed but ethernet. I am just lost with one issue. I have Kalaway's Leopard 10.5.1 release and there is no battery indicator. I have a Gateway laptop with RTL8187B wireless, Celeron M processor, and Marvell Yukon ethernet. I just need to resolve my battery indicator problem. Then I am good. Also, what might happen with an update? Before I messed up the IONetworkingFamily.kext and updated and found that in System Preferences I could not open Network. I reinstalled 10.5.1 and now have some intentions of upgrading again but this time my IONetworkingFamily.kext is okay. I only want to know if there is an answer to the two questions. My hardware has been just one big problem after another. Thank you for any support you may offer.
Doc_Gonzo
Jun 5 2008, 07:08 PM
going from Kalyway 10.4 tiger to Kalyway 10.5.2 leopard, my Install is hanging at same spot repeatedly.
Log File reads:
"localhost /Volumes/System/private/tmp/scripts.i0LG/./postinstall[1833]: 2008-06-05 10:54:14.600 netInfoToDS[1843:1a03] (Sleep) prevent machine to sleep
localhost /Volumes/System/private/tmp/scripts.i0LG/./postinstall[1833]: 2008-06-05 10:54:15.285 netInfoToDS[1843:1a03] tmp dir path = /tmp
localhost installdb[288]: done. (17.354u + 10.965s)"
it freezes up at this point and just sits there indefinitely. I have tried choosing just the vanilla kernel but this has not solved the issue.
Any ideas??
Xstasyen
Jun 10 2008, 08:21 AM
Hello,
Will this work on my:
MB: Asus Maximus Extreme (I got the Jmicron controller)
CPU: Intel Q6600 2.4Ghz Quad-Core
RAM: 4GB 1333mhz DDR3
VC: 2 x Nvidia 9800GX2
HDD: 6 x WDC 1TB HDD's
Asus WL-130N Wireless PCI Card
Thank you for answers.
snpri3
Jun 16 2008, 09:47 PM
ok i got to the installation of MAC i know exciting but this is where i hit a dead end. after i select a hardrive which i partitioned i get this error
" The installer could not create the folder "/Volumes/Mac OSX/basesystem.200r.esumg something along those lines and it tells me to restart and try again but i tried and same thing happens, could this be a currupt file or just my computer.?
anyone get this problem or know how to fix it please...
thomasgilling
Jun 17 2008, 06:37 PM
year i got the stupid file and it has this rubbish with it called DS STORE or something like that and when I burn the .ico it does not work on reboot!
kteljenkins
Jun 18 2008, 01:19 AM
I've got a model almost exactly like this, m9040n, and I've been having the same problems:
QUOTE (Toaster777 @ May 16 2008, 10:20 PM)
Hey, if you have a minute to send me a PM, or post here, could you give me some pointers on how you got your system working? I've had a helluva time and my system is very similar to yours. I have a Pavilion Elite M9150F, and I'm trying to install onto my second hard drive. I've tried Kalyway 10.5.2, iATKOS v1.0ir2 and V2.0i, Leo4All v2 and v3 and have had no luck. With Leo4All v3 I was able to get the install done using the cpus=1 flag, but had no luck booting once the install was completed.
If you could give me some tips on what platform to use and how you got it to work on your system that would be greatly appreciated. My specs are as follows:
Processor:
Core 2 Quad Q6600 (K) 2.4 GHz (95W)
- 1066 MHz front side bus
- Socket 775
Chipset:
Intel G33 Express
Motherboard:
Manufacturer: Asus
Motherboard Name: IPIBL-LBHP/Compaq motherboard name: Benicia-GL8E
Memory:
3GB PC-5300 667MHz Hard Drive:
720 GB (2 x 360) SATA 3G (3.0 Gb/sec)
yboard and Mouse
USB infrared remote
I'm trying really hard to get this thing, to work, reading through the forums during work to find install tips, and trying stuff out in the evenings and weekends.
Now specific to this install, I get no matter what configuration of flags at the dvd install stage, it reboots itself after rushing through some text loading. Even when I use -v I can't see the final panic message, since it forces a re-boot.
I have tried it with the bios set both IDE/AHCI for the ATA controller, with the XD execute bit on and off, and the virtualization on and off, nothing seems to make a difference. If anybody with a similar configuration would like to share some advice to their successes or frustrations, I'd be surely appreciative. I'm attempting to get this, and the kalyway 10.5.2 to work, and they each have their own specific panic.
Kenny
hobes270
Jun 20 2008, 11:49 PM
Where can you download Kalyway 10.5.1 DVD ISO and Kalyway 10.5.2 Combo Updater? I have tried torrents. And how do you update to 10.5.3?
dreezone
Jun 24 2008, 07:07 PM
I have a Compac Presario V2000
When I boot from the Kalyway DVD it gets stuck at the following prompt.
