Codec: Realtek ALC861-VD
Address: 2
Vendor Id: 0x10ec0862
Subsystem Id: 0x10ec0862
Revision Id: 0x100001
cannot get any sound or any input
Full Version: AppleHDA Patcher Results
Soundcard vendor : SoundMax ADI
Soundcard model : ADI1988B
vendor id :0x11d4198b
Working : None
Not Working : All
Patcher version : 1.16 - 1.20
System version : 10.5.1
Codecs are here: http://forum.insanelymac.com/index.php?s=&...st&p=554141 or http://forum.insanelymac.com/index.php?s=&...st&p=553798
Soundcard model : ADI1988B
vendor id :0x11d4198b
Working : None
Not Working : All
Patcher version : 1.16 - 1.20
System version : 10.5.1
Codecs are here: http://forum.insanelymac.com/index.php?s=&...st&p=554141 or http://forum.insanelymac.com/index.php?s=&...st&p=553798
QUOTE (TimeActor @ Dec 28 2007, 12:27 PM) 
hi telmac,
i know this site!
but there isn´t a codec for the sigmatel 7664.
i know this site!
but there isn´t a codec for the sigmatel 7664.
so u have to do ur own codec dump. digg around on the forum and u'll find the way:)
u can use some linux livecd, eg: knoppix.
Codec: Realtek ALC861-VD
Address: 2
Vendor Id: 0x10ec0862
Subsystem Id: 0x10ec0862
Revision Id: 0x100001
cannot get any sound or any input
This post has been edited by Taruga: Today, 12:53 AM Reason for edit: Try this: http://forum.insanelymac.com/index.php?act...st&id=19474 and let me know if it works
Attached File(s)
codec.txt ( 6.89K ) Number of downloads: 4
I can't find the
http://forum.insanelymac.com/index.php?act...st&id=19474
Is it http://forum.insanelymac.com/index.php?act...st&id=19479 ?Named TarugaALC862Installer2.zip ?
I has try it ,but it still not working with input or output
Address: 2
Vendor Id: 0x10ec0862
Subsystem Id: 0x10ec0862
Revision Id: 0x100001
cannot get any sound or any input
This post has been edited by Taruga: Today, 12:53 AM Reason for edit: Try this: http://forum.insanelymac.com/index.php?act...st&id=19474 and let me know if it works
Attached File(s)
codec.txt ( 6.89K ) Number of downloads: 4I can't find the
http://forum.insanelymac.com/index.php?act...st&id=19474
Is it http://forum.insanelymac.com/index.php?act...st&id=19479 ?Named TarugaALC862Installer2.zip ?
I has try it ,but it still not working with input or output
QUOTE (clero @ Dec 29 2007, 10:09 AM)
Codec: Realtek ALC861-VD
Address: 2
Vendor Id: 0x10ec0862
Subsystem Id: 0x10ec0862
Revision Id: 0x100001
cannot get any sound or any input
This post has been edited by Taruga: Today, 12:53 AM Reason for edit: Try this: http://forum.insanelymac.com/index.php?act...st&id=19474 and let me know if it works
Attached File(s) codec.txt ( 6.89K ) Number of downloads: 4
I can't find the
http://forum.insanelymac.com/index.php?act...st&id=19474
Is it http://forum.insanelymac.com/index.php?act...st&id=19479 ?Named TarugaALC862Installer2.zip ?
I has try it ,but it still not working with input or output
Address: 2
Vendor Id: 0x10ec0862
Subsystem Id: 0x10ec0862
Revision Id: 0x100001
cannot get any sound or any input
This post has been edited by Taruga: Today, 12:53 AM Reason for edit: Try this: http://forum.insanelymac.com/index.php?act...st&id=19474 and let me know if it works
Attached File(s)
codec.txt ( 6.89K ) Number of downloads: 4I can't find the
http://forum.insanelymac.com/index.php?act...st&id=19474
Is it http://forum.insanelymac.com/index.php?act...st&id=19479 ?Named TarugaALC862Installer2.zip ?
I has try it ,but it still not working with input or output
Hi clero, try this link, its work for me today in my Lenovo N100 0689 E4S, this guy made the damn thing work!
http://forum.insanelymac.com/index.php?showtopic=63957
let me know if this solution for you
GreetZ
Sorry taruga for the OT
STAC 9271D which is in intel dg965wh,dg33tL etc motherboards is only woking in tigers with only 2 channel output and not in Leopard somebody plz help to work in Leopard.
QUOTE (bl00dfeast @ Dec 29 2007, 11:45 PM)
Hi clero, try this link, its work for me today in my Lenovo N100 0689 E4S, this guy made the damn thing work!
http://forum.insanelymac.com/index.php?showtopic=63957
let me know if this solution for you
GreetZ
Sorry taruga for the OT
http://forum.insanelymac.com/index.php?showtopic=63957
let me know if this solution for you
GreetZ
Sorry taruga for the OT
thanks!
I have try it.
It works So nice that I can use "ichat" communicate with my Macbook !
So Cool!
my PC:
intel 965p With ICH8
intel Intel Core 2 Duo E2140
NV6600 PCI-E apple-editon (I have reflash a pc-nv6600 bios to it)
thanks every one for your help!
Computer Type: PC
Sound Card Vendor: Sigmatel
Sound Card Model: Stac9205
Vendor Id: 0x10ec0888
Working: Nothing
Not Working: everything
Patcher Version used: 1.17
System Version: Leopard 10.5.1
nothing works..
Sound Card Vendor: Sigmatel
Sound Card Model: Stac9205
Vendor Id: 0x10ec0888
Working: Nothing
Not Working: everything
Patcher Version used: 1.17
System Version: Leopard 10.5.1
nothing works..
one step closer to hear the sweet delicate sound of thunder.
system intel pentium d 3.4 ghz processor,intel d946gzis mb,1gb ram,acer tft monitor,nvidia 7100 grafic card,40 gb ata segate hd,sigmatel 9227 audio
os- osx leopard 10.5.0 till now sucess-------, first copied files from stac9227_83847618_testing.zip,
Open up Terminal and type in the following
QUOTE
sudo rm /System/Library/Extensions.mkext
QUOTE
sudo kextcache -k /System/Library/Extensions
Open Disk Utility and Repair Disk Permissions.
Reboot.
THEN
PATCHED WITH TARUGA'S HDA PATCHER v1.14
rebooted
result was pleasing to see output and input detected in the system preferences in the sound window ,but it was of no success as i didnt hear any sound coming from jack
mic not tested yet-----HELP REQUIRED TARUGA
SIGMATEL AUDIO 9227{stac9227_83847618}
system intel pentium d 3.4 ghz processor,intel d946gzis mb,1gb ram,acer tft monitor,nvidia 7100 grafic card,40 gb ata segate hd,sigmatel 9227 audio
os- osx leopard 10.5.0 till now sucess-------, first copied files from stac9227_83847618_testing.zip,
Open up Terminal and type in the following
QUOTE
sudo rm /System/Library/Extensions.mkext
QUOTE
sudo kextcache -k /System/Library/Extensions
Open Disk Utility and Repair Disk Permissions.
Reboot.
THEN
PATCHED WITH TARUGA'S HDA PATCHER v1.14
rebooted
result was pleasing to see output and input detected in the system preferences in the sound window ,but it was of no success as i didnt hear any sound coming from jack
mic not tested yet-----HELP REQUIRED TARUGA
SIGMATEL AUDIO 9227{stac9227_83847618}
#1:
Computer Type: PC Desktop MB Asus P5LD2-X/1333
Sound Card Vendor: Realtek
Sound Card Model: ALC662
Vendor Id: 0x10ec0662
Subsystem Id: 0x10438249
Working: Line Out, Mic In, Line In
Not tested: Digital Out
Not Working: Volume Control (grey)
Patcher Version used: 1.20
System Version: Leopard iATKOS (EFI+Vanilla) 10.5.1
obs: codec_dump.txt from Kurumin 7 (brazilian distro), Kinoppix and Ubuntu. Same results.
Click to view attachment
#2
Computer Type: Laptop Asus W5F
Sound Card Vendor: Realtek
Sound Card Model: ALC660
Vendor Id: 0x10ec0660
Subsystem Id: 0x10430000
Working: Nothing
Not Working: All (nothing in Sounds Preferences)
Patcher Version used: 1.20
System Version: Leopard iATKOS (EFI+Vanilla) 10.5.1
obs: codec_dump.txt from Kurumin 7 (brazilian distro), Kinoppix and Ubuntu. Same results.
