P.S.
Attention! I end driver for x1950 pro!
Situation heavy! Job is finished !
Good-bye!
----------------------------------------------

Hi all Children!
At last I have made AtiradeonX1000.kext, ATIRNDRV and ATINDRV.kext ! Full works QE/CI/OpenGL/Rotation/ on dual DVI !!!
Work DUAL Monitor ! You try!
Enjoy!

Hi ALL !
Work the DRIVER'S after SLEEP !!!
May 18, 2009 !
For Leopard 10.5.5 download ATI_X1950Pro_1055
For Leopard 10.5.6 download ATI_X1950Pro_1056
For Leopard 10.5.7 download ATI_X1950Pro_1057
September 16, 2009 !
For Leopard 10.5.8 download ATI_X1950Pro_1058

May 24 2009 !
For Tiger 10.4.11 download ATI_X1950Pro_1011

July 6 2009 !
For 7280 and 7288 - SNOW LEOPARD 10.6 download ATI_X1950Pro(GT)_10a380_without_64bit
September 16, 2009 !
For 7280 and 7288 - SNOW LEOPARD 10.6 download ATI_X1950Pro(GT)_10a504

If "ATI Unknown card..." , download the natit.kext




IF NOT WORK , THEN We write to the terminal:

sudo -s also enter the password root!
chown -R 0:0 /system/library/extensions
chmod -R 755 /system/library/extensions
rm /system/library/extensions.mkext
rm /system/library/extensions.kextcache
kextcache -k -z /system/library/extensions

You no should write command in terminal "rm -r /System/Library/Extensions/ATI*" !

REBOOT!!!
Enjoy!

Oh my God! If this is real i will will be eternally in your debt good sir! Have been trying to get my x1950 to work for so long

Hope this is true

have been waiting for ages

You Test !!!

Oh,My God! Great working! Thanks a lot!!

Thank you, Bronya, but my monitor ony show 1024x768, it can manual add any other screen resolution?

Yes, you should register the rights! In single user in boot it is necessary to write -f -v ! At you what version of system mac os x?

Hi, Bronya, I can fixed screen resolution, It's great working, Thank you again. my osx version is 10.4.10. Now ATI 1950 PRO at this way!

Well done dude! Thanks alot for this, works perfectly. Now my hackintosh is perfect. Loving OSX by the way, have been a linux guy for years (and windows when the time calls for it) but OSX is impressing me alot

marvelous! Thank you! Works fine with my Powercolur X1950 pro AGP version. Now just waiting for the DVI to work!

Works nice and running 1680x1050 on DVI so i got it working but dont ask me how ^^ Club3D X1950Pro PCI-E

How?

If at you has earned, help each other!!! Also write as you it has made? Thanks!!!
At you what dev id?

At me DVI has earned, but does not work QE/CI! Works only VGA!
I try to correct...

Just a quick question, which system works on? 10.4.8, 10.4.9 ?

And THAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAANKS A LOT BRONYA

ANY !!!

First I installed jccools X1950XT driver then I istalled all kext from Bronyas x1950pro drivers but i dont installed ATINDRV.kext.. Then I installed atidisplays4-5-7 and then it worked for me

using 10.4.10

ID 7280 1002

both QE/CI are working

X1950 GT  ID 7288 no working yet

X1950pro AGP 512mb finally completely working~~! Thank you!

Did you follow Nimpi's instruction?

hello bronya
how can i changer the screen resolution like 1440x900?

You can change it in screensettings

if you dont can change it there you can add
<key>Graphics Mode</key>
<string>1440x900x32</string> "change too the resolution you want"

in your com.apple.Boot.plist

write it under the <key>Boot Graphics</key>
<string>Yes</string>

x1950gt plz dev. ID 7288

Hello. I have taken from jccools X1950XT - does not work DVI and qe/ci!!! And ATINDRV.kext you can take another! And looking for whom works DVI and for whom does not work DVI!Why it is necessary? There is a driver which it is possible to change resolution!Take here it. 7288 --> Click to view attachmentYou test !

because of my lcd screen use 1440x900

The monitor means at you shows up to 1440x900 a maximum! At everyone different monitors.

