Hi master,
I have tried it but probably I'm doing something wrong.
I deleted natid.kext and atidrv.kext then added ATY_Alopias.kext and repair permissions.
Please apologize my stupid questoin and could you tell me which driver should I use actually.

THX

@Bluejacky:
Try installing without the ATITVOUT.

This is an SOS to Bronya. I had a perfectly working system with Uphuck 1.4i R2.

Then in upgrade quest I deleted that Uphuck installation and tried to install XXX_10.4.10. On XXX-10.4.10 I couldn't get QE & CI working with your new driver and couldn't even log in, was getting stuck on the blue screen after boot and so reinstalled Uphuck after re-formatting my Mac partition.

Now with your installer QE, CI or rotation is not working at all. On this same system just 2 days ago I had your driver install and work perfectly. Even your original driver one previously posted on page 1 was woking with QE and CI.

I am at an odds to debug this, I am just surprised what could go worng with a clean installation with nothing installed, I even selected the same options on the Uphuck installer that I did last time just to keep the system identical. I just cannot think of any variable that can affect this.

The only thing is last time I installed your original driver, had it working and then ran your new installer. Also one more thing I have noticedin the boot screen is device ID is coming twice, first as 0x72A0 and then as 0X7280 ( I think previously both time ti was coming 0x7290) In system profiler its shown as 7280 though. Am running out of ideas to debug this. Any thing you can think of that could have made the second install fail? Anything I can do and check?

Yeah I have the same problem.

raulb "( I think previously both time ti was coming 0x7290)" <--
You should disconnected computer ! And true computer ...

ATINDRV.kext

To all, i will put ATINDRV.kext for 10.4.10...

Hi Bronya,
I have tried it but probably I'm doing something wrong.
I deleted natid.kext and atidrv.kext then added ATY_Alopias.kext and repair permissions.
Please apologize my stupid questoin and could you tell me which driver should I use actually.

THX

Yep ...
ATY_Alopias.kext in folder /system/library/extensions/ ...
Reboot ... Try ...

precisely, I have added ATY_Alopias.kext (with new Info.plist). Probably I shouldn't delete original rls drivers...

Nope !

You download http://forum.insanelymac.com/index.php?act...st&id=14973 and install in folder /system/library/extensions/ ...

Fine Thx - I finish my work. I'll try it...

Ooops, that 7290 should be 7280! Ok, there is something weird happening.

I uninstalled the new driver, then rebooted and installed your original driver (posted just before you updated the page 1 on this thread). Then checked if I was getting CI and QE with that as I was the last time. I was.

I rebooted again and then installed your new driver. This time it was working perfectly as before. I do the permissions, kext cache and disk utility thing every time I install or uninstall. Confused.

Anyway I then installed PascalW 10.4.10 update and everything is working perfectly. Quite wierd but I am relieved I have got it working again. The verbose mode boot screen is still showing x72A0 and x07280 but thats not affecting the login or performance.

Thanks Bronya.

x1950gt installer

hi scrizz
thx for you new installer
i see in your sign you upgraded to 10.4.10 with koolkal
i tried to do same but my system reset just at boot
( at kernel load)
dont'know if the problem is the kernel 8.10.3 ( tried also 8.10.1)
or a video problem (the reset occur on changing video mode)
any hint?
thx

Don't use 8.10.3 , its hella buggy , couldnt start my system with it .. so re-formatted , and had to install everything from the scratch ... use 8.10.1 if u have sse3...

Thank you! Sapphire X1950GT QE/CI DVI out OK


My id72881002

plz for 1950pro (HW 7280) also (OS 10.4.10)

THX

First Off I need to say thanks!!! this rocks and works great on my 10.4.8 JaS-> 10.4.10 install. It even see's my secondary adapter just fine but through DVI the second monitor cannot be activated. Anyone get the second monitor running on a X9150PRO PCIe 512Mb?

Thanks,
Kevin

Hi Bronya,
so I have tried ATY_Alopias.kext but nothing happend
just I have bad GPU parameters.

I hope for a wonder which solve all this {censored} problems wirh ATI 1950

PRO.