Click to view attachment
Computer Type: PC Desktop MB Asus P5LD2-X/1333
Sound Card Vendor: Realtek
Sound Card Model: ALC662
Vendor Id: 0x10ec0662
Subsystem Id: 0x10438249
Working: Line Out, Mic In, Line In
Not tested: Digital Out
Not Working: Volume Control (grey)
Patcher Version used: 1.20
System Version: Leopard iATKOS (EFI+Vanilla) 10.5.1
obs: codec_dump.txt from Kurumin 7 (brazilian distro), Kinoppix and Ubuntu. Same results.
Click to view attachment
#2
Computer Type: Laptop Asus W5F
Sound Card Vendor: Realtek
Sound Card Model: ALC660
Vendor Id: 0x10ec0660
Subsystem Id: 0x10430000
Working: Nothing
Not Working: All (nothing in Sounds Preferences)
Patcher Version used: 1.20
System Version: Leopard iATKOS (EFI+Vanilla) 10.5.1
obs: codec_dump.txt from Kurumin 7 (brazilian distro), Kinoppix and Ubuntu. Same results.
Click to view attachment
Firstly use AppleHDAPatcher_v1.16 with STAC9227_83847618.txt file you will notice that it removes the Azaliaxx.kext(this is your problem) then when you have rebooted you use STAC9227_0x83847618.zip to replace the two kext file in /sys/lib/ext, chmod, chown, rm kextcache and reboot you should have everything working
OR
I see Taruga has a new installer on his post, try that.....
sticMAN
OR
I see Taruga has a new installer on his post, try that.....
sticMAN
QUOTE (docdjp @ Dec 31 2007, 05:44 PM)
one step closer to hear the sweet delicate sound of thunder.
system intel pentium d 3.4 ghz processor,intel d946gzis mb,1gb ram,acer tft monitor,nvidia 7100 grafic card,40 gb ata segate hd,sigmatel 9227 audio
os- osx leopard 10.5.0 till now sucess-------, first copied files from stac9227_83847618_testing.zip,
Open up Terminal and type in the following
QUOTE
sudo rm /System/Library/Extensions.mkext
QUOTE
sudo kextcache -k /System/Library/Extensions
Open Disk Utility and Repair Disk Permissions.
Reboot.
THEN
PATCHED WITH TARUGA'S HDA PATCHER v1.14
rebooted
result was pleasing to see output and input detected in the system preferences in the sound window ,but it was of no success as i didnt hear any sound coming from jack
mic not tested yet-----HELP REQUIRED TARUGA
SIGMATEL AUDIO 9227{stac9227_83847618}
system intel pentium d 3.4 ghz processor,intel d946gzis mb,1gb ram,acer tft monitor,nvidia 7100 grafic card,40 gb ata segate hd,sigmatel 9227 audio
os- osx leopard 10.5.0 till now sucess-------, first copied files from stac9227_83847618_testing.zip,
Open up Terminal and type in the following
QUOTE
sudo rm /System/Library/Extensions.mkext
QUOTE
sudo kextcache -k /System/Library/Extensions
Open Disk Utility and Repair Disk Permissions.
Reboot.
THEN
PATCHED WITH TARUGA'S HDA PATCHER v1.14
rebooted
result was pleasing to see output and input detected in the system preferences in the sound window ,but it was of no success as i didnt hear any sound coming from jack
mic not tested yet-----HELP REQUIRED TARUGA
SIGMATEL AUDIO 9227{stac9227_83847618}
Computer Type: Notebook MSI-VR600X-240 Intel chipset ICH7
Sound Card Vendor: Realtek
Sound Card Model: ALC883
Vendor Id: 0x10ec0883
Subsystem Id: 0x14623f03
Revision Id: 0x100002
Working: None
Not Working: Internal speakers, Headphone out, Internal Microphone, Line In
Untested: Digital out
Patcher Version used: 1.1.6 and 1.2.0
System Version: Leopard 1.5.1
obs: Patcher 16 recognized Internal Speaker as input not as output, 20 recognizes everything correctly but still no sound. ALC883Installer is not working either (tried with all 4 install options). I can get Internal Speakers working using AppleAzalia (with volume control), but I would rather use the headphone out jack. Is there any way to patch AppleAzalia so it uses the line out instead of the internal speakers?
Attachment: Codec dump
Sound Card Vendor: Realtek
Sound Card Model: ALC883
Vendor Id: 0x10ec0883
Subsystem Id: 0x14623f03
Revision Id: 0x100002
Working: None
Not Working: Internal speakers, Headphone out, Internal Microphone, Line In
Untested: Digital out
Patcher Version used: 1.1.6 and 1.2.0
System Version: Leopard 1.5.1
obs: Patcher 16 recognized Internal Speaker as input not as output, 20 recognizes everything correctly but still no sound. ALC883Installer is not working either (tried with all 4 install options). I can get Internal Speakers working using AppleAzalia (with volume control), but I would rather use the headphone out jack. Is there any way to patch AppleAzalia so it uses the line out instead of the internal speakers?
Attachment: Codec dump
I know that my audio is Sigmatel, but I don't know how to find out specifically which kext i need. I have a Dell XPS 400. THe Mac Wiki says Sigmatel 9222...but that number doesnt show up in any forum on insanely mac. Any help would be greatly appreciated!
Computer Type: laptop Acer Aspire 5310
Sound Card Vendor: Realtek
Sound Card Model: ALC268
Vendor Id: 0x10ec0268
Working: Headphones
Not Working: Mic, Speakers, Line in.
Patcher Version used: ALC268test5
System Version: Tiger 4.10
obs: Headphones full working, speakers crackling.
Some hints about this codec:
1. in Ubuntu it works only with ALSA 1.0.15
2. In Windows XP it works only after having installed modem and ethernet driver (!)
3. Azalia kext gives control on audio volume, ALC268test5 doesn't.
Linux codec in attachment. May ioreg be useful?
EDIT: resolved with Diego Giovany's patch of taruga's patch! (search in taruga's main topic)
Sound Card Vendor: Realtek
Sound Card Model: ALC268
Vendor Id: 0x10ec0268
Working: Headphones
Not Working: Mic, Speakers, Line in.
Patcher Version used: ALC268test5
System Version: Tiger 4.10
obs: Headphones full working, speakers crackling.
Some hints about this codec:
1. in Ubuntu it works only with ALSA 1.0.15
2. In Windows XP it works only after having installed modem and ethernet driver (!)
3. Azalia kext gives control on audio volume, ALC268test5 doesn't.
Linux codec in attachment. May ioreg be useful?
EDIT: resolved with Diego Giovany's patch of taruga's patch! (search in taruga's main topic)
Computer Type: Desktop
Sound Card Vendor: SoundMax
Sound Card Model: ADI1986A
Vendor Id: 0x11d41986
Working: Speakers
Not Working: Mic, LineIn,
Patcher Version used: ad1986.zip
System Version: Tiger 10.4.11
obs: all devices listed in system preferencies, but no volume control and mic not working, however sound out works.
Sound Card Vendor: SoundMax
Sound Card Model: ADI1986A
Vendor Id: 0x11d41986
Working: Speakers
Not Working: Mic, LineIn,
Patcher Version used: ad1986.zip
System Version: Tiger 10.4.11
obs: all devices listed in system preferencies, but no volume control and mic not working, however sound out works.
Computer Type: Laptop: Dell Inspiron 1300 (B130 Stateside)
Sound Card Vendor: Sigmatel
Sound Card Model: STAC9200
Vendor Id: 0x83847690
Working: [Partially] Internal Speakers / Headphone Out / Mic in
Not Working: Automatic Speaker shut off with headphones plugged in
Patcher Version used: 1.2.0
System Version: Leopard 10.5
obs: When audio out is connected music comes out internal speakers too.
Used my own dump from a Dell Inspiron 1300:
Sound Card Vendor: Sigmatel
Sound Card Model: STAC9200
Vendor Id: 0x83847690
Working: [Partially] Internal Speakers / Headphone Out / Mic in
Not Working: Automatic Speaker shut off with headphones plugged in
Patcher Version used: 1.2.0
System Version: Leopard 10.5
obs: When audio out is connected music comes out internal speakers too.
