Ok so PCIe X1000 series work fine but not AGP. (blue screen loading OSX)

Just put ATINDRV.kext from 10.4.10 and IONDRVSupport.kext from 10.4.7 into your Leo installation, and of course natit (the one you used in Tiger is fine) and voilà framebuffer + QE/CI support with your AGP card in Leo !

Btw if you still don't have QE/CI, don't forget to add your product id into System/Library/Extensions/ATIRadeonx1000.kext/Contents/Info.plist

Have a nice day

my x1600XT works on Leopard, but no resolution selection and some artifacts on the screen.
Any clues?

Did you use BrazilMac's guide & kexts? If so, replace Natit.kext with DiaboliK's NatitX1600.kext - chmod/ chown/ reboot - done...

Hmm, my X1600 Pro works just fine with full QE/CI using Leo ATI drivers w/manual edit for pci id + the same Natit as I used in Tiger.

Ok this is because you have a PCIe card, I just edited my topic.

Ah. True

Yes I did.

Will give a shot with diabolik´s kext.

Thanks.

In my case, I have a 71c2 256MB AGP x1600 Pro.
I have to put ATINDRV 10.4.5 and IONDRVSupport 10.4.7 in the extensions folder.
Install natitx1600 and edit info.plist in ATIRadeonx1600.kext.
Is there anybody succeed CI/QE/Resolution enabled by ATIInjet for AGP X1600?

And I have x1600 Pro AGP..
I see only blue screen and spire..
I didn't use natit in Tiger and I have CI/QE/Resolution.. If somebody get x1600 AGP work can you give your files, please?
I have 71c2 and 1002..

I have made a driver installation package... find ur device id in the list and install... let me know how it works out for u. http://forum.insanelymac.com/index.php?showtopic=69345

I Have 71C2 too, to have QE/CI I just edited info.plist from ATIRAdeonX1000.kext and put old IONDRV + ATINDRV as told in my first post (you can get those from apple's website dl/ing 10.4.7 Delta update and 10.4.10 delta update

MacMan2007
After installation package I see blue screen and cursor.. When I deleted ATIinject.kext and modify ATY_Wormy.kext.. After restart I see blue screen again..
cyclonefr
Do you have Natit or something else installed?

cyclonefr
There is no file IONDRVSupport.kext in 10.4.7 Delta update..

I do have natit. Then I got the file from Combo update, so it must be from an older build

@caclonefr: can you tell us which file (updates) exactly you downloeded for the IONDRV and the ATINSDRV?
I'll need them tonight. What I have is a 10.4.7 DVD by JaS. That's it ;-) Ah, and a 10.4.9 by UphuK ;-)

Thanks and greetings
KlyX

Click to view attachment

And here are the files you need, to get a ATIRadeonX1600Pro (256MB) workin'.

http://rapidshare.com/files/68289891/ATIRa...600Pro.zip.html

Install: Just move/backup originals, copy the new ones to /Sys.../Lib.../Ext.../, fix perms (manually), done.

Note: Don't install the AppleI386PCI.kext unless you know how to add your DEV ID to it, to get AGP working!
Btw, i dunno if it will even work for you, to get AGP with that kext, so...

-=Michael=-

ميكائيل/ميكا
Thank you very much! It works for me!

please can you post the 10.4.10 atindrv.

Nice X wallpaper Where did you get it ?

Uhmm, i made it myself................ well, i made it with combustion.

Click to view attachment

-=Michael=-

here it comes enjoy.
EDIT : ATINDRV package has been removed cause i messed up a file.

Here comes the new solution for 10.5.1 WORKING

Thanks.
Natitx1600 has IOPCIMath with string '0x00001002&0x0000ffff'
Its necessary to add device ID. i.e change to '0x71c210002&0x0000fff' for my card.
Thanks

you r the man.your r the best of best.my system is like yours.P4P800-X,Sapphire x1600 pro agp (But its id:71ce gddr3) and P4 3.0 E ), I follow u with http://www.x86dev.org/forum/index.php?PHPS...p;topic=265.160 and this section.

have a nice day.
have a good works.

&0x0000fff' - this is a mask. Erase it or no sense to write DevID

Hi

I have an ati mobility radeon x1700.

Will this driver work for me?

Danks

bonjour cycloneFr,

can you tell me 2 things :
using your kexts, do you get pure DVI without VGA adapter?

can you change resolutions?

I solved the QE/CI with the MacMan2007 kexts (see sig) but still cannot change resolutions and have some mouse tearing.

soooooooooo, how well is your card performing with your kexts?

thanks cheerio,
ninetto

I can't speak about DVI, since i'm using VGA for both of my screens.

