Hello,

Do you think it will works with an asus P5GC-MX ?
Does the command line is to replace and chmod to root:wheel ?

Best regards,

Any news on the X4500 yet?

I'm planning to build a HTPC with the Intel DG45FC ITX.

Mac OS X Leopard 10.5.4
Intel 950 GMA with 10.5.2 Framebuffer kext
Highest Resolution: 1280x800
~~~~~~~~~~~~~~~~~~~~~~~~~~
System Profiler Information
~~~~~~~~~~~~~~~~~~~~~~~~~~
Vendor: Intel (0x8086)
Device ID: 0x27a2
Revision ID: 0x0003
Core Image: Hardware Accelerated
Quartz Extreme: Supported
QuartzGL: Supported
~~~~~~~~~~~~~~~~~~~~~~~~~~
I can change resolutions fine. I have random mouse artifacts usually when doing something with text (like renaming a file or editing text in photoshop). Recently I even had a big graphics glitch whenever I opened up the root of my HDD (buttons were all corrupted, text garbled, everything unreadable).

I'm looking for a fix to get rid of the mouse artifacts, and I'm looking to know what Nati and AGPGart is and if they can do anything to my graphics card.

Hello,

Can someone upload the 10.5.2 kext files + framebuffer for GMA950 and step by step guide how to do it.

Regards,

after install iatkos 10.5.4 i geting boot error black screen
please help

^^^^ Yep me too.

I had it working when I had Kal 10.5.2 installed a few months back but i cant remember what i did to get it running.

Oh well guess ill have to re-read this thread till somthing jogs my memory.

Its a toshiba laptop with 945 chipset with the 950 graphics chip. (In case anyone knows off the top of their head)

hi.. i installed leo4all on my acer aspire 4715z, i did not have any problems with installation. It rebooted and played the welcome movie then the welcome screen appeared, so i answered it up to the window that has the "do you already own a mac" screen..i chose do not transfer then after i click continue it went back playing again the welcome movie. it does that over and over, so i downloaded kaly and again i installed with no problem, but same outcome. is there something wrong with my laptop? help please...i've been trying to figure this out for more than two weeks now. TIA

can you share your kext file? or whatever that make a full display graphics because Quartz Extreme is not supported on my PC.

any help is appreciated.

Thanks!

i have a hp 6710b laptop and the x3100 in it was automaticly detected after installing kalyway 10.5.2
did not install any kexts. just worked natively. updated then with 10.5.3 kalycombo and then 10.5.4 via updater.
all still works fine.

can you please post your extensions? i'm having same problems as everyone here, i have an ASUS P5LD2 VM SE motherboard, and has a GMA950 chipset with id 2772... i have 10.5.4 and i have a lot of artifacts specially using Adobe Flash CS3 and Office2008.

i need to be able to change to 1440x900 and 1360*768 since thats my 19" lcd monitor and my lcd tv resolutions.

refresh rates... does it matters using lcd ?

i tried charles extensions, artifacts are almost gone, but now i cannot see video in frontrow, neither movies, dvds or trailers...

weird...

if i play them in quicktime its ok, but not through frontrow, anyone knows why?


ok, it was because i lost quartz, i reinstalled 10.5.3 gma950 extensions and now its back, but i have artifacts again, jajajaja.

so, which framebuffer i have to use?

Hi, sorry for my poor english...

I had only the 1024x768 resolution.

I have installed charles extensions, but I lost QE.
Than I have extract with Pacifist the GMA950 kext from the Kalyway update 10.5.3.

With KextHelper I have reinstalled and all works fine.

I don't have artifacts at this moment.
And the change of the resolution works fine.

I use a 42" LG @ 1920x1080 60MHz.

My hardware is the signature

Thanks CHARLES!

I have Vaio VGN-C240E, w/Intel 945 Integrated video,

Installed Kalyway 10.5.2/w gma950, worked on external monitor, and internal(if external was connected while boot, then disconnected). Both displays appeared in mac system info. Was able to set 1280x1024x32 on external (syncmaster tft) and 1280x800x32 on internal lcd. Unstable behavior.