At me a maximum 1920x1440

i use samsung 931bw ,the best resolution is 1440x900, but i can not find the 1440x900 in displaysettings

Try take natit.kext from jccools or Diabolik and edit info.plist!

You can download program DisplayConfigX and add resolution 1440x900 !!!

Bronya, I think Nimpi is right. I did it with my Powercolour 1950Pro AGP now.

1. Install jccools driver first, remove everything except ATINDRV.kext
2. Copy everything from your package except ATINDRV.kext to /System/Library/Extensions

I have ATI Displays 4.5.9 installed before these steps so I don't know whether it will cause any trouble.

I had kernal panic with AGPGart, once removed it everythink is just working fine! DVI with CI/QE full res!

On this DVI out issue my guess is if your card has 1 VGA + 1 DVI then you are {censored} out of luck. Nimpi and Krell both have dual DVI out 1950pros.

To Nimpi and Krell, does dual display (extended desktop) work?

won't work on



with d-sub(via adaptor) shows white screen, with dvi - black screen

Sorry I don't have another display at the moment.

it everythink is just working fine! DVI with CI/QE full res!

but atidisplay not works,i use macosx 10.4.10

Forgive for a mistake, try here itClick to view attachmentTake mine atindrv.kext from the driver 7280, or take any natit.kext and atindrv.kext, and then check up!:)

krell , for me works DVI, but does not work qe/ci... Something at me not so.

This is fantastic. I'm going to try this out once I reinstall OSX. Kudos all around for not leaving us 1950 owners in the dark.

woot works on x1950gt (7288), use the atindrv from jcools package it works QE/CI for desired res set in com.apple.Boot.plist
no extended desktop

here's the package for the x1950gt:

Click to view attachment

don't forget to repair permissions

Works for me!
Clean install 10.4.10 AMD Test 01
DVI/all full/still pci(agpgart get me to krenel panic)

Thanks!!!

Edit: I'm stupid...everything is ok except agpgart...

Hello,
3 month ago i wanted to install Jas 10.4.8 on my Core2duo E6300,Gigabyte ds4 with Asus x1950pro PCIE.
But i have seen, that x1950pro not supported....

and now you say it works?

Wich version of mac can i install? what is better for me? have somebody mac on Asus x1950pro pcie?

You can establish MacOSX any version from 10.4.4!!! Yes works without problems, you see pictures are a truth! Try!

To all thanks for responses!

Worked a treat for my Saphire X1950Pro 512Mb... Thanks Allot!! I did have to remove the nativit.kext before QE/QI worked and set my res in com.apple.boot.plist. Also this is over the DVI Port... Now only to get my second monitor working and I will be in hog heaven!! THANKS!!!!!!!

yup that's all I need now, my second output to work....

Thanks! It working for me!
Great!

I will try this as soon as i get home from work.

Thanks a lot. I will keep you posted

This method worked for me with no ATI Displays installed. I had a hell of a time getting anything over DVI or VGA before installing jccools driver. I think it wasn't recognizing my LCD properly.

1. Install jccools, reboot into non CI/QE mode over DVI, change resolution.
2. Overwrite all extensions with Bronya's extensions except for ATINDRV.kext, reboot.
3. It just works, even DVI!

This is with an 7280 id Ati Radeon 1950 Pro 256mb on PCI-E, running a fresh install of Tub's 4.10 Test1.

Bronya you are a star for getting this working. I've held back on running OSX on my system because of the poor video performance playing videos and such at 1680x1050. I can finally start using OSX every day.

anyone with a x1950pro 512mb fully working?

Thanks in advance...

Thx so much, Bronya.
My display works fine.
i just follow krell 's idea.
Mine display card is HCL 1950Pro 512MB AGP with Dual DVI.
no need the VGA adapter.

if this work you are god i will test it now

wohoooooo it works gecube x1950 pro 512MB GDDR3

I cannot wait to try this. I have a Saphire AGP 512mb x1950pro with dual DVI. Before I install though, I need to know if dual monitors is working, as I have them working now under a different video card. Also, it would be great if someone that has this working could write up a step by step guide on how to get this working for newbies, and for people like me who would much rather follow directions than tinker for hours to get it working.



Thanks a lot.

Anybody experiencing mouse tearing after installing the kexts? Any fix?