ATI Radeon X1950 Series:

Chipset Model: ATI Radeon X1950 Series
Type: Display
Bus: PCIe
VRAM (Total): 256 MB -> I have 512 MB
Vendor: ATI (0x1002)
Device ID: 0x7280
Revision ID: 0x009a
Displays:
Display:
Resolution: 1024 x 768
Depth: 32-bit Color
Core Image: Not Supported
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Not Supported
Display:

THX
Carnag

No, you not correctly also did not load it correctly!
In the beginning for you should work QE/CI, and then alopias!
Then I will send soon a package...

Kevin Email , you download driver from post 1 ?

Good notice QE/CI should work? I didn't found any driver which works in XxX_OS_x86_10.4.10_Install_Disc

Oh, tomorrow the driver for 10.4.10 ...
I tired ...

Coooool, Thanks

w00t Matrox Parhelia FTW

Hi, Scrizz Thank you.

I have tried it, but get same result.

Yes. I downloaded from the First Post downloaded the 9/17/07 revision. Will try fooling around with it alittle more. Also will try hooking the second monitor up through DVI->VGA Adapter and see if that helps.

Kevin

UPDATE: TRIED DVI-VGA Adapter also still cannot activate the second monitor.

Hi Bronya,
how is it going with new drivers?

THX

Try my installer in post #362 IT's for x1950GT

Thank You Scrizz!! and Bronya!! for all your time and help. Using the Scrizz installer I was able to get QE/CI Rotation with a Sapphire x1950pro Pcix 512meg. I deleted all the ATI, Nvidia, and Intel kexts from the extensions folder (including two hidden in a folder AppleNDRVR). I ran the Scrizz installer and everything works now. After pulling my hair out for several days I am back to glueing it back in.

Asus P5B Premium Vista
2 gig memory
Intel Core2 duo e6600 2.4 ghz
OS: Jas Mac OSX 10.4.9 + koolkal 10.4.10 update, Windows XP, Windows Vista Ultimate
Darwin 8.10.1

woohoo! thanks for all the good work you guys did, I have QE and CI enabled on my Powercolor x1950 pro 256MB Extreme! DVI doesn't work, but what the heck, i can now use iMovie!

Hackintoshes rule!

used the ATI_X1950PRO_Driver.dmg file to install.

Specs:
AMD64x2 3600+
MSI K9n_neoF
1 GB Kingston Value ddr2-533
200gb maxtor PATA
HEC475W Psu

It works great now...no mouse tearing and it reads all of the 512MB. The OpenGL is still kinda bad with frame rates only 1/3 of Vista.

Good job! I installed this drivers and works very well! Got 1280x1024, full resolution for a 17" flat monitor. Got the CI/QE working perfectly. Now I can use Front Row and everything!

The only thing is with the dual monitor settings.

I got a PCI-E Sapphire X1950Pro 512MB card with 2 DVI out puts. I have 2 DVI monitors but it doesn't recognize the second one. Wondering why because on System Profiler I got 2 devices. When I disconnect and re-connect the second monitor the first monitor fades out and come back like trying to say that it recongnize a new monitor but then nothing happens...

Has someone got dual DVI with CI/QE on a PCI-E X1950Pro?

ATI Radeon X1950 Series:

Chipset Model: ATI Radeon X1950 Series
Type: Display
Bus: PCIe
VRAM (Total): 512 MB
Vendor: ATI (0x1002)
Device ID: 0x7280
Revision ID: 0x009a
ROM Revision: 11x-4e2503SA-002
Displays:
SyncMaster:
Resolution: 1280 x 1024 @ 60 Hz
Depth: 32-bit Color
Core Image: Supported
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
Display:
Status: No display connected

ATI Radeon X1950 Series Secondary:

Chipset Model: ATI Radeon X1950 Series Secondary
Type: Display
Bus: PCIe
Vendor: ATI (0x1002)
Device ID: 0x72a0
Revision ID: 0x009a
ROM Revision: 11x-4e2503SA-002
Displays:
Display:
Display:

Have to change for my msi x1950 product id to 7244 and now

my system works.

dual screen 2 x 30" dell with 2 x 2560 x 1600 pixel!!!!!!! YEAH!!!!