Kernel Version:
Darwin Kernel Version 9.2.0 Sun Mar 200:11:08 SCT2008; Made by TOH:xnu-1228/BUILD/obj/RELEASE_I386
Could you please tell me the reason and how to solve this.
Thankx in advance.
Juures
Jun 30 2008, 12:20 PM
I need a password for this rar: OSX_10.5.1_(Leopard)_x86_Intel_SSE2_-_SSE3_-_Kalyway.rar (2996341940 bytes) help would be much appreciated. Thank you.
camf33
Jun 30 2008, 09:57 PM
Sup Buddy.
Well good news for you! I have that same board and it worked sweetly with Kalyway 10.5.2
Just make sure you do a default install and don't select anything..I mean "NOTHING" at all extra as customize.
Let me know what's up.
Good Luck!
trevorw
Jul 1 2008, 02:58 PM
Can someone tell me the secret sauce for installing Kaly on a Dell D620? I've just read through 129 forum pages with no luck.
There is no BIOS switch for ACHI (no way to affect harddrive config at all) on the D620 so I am stuck with the blinking error: System config file '/com.apple.Boot.plist' not found
I can't get past it.
I am very sad.
Thanks for any help.
Trevor
Rene204
Jul 1 2008, 03:20 PM
QUOTE (trevorw @ Jul 1 2008, 03:58 PM)
Can someone tell me the secret sauce for installing Kaly on a Dell D620? I've just read through 129 forum pages with no luck.
There is no BIOS switch for ACHI (no way to affect harddrive config at all) on the D620 so I am stuck with the blinking error: System config file '/com.apple.Boot.plist' not found
Try to set the partition, you have installed the leopard set as ACTIVE.
Have a look hier for a guide to set the partition as active.. there are some of this guides here...
still had the same problems some times before.. but now all is working fine...
trevorw
Jul 1 2008, 05:48 PM
"Try to set the partition, you have installed the leopard set as ACTIVE."
Thanks!
OK, found a page that walked me through setting the partition active and I tried several times on different partitions and still the same blinking error.
I am more sad now than I was before.
I may just sit down and cry after all...
dragosdnb
Jul 6 2008, 02:53 PM
I have a Hp Pavilion DV 8000
Intel Centrino Duo
Geforce go 7600
1.5 gb ram
Now, my problem is : the installer starts, goes about 1/3 of the way through and then it comes up with the error "some files could not be installed to /volume/data" please reboot and try installing again. I've done this like 10 times and all it does is it copies like 1.69gb of data to that drive and then it stops, what am i doing wrong?
iLatino
Jul 8 2008, 05:23 AM
new user here every time i try to boot i get this
Darwin Kernel Version 9.2.0: Sun Mar 2 00:11:00 SCT 2008; made by ToH:xnu-1228/BUILD/obj/RELEASE_I386
does anyone what i need to do thanks in advance
txmojo
Jul 14 2008, 05:27 PM
Most times I've seen the Boot.plist error was because I had left the DVD in the drive when rebooting...make sure it is not in the drive when you boot.
komar_kzy
Jul 14 2008, 06:01 PM
Im having a strange issue here.
When I try to boot from DVD - first time run - to install i get something like that
and after taping Enter something like this
what the .. ?
Can anyone help please?
My config is: E6300; Asus p5w dh deluxe, Seagate 500gb 32mb sata II (not yet partitioned), Samsung 250GB (Win_xp), NEC 3500A IDE DVD-RW;
kynkst3r
Jul 15 2008, 12:40 AM
Through all my struggles, mistakes, and heartache, I've finally succeeded into the osx86 community. Thanks to Kalyway and the team for bringing us this, and to everyone here for making it possible to share information and guiding me to the end.
Villain
Jul 15 2008, 05:31 PM
QUOTE (vyx @ Mar 31 2008, 09:33 PM)
I tried today to install, but it hangs at the apple logo after loading darwin. It does nothing after this. Just wondering if the image I used was ok, because in Windows when I check the properties of the disk it only has 192kb on it, while the image was 4.7 gb. When I burned the DVD it wrote all 4.7gb. I used a brand new Hard drive to install. I put in my regular hard drive and it gave me command line before it loaded up darwin, and then hangs with the apple logo again.
I have this exact same problem. The disc is burned properly, I know that. My computer is Acer Aspire 5670, specs:
- ATI Mobility Radeon X1600
- Intel Centrino Duo
- 1 Gb DDR2 RAM
So as far as I can tell my system should be ok, right? I have made my computer to boot from DVD, obviously. If you need more, ask. You can't find specs for this computer via Google, it's modified for my usage few years ago.
Aumi Khan
Jul 16 2008, 06:25 PM
hi, i've downloaded kalyway 10.5.2 iso and i've burned it. but i vcan not install it. it stuck at the first place. after booting it shows a black page with a lot of white text and stuck.