Used my own dump from a Dell Inspiron 1300:
AppleHDA Patcher - 2006/2007 by Taruga v1.20
* Patching AppleHDA.kext to 0x838476a0 Done
* Checking AppleHDA for patch Done
0001f4a7 cmpl $0x838476a0,%eax
0002058b cmpl $0x838476a0,%eax
* Checking for SPDIF Out Detected
* Checking for SPDIF In Not Detected
* Using the following nodes in pathmap
Speaker :
* Copying new config to destination Done
* Repairing Permissions Done
* Deleting Extensions Cache Done
** Done patching - You can reboot now **
output from stac9205
repaired dump with bbedit and set to unix breaks, still no audio
* Patching AppleHDA.kext to 0x838476a0 Done
* Checking AppleHDA for patch Done
0001f4a7 cmpl $0x838476a0,%eax
0002058b cmpl $0x838476a0,%eax
* Checking for SPDIF Out Detected
* Checking for SPDIF In Not Detected
* Using the following nodes in pathmap
Speaker :
* Copying new config to destination Done
* Repairing Permissions Done
* Deleting Extensions Cache Done
** Done patching - You can reboot now **
output from stac9205
repaired dump with bbedit and set to unix breaks, still no audio
dell 1500
stac 9205
Donot work all
after install codec with applehDA
stac 9205
Donot work all
after install codec with applehDA
Computer Type: Laptop
Sound Card Vendor: Toshiba
Sound Card Model: ALC262
Vendor Id: 0x10ec0262
I have tryed whit alc262testing.zip on IA**** leopard 10.5.1
Working speakers and headphone together, but no sound when try to switch on headphone .
Please help
Sound Card Vendor: Toshiba
Sound Card Model: ALC262
Vendor Id: 0x10ec0262
I have tryed whit alc262testing.zip on IA**** leopard 10.5.1
Working speakers and headphone together, but no sound when try to switch on headphone .
Please help
Computer Type: Laptop - Fujitsu Siemens V5545
Sound Card Vendor:
On Mac Leo 10.5.1 -
Intel High Definition Audio:
Device ID: 0x1734110E
On Ubuntu 7.10
Codec: Conexant CX20549 (Venice)
Address: 0
Vendor Id: 0x14f15045
Subsystem Id: 0x1734110e
Revision Id: 0x100100
Patcher Version used:1.2.0
System Version: Leopard 10.5.1
Result: Still no sound
Dump:
Click to view attachment
Sound Card Vendor:
On Mac Leo 10.5.1 -
Intel High Definition Audio:
Device ID: 0x1734110E
On Ubuntu 7.10
Codec: Conexant CX20549 (Venice)
Address: 0
Vendor Id: 0x14f15045
Subsystem Id: 0x1734110e
Revision Id: 0x100100
Patcher Version used:1.2.0
System Version: Leopard 10.5.1
Result: Still no sound
CODE
AppleHDA Patcher - 2006/2007 by Taruga v1.20
_______________________________________________________
Codec : Conexant CX20549 (Venice)
Vendor Id : 0x14f15045
Subsystem Id : 0x1734110e
_______________________________________________________
* Detected unsupported Conexant Codec
_______________________________________________________
Codec : Conexant CX20549 (Venice)
Vendor Id : 0x14f15045
Subsystem Id : 0x1734110e
_______________________________________________________
* Detected unsupported Conexant Codec
Dump:
Click to view attachment
QUOTE (demail_2006 @ Dec 29 2007, 10:33 AM)
STAC 9271D which is in intel dg965wh,dg33tL etc motherboards is only woking in tigers with only 2 channel output and not in Leopard somebody plz help to work in Leopard.
leopard 10.5.1, dg965wh, download stac9271d on taruga's first post, use kext helper to install the 2 kext, reboot, enjoy sound!!!!
QUOTE (3mp3ror @ Jan 3 2008, 10:59 PM)
Computer Type: Laptop - Fujitsu Siemens V5545
Sound Card Vendor:
On Mac Leo 10.5.1 -
Intel High Definition Audio:
Device ID: 0x1734110E
On Ubuntu 7.10
Codec: Conexant CX20549 (Venice)
Address: 0
Vendor Id: 0x14f15045
Subsystem Id: 0x1734110e
Revision Id: 0x100100
Patcher Version used:1.2.0
System Version: Leopard 10.5.1
Result: Still no sound
Dump:
Click to view attachment
Sound Card Vendor:
On Mac Leo 10.5.1 -
Intel High Definition Audio:
Device ID: 0x1734110E
On Ubuntu 7.10
Codec: Conexant CX20549 (Venice)
Address: 0
Vendor Id: 0x14f15045
Subsystem Id: 0x1734110e
Revision Id: 0x100100
Patcher Version used:1.2.0
System Version: Leopard 10.5.1
Result: Still no sound
CODE
AppleHDA Patcher - 2006/2007 by Taruga v1.20
_______________________________________________________
Codec : Conexant CX20549 (Venice)
Vendor Id : 0x14f15045
Subsystem Id : 0x1734110e
_______________________________________________________
* Detected unsupported Conexant Codec
_______________________________________________________
Codec : Conexant CX20549 (Venice)
Vendor Id : 0x14f15045
Subsystem Id : 0x1734110e
_______________________________________________________
* Detected unsupported Conexant Codec
Dump:
Click to view attachment
I have the same trouble as you. Im use conexant cx20549. Please, try to write about it to separate topic - here for Conexant chipsets. It will be comfortably
Computer type - Notebook hp nx7400
Sound Card Vendor- AnalogDevice
Sound Card Model - AD1981
Vendor ID - 0X11d41981
Working - Nothing ( Sound)
Not Working - Anything (Sound related hardwares)
Patcher Version used - Not used because no dump file , used Azalia Audio package to install
System Version - Leopard 10.5 patched 9a581
Obs :Volume Control slider moves with mouse pointer, Mute button Light always on, When I press volume up / Down key bar graph segments for volume apears by increasing and decreasing respectively.
I am trying for codec dump by installing linux
Gopan
Sound Card Vendor- AnalogDevice
Sound Card Model - AD1981
Vendor ID - 0X11d41981
Working - Nothing ( Sound)
Not Working - Anything (Sound related hardwares)
Patcher Version used - Not used because no dump file , used Azalia Audio package to install
System Version - Leopard 10.5 patched 9a581
Obs :Volume Control slider moves with mouse pointer, Mute button Light always on, When I press volume up / Down key bar graph segments for volume apears by increasing and decreasing respectively.
I am trying for codec dump by installing linux
Gopan
QUOTE (Gopan @ Jan 4 2008, 12:37 AM)
Computer type - Notebook hp nx7400
Sound Card Vendor- AnalogDevice
Sound Card Model - AD1981
Vendor ID - 0X11d41981
Working - Nothing ( Sound)
Not Working - Anything (Sound related hardwares)
Patcher Version used - Not used because no dump file , used Azalia Audio package to install
System Version - Leopard 10.5 patched 9a581
Obs :Volume Control slider moves with mouse pointer, Mute button Light always on, When I press volume up / Down key bar graph segments for volume apears by increasing and decreasing respectively.
I am trying for codec dump by installing linux
Gopan
Sound Card Vendor- AnalogDevice
Sound Card Model - AD1981
Vendor ID - 0X11d41981
Working - Nothing ( Sound)
Not Working - Anything (Sound related hardwares)
Patcher Version used - Not used because no dump file , used Azalia Audio package to install
System Version - Leopard 10.5 patched 9a581
Obs :Volume Control slider moves with mouse pointer, Mute button Light always on, When I press volume up / Down key bar graph segments for volume apears by increasing and decreasing respectively.
