hello, i have just installed 10.4.8 jas 8.8.8.1 amd on my asus a8vm ve 8237 lan integrated (rtl8201 cl) and k8mt890 chipset, everything goes well except dvd playback and lan (does not work).
Processor is opteron 170 939 socket, what can i do to solve those problems:

Hey Everyone!!!! look at what i discovered!!!!Realtek Drivers from REALTELK them selves:

RTL8111B/RTL8168B/RTL8111/RTL8168/RTL8111C for 10.4 (10/100/1000 pciE) under OTHER
http://www.realtek.com.tw/downloads/downlo...GetDown=false#7


RTL8110S-32/RTL8110SB(L)/RTL8169SB(L)/RTL8169SC(L) RTL8169 (10/100/1000 pci) for 10.4 under OTHERhttp://www.realtek.com.tw/downloads/downlo...ue#5,7,8,10,987

Not sure if this one will help anyone but it is an Intel 8254x driver from smalltree. They make intel cards for Mac computers. Maybe some coder can use this as a basis for supporting other intel nics.
Click to view attachment

sum1 a driver for my Intel 82547EI thx!

Can anyone use this Linux driver to make Atheros 2 LAN work?

I went ahead and got a Hawking 10/100 PCI adapter that came with OS X drivers
but didnt mention OS X drivers on the box.

Lucky I guess