os 10.4.9. with 8.9.1 kernel

Hi,I have the same result. I have also 30" lcd (samsung 305T) but I can't switch to 2560x1600 p resolution and dual lcd support is just a dream.ATI Radeon X1950 Series:Chipset Model: ATI Radeon X1950 SeriesType: DisplayBus: PCIeVRAM (Total): 512 MBVendor: ATI (0x1002)Device ID: 0x7280Revision ID: 0x009aROM Revision: 11x-4e2503SA-002Displays:SyncMaster:Resolution: 1280 x 1024 @ 60 HzDepth: 32-bit ColorCore Image: SupportedMain Display: YesMirror: OffOnline: YesQuartz Extreme: SupportedRotation: SupportedDisplay:Status: No display connectedATI Radeon X1950 Series Secondary:Chipset Model: ATI Radeon X1950 Series SecondaryType: DisplayBus: PCIeVendor: ATI (0x1002)Device ID: 0x72a0Revision ID: 0x009aROM Revision: 11x-4e2503SA-002Displays:Display:Display: C.Have a look.

@carnar:
you need to use the x1950pro installer

Hi,
I have used this installer - but I dosn't work.

New driver 17.09.2007 !!!
DEV_ID_7280 --> http://rapidshare.com/files/56461084/Ati_x...GT_Pro.mpkg.zip

I have this MAC OS rsl uphuck 10.4.9 Install DVD v1.4i R3

might be b/c it's 512

Could anybody fix it?

I tried both
http://rapidshare.com/files/56461084/Ati_x...GT_Pro.mpkg.zip
http://rapidshare.com/files/58005717/x1950...taller.mpkg.zip

QE/CI and Rotation Supported but no dual configurations.

I got a ATI Radeon X1950 Series Secondary, Device ID:0x72a0 but it doesn't recognize my display.

How people can get that ATI display manager?

Could someone be kind enough to post the essential step by steps to get a machine running from scratch with an ATI x1950 PRO.

I am a little confused, when I first install will I even get video on my screen? How are you able to add in the new drivers if the video doesn't work to begin with?

UPDATE2: It says Qe/CI is working but not getting any video out of DVD player/Screen Saver. Still researching.

UPDATED : I just got QE/CI working with the XxX_OS_x86_10.4.10_Install_Disc release

Here is what I did

1) Remove all the old stuff (ATI*,Natit.kest,NV*,Geforce*, you get the idea)
2) Install Jccool's New release of for the 1950XT for 10.4.10 - Do Not reboot (You can but will not be working yet)
3) With Pacifist Install from 17th release for ATI_x1950GT_Pro.mpkg all the files EXCEPT ATINDRV.kext

4)Before rebooting run (I know it is overkill but I like being safe)

sudo -s
#Build
echo ------------Set Permissions After Extenions Change------------------
sudo chown -R root:wheel /System/Library/Extensions/
sudo chmod -R 755 /System/Library/Extensions/
sudo touch /System/Library/Extensions
sudo rm -R /System/Library/Extensions.kextcache
sudo rm -R /System/Library/Extensions.mkext
sudo rm -R /System/Library/Caches/com.apple.kernelcaches
sudo kextcache -k -z /System/Library/Extensions
echo -----------Running DiskUtil-----
sudo diskutil repairPermissions /


5) Reboot and be happy. Still do not have Dual Monitor Support but I like being back at functioning.
NOTE: It still only recognizes 256 MB of my 512MB PCIE 1950Pro but that will be for another day of fiddling.

Now If I can just stop playing with the new releases and stick to one.

ahoi together,

i was spending a lot of time in reading this great thread.... up and down.
for me it feels really sure to risk in spending money into a new graphic card for my rig.
but the question is which one?

i would like to buy a " 512MB Sapphire Radeon RX1950GT T2xD PCIe LiRe ".....
but will it it run for 1680x1050 wit qe & ci support seperately on 2 dvi ports ( no vga adapters ) for my 2 screens ?
and what about major appz like motion3 or maya 2008? will they work with it without any probs?

what would you say?
i really don´t know right now !!
( maybe spent too much time with this thread )

greetz.... knobsi

Hi All, I just ran Cinebench 10 GL benchmark on the new driver posted by Bronya and on my Windows XP system. The card is Asus EAX 1950PRO 256MB PCI-E.