No bugs, it just performs bad in OpenGL because it's AGP, but no tearing, it's perfect. And dual screen works in mirror.

My Experiment for-those-who-might-be-interested:

using MACMAN2007 kexts - NO Attiinject/manual method (see sig) gave me "pure" (no VGA-adapter) DVI with QE/CI but no resolution change and some mouse tearing.

using the kexts provided by CYLONEFR (see post above) with Natit gave me resolution changes with QE/CI but suddenly the DVI port would not work (without VGA-adapter)

What is frustrating to me is my laptop has the ATI mobility x1600 with DVI-port and not only does is work perfectly at full resolutions I get complete TRUE dual-monitor support at different resolutions. I would not call "mirror" really dual monitor capability.

In the end I think I will just give up and grab a cheapo nvidia AGP card, but I HATE GIVING UP on these things. The machine should do WHAT I TELL HIM and not vice-versa!!!!

foward thru the fog,
ninetto

i messed uup with ATINDRV .10 and putted the 10.5 which avoid CI/QE.

I fixed it with ATINDRV 10.5.1 and a new package let's enjoy it
Requires 10.5.1 installed

Will these work for an X1650 Pro? Do I just need to change the DeviceID?

Anyone here have an X1650 Pro working (QE/CI and dual DVI)?

I have problems with my saphire X1600 pcie, no QE/CI on leo 10.5.1 some idea?
I´m nub (sorry for my english)

Hi!
I'm a Hackintosh, and I wan't to ask, that will the Sapphire Radeon X1650PRO 512MB DDR3 AGP work for me with QE/CI/All resolutions/the 512 VRAM and with both Tiger and leo?

And if not, then with which x16xx series card will work perfectly?

THX!!!

Hi!

That´s the solution... Works perfectly on a Asus A8V Deluxe with X1600 AGP 256MB...

Big thank 4 it!!!


Rgds.

Hello,

I have installed Leo since 2 days :-) Now my biggest problem is to make my Radeon X1600 work, I have namely 2 problems:
- I get small square artifacts under my mouse (sometimes)
- I have only 1024x768 (while the native res. is 1280x800).

I (think I) installed the package posted by Cyclonefr (because I'm a greenhorn ). I put the files in /System/Library.
Do I have to copy them in /System/Library/Extensions ? Do I have to fix the permissions afterwards?

Please post an answer to those simple questions. In a few hours I'll try several other options and if I should be unlucky and all this wouldn't work, I would like to find one more hope here:

My System:

VBI ASMobile S96Jm
Core 2 Duo @ 2 GHz (core solo)
2GB RAM
160 GB HDD SATA-II
ATi Radeon X1600 (artifacts, 1024x768 ONLY :-( )
Realtek ALC882 (working with Azilia patch)
Bluetooth (working out of the box)
CardReader (would appreciate some ideas)
Intel 3945abg (not working, I saw here that there isn't even a chance :-( )

Thank you in advise! You guys RULE!!

P.S.: Please don't post links on rapidshare and so on. They all get broken in a few days, it is not serious.

Nvm I figured it out and the drivers work perfectly with my Diamond ATi Radeon X1600PRO 512MB AGP.

Thanks bunches.

hi folks!

i worked since 2 days to get my gfxcard to work with full QE/CI and solutions!
Now everything runs fine but no DV DUALSCREEN!!!

I have a ATI X1600 PCIE 256MB 1002 Dev 71C2
Leo 10.5.2 installed with kaly!

ANY IDEAS OR SUCCESS AROUND WITH THIS CARD AND DUAL SCREEN ?!?!?!?


here my configs:
ATI Radeon X1600:

Chipsatz-Modell: ATY,RadeonX1600
Typ: Monitor
Bus: PCIe
PCIe-Lane-Breite: x16
VRAM (gesamt): 256 MB
Hersteller: ATI (0x1002)
Geräte-ID: 0x71c2
Versions-ID: 0x0000
EFI-Treiberversion: 01.00.068
Monitore:
F173:
Auflösung: 1280 x 1024 @ 75 Hz
Farbtiefe: 32-Bit Farbe
Core Image: Hardware-unterstützt
Hauptmonitor: Ja
Synchronisierung: Aus
Eingeschaltet: Ja
Quartz Extreme: Unterstützt
Rotation: Unterstützt
Monitoranschluss:
Status: Kein Monitor angeschlossen

just FYI, it still work with new 10.5.2 graphics update without replacing any file.