My pc configuration is
Intel core2duo e6400
Intel DG965RY motherboard
1.5GB RAM
and other things are built in.
Plz help me.
SlipperyJim
Jul 19 2008, 05:45 AM
does anyone kno what this means or how to get around it???
The installer can not validate the contents of the 'automator' package. Contact the software manufacturer and try installing again.
i am trying to istall Kalyway Leo 10.5.1.
my laptop is an old intel centrino 1.73 cpu
geforce go6600 128mb
1gb ram
dual boot works fine...(acronis os selector)
tiger installs fine
dvd boots fine
burnt this copy of leo on Tiger OS at 4x speed using -r dvd.
installed using sse2 option ONLY.
looked all over forums, didnt see anyone having the same issue
any help would be appreciated, thanks
domdave63
Jul 23 2008, 02:26 AM
Fantastic, fantastic, fantastic...
While I have a Macbook, I wanted a headless stand-alone box controlled with VNC to author DVDs, I like the iDVD menus ;-)
Kalyway 10.5.2 +dual Pentium, Gigabyte m/b + Asus 138 wifi card = perfect, fast & (touch wood) stable.
All for NZ$400, and legit as I have multi Leopard & iLife licences. Cheapest Mac Mini = NZ$1000 and benchmarks slower. I have added a 2nd HDD for an alternate XP boot.
All in all a happy camper and all hail Kaly's work.
CaptRage
Jul 25 2008, 02:56 AM
There is a lot of great info here, but too much to read. I have read through a bunch of the pages but can't seem to find what I am looking for.
I am having problems getting this installed. I had no trouble burning the dvd (I think that it is good)
I have a Dell PowerEdge SC430 server that I am trying to put this on. There are not a lot of BIOS settings that I can change. I upgraded the BIOS to the newest version A04 without any luck.
When I boot up I get the message to press a key to boot from DVD or hit F8. I press a key and within a minute I get an error:
EBIOS read Error: Error 0x04
Block 8939856 Sectors 64
This shows up a few times then it it has a different block.
After a few times it goes back to saying press a key to boot from DVD or hit F8. I try F8 and it shows the drive and partition, if I select that it does the same thing. At the boot: I have tried 'vanilla' '-s' '-x' and I get the same thing (with different block numbers).
I did let it sit once with those errors coming up then I eventually got another error saying something like Com.apple.boot.plist not found.
Does anyone know how to fix this? Has it been successfully put on this mobo? Any help is appreciated.
Thanks!
Pablo(2)
Jul 25 2008, 01:18 PM
Hi CaptRage,
I'm guessing that your server has a Raid configuration of some type. I have a Dell XPS Gen4 PC and had similar problems. Try the following: 1) If you have a laptop ot another PC that does NOT have a Raid configuration, see if the DVD will "boot" correctly. If so, then you know your DVD is OK. 2) If your DVD is OK, then break your Raid Array and try again.
Hope this helps.
gal1111
Jul 25 2008, 09:11 PM
Hi everyone,
I have a problem putting Mac os x Leopard on my Intel PC.
I installed it successfully ("Install Succeeded"), and then it resarts. Every tutorial says that after the restart, the computer should boot into Leopard (the BIOS is set to boot from HD and not from CD/DVD). Instead, I get a 5-seconds timer that offers me to "press any key" in order to get somewhere. If I don't touch anything and let the timer finish, the computer restarts over and over again. If I "press any key", the computer offers me 2 options. The first - "hd (0,1) windows NTFS". I can click that and then the computer uploads my pre-installed windows (only without Internet, but that's other prolem). The second - "hd (0,2) Leopard" (I gave the name 'Leopard' to the partition I installed Leopard on). If i highlight that second option, I get 3 options - To press enter, to type "-v" or to type "?". If I press enter (and also if I type "-v" or "?") the computer restarts.
So actually, Leopard installed successfully, but the computer won't boot into Leopard. It's like: the computer knows behind which door the Leopard partition hides, but it can't open that door.
My specifications I know:
Intel CPU
Kalway DVD v10.5.1 OS X
Win XP pre-installed
NVidia graphic card
1 GB ram
3.0 GHZ
132 GB - main partition - win XP installed on it
15 GB - second partition - i installed leopard on it
Maybe it is about not installing the correct drivers or bootloader when hitting "customize" prior to the installation? I marked the the vanillav kernel and the acpi as mentioned, in the video I marked natit_gf (something like that), soundcards - azalia out, network - the only one showed, with SSE 2 patch and without, and bootloader - mbr (after checking this is the right one).
BTW, I found another user who had that problem but didn't see anyone related to him, here:
http://forum.insanelymac.com/index.php?act...&pid=591350That's it.
If someone knows anything that can help me, I will really appriciate that.
Please, please, help me if you know how.
Thanks in advance,
gal1111
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please
click here.