XPSP2: 4600
OSX Bronya: 3442


Is there anything that can be done to reduce the gap between the 2 systems.

Edit: Also used the cross-platform Open GL benchmarking and info tool GLViewer 2.31 from realtech-vr.com to benchmark in both XP and OSX. Here are the results:

800X600X32@60HZ

Test
1.1 Texturing XP:3510 OSX: 2567
1.2 Locked Array XP: 3420 OSX: 2506
1.3 Multitexture XP: 3315 OSX: 2474
1.4 Vertex Programs XP: 3066 OSX: 2363
1.5 Vertex Objects XP: 3081 OSX: 2368
2.0 Shading Language XP: 2907 OSX: 2245
2.1 Pixel Buffer Object Not Tested/Supported

Now strangely for the same tests with Multisample=4, Fog=ON and Anisotrophy=16 the results change to OSXs favour dramtically:

Test
1.1 Texturing XP: 866 OSX: 2083
1.2 Locked Array XP: 820 OSX: 2036
1.3 Multitexture XP: 809 OSX: 1987
1.4 Vertex Programs XP: 783 OSX: 1918
1.5 Vertex Objects XP: 766 OSX: 1920
2.0 Shading Language XP: 370 OSX: 1837
2.1 Pixel Buffer Object Not Tested/Supported

Can anyone explain this? Weird.

Can anyone help me get my x1950pro AGP to work? I have it connected to a dell 30" monitor so i definatly need to get up to 2560x1600 for it to look right. Ive tried installing the drivers from jjcool and when i get to the part right past the grey apple screen the monitor goes black and i cant get it back so i have to reload the os. I tried bronya drivers too and the same thing happens. I am using the JAS 10.4.8 build. Thanks for any help!

did you notice any change in the quality of render (fog, anti-alias) during osx test?
there were to little impact with fog and antialias on.
that is strange.

Nikeita, I actually didn't look out too carefully for that. Will do another pass and see.

has anyone had any luck running a x1950Pro? i can get full resolution using jccools method, but i'm without QE/CI.

Hi Bronya, I want to know that for the driver on Post #1, are they for 10.4.9 or only work on 10.4.10? Because I see you have posted driver for 10.4.10 on http://forum.insanelymac.com/index.php?sho...mp;#entry434746 already but Post #1 hasn't specified. I am using uphuck v1.3 and it comes with 10.4.9. Do I need to update to 10.4.10 before using the driver on Post #1? (because I got error to boot in the OSX)

My card is a PCI-E 256M 1950GT with 2 DVI output The result I got are:
1) if with ATI_7288.zip, ATINDRV and Natit, OSX recognizes it as 1950GT and support full resolution 1440x900 and rotation, but no QE/CI. (In the first display, it will said 'Status: No Display Connected'. at the bottom)
2) if I remove Natit, the card was not recognized at all. 1024x768 without QE/CI/rotation. No kernel panic or blue screen

So I guess Natit from Scrz is working correctly. But how come I can't get ATI driver working as fellows in here? What did I missed? (I have the ATINDRV from uphuck v1.3 but replaced the ATY_Alopias by Bronya. Is the ATY_Alopias the key component to get QE/CI works through DVI? If the system can't even recognize the card model, which part is most likely doing work?

Also, where should I establish ATY_Alopias.kext.zip?
a) /system/library/extensions/atindrv.kext/contents/plugins/ (Post #1)
/system/library/extensions/ (Post #357)

Thanks a lot!

Hi all !
Problems "blue screen" <- the problem opengl.framework and wrong version driver

Post 1 updated !
Here driver for 10.4.10 !!!

e-ghost, yep aty_alopias.kext in /system/.../atindrv.kext/contents/plugins/

Enjoy .

That Worked a treat on my XxX 10.4.10 install. But there was no Natit.kext and it saw the card as "generic VGA". I then installed just the Natit.kext from your 10.4.9 and my 512 MB PCIE card was detected as a 256 1950Pro but I now have resolution change (All While Q/C working). The only thing not working is mirroring and extended displays!!!

Thanks!

You are the best! The new Version works with my Saphire x1950 Pro! Love you so much
Gafuliz