I am trying for codec dump by installing linux
Gopan
Load from any Linux Live CD (for example Ubuntu). Dont install Linux - it does not needed=))) only boot from Live CD, if you dont plain to use Linux in future=)))
P5K-E Wifi/AP
Using Kaly 10.5.1, by default I have only input, so tried the patcher but with no success:
The dump is done with ubuntu 7.10
Hope the new version will come soon and will solve my problem
P.S. Thank you guys for doing this and helping the community, much much appreciated
Using Kaly 10.5.1, by default I have only input, so tried the patcher but with no success:
QUOTE
AppleHDA Patcher - 2006/2007 by Taruga v1.20
_______________________________________________________
Codec : Analog Devices AD1988B
Vendor Id : 0x11d4198b
Subsystem Id : 0x1043829b
_______________________________________________________
This codec is not working at the moment, it needs more research
_______________________________________________________
Codec : Analog Devices AD1988B
Vendor Id : 0x11d4198b
Subsystem Id : 0x1043829b
_______________________________________________________
This codec is not working at the moment, it needs more research
The dump is done with ubuntu 7.10
Hope the new version will come soon and will solve my problem
P.S. Thank you guys for doing this and helping the community, much much appreciated
QUOTE (peerless @ Jan 5 2008, 01:39 AM)
P5K-E Wifi/AP
Using Kaly 10.5.1, by default I have only input, so tried the patcher but with no success:
The dump is done with ubuntu 7.10
Hope the new version will come soon and will solve my problem
P.S. Thank you guys for doing this and helping the community, much much appreciated
Using Kaly 10.5.1, by default I have only input, so tried the patcher but with no success:
The dump is done with ubuntu 7.10
Hope the new version will come soon and will solve my problem
P.S. Thank you guys for doing this and helping the community, much much appreciated
Hi peerless! Place your dump at this sub-forum
thx
Have some questions how does one make a codec dump,I have ALC888 from an Abit IP35-E and for the life of me cannot get it to show or give sound,with modified Azalia.kext or other means.Is there a easier alternative for me to stop wasting time on this problem,I just need regular sound to some speakers through a cheap audio card(I do have an older C-media).Thanks in advance.
boss,
can you explain it . I have not installed or worked in linux yet , but I have friends who know bit. If you guide me how to create this dump , will be great.In the mean time before I see your mail one of my friend installed Fedora linux in my nx7400. Sound is working with out any issue.
Thanks
Gopan
can you explain it . I have not installed or worked in linux yet , but I have friends who know bit. If you guide me how to create this dump , will be great.In the mean time before I see your mail one of my friend installed Fedora linux in my nx7400. Sound is working with out any issue.
Thanks
Gopan
hi its me again,
firstly i deleted kexts-applehda and appleazilaaudio from extensions and also appleazilaaudio from ac97audio/content/plugin rebooted , using kext helper b7 insalled kexts from tarugas stac83847618.zip and help from sticman[member], rebooted ,went to system preferences-sound. i got both line- in and line-out but no sound coming from either headphone or external speakers ,,,pointers moving..... HELP REQUIRED
SYSTEM - DESKTOP PC
INTEL D946GZIS MB, PENTIUM D 3.4GHZ PROCESSOR ,1 GB RAM, NVIDIA 7100 X64 256MB GRAFIC CARD, SATA HD-160GB, ATA HD-40 GB[ FOR OS X]
OS -LEO 10.5.0 HARDDISK IMAGE INSTALLED NATIVELY THROUGH WINDOWS
AUDIO -STAC9227 , DETECTED IN PREFERENCES BUT NO SOUND COMING FROM SPEAKERS
LAN- INTEL PR0100 WORKING
WEBCAM- TRUST -WORKING[MACAM .dmg]
firstly i deleted kexts-applehda and appleazilaaudio from extensions and also appleazilaaudio from ac97audio/content/plugin rebooted , using kext helper b7 insalled kexts from tarugas stac83847618.zip and help from sticman[member], rebooted ,went to system preferences-sound. i got both line- in and line-out but no sound coming from either headphone or external speakers ,,,pointers moving..... HELP REQUIRED
SYSTEM - DESKTOP PC
INTEL D946GZIS MB, PENTIUM D 3.4GHZ PROCESSOR ,1 GB RAM, NVIDIA 7100 X64 256MB GRAFIC CARD, SATA HD-160GB, ATA HD-40 GB[ FOR OS X]
OS -LEO 10.5.0 HARDDISK IMAGE INSTALLED NATIVELY THROUGH WINDOWS
AUDIO -STAC9227 , DETECTED IN PREFERENCES BUT NO SOUND COMING FROM SPEAKERS
LAN- INTEL PR0100 WORKING
WEBCAM- TRUST -WORKING[MACAM .dmg]
Computer Type: Laptop: Fujitsu-Siemens Amilo PI 1556
Sound Card Vendor: Realtek
Sound Card Model: ALC880
Vendor Id: 0x10ec0880
Working: Nothing
Not Working: Everything
Patcher Version used: Every Patcher
System Version: Leo 10.5.1
With the Patchers i didnt get Inputs/Outputs shown in Preferences
With the beta4some861....880models i get Input/outputs shown in Preferences but no sound, just a short "blopp" on shutdown/startup
thx for your work!
added 2 codec dumps
Click to view attachment
Click to view attachment
Sound Card Vendor: Realtek
Sound Card Model: ALC880
Vendor Id: 0x10ec0880
Working: Nothing
Not Working: Everything
Patcher Version used: Every Patcher
System Version: Leo 10.5.1
With the Patchers i didnt get Inputs/Outputs shown in Preferences
With the beta4some861....880models i get Input/outputs shown in Preferences but no sound, just a short "blopp" on shutdown/startup
thx for your work!
added 2 codec dumps
Click to view attachment
Click to view attachment
Computer Type: Lenovo Thinkpad T61
Sound Card Vendor: Analog Devices
Sound Card Model: AD1984
Vendor Id: 0x11d41984
Working: nothing
Not Working: everything (no audio)
Patcher Version used: 1.20
System Version: Leopard 10.5.1
obs: Patcher reports * Detected unsupported Analog Codec
Output from the patcher program pasted below:
AppleHDA Patcher - 2006/2007 by Taruga v1.20
_______________________________________________________
Codec : Analog Devices AD1984
Vendor Id : 0x11d41984
Subsystem Id : 0x17aa20bb
_______________________________________________________
* Detected unsupported Analog Codec
-- Otipher
Sound Card Vendor: Analog Devices
Sound Card Model: AD1984
Vendor Id: 0x11d41984
Working: nothing
Not Working: everything (no audio)
Patcher Version used: 1.20
System Version: Leopard 10.5.1
obs: Patcher reports * Detected unsupported Analog Codec
Output from the patcher program pasted below:
AppleHDA Patcher - 2006/2007 by Taruga v1.20
_______________________________________________________
Codec : Analog Devices AD1984
Vendor Id : 0x11d41984
Subsystem Id : 0x17aa20bb
_______________________________________________________
* Detected unsupported Analog Codec
-- Otipher
Computer Type: Notebook Acer Travelmate 5720G
Sound Card Vendor: Intel ICH8 HDAUDIO
Sound Card Model: Realtek HDAUDIO
Vendor Id: Intel VEN=8086,DEV=284B / Realtek VEN=10EC,DEV=0268
Working: nothing yet
Not Working: everything else, grey volume slide, no audio device shown
Patcher Version used: 1.19, 1.20, ALC268test5
System Version: Leo 10.5.1, Vanilla, EFI8
obs: Detected by system profiler as Intel High Definition Audio with Device-Id=0x1025011F, Audio-Id=12
Ubuntu 7.10 64bit reports the audio device as codec#0 and the build-in modem as codec#1 (Conexant ID 2c06
Address: 1 Vendor Id: 0x14f12c06). Maybe AppleHDA Patcher gets confused by this?
Thanks
--LowTech
Sound Card Vendor: Intel ICH8 HDAUDIO
Sound Card Model: Realtek HDAUDIO
Vendor Id: Intel VEN=8086,DEV=284B / Realtek VEN=10EC,DEV=0268
Working: nothing yet
Not Working: everything else, grey volume slide, no audio device shown
Patcher Version used: 1.19, 1.20, ALC268test5
System Version: Leo 10.5.1, Vanilla, EFI8
obs: Detected by system profiler as Intel High Definition Audio with Device-Id=0x1025011F, Audio-Id=12
Ubuntu 7.10 64bit reports the audio device as codec#0 and the build-in modem as codec#1 (Conexant ID 2c06
Address: 1 Vendor Id: 0x14f12c06). Maybe AppleHDA Patcher gets confused by this?
