Hi everyone and thank you for your efforts,
Does someone have a better solution than modifying azalia.kext and getting only 2 channels out?
I've read all the 88 pages of Taruga's thread and even the all this one, but nothing is working for me... I can see in signatures that some of you found a better solution, but i could'nt find it myself.
Anyone can help?
Full Version: ALC88x 10.4.8 Kext
Hi! I have the same problem as Alexandros7 and seriously cannot figure out what to do.
I have Gigabyte 965P-DS4 (Rev. 3.3) and ALC888. I used the package from here and installed the 6Ch. The Mic works great, but the problem lies with the speakers.
Only 2 speakers are active at any given time. I must select the two from Audio Midi Setup panel.
1. Front two
2. Rear two
3. Center and Subwoofer
Creating an Aggregate device didn't work, as I have sound from just two of the speakers again. I am at my wits end here.. any help would be greatly appreciated.
PS: The MP3s on iTunes work with just two speakers (but that I can understand since there is no speaker-fill option in Mac OS as far as I know.
I have Gigabyte 965P-DS4 (Rev. 3.3) and ALC888. I used the package from here and installed the 6Ch. The Mic works great, but the problem lies with the speakers.
Only 2 speakers are active at any given time. I must select the two from Audio Midi Setup panel.
1. Front two
2. Rear two
3. Center and Subwoofer
Creating an Aggregate device didn't work, as I have sound from just two of the speakers again. I am at my wits end here.. any help would be greatly appreciated.
PS: The MP3s on iTunes work with just two speakers (but that I can understand since there is no speaker-fill option in Mac OS as far as I know.
I have a Asus P5L-VM1394 and I finally got sound working with this, but I have no audio input. How can I get it to work?
I've just upgraded my Gigabyte DS3(v1.0) to 10.4.9 and, happy to report that 5.1 channel output still works! 
I had some trouble upgrading to .9 (blue background with mouse cursor only; couldn't go beyond this point)
so I had to upgrade to .9 without 8.9.1 kernel first, and then,
replaced the 8.8.1 kernel and 10.4.8 system.kext with the 8.9.1 kernel and 10.4.9 system.kext.
I don't know why this works but, surely it worked out for me and gave me the complete 10.4.9 system including 8.9.1 kernel.
I had some trouble upgrading to .9 (blue background with mouse cursor only; couldn't go beyond this point)
so I had to upgrade to .9 without 8.9.1 kernel first, and then,
replaced the 8.8.1 kernel and 10.4.8 system.kext with the 8.9.1 kernel and 10.4.9 system.kext.
I don't know why this works but, surely it worked out for me and gave me the complete 10.4.9 system including 8.9.1 kernel.
Hi! Fiddled around some, and GLAD to report 5.1 baybee! Sounds wonderful indeed! Thanks all y'all!
I´m having problems with my ACL883. My mobo is an Intel D945GR and when I install Skippy's ALC883 Audio Package I don't have any sound.
I have tested 3 ports, 3 ports + digital, 6 ports and 6 ports + digital and none of them work for me.
But the strangest thing is that when I install Azalia Audio package it works but only with two ports.
What can I do to make it work with 3 ports and a mic input?
I have tested 3 ports, 3 ports + digital, 6 ports and 6 ports + digital and none of them work for me.
But the strangest thing is that when I install Azalia Audio package it works but only with two ports.
What can I do to make it work with 3 ports and a mic input?
hi i have a conexant sound card for my notebook Ved ID: 14F1 Dev ID: 5045. i got the sound for my speaker thank to his azaliaaudio.pkg but i can't get sound for my headphone or line in.
anyone got any idea how to get it to work cuz i try everything even the AppleHDA patch.
thank
anyone got any idea how to get it to work cuz i try everything even the AppleHDA patch.
thank
Gigabyte 956P-DS3P, ALC888. Success using the "3 Ports + Digital" option.
Gives me fully functional digital output as well as stereo output. And detected stereo, digital and microphone inputs. (Not tested yet)
6-channels gives me 4 outputs and mic & line inputs but I lose digital output (none of the line-outs produces sound from digital).
6-channels + digital gives me nothing.
Gives me fully functional digital output as well as stereo output. And detected stereo, digital and microphone inputs. (Not tested yet)
6-channels gives me 4 outputs and mic & line inputs but I lose digital output (none of the line-outs produces sound from digital).