Then after installing 10.5.3 combo update + 10.5.4 apple update - worked only on external, and it was the only display detected by macos.

No additional drivers installed.
Then added magic string to Boot.plist

(no line breaks), tnx to amuroray (of Netkas forum)
Had this situation (lcd+external, lcd, external)

http://forum.insanelymac.com/index.php?act...st&id=23285

and Natit.kext ( http://forum.insanelymac.com/index.php?s=&...st&p=501584 )
Didn't delete any kexts (including framebuffer etc)

Now have only internal lcd fully accelerated working but w/ 1280x768x32.
Have blank space at the botton (1280x32).

If connect external display, have this again
http://forum.insanelymac.com/index.php?act...st&id=23285

Any chance to make it fully working?

X3100 sleep trick users, take a look here
Works great!

Wanted to add:
Instead of Natit.kext , i used LaptopDisplay.kext with the same result.

Same result that SleepHack??

nono, i added to my prev post.

Hi here is a copy of my IOREG. I reckon if we could find a way to make a EFI string it might help us all get this working right. I have it working alright now with full QE/CI atm but it took sometime to get it working.

What exactly is the Mirror feature and is it supposed to be on?
Click to view attachment

I have it off...
Damn! How did you manage to get 1280x800?
What drivers are you using?

Does anyone works intel GMA X3100 in Fujitsu Laptop?

Hat jemand den Treiber für den HP 6720s?

I have kalyway 10.5.2 updated to 10.5.4 on an HP dv9500t with an Intel X3100. I installed the Intel X3100 drivers from the Kalyway install disk and it works at full resolution (1680x1050) but QE/CI is not enabled and the cursor is garbled, it is split into two pieces about 1" apart horizontally and separated into short horizontal lines spaced about 1/16' vertically (I will attach a screenshot soon). I am not worried about the cursor as it still functions and I have gotten used to it but I would really like to get QE/CI working and paulicat's first X3100 natit.kext did not work. Can anyone help me get it working?
Click to view attachment

Here is the infro from the System Profiler:

Intel GMA X3100:

Chipset Model: GMA X3100
Type: Display
Bus: Built-In
VRAM (Total): 144 MB
Vendor: Intel (0x8086)
Device ID: 0x2a02
Revision ID: 0x000c
Displays:
Display:
Resolution: 1680 x 1050
Depth: 32-bit Color
Built-In: Yes
Core Image: Software
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Not Supported
Display Connector:
Status: No display connected

EDIT: Added picture and system info.

Update: I managed to fix both problems in one fell swoop, I reinstalled the Leopard Graphics Update using Pacifist, deleted all the GMA950 .kext and .bundle files as well as AppleIntelIntegratedFramebuffer.kext (or whatever its called), then used the Natit.kext from mitro (not sure if that actually mattered but it works so I'm not complaining).

If anybody has this problem now you can fix it!

Thank you. This solved my problem! Motherboard Asrock Conroe-1333 D667. Video:

Hi, I have an Zepto 3215W Laptop with Intel GMA X3100. I downloaded the Natit.kext and Installed it with that kexthelper. It said "Prey and reboot" but after the reboot I still cant change resolution. It's only 1024x768 but I need 1280x800.

I dont understand much about that framebuffer thing. Please could someone step by step tell me what to do? I have Leo4AllV2

hey there! many thanks to all you guys which did a great job!

i spent a lot effort during the last 2 weeks and now finally got a more or less satisfying solution on my laptop..

i am using a fujitsu-siemens lifebook e8410
(core2duo on gm865 chipset with x3100, display-resolution is 1680x1050)

i am currently running osx 10.5.1 and my gfx-info shows this:

Chipset Model: GMA X3100
Type: Display
Bus: Built-In
VRAM (Total): 144 MB
Vendor: Intel (0x8086)
Device ID: 0x2a02
Revision ID: 0x0003

the closest resolution (to the native 1680 x 1050 one) i can get is 1680 x 1024
(i increased step by step and on 1025 height the screen goes light/blue .. but 1024 looks interesting.. as 1280x1024 is often used.. maybe anywhere in my kext's or somewhere else this is fixed..?! noobish idea.. )

=> the remaining 30 pixel show artefacts..