CODE
Intel High Definition Audio:
AppleHDA Patcher - 2006/2007 by Taruga v1.20
* Patching AppleHDA.kext to 0x10ec0268 Done
* Checking AppleHDA for patch Done
0001f4a0 cmpl $0x10ec0885,%eax
0001f4a7 cmpl $0x10ec0268,%eax
00020584 cmpl $0x10ec0885,%eax
0002058b cmpl $0x10ec0268,%eax
* Checking for SPDIF Out Not Detected
* Checking for SPDIF In Not Detected
* Using the following nodes in pathmap
Speaker :
* Copying new config to destination Done
* Repairing Permissions Done
* Deleting Extensions Cache Done
** Done patching - You can reboot now **
AppleHDA Patcher - 2006/2007 by Taruga v1.20
* Patching AppleHDA.kext to 0x10ec0268 Done
* Checking AppleHDA for patch Done
0001f4a0 cmpl $0x10ec0885,%eax
0001f4a7 cmpl $0x10ec0268,%eax
00020584 cmpl $0x10ec0885,%eax
0002058b cmpl $0x10ec0268,%eax
* Checking for SPDIF Out Not Detected
* Checking for SPDIF In Not Detected
* Using the following nodes in pathmap
Speaker :
* Copying new config to destination Done
* Repairing Permissions Done
* Deleting Extensions Cache Done
** Done patching - You can reboot now **
Thanks
--LowTech
Computer: Toshiba satellite L40 notebook
Sound-card Info:
Vendor Id: 0x11d41986
Subsystem Id: 0x1179ff40
AppleHDA patcher 1.20 : Not supported yet... needs more research
AppleAzaliaAudio :
Working: Laptop speakers
Not working: Headphone port, and Mic port...
Please master Taruga... we count on you man! If it works i'll make a donation! promised...
Sound-card Info:
Vendor Id: 0x11d41986
Subsystem Id: 0x1179ff40
AppleHDA patcher 1.20 : Not supported yet... needs more research
AppleAzaliaAudio :
Working: Laptop speakers
Not working: Headphone port, and Mic port...
Please master Taruga... we count on you man! If it works i'll make a donation! promised...
Computer Type: Laptop NX7300
Sound Card Vendor: SoundMax
Sound Card Model: 1981HD
Vendor Id: 0x11d41981
Don't work, i try azalia but don't work.
Sound Card Vendor: SoundMax
Sound Card Model: 1981HD
Vendor Id: 0x11d41981
Don't work, i try azalia but don't work.
ALC 861 not working
+++
Computer Type: laptop Airis n1212 = Uniwill x20II - mb: Uniwill X20IA - chipset Intel i945GM
Sound Card Vendor: Realtek
Sound Card Model: ALC861
Vendor Id: 0x10ec0861
Subsystem Id: 0x15840000
See attached Linux dump
Physical in/out connections: - integrated mic
- stereo jack 3,5 mm combined Line / Mic in
- stereo jack 3,5 mm combined Line / headphone / spdif out
+++
Working: none
Not Working: all
Patcher Version used: 1.12 to 1.19 (1.20 not working under Tiger 10.4.11)
AppleHDA.kext versions: 10.4.3 / 10.4.8 / 10.4.9 / 10.4.10 / 10.4.11
I tried nearly any combination
System Version: Tiger 10.4.11 (stock kernel)
+++
Working: none
Not Working: all
I got at least sound device recognized in system preferences, but no sound OUT nor IN
(see attached pictures)
Realtek ALC861 kext 17/12/2007
System Version: Tiger 10.4.11 (stock kernel)
+++
obs: I could never get any soud from this laptop, even with AC97 or Azalia. I am using an iMic...sofar.
Airis n1212 = Uniwill x20II - 12.1" - Intel core 2 duo T7200 2Ghz - 2Go ram
ALC861 - iMic (temporarily I hope) - Marvell Yukon 88E8053 - Intel 3945 a/b/g - Linksys WUSB54GC (temporarily I hope)
JaS 10.4.8 / JaS 10.4.9 combo update / Netkas 10.4.10 update / custom 10.4.11 update (8.10.1 kernel) / pc_efi_v8 / stock MacOSXUpdCombo10.4.11Intel including 8.11.1 kernel
+++
Computer Type: laptop Airis n1212 = Uniwill x20II - mb: Uniwill X20IA - chipset Intel i945GM
Sound Card Vendor: Realtek
Sound Card Model: ALC861
Vendor Id: 0x10ec0861
Subsystem Id: 0x15840000
See attached Linux dump
Physical in/out connections: - integrated mic
- stereo jack 3,5 mm combined Line / Mic in
- stereo jack 3,5 mm combined Line / headphone / spdif out
+++
Working: none
Not Working: all
Patcher Version used: 1.12 to 1.19 (1.20 not working under Tiger 10.4.11)
AppleHDA.kext versions: 10.4.3 / 10.4.8 / 10.4.9 / 10.4.10 / 10.4.11
I tried nearly any combination
System Version: Tiger 10.4.11 (stock kernel)
+++
Working: none
Not Working: all
I got at least sound device recognized in system preferences, but no sound OUT nor IN
(see attached pictures)
Realtek ALC861 kext 17/12/2007
System Version: Tiger 10.4.11 (stock kernel)
+++
obs: I could never get any soud from this laptop, even with AC97 or Azalia. I am using an iMic...sofar.
Airis n1212 = Uniwill x20II - 12.1" - Intel core 2 duo T7200 2Ghz - 2Go ram
ALC861 - iMic (temporarily I hope) - Marvell Yukon 88E8053 - Intel 3945 a/b/g - Linksys WUSB54GC (temporarily I hope)
JaS 10.4.8 / JaS 10.4.9 combo update / Netkas 10.4.10 update / custom 10.4.11 update (8.10.1 kernel) / pc_efi_v8 / stock MacOSXUpdCombo10.4.11Intel including 8.11.1 kernel
Computer Type: PC Intel
Board:Intel 965wh
Procesor:E6400
Sound Card : On Board
Video Card: His x1950pro 256mb ID7280
Working: Audio, Network
Not Working: QE no supported
Driver Of video ATI_X1950_Tiger.mpkg
Fix:OpenGL_Tiger with no positive results
System Version: 10.4.10
Board:Intel 965wh
Procesor:E6400
Sound Card : On Board
Video Card: His x1950pro 256mb ID7280
Working: Audio, Network
Not Working: QE no supported
Driver Of video ATI_X1950_Tiger.mpkg
Fix:OpenGL_Tiger with no positive results
System Version: 10.4.10
Computer Type: PC (IBM Thinkpad T60 with motherboard chipset: Intel Calistoga i945GM/PM
Sound as per System Profiler: Intel High Defition Audio
Vendor Id: 0x17AA2010
Working: Nothing
Not Working: Everything
System Version: Leopard 10.5.1 (Kalyway) with Kernel Darwin 9.1.0
EDIT
Used AzaliaAudio.pkg and now I have sound!! the output works beautiful with great internal speakers and the headset works! I have nothing plugged in so the input is still empty!
Sound as per System Profiler: Intel High Defition Audio
Vendor Id: 0x17AA2010
Working: Nothing
Not Working: Everything
System Version: Leopard 10.5.1 (Kalyway) with Kernel Darwin 9.1.0
EDIT
Used AzaliaAudio.pkg and now I have sound!! the output works beautiful with great internal speakers and the headset works! I have nothing plugged in so the input is still empty!
Computer Type: Gigabyte P35-DS3R (Rev 2.1)
Sound Card Vendor: Realtek
Sound Card Model: ALC889A (but, reconized ALC885)
Vendor Id: 0x10ec0885
Subsystem Id: 0x1458a002
Revision Id: 0x100101
Working: Internal Speakers, Headphones, SPDIF Out(but, only 2channel)
Not Working: Line in, Line Out, Mic(I can't test it)
Patcher Version used: 1.20
System Version: Leopard 10.5.1
---
Hi, Taruga.
I always thanks for your great work.
I hope SPDIF out supports DD, DTS
I attach my linux codec dump file.
Sound Card Vendor: Realtek
Sound Card Model: ALC889A (but, reconized ALC885)
Vendor Id: 0x10ec0885
Subsystem Id: 0x1458a002
Revision Id: 0x100101
Working: Internal Speakers, Headphones, SPDIF Out(but, only 2channel)
Not Working: Line in, Line Out, Mic(I can't test it)
Patcher Version used: 1.20
System Version: Leopard 10.5.1
---
Hi, Taruga.
I always thanks for your great work.
I hope SPDIF out supports DD, DTS
I attach my linux codec dump file.
Computer Type: Laptop: Toshiba x205-s7483
Sound Card Vendor: Realtek
Sound Card Model: ALC268
Vendor Id: 0x10ec0268
Working: none
Not Working: all
Patcher Version used: ALC268Installer1, ALC268Installer2
System Version: Leopard 10.5.1
After browsing the forum, I found another user's dump that was very similar to mine:
Realtek ID 268
vendor: 0x10ec0268
sub id: ox1179ffoa <- this differs from the other user's
rev id: 0x100003
all of these are the same EXCEPT the subsystem id, does this matter? does this change the driver?
Now that I found that information, I used the ALC268Installer1 and got no sound after reboot, so I used #2, after that, I get a kernel panic. (Perhaps this is where I made my mistake... I didn't use the patcher since I thought the 268 would be more specific or something... It was late last night) I safe booted and tried many different things to get back to before I installed #1, but I used Carbon Copy Cloner to image my drive and it doesn't seem to let me restore from that image. I viewed the log that was produced from the installer and noticed the files were extracted to /System/Libraries/Extensions, I deleted this and restored the old one from my backup, now the computer doesn't panic, just sits at the mac logo screen loading for a very long time(even in safe boot (-x)), I haven't been able to get back into the OS.
So, now that I've got all of that out there, haha, thanks for reading so far if you have. My questions are... what should I do to get back so I can try the other packages? I have an image of the HDD directly before installing the ALC268Installer1 but no idea how to use it now that I cannot boot into the OS, should I try and copy the files from /System/Libraries on the backup directly to the HDD? I have a distro of linux installed and vista, which are both operational at this time. Is there any way someone could help me find what files to remove manually? Any better imaging software to try? Sorry if I seem needy :) I felt that backing up the HDD twice would do the job, apparently Carbon Copy Cloner isn't quite the software I wanted to use :(
Thanks for any info you may have
-Mike
Sound Card Vendor: Realtek
Sound Card Model: ALC268
Vendor Id: 0x10ec0268
Working: none
Not Working: all
Patcher Version used: ALC268Installer1, ALC268Installer2
System Version: Leopard 10.5.1
After browsing the forum, I found another user's dump that was very similar to mine:
Realtek ID 268
vendor: 0x10ec0268
sub id: ox1179ffoa <- this differs from the other user's
rev id: 0x100003
all of these are the same EXCEPT the subsystem id, does this matter? does this change the driver?
Now that I found that information, I used the ALC268Installer1 and got no sound after reboot, so I used #2, after that, I get a kernel panic. (Perhaps this is where I made my mistake... I didn't use the patcher since I thought the 268 would be more specific or something... It was late last night) I safe booted and tried many different things to get back to before I installed #1, but I used Carbon Copy Cloner to image my drive and it doesn't seem to let me restore from that image. I viewed the log that was produced from the installer and noticed the files were extracted to /System/Libraries/Extensions, I deleted this and restored the old one from my backup, now the computer doesn't panic, just sits at the mac logo screen loading for a very long time(even in safe boot (-x)), I haven't been able to get back into the OS.
So, now that I've got all of that out there, haha, thanks for reading so far if you have. My questions are... what should I do to get back so I can try the other packages? I have an image of the HDD directly before installing the ALC268Installer1 but no idea how to use it now that I cannot boot into the OS, should I try and copy the files from /System/Libraries on the backup directly to the HDD? I have a distro of linux installed and vista, which are both operational at this time. Is there any way someone could help me find what files to remove manually? Any better imaging software to try? Sorry if I seem needy :) I felt that backing up the HDD twice would do the job, apparently Carbon Copy Cloner isn't quite the software I wanted to use :(
Thanks for any info you may have
-Mike
Computer Type: Laptop
Sound Card Vendor: Sigmatel
Sound Card Model: 9228
Vendor Id: 0x83847616
Working: Headphone Port #1
Not Working: Internal Speakers, Internal Microphone, Headphone Port #2, Microphone Port
Patcher Version used: 1.16
System Version: Leopard 10.5.1
Sound Card Vendor: Sigmatel
Sound Card Model: 9228
Vendor Id: 0x83847616
Working: Headphone Port #1
Not Working: Internal Speakers, Internal Microphone, Headphone Port #2, Microphone Port
Patcher Version used: 1.16
System Version: Leopard 10.5.1
Computer Type: laptop(Lenovo TianYi F50A, Intel ICH7-M Chipset)
Sound Card Vendor: Realtek
Sound Card Model: AL262
Vendor Id: 0x10ec0262
Subsystem Id: 0x17aa8a2d
Working: Internal speakers
Not Working: Internal bass speaker, Mic, Headphones
Patcher Version used: 1.16, 1.20
System Version: Leopard 10.5.0 / 10.5.1
obs: Somebody told me AppleHDAPatcher don't support ICH7-M, It's really? When I use the patcher, it always told me "Unsupported Realtek Chipset"
and I have a question that if I must delete current AppleAzaliaAudio.kext before using AppleHDAPatcher??
Please help me, Thank you very much!!
Here is my dump file from Ubuntu 7.04:
Sound Card Vendor: Realtek
Sound Card Model: AL262
Vendor Id: 0x10ec0262
Subsystem Id: 0x17aa8a2d
Working: Internal speakers
Not Working: Internal bass speaker, Mic, Headphones
Patcher Version used: 1.16, 1.20
System Version: Leopard 10.5.0 / 10.5.1
obs: Somebody told me AppleHDAPatcher don't support ICH7-M, It's really? When I use the patcher, it always told me "Unsupported Realtek Chipset"
and I have a question that if I must delete current AppleAzaliaAudio.kext before using AppleHDAPatcher??
Please help me, Thank you very much!!
Here is my dump file from Ubuntu 7.04:
CODE
Codec: Realtek ALC262
Address: 0
Vendor Id: 0x10ec0262
Subsystem Id: 0x17aa8a2d
Revision Id: 0x100002
Default PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
Node 0x02 [Audio Output] wcaps 0x11: Stereo
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x03 [Audio Output] wcaps 0x11: Stereo
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0x1e]: 16 20 24 32
formats [0x1]: PCM
Node 0x07 [Audio Input] wcaps 0x10011b: Stereo Amp-In
Amp-In caps: ofs=0x08, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x00 0x00]
PCM:
rates [0x160]: 44100 48000 96000
bits [0x6]: 16 20
formats [0x1]: PCM
Connection: 1
0x24
Node 0x08 [Audio Input] wcaps 0x10011b: Stereo Amp-In
Amp-In caps: ofs=0x08, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x00 0x00]
PCM:
rates [0x160]: 44100 48000 96000
bits [0x6]: 16 20
formats [0x1]: PCM
Connection: 1
0x23
Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In
Amp-In caps: ofs=0x08, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x00 0x00]
PCM:
rates [0x160]: 44100 48000 96000
bits [0x6]: 16 20
formats [0x1]: PCM
Connection: 1
0x22
Node 0x0a [Audio Input] wcaps 0x100391: Stereo Digital
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0x1e]: 16 20 24 32
formats [0x1]: PCM
Connection: 1
0x1f
Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x80 0x80] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x80 0x80]
Connection: 6
0x18 0x19 0x1a 0x1b 0x1c 0x1d
Node 0x0c [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
Amp-Out vals: [0x19 0x19]
Connection: 2
0x02 0x0b
Node 0x0d [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 2
0x03 0x0b
Node 0x0e [Audio Mixer] wcaps 0x20010e: Mono Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00] [0x00]
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
Amp-Out vals: [0x00]
Connection: 2
0x02 0x0b
Node 0x0f [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x12 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x14 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x083e: IN OUT HP Detect
Pin Default 0x99130110: [Fixed] Speaker at Int ATAPI
Conn = ATAPI, Color = Unknown
Pin-ctls: 0x40: OUT
Connection: 2
0x0c* 0x0d
Node 0x15 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x083e: IN OUT HP Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0x20: IN
Connection: 2
0x0c 0x0d*
Node 0x16 [Pin Complex] wcaps 0x40010c: Mono Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80]
Pincap 0x0810: OUT
Pin Default 0x99130120: [Fixed] Speaker at Int ATAPI
Conn = ATAPI, Color = Unknown
Pin-ctls: 0x40: OUT
Connection: 1
0x0e
Node 0x17 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x08173e: IN OUT HP Detect
Pin Default 0x01a19840: [Jack] Mic at Ext Rear
Conn = 1/8, Color = Pink
Pin-ctls: 0x24: IN
Connection: 2
0x0c* 0x0d
Node 0x19 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x08173e: IN OUT HP Detect
Pin Default 0x99a3014f: [Fixed] Mic at Int ATAPI
Conn = ATAPI, Color = Unknown
Pin-ctls: 0x24: IN
Connection: 2
0x0c* 0x0d
Node 0x1a [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x08173e: IN OUT HP Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0x20: IN
Connection: 2
0x0c* 0x0d
Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x08173e: IN OUT HP Detect
Pin Default 0x0121441f: [Jack] HP Out at Ext Rear
Conn = 1/8, Color = Green
Pin-ctls: 0xc0: OUT HP
Connection: 2
0x0c* 0x0d
Node 0x1c [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0820: IN
Pin Default 0x593301f0: [N/A] CD at Int ATAPI
Conn = ATAPI, Color = Unknown
Pin-ctls: 0x00:
Node 0x1d [Pin Complex] wcaps 0x400000: Mono
Pincap 0x0820: IN
Pin Default 0x40168a2d: [N/A] Speaker at Ext N/A
Conn = Digital, Color = Purple
Pin-ctls: 0x00:
Node 0x1e [Pin Complex] wcaps 0x400380: Mono Digital
Pincap 0x0810: OUT
Pin Default 0x01451130: [Jack] SPDIF Out at Ext Rear
Conn = Optical, Color = Black
Pin-ctls: 0x00:
Connection: 1
0x06
Node 0x1f [Pin Complex] wcaps 0x400280: Mono Digital
Pincap 0x0820: IN
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0x00:
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
Node 0x21 [Volume Knob Widget] wcaps 0x600080: Mono
Node 0x22 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Amp-Out caps: N/A
Amp-Out vals: [0x00 0x00]
Connection: 9
0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x0b
Node 0x23 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Amp-Out caps: N/A
Amp-Out vals: [0x00 0x00]
Connection: 9
0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x0b
Node 0x24 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Amp-Out caps: N/A
Amp-Out vals: [0x00 0x00]
Connection: 9
0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x0b
Codec: Generic 11c1 Si3054
Address: 1
Vendor Id: 0x11c11040
Subsystem Id: 0x11c10001
Revision Id: 0x100200
Address: 0
Vendor Id: 0x10ec0262
Subsystem Id: 0x17aa8a2d
Revision Id: 0x100002
Default PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
Node 0x02 [Audio Output] wcaps 0x11: Stereo
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x03 [Audio Output] wcaps 0x11: Stereo
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0x1e]: 16 20 24 32
formats [0x1]: PCM
Node 0x07 [Audio Input] wcaps 0x10011b: Stereo Amp-In
Amp-In caps: ofs=0x08, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x00 0x00]
PCM:
rates [0x160]: 44100 48000 96000
bits [0x6]: 16 20
formats [0x1]: PCM
Connection: 1
0x24
Node 0x08 [Audio Input] wcaps 0x10011b: Stereo Amp-In
Amp-In caps: ofs=0x08, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x00 0x00]
PCM:
rates [0x160]: 44100 48000 96000
bits [0x6]: 16 20
formats [0x1]: PCM
Connection: 1
0x23
Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In
Amp-In caps: ofs=0x08, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x00 0x00]
PCM:
rates [0x160]: 44100 48000 96000
bits [0x6]: 16 20
formats [0x1]: PCM
Connection: 1
0x22
Node 0x0a [Audio Input] wcaps 0x100391: Stereo Digital
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0x1e]: 16 20 24 32
formats [0x1]: PCM
Connection: 1
0x1f
Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x80 0x80] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x80 0x80]
Connection: 6
0x18 0x19 0x1a 0x1b 0x1c 0x1d
Node 0x0c [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
Amp-Out vals: [0x19 0x19]
Connection: 2
0x02 0x0b
Node 0x0d [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 2
0x03 0x0b
Node 0x0e [Audio Mixer] wcaps 0x20010e: Mono Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00] [0x00]
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
Amp-Out vals: [0x00]
Connection: 2
0x02 0x0b
Node 0x0f [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x12 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x14 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x083e: IN OUT HP Detect
Pin Default 0x99130110: [Fixed] Speaker at Int ATAPI
Conn = ATAPI, Color = Unknown
Pin-ctls: 0x40: OUT
Connection: 2
0x0c* 0x0d
Node 0x15 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x083e: IN OUT HP Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0x20: IN
Connection: 2
0x0c 0x0d*
Node 0x16 [Pin Complex] wcaps 0x40010c: Mono Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80]
Pincap 0x0810: OUT
Pin Default 0x99130120: [Fixed] Speaker at Int ATAPI
Conn = ATAPI, Color = Unknown
Pin-ctls: 0x40: OUT
Connection: 1
0x0e
Node 0x17 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x08173e: IN OUT HP Detect
Pin Default 0x01a19840: [Jack] Mic at Ext Rear
Conn = 1/8, Color = Pink
Pin-ctls: 0x24: IN
Connection: 2
0x0c* 0x0d
Node 0x19 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x08173e: IN OUT HP Detect
Pin Default 0x99a3014f: [Fixed] Mic at Int ATAPI
Conn = ATAPI, Color = Unknown
Pin-ctls: 0x24: IN
Connection: 2
0x0c* 0x0d
Node 0x1a [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x08173e: IN OUT HP Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0x20: IN
Connection: 2
0x0c* 0x0d
Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x08173e: IN OUT HP Detect
Pin Default 0x0121441f: [Jack] HP Out at Ext Rear
Conn = 1/8, Color = Green
Pin-ctls: 0xc0: OUT HP
Connection: 2
0x0c* 0x0d
Node 0x1c [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0820: IN
Pin Default 0x593301f0: [N/A] CD at Int ATAPI
Conn = ATAPI, Color = Unknown
Pin-ctls: 0x00:
Node 0x1d [Pin Complex] wcaps 0x400000: Mono
Pincap 0x0820: IN
Pin Default 0x40168a2d: [N/A] Speaker at Ext N/A
Conn = Digital, Color = Purple
Pin-ctls: 0x00:
Node 0x1e [Pin Complex] wcaps 0x400380: Mono Digital
Pincap 0x0810: OUT
Pin Default 0x01451130: [Jack] SPDIF Out at Ext Rear
Conn = Optical, Color = Black
Pin-ctls: 0x00:
Connection: 1
0x06
Node 0x1f [Pin Complex] wcaps 0x400280: Mono Digital
Pincap 0x0820: IN
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0x00:
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
Node 0x21 [Volume Knob Widget] wcaps 0x600080: Mono
Node 0x22 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Amp-Out caps: N/A
Amp-Out vals: [0x00 0x00]
Connection: 9
0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x0b
Node 0x23 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Amp-Out caps: N/A
Amp-Out vals: [0x00 0x00]
Connection: 9
0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x0b
Node 0x24 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Amp-Out caps: N/A
Amp-Out vals: [0x00 0x00]
Connection: 9
0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x0b
Codec: Generic 11c1 Si3054
Address: 1
Vendor Id: 0x11c11040
Subsystem Id: 0x11c10001
Revision Id: 0x100200
Computer Type: MoBo Gigabyte M68SM-S2 (Nforce 6)
Sound Card Vendor: Realtek
Sound Card Model: ALC888
Working: Internal speakers
Not Working: other outputs and input
Patcher Version used: 1.20
System Version: Leopard 10.5.1
Couldn't get it to work with other dumps so i share it with you.
Sound Card Vendor: Realtek
Sound Card Model: ALC888
Working: Internal speakers
Not Working: other outputs and input
Patcher Version used: 1.20
System Version: Leopard 10.5.1
Couldn't get it to work with other dumps so i share it with you.
Computer Type: Laptop Inspiron 630m
Sound Card Vendor: Sigmatel
Sound Card Model: STAC 92XX
Vendor Id: 0x83847690
Working: Headphones and internal speakers
Not Working: mute with headphones. mic not tested
Patcher Version used: 1.16
System Version: Tiger 4.8
Obs: Thanks to "spikegotti".I use her files.
http://forum.insanelymac.com/index.php?sho...4890&st=80#
Sound Card Vendor: Sigmatel
Sound Card Model: STAC 92XX
Vendor Id: 0x83847690
Working: Headphones and internal speakers
Not Working: mute with headphones. mic not tested
Patcher Version used: 1.16
System Version: Tiger 4.8
Obs: Thanks to "spikegotti".I use her files.
http://forum.insanelymac.com/index.php?sho...4890&st=80#
Computer Type: Laptop - Medion MEDION MD 96519
Sound Card Vendor: Realtek
Sound Card Model: ALC883
Vendor Id: 0x10718227
Working: Top Speakers, Mic, Spdif
Not Working: Line Out & Headphone
Patcher Version used: 1.2
System Version: Leo 10.5.1
Without line or headphone out, its no good to me.
I prefer the natit clone method, at least it helps me use the headphone jack.
ALC 883 - If running the new 8.8.1 kernel, multichannel out and audio in using a Natit clone method
ps. attached is the linux code dump from ubuntu live cd.
Sound Card Vendor: Realtek
Sound Card Model: ALC883
Vendor Id: 0x10718227
Working: Top Speakers, Mic, Spdif
Not Working: Line Out & Headphone
Patcher Version used: 1.2
System Version: Leo 10.5.1
Without line or headphone out, its no good to me.
I prefer the natit clone method, at least it helps me use the headphone jack.
ALC 883 - If running the new 8.8.1 kernel, multichannel out and audio in using a Natit clone method
ps. attached is the linux code dump from ubuntu live cd.
Laptop: Medion MD 95500
Soundcard Vendor: Realtek
Soundcard Model: ALC 880
Vendor ID: 10ec0880
Subsystem ID : 0x8800000
Working: Line Out (Analog 2ch)
Not Working: Internal Speakers, Line In (although shown in system preferences), Headphones, Digital Out
Patchers Used: all HDAPatchers (when using them nothing works), Beta4some_861_880_models.zip (resulting in whats written above)
Sound makes some crappy noises when volume is set at 100%
System Version: JAS Mac OSX 10.4.9 with 8.8.1 kernel
Codec dump made with Ubuntu Live CD:
Soundcard Vendor: Realtek
Soundcard Model: ALC 880
Vendor ID: 10ec0880
Subsystem ID : 0x8800000
Working: Line Out (Analog 2ch)
Not Working: Internal Speakers, Line In (although shown in system preferences), Headphones, Digital Out
Patchers Used: all HDAPatchers (when using them nothing works), Beta4some_861_880_models.zip (resulting in whats written above)
Sound makes some crappy noises when volume is set at 100%
System Version: JAS Mac OSX 10.4.9 with 8.8.1 kernel
Codec dump made with Ubuntu Live CD:
Computer type:PC
Sound card vendor:Realtek
Sound card model:ALC883
Vendor ID:0x10ec0883
Working:Internal speakers
Not working: -Headphones
-Internal mic
-Line-in
Patcher version used:1.17
System version:Leopard 10.5.1
Working:none detected with patcher 1.20
Codec form Linux
Sound card vendor:Realtek
Sound card model:ALC883
Vendor ID:0x10ec0883
Working:Internal speakers
Not working: -Headphones
-Internal mic
-Line-in
Patcher version used:1.17
System version:Leopard 10.5.1
Working:none detected with patcher 1.20
Codec form Linux
ALC260 Outputs WORKING!!!!!!!!!!
Computer Type: laptop Sony vaio VGN-A417M
Sound Card Vendor: Realtek
Sound Card Model: ALC260
Vendor Id: 0x10ec0260
Working: Line Out, Headphones
Not Working: Mic, Llne in, SPDIF Out
Patcher Version used: 1.20
System Version: xXxTiger 4.11/Kalyway Leopard 10.5.1 EFI
thx Taruga
Computer Type: laptop Sony vaio VGN-A417M
Sound Card Vendor: Realtek
Sound Card Model: ALC260
Vendor Id: 0x10ec0260
Working: Line Out, Headphones
Not Working: Mic, Llne in, SPDIF Out
Patcher Version used: 1.20
System Version: xXxTiger 4.11/Kalyway Leopard 10.5.1 EFI
thx Taruga
working on p5kr with AppleHDA Patcher 1.20
generated my own codec dump
attached file on:
http://forum.insanelymac.com/index.php?showtopic=83793
(dident make tests concerning whats working or not, output is ok, gonna update the post later)
generated my own codec dump
attached file on:
http://forum.insanelymac.com/index.php?showtopic=83793
(dident make tests concerning whats working or not, output is ok, gonna update the post later)
Computer Type: PC Asus P5LD2-X/1333 Intel 945 + ICH7 2GB RAM INTEL 4500 2.2 Core2Duo
Sound Card Vendor: Realtek
Sound Card Model: ALC662
Vendor Id: 0x10ec0662
Subsystem Id: 0x10438249
Working: Line Out, Mic In, Line In, Digital Out (all tested)
Not Working: Volume Control (appears a "blocked" icon when I press volume up and down keys , plus in audio preferences "The select device has no audio controls"). However, the Mute - Unmute control works fine.
Patcher Version used: 1.20
System Version: Leopard ToH 10.5.0 updated to 10.5.1 (EFI 8 +Vanilla)
obs: ALC662 Rev 1.txt from Ubuntu (I modified the subsystem ID ,it was different)
Note to Taruga:
- It seems ALC662 does not support the Volume Knob Widget. I found the datasheet from Realtek which
says something like this , so I guess another method is used for volume sliders support.
Here's the datasheet , in case you need to check this out.
http://www.realtek.cz/download/datasheets/alc662_v1.0.pdf
Hi to everyone. Amazing work to all, thumbs up to Taruga.
This is my first post on the forum.It's been with no doubt the most useful place to make this work.
Sound Card Vendor: Realtek
Sound Card Model: ALC662
Vendor Id: 0x10ec0662
Subsystem Id: 0x10438249
Working: Line Out, Mic In, Line In, Digital Out (all tested)
Not Working: Volume Control (appears a "blocked" icon when I press volume up and down keys , plus in audio preferences "The select device has no audio controls"). However, the Mute - Unmute control works fine.
Patcher Version used: 1.20
System Version: Leopard ToH 10.5.0 updated to 10.5.1 (EFI 8 +Vanilla)
obs: ALC662 Rev 1.txt from Ubuntu (I modified the subsystem ID ,it was different)
CODE
AppleHDA Patcher - 2006/2007 by Taruga v1.20
* Patching AppleHDA.kext to 0x10ec0662 Done
* Checking AppleHDA for patch Done
0001f4a0 cmpl $0x10ec0662,%eax
00020584 cmpl $0x10ec0662,%eax
* Checking for SPDIF Out Detected
* Checking for SPDIF In Not Detected
* Using the following nodes in pathmap
Back Mic: 9 34 24
Line In : 8 35 26
Speaker : 20 12 2
Spdif Out: 30 6
* Copying new config to destination Done
* Repairing Permissions Done
* Deleting Extensions Cache Done
* Patching AppleHDA.kext to 0x10ec0662 Done
* Checking AppleHDA for patch Done
0001f4a0 cmpl $0x10ec0662,%eax
00020584 cmpl $0x10ec0662,%eax
* Checking for SPDIF Out Detected
* Checking for SPDIF In Not Detected
* Using the following nodes in pathmap
Back Mic: 9 34 24
Line In : 8 35 26
Speaker : 20 12 2
Spdif Out: 30 6
* Copying new config to destination Done
* Repairing Permissions Done
* Deleting Extensions Cache Done
Note to Taruga:
- It seems ALC662 does not support the Volume Knob Widget. I found the datasheet from Realtek which
says something like this , so I guess another method is used for volume sliders support.
Here's the datasheet , in case you need to check this out.
http://www.realtek.cz/download/datasheets/alc662_v1.0.pdf
Hi to everyone. Amazing work to all, thumbs up to Taruga.
This is my first post on the forum.It's been with no doubt the most useful place to make this work.
Computer Type: MCP61
Codec: Realtek ALC861-VD
Address: 0
Vendor Id: 0x10ec0862
Subsystem Id: 0x10ec0862
Revision Id: 0x100001
System Version: AMD 10.5.1
Patcher Version used: 1.18 1.19 1.20 TarugaALC862Installer1 TarugaALC862Installer2
ALL NOT WORK ! ! !
Codec: Realtek ALC861-VD
Address: 0
Vendor Id: 0x10ec0862
Subsystem Id: 0x10ec0862
Revision Id: 0x100001
System Version: AMD 10.5.1
Patcher Version used: 1.18 1.19 1.20 TarugaALC862Installer1 TarugaALC862Installer2
ALL NOT WORK ! ! !
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.