6-channels + digital gives me nothing.
for me, on gigabyte GA-965P-DS3 Rev. 1.3, the ALC883Audio.mpkg with 3 Ports + Digital install option gave me working analog stereo output, working analog mic/line input, and detected digitial in and out which i have not tested.
this motherboard does in fact have 6 audio output ports + digital, but that install option gave me no audio at all.
as with the post above, the 6-channel option gave me 4 line outs.
this was installed under 10.4.9
this motherboard does in fact have 6 audio output ports + digital, but that install option gave me no audio at all.
as with the post above, the 6-channel option gave me 4 line outs.
this was installed under 10.4.9
ALC883 on ICH9 not working 
help help
(asus p5k ich9 intel p35)
help help(asus p5k ich9 intel p35)
I just got my PC working with those drivers... i have a Gigabyte 945GZM mobo, 2.13 Intel Core 2 Duo, 2GB DDR2, 160GB SATA, Realtek ALC883 Sound, Realtek RTL8110SC Built-in NIC
thanks a lot SkippyRetard for this informative and really nice thread... not to forget the Drivers of course...
thanks a lot SkippyRetard for this informative and really nice thread... not to forget the Drivers of course...
Any success on azalia 889?. Thanks in advance
is anyone getting headphone out/mic on the hp dv6000 (Conexant HD audio) using AppleAzalia.kext?
i'm using an ICH7 mobo with ALC888. i know it's still not supported yet but i notice something that might point out my problem to the experienced eyes. after installed skippy's ALC888 driver (6 channel), now i have input and output and able to slide the volume. however, in Midi Controller screen, i notice that the "M" bar (suspect it is Master Volume) is disabled. so is that why no matter how i slide the volume i still don't get any sound? is there anyway to fix this?
edit: i've only recently upgraded from 10.4.8 to 10.4.9.
edit: i've only recently upgraded from 10.4.8 to 10.4.9.
HI. I'm using Azalia kext in an ALC850 with 5.1 speakers.
Sound is working, but, sometimes sound goes from front speakers, then from rear, then from central and subwoofer... and so on....
I't is a very random behaivor, and I don't know how to fix it.
Any clue?
Thanks
Sound is working, but, sometimes sound goes from front speakers, then from rear, then from central and subwoofer... and so on....
I't is a very random behaivor, and I don't know how to fix it.
Any clue?
Thanks
Really Strange problem :
I have a ALC883 and a GMA915 on a notebook, I use the Diablolik Driver for the video, and this driver for the audio.
Everything work, if I use an external display.
Of course I know the paperclip trick for the "blue screen" problem, and it work... but if I use it don't have sound anymore ...
Any idea ?
I have a ALC883 and a GMA915 on a notebook, I use the Diablolik Driver for the video, and this driver for the audio.
Everything work, if I use an external display.
Of course I know the paperclip trick for the "blue screen" problem, and it work... but if I use it don't have sound anymore ...
Any idea ?
Hello I am new to this forum. Looking out for the AzaliaAudio.pkg.zip file i guess its missing after the attack. Pls let me know where to find the file.
Thanks in Advance
Thanks in Advance
yep. it's down, please rapidshare it!
Hi guys. I'm brand new to running OS X on a windows PC. I have an ACER Aspire 1640 series laptop. Specific model number is 1641WLMi. I pretty much have everything working except for the sound. Like an idiot I did not write down what kind or sound driver I was using in Windows Device Manager before wiping it out. I know it has a realtek sound chip, I just dont know which one it is. It has two integrated speakers on the laptop and 3 plugs on the front. One is headphones, the other is mic, the third is either line in or line out, I cant really tell by looking at the icon next to the plug. Can anyone help me determine what set of drivers I need to load??
Thanks.
Edit:
After first installing the JaS 10.4.8 I had a volume icon in the upper right corner but no sound came from my speakers. I then tried installing the AzaliaAudio.pkg and it did nothing, still had a volume icon but no sound at all. So I then tried installing the ALC883Audio.mpkg. After rebooting the volume icon disappeared and obviously still no sound. When I go into system profiler and go to "Audio (Built-in)" it says no built in audio found.
Somebody please help
Thanks.
Edit:
After first installing the JaS 10.4.8 I had a volume icon in the upper right corner but no sound came from my speakers. I then tried installing the AzaliaAudio.pkg and it did nothing, still had a volume icon but no sound at all. So I then tried installing the ALC883Audio.mpkg. After rebooting the volume icon disappeared and obviously still no sound. When I go into system profiler and go to "Audio (Built-in)" it says no built in audio found.
Somebody please help
my Sound are working thanks skippyretard for the pkg my nforce 4 sound is alive 
... (my english is bad 
)
... (my english is bad )
how do i load these?
Just a quick thanks !!!
have a GA-945p-s3 mobo and I now have sound!!!!
onboard lan next .. then i will be perfectly happy!
Appreciate all of your hard work!
have a GA-945p-s3 mobo and I now have sound!!!!
onboard lan next .. then i will be perfectly happy!
Appreciate all of your hard work!
I tried every way I can to get my sound working (alc880 ich6-m) and I do get volume control but no sound.
This goes for the Apple HDA driver as for the Azalia driver.
What I noticed is that in the audio MIDI setup the Master volume is greyed out.
I can slide the channels but no master volume.
Seems logical to me the if master is not working the rest isn't to.
This is true for both drivers.
Maybe this is usefull info ( hope so!! )
This goes for the Apple HDA driver as for the Azalia driver.
What I noticed is that in the audio MIDI setup the Master volume is greyed out.
I can slide the channels but no master volume.
Seems logical to me the if master is not working the rest isn't to.
This is true for both drivers.
Maybe this is usefull info ( hope so!! )
Thanks skippy, now my Conexant HD is working, I havent tested the headphone jacks,
is there a way to get the input working?, I am using Jas 10.4.8
this card is found on a HP DV1688us
HDAUDIO\FUNC_01&VEN_14F1&DEV_5047&SUBSYS_103C30A0&REV_1000\4&2DDC00D9&0&0001
is good to have sound =)
is there a way to get the input working?, I am using Jas 10.4.8
this card is found on a HP DV1688us
HDAUDIO\FUNC_01&VEN_14F1&DEV_5047&SUBSYS_103C30A0&REV_1000\4&2DDC00D9&0&0001
is good to have sound =)
Has no one tried the ALC889 yet? this is when having a new mb sucks
Hi all,
I'm using a MSI 945GM3 board which uses acl883, so it normally should work, but the only solution to get audio out is using azalia.kexts plist modified and i only get 2 channels out with this "hack". Did someone found a way to get full support? Can at least someone that has the same board show me that i'm not stupid and say he has the same issues... by the way i'm using jas 10.4.8.
I'm using a MSI 945GM3 board which uses acl883, so it normally should work, but the only solution to get audio out is using azalia.kexts plist modified and i only get 2 channels out with this "hack". Did someone found a way to get full support? Can at least someone that has the same board show me that i'm not stupid and say he has the same issues...
by the way i'm using jas 10.4.8.
skippyretard, that was fantastic. I have OS X on a Foxconn P9657AA-8KS2H and I had problems using the generic Azalia patcher, where it'd skip and stutter all over the place. For this board, if you install using the six-port, no digital option, you get the full 5.1 setup and all my stuttering problems (a big issue in Garage Band, for example) are totally gone. I'm very happy with this build (Pentium D 805, the Foxconn board, 2GB of DDR2-800, GeForce 7600 GS, 160GB SATA drive, modified Marvell Yukon kext for the 8056 onboard LAN, SATA DVD-RW, JaS 10.4.8 with semthex 8.8.1 kernel) and your driver is a huge part of that (because I wasn't happy with it unless I used USB headphones, which I was doing until I found this thread earlier today). Thank you so much for putting it all together, and thanks to all the devs who have worked tirelessly on getting so much hardware working on OSX86. This box is for OS X only and it's fantastic, faster in most ways than my Intel-based mini that died in a lightning storm.
QUOTE (failurbydesign @ Jun 28 2007, 10:52 PM) 
how do i load these?
this is an autoinstalable archive u only do a click on it, and click next... () ... wait a moment.... restart and if the files works on ur sound card u should listen sound and u see a speaker draw in the clock area....=)
tnx this work also for me 
i ve an alc888 integrated in asrock conroexfire mb
i ve used first drive in this post AzaliaAudio.pkg.zip
and it work good
(i ve tried also alc888audio driver but seems dont work for me)
many tnx skippy good work
i ve an alc888 integrated in asrock conroexfire mb
i ve used first drive in this post AzaliaAudio.pkg.zip
and it work good
(i ve tried also alc888audio driver but seems dont work for me)
many tnx skippy good work
Do you think the AzaliaAudio kext for only 2-channel would work with the 889?
murcielago585, you should try, it seems that only a few people have this soundcard. You maybe will have to edit the plists.
skippyretard, you said in a post that alc883 would'nt work on your msi 945gm3-f board, is it still the case? Didn't you find a workaround?
skippyretard, you said in a post that alc883 would'nt work on your msi 945gm3-f board, is it still the case? Didn't you find a workaround?
I have Gigabyte GA-945GZM-S2 with ALC883 sound card.
The ALC883Audio.mpkg let me play music, but I hear sound only from one stereo speaker.
Any idea how to solve it?
I have Kernel Version 8.9.1 (Jas OS X 10.4.9 SSE3)
Morphy
The ALC883Audio.mpkg let me play music, but I hear sound only from one stereo speaker.
Any idea how to solve it?
I have Kernel Version 8.9.1 (Jas OS X 10.4.9 SSE3)
Morphy
Any luck with ALC888 and 10.4.10?
Yes- it is working perfect
Works ok in my ALC888, motherboard Gigabyte GA 965P-DS4 v2.0.
Thanks!
Thanks!
YOU ROCK! thanks!!!
I have a 645GZM-S2 rev3 gigabyte motherboard
883 worked perfect sounds good
hugggeee thank you!!! i got scared.
this is 100% flawless mobo for under 50$
lol
I built a bitchen osx box loaded for under 200
1gb ram ddr2, 3.3ghz, 320gb barracuda sata, 645gzm-s2 mobo, 42wat psu, cheap case.
WOOT
I have a 645GZM-S2 rev3 gigabyte motherboard
883 worked perfect sounds good
hugggeee thank you!!! i got scared.
this is 100% flawless mobo for under 50$
lol
I built a bitchen osx box loaded for under 200
1gb ram ddr2, 3.3ghz, 320gb barracuda sata, 645gzm-s2 mobo, 42wat psu, cheap case.
WOOT
Got audio working in 6 channels on Asus P3-PH4C using ALC883Audio.mpkg. No hiccups, just worked.
Thanks to skippy.
Thanks to skippy.
Thank you
I got ALC883Audio.mpkg working on my MSI K9GVM-V motherboard and it all seems to work well. Thanks for the hard work! However...
The major problem I'm having is that when I install the package it kills my MSI PC60G Wireless card for some unknown reason. It was working fine out of the box when I installed JaS 10.4.8.
It looks like I might be alone in this problem because I just read through this whole thread and found nothing similiar. Any suggestions? Right now if just looks like my decision is either to have sound or have an internet connection.
Thanks!
The major problem I'm having is that when I install the package it kills my MSI PC60G Wireless card for some unknown reason. It was working fine out of the box when I installed JaS 10.4.8.
It looks like I might be alone in this problem because I just read through this whole thread and found nothing similiar. Any suggestions? Right now if just looks like my decision is either to have sound or have an internet connection.
Thanks!
i have a gigabyte ds3 with alc 888 but it function only in 2.0.. adding aggregate device: only 2 output (the 2 frontal). I have uphuck 1.4i, what can I do? thanks
ok i have a P4 2.8Ghz (SSE, SSE2) 512Kb Cache, 1GB RAM, AC97 ALC658 Sound Card on a Gigabyte GA-8IG100 Motherboard. Now i want to know if there are drivers for my type of sound card, right now the default driver that i have got installed with Mac OS 10.4.8 Jas AMD-Intel-SSE2-SSE3 PPF1&PPF2 work just fine but here is the problem. When i use Audio Units or VST the processor usage goes off the charts and the audio keeps breaking up and i cant hear anything. I was thinking the problem is with the audio drivers. Does anyone know of a solution ?
Hi, first build ever here, been in PCs for years.
I have:
Gigabyte GA-965GM-S2
2gb DDR667
250Gb SATA - I still only see 128Gb
10.4.8 + KERNEL 8.8.1 added
No errors at install, none since.
Managed to run terminal and get Marvel Yukon Vendor and Device updated, worked instantly.
Problem:
ALC883, not working, got the ALC883audio.mpkg
Installed it every which way.
ran terminal to add <string>pci8086,2445</string> to alcinject.kext
got the dev & ven numbers from XP running in parallels
Really not sure about what to do with the applehda.kext
I get absolutely nothing - no input or output devices
Also tried the azaliaaudio, got the sound icon, but no sound.
Everything else took me about 2 hours, the sound - I've been at it for 8 hours, I need a kick in the right direction, from all I read, it should be working, what am I missing here? Thanks for the help... much appreciated
I have:
Gigabyte GA-965GM-S2
2gb DDR667
250Gb SATA - I still only see 128Gb
10.4.8 + KERNEL 8.8.1 added
No errors at install, none since.
Managed to run terminal and get Marvel Yukon Vendor and Device updated, worked instantly.
Problem:
ALC883, not working, got the ALC883audio.mpkg
Installed it every which way.
ran terminal to add <string>pci8086,2445</string> to alcinject.kext
got the dev & ven numbers from XP running in parallels
Really not sure about what to do with the applehda.kext
I get absolutely nothing - no input or output devices
Also tried the azaliaaudio, got the sound icon, but no sound.
Everything else took me about 2 hours, the sound - I've been at it for 8 hours, I need a kick in the right direction, from all I read, it should be working, what am I missing here? Thanks for the help... much appreciated
does anyone knows how to solve this problem in a ALC862 ICH7??? i got the output has Hd Audio Output and the icon in the mune bar, but still dont have any sound, either i used the patch from tarugas, but i doesn't work for me!! does not embed any dump code?? can you give me any clue please?. thanx
nice........working 100% on 10.4.8 on gB 965 pds3...whoohaaaaa
QUOTE (skippyretard @ Dec 22 2006, 04:28 AM)
OK, I have started a new thread so I can keep all my drivers together in one easy to find post. For a little background info on this project refer to THIS thread. I would also like to mention that this would not be possible without Semthex, Taruga, TheMax32000, Rene204 and the countless testers that have helped develop these kext!
Skippy
AzaliaAudio.pkg should give 2ch output on most High Def Audio chipsets (updated v1.1)
Click to view attachment
ALC883Audio.pkg includes kext's for ALC883 support on mobo's with 3ports, 3ports w/digital, 6ports and 6ports w/digital
Click to view attachment
ALC888Audio.pkg includes kext's for ALC888 support on mobo's with 3ports, 3ports w/digital, 6ports and 6ports w/digital
Click to view attachment
YOU MUST USE 8.8.1 KERNEL WITH ALC883AUDIO.PKG AND ALC888AUDIO.PKG
If you have 3 outputs working you can setup 5.1 using Audio MIDI Setup found in the /Applications/Utilities/ folder. On the menu bar select "Audio>Open Aggregate Device Editor". Click on the "+" square and it will add a new aggregate device. Now select "Use" next to each output you want to add(usually the first 3) and click "done". Change Default Output to the "Aggregate Device". Now select "Aggregate Device" in the Properties For: box and click on "Configure Speakers". Click "Multichannel" and select "5.1 Surround". When your done configuring your speakers the way you want them, make sure you click "Apply" before "Done". You should now have 5.1 surround sound working.
Skippy
AzaliaAudio.pkg should give 2ch output on most High Def Audio chipsets (updated v1.1)
Click to view attachment
ALC883Audio.pkg includes kext's for ALC883 support on mobo's with 3ports, 3ports w/digital, 6ports and 6ports w/digital
Click to view attachment
ALC888Audio.pkg includes kext's for ALC888 support on mobo's with 3ports, 3ports w/digital, 6ports and 6ports w/digital
Click to view attachment
YOU MUST USE 8.8.1 KERNEL WITH ALC883AUDIO.PKG AND ALC888AUDIO.PKG
If you have 3 outputs working you can setup 5.1 using Audio MIDI Setup found in the /Applications/Utilities/ folder. On the menu bar select "Audio>Open Aggregate Device Editor". Click on the "+" square and it will add a new aggregate device. Now select "Use" next to each output you want to add(usually the first 3) and click "done". Change Default Output to the "Aggregate Device". Now select "Aggregate Device" in the Properties For: box and click on "Configure Speakers". Click "Multichannel" and select "5.1 Surround". When your done configuring your speakers the way you want them, make sure you click "Apply" before "Done". You should now have 5.1 surround sound working.
Great patches work. I have a GA-965P-S3 rev 3.3 ALC888 6ch out. I Tryed your ALC888AUDIO.PKG and everything is fine but the last option of 6ch out and SPDIF Digital Out.
The option od 2ch + Digital works ok but 6ch + Digital doesn't. Could you help me? I tryed with kernel 8.8.1 and 8.9.1 actual. No luck...
Expecting you magic...
Greets from Spain
YuYu DJ
QUOTE (mismamente @ Dec 22 2006, 10:25 PM)
Hello Skippy, I have tested the alc888 package and my results, on an Asrock 775Dual-vsta (alc888) was:
installing:
6 chan+digital -> no sound (and no devices found)
6 chan -> 4 output lines found, but as independent devices: I can select only one of the output line, and have sound from front speakers. Selecting other output, I have sound from rear speakers. Selecting the third line out, sound from central speaker and subwoofer. Selecting the four line out, not sound at all.
3 chan + digital -> detected one line out (the front speakers) and digital output (not tried)
3 chan -> only one line out.
All the configurations with working sound have at least (I don't remember exactly) two input .
I hope I can have 5.1 sound.
From only 2 channels out and no input (with azalia), going to 2 channels out and mic (first alc888kext from skippy), now we have 6 channels (the 3 lines out) and input, but lines out are not working at the same time.
Skippy, you are in the good way! Thanks a lot. If you need more info, or you want me to test more pkgs, please tell me.
installing:
6 chan+digital -> no sound (and no devices found)
6 chan -> 4 output lines found, but as independent devices: I can select only one of the output line, and have sound from front speakers. Selecting other output, I have sound from rear speakers. Selecting the third line out, sound from central speaker and subwoofer. Selecting the four line out, not sound at all.
3 chan + digital -> detected one line out (the front speakers) and digital output (not tried)
3 chan -> only one line out.
All the configurations with working sound have at least (I don't remember exactly) two input .
I hope I can have 5.1 sound.
From only 2 channels out and no input (with azalia), going to 2 channels out and mic (first alc888kext from skippy), now we have 6 channels (the 3 lines out) and input, but lines out are not working at the same time.
Skippy, you are in the good way! Thanks a lot. If you need more info, or you want me to test more pkgs, please tell me.
Mismamente, "mismo" problem in a GA-965P-S3 v 3.3, no 6ch+digital devices fonund...
Still waiting to magicians...
hi!!!i'm italian boys..sorry for my english!!
i have installed your pack yet, it's all ok, but i listen in stereo!!
i do configure speaker, but when i apply, and then i enter again the setting turn in stereo!!Why??
with buttom i listen each channell, but when i save and play with itunes, i listen in stereo!!
please help meee....
my is MSI k9vgm-v alc883 with 6channel installed, not digital..
i have installed your pack yet, it's all ok, but i listen in stereo!!
i do configure speaker, but when i apply, and then i enter again the setting turn in stereo!!Why??
with buttom i listen each channell, but when i save and play with itunes, i listen in stereo!!
please help meee....
my is MSI k9vgm-v alc883 with 6channel installed, not digital..
QUOTE (chmod-uk @ Feb 25 2007, 08:44 PM)
I've just installed 10.4.6 (8.4.1) on an ASRock 775i945GZ. Everything works apart from the sound (ALC888). Just basic stereo out is all i want really. Is there any solutions for this setup that i could try. I can't update to 10.4.8 either cos then my LAN won't work, and i did try everything with that
do a search about you mobo in this forum. I've seen a patch for that mobo somewhere. but i think you sould install 10.4.8 instead of 10.4.6. Or sound won't work
Thank you skippyretard for the driver, I've got working 2-channel sound on my ASUS P5N-E SLI motherboard
Just a quick question: how can I get 6-channel analog working on this motherboard (which install option am I supposed to choose)?
Board picture: http://www.techspot.com/articles-info/43/images/Image_07.jpg
- Atif
Just a quick question: how can I get 6-channel analog working on this motherboard (which install option am I supposed to choose)?
Board picture: http://www.techspot.com/articles-info/43/images/Image_07.jpg
- Atif
Are these drivers supposed to be installed to 10.4.9 with Darwin 8.9.1 kernel? The ALC883Audio.pkg worked ok, although that I updated fro 10.4.8/8.8.1->10.4.9/8.9.1. But I've had some sound problems and I tried to reinstall the package. Since then, the only devices shown up at Sound preference pane are "Soundflower (2ch)" and "Soundflower (16ch) whatever option i select during the custom install.
Should I move to AppleHDA Solution?
Should I move to AppleHDA Solution?
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.