Hi!
Under 10.5.1 I was able to get CI/QE enabled editing the device ID's in .plist and in the ATIRadeonX1000 binary but under 10.5.2 I can't get it enabled. I get a blue screen. I have an X1600 PCIe ATI RAdeon with device id=71c3. Help would be much apreciated.

Thanks

what do you mean with FYI ?

yes only need IONDRVSupport from 10.4.7 that ive delivered on the previous post. ATINDRV 10.5.2 now works on X1600PRO AGP
only moidify the ATIRADEONX1000 plist to match ur device id : 71C2

thx but do you have dual screen DVI ?? work it?

i have monitored screen (both the same picture) never had DUal screen on my AGP card

I used NatitX1600 and IONDRVSupport from cyclonefr package (10.5.1.X1600Pro.zip), modified the original 10.5.2 ATIRadeonX1000 with my device id (0x71c21002) and worked for a Sapphire Radeon X1600PRO 256 AGP on a Zephyroth 10.5.2 AMD EFI fresh install.

Thank you.

Hi people, i have some questions to get me going with OS X.

I have searched the forums for a long time now but i am missing some steps how to actually do a driver install.

Everything is working okay except my video card driver. Using Zephyroth Leopard 10.5.2 version.


What is the code for my card: Sapphire Radeon X1650PRO 512MB AGP to write in the plist file?

I have the following code from System Profiler: 0x71c6 <-- but that one doesn't look like anything i find in the Info.plist file.

Those look like:
<string>0x71C21002 0x72101002 0x71DE1002 0x71461002 0x71421002 0x71091002 0x71C51002 0x71C01002 0x72401002 0x72491002 0x72911002</string>

^ Taken from the ATIRadeonX1000.kext/Contents/Info.plist file


What is the correct way after editing that file to install that driver?
Just grabbing/copying the ATIRadeonX1000.kext dir to /System/Library/Extensions/ then reboot or is there another step to be taken also before reboot? (There is already a /System/Library/Extensions/ATIRadeonX1000.kext dir there. Must that one be deleted/backup before moving the newer ATIRadeonX1000.kext dir? )

What do i need to with the other dirs:
ATINDRV.kext IONDRVSupport.kext NatitX1600.kext <-- do i need to edit those to and copy them to /System/Library/Extensions/ also or just the ATIRadeonX1000.kext dir?
Toor.

Hi toorsel,

im struggling with the same problem on my Sapphire X1600Pro 256 Mb.
Just add 1002 (Vendor ID for ATI i think) and you´ll be fine on that step. Add 0x71c61002

Just be sure to set the correct permissions and ownership on the .kext folders you manipulate.

You can do this using the Terminal (->Utilities) using the following commands :

cd /System/Library/Extensions
sudo chown -R root:wheel ATIRadeonX1000.kext
(this will set the owner root and the group wheel recursive for all files in this folder)
sudo chmod -R 755 ATIRadeonX1000.kext
(this will set permissions for the files, where the first digit represents the rights of the owner, second is the rights for the group and the third digit is for anybody else. the digits are build like 4 = read, 2 = write, 1 = execution, so you simply add up 4+2+1 for 7 and so on)

You can copy the modified kext over the existing one, thats no problem.

Im not quite sure about your last question, there are a lot of different methods that seem to work. Some ppl are running great on just adding their id to the Info.plist in ATIRadeonX1000.kext. You´ll want to try that first. Im going crazy, cause none of those methods work for me here with a (0x71cd). Good Luck !

@Bon Scott
Many thanks to you - your my hero! After a tremendous try & error session over several days and nights, I finally found your fantastic advice! Believe it or not (everyone who`s reading this) - my ATI Radeon X1600XT were recognised correctly and set to the right resolution of 1680 x 1050 on my Samsung SyncMaster 2232 with QE/CI (only left DVI connector, but I don`t mind)! Thank god, now I can throw away all the unnecessary kexts into trash.

So - up to the next challenge: soundcard....

Ok, sorry about that, I know this thread is old ... but I have a question !

I have a ATI Radeon X1600, and I try to set it ...

I change my DEV ID in the ATIRadeonX1000.kext, and install IONDRVSupport from cyclonefr package (10.5.1.X1600Pro.zip), reboot.

Now I have some glitch on my screen, I can't change the resolution ...

I tried to install NatitX1600 from the package, when I reboot its said : Bad installation, could not load .kext ...

What can I do ?

Thanks to all !

Zazakallahu khairan. Thanks for nice wallpaper.

Did you set the permissions correctly?

Yes I do !

With Onyx soft !

Other idea ?