but however i am satisfied that CI/QE is enabled


my steps are to following
1) create a chameleon-boot-cd (or usb/sdcard/partition..)
2) boot with the cd and then run osx-leopard setup using a retail dvd and boot-parameter "-x" (safemode)
3) 10.5.1 vanilla running.. then add the natit.kext from paulicat
4) delete all gma950 and intelintegratedframe... from library
5) restart.. without -x and use an external display
6) create a customized resolution in switchresx (1680x1024)
7) reboot -> internal display works well..


(if anyone has problems to understand my bad english, please tell me and i will hopefully be able to improve..)

I have made it a lot easier now using EFI strings for the X3100. Take a look at the link below it tells you how i did it and i'll Make a new Topic so that people can upload their RAW EDID's and full IOREG dumps for me to make the EFI strings for them. If anyone else would like to help PM me as i have a funny feeling that the forum Will be Filled right quick. If some one can send me a GMA950 Apple mac Dump and a hackingtosh GMA950 IOREG i might even be able to help you guys to. If the first guy whom sends the Dumps i need also Send their RAW EDID i'd be grateful!

http://forum.insanelymac.com/index.php?sho...mp;#entry862722

hello,
im using intel 950
sometimes booting is OK
but sometimes NOT OK.


this is my problem http://forum.insanelymac.com/index.php?sho...mp;#entry862802

i hope you all can help me

Right tutorial is now here

i have posted my dump files there.
thanks in advance

can u help me with my problem ?
this is my problem

http://forum.insanelymac.com/index.php?showtopic=120715

I've got an unusual problem. Whenever I install ideneb 10.5.4, or any distro for that matter that is 10.5.4, my screen is unusable upon boot. The screen flickers on and off, as well as side to side MANY times a second, which makes it next to impossible to even select shutdown from the menu. This only happens however if I have both cores enabled on my laptop. I have the gma950 driver installed from the ideneb dvd, but should I try and reinstall the driver, or will this not help? Any help would be appreciated.

Thanks

currently i was running kalyway 10.5.1 and everything worked ethernet my gma 950 sound video time machine all worked...now i started to read alot about these kalyway updates..so out of my own stupidity i updated my machine from 10.5.1 -> 10.5.4 ......Now everything working beautifully but the only problem is that i cant change my resoulution and my mouse becomes invisible when i put it @ the Dock or on a video..(wich lags)..
ive tried every natit.kext and all of paulicat's kext and none worked.....man i regret updating this {censored} stinks...
if anyone has a kext that works for GMA 950 on a machine running kalyway 10.5.4.....it would be grateful..

anyone...????

Hi,

test Jas 10.5.4 on a Dell Studio Hybrid. Boot stop on blue screen with vga output, or goes power off with dvi-d output. I tryed the sleep trick but got the same result. Remove x3100 everything just work but in vesa mode.

I'm going to test EFI string or 10.5.2 kext. If anyone has advices or ideas ?

Ok well I have the x3100 graphics card working with QE/CI on my Fujitsu T4220 SXGA+ tablet. One little issue I have noticed is that OSX crashes without fail when I try to switch to the native resolution. ( 1400x1050 ) I have to use SwitchResX to create the 1400x1024 resolution and it works great except for the missing 26 pixel rows at the bottom of the screen. Is this a driver limitation? I don't have any other monitors to test anything higher than 1440x900 on an external screen.

PAULICAT!!!! if you're out there I need some help or maybe some advice.

I tried using the EFI strings and I was able to get it to select the 1400x1050 without crashing however The screen was stretched out and distorted when I did that. But I was able to get my current setup with EFI strings. If anyone has a working EFI string with Res Change with supports resolutions higher than 1280x1024 that would be awesome. Just give me the HEX and I'll add in my EDID into it. Thanks guys. Good luck all.

Oh one more thing. Has anyone gotten their x3100 to work with the newer 3100FB.kext, version 1.5.24? If seen alot of success wit 1.5.18 but I was hoping that maybe the newer version will fix my resolution issue. And also has anyone gotten regular res change with stretching working? Couldn't figure that one out either.

Worked like a charm. Thanks, man.

Hey guys i'm kinda new to this mac thing .
I build a pc myself and it has a asrock 1333 dvi/h motherboard with the intel 950 gma, I installed kalyway 10.5.2 and everything works so far, except I can't change the resolution to 1280 x 1024 ,it's now at 1024x 7hundred something. I'v ben searching how to do this but can't realy figure it out, could anyone please help me?

hehe ,the Charles vdg method finaly worked,thanks , i allready tried it 4 times but now i finaly works:S but now it seems like my usb doesn't work anymore:S

Hi I need gma950 driver for 10.5.2, need 1366*768, only get 1024*768

Still unable to get a kext to load on my machine. It is an Asus EEE Box with the 950, DVI. Everything else runs super. If relevant it was loaded up with the newer boot method. 132 didn't do so hot, but option #2's 146 worked like a charm.

Ideally would like to hit 1900x1200. Windows didn't have any trouble at that res. I can scale back animations and wackiness Leo does.

Don't know if the ioreg dumps are still helpful, but I included one in the case they were.

Kind regards,
Macinbytes

None of my menus are drawing correctly. It happens on the top menu bar and any drop down menu i use in applications. Just shows a garbled mess, then when I click off the menu it flashes the correct menu selections for a split second. Anybody else having this issue that may know of a fix?

Currently running Intel GMA 950 with Natit.kext installed on Kalway 10.5.2

Resolutions work perfectly, just cant see any menus.

Ok im using Kalaway 10.5.2 and GMA950 with the problematic 0x2772 ID. I have FUll QE GL and Resolution Change support. And i have no problems with menus or mouse tearing. I dont know why people are having problems.

Heres a screenie.

Let us know when you have it working on 10.5.4.

I have used the Kalway 10.5.2 DVD with the old framebuffer from tiger on my Sony VAIO SZ notebook with no problems, other than minor tearing (I can live with that). For some reason, the new method with the Leo framebuffer and the Alkor kext causes this notebook to default to the external VGA port, leaving the internal LCD blank (white). I am at a loss as to why 10.5.2 one will work with the internal LCD and one simply won't. Mabye something funny with the Sony hardware. Has anyone been able to get 10.5.4 GMA950 on a VAIO SZ working? Thanks.

U can still update to 10.5.4 by using the same old appleintelintegratedframebuffer 1.4.18 ( from tiger ), the rest of the GMA950 kext can be updated except the leopard framebuffer.

Mines a bit weird though, kextstat shows mine loaded with gma3100 and gma950 together...

But still i get those minor tearing...

Works spot on. I don't understand why the 10.4.8 framebuffer works when the new leo one does not? Thanks.

Unfortunately I can't really use the 10.4.8 framebuffer on 10.5.4 with desktop gma950.

I start getting a lot of mdworker errors on drives and usb devices take 15 seconds or longer to mount/unmount.
Other than interfering with my disks and usb, it works

With vanilla 10.5.4 gma950 and frame buffer kexts, the gma950 is recognized with QE/CI.
However Frame buffer will not load and no resolution changes are possible (even with a kernel flag for it).

Interesting...

I was doing some simple strings comparison on the 10.4.8 vs. 10.5.1/10.5.4 AppleIntelIntegratedFramebuffer and noticed that the 10.5 ones include the AAPL options that natit would traditionally set. These are absent in the 10.4.8 frame buffer.

10.5 frame buffer hardcoding the display settings overriding natit gma?

There is a display-overrides option as well and have messed with that trying to add it as a dict with AAPL options in Info.plist with no joy so far.
Serious wag on trying that but need something working without conflict on this.

This is on a desktop gma950 (gigabyte 945GCM-S2C).

So basically wat u are trying to state is Leopard recognize your GMA950 except it doesn't load the intelintegratedframbuffer.kext..

Have u tried manual kextload your original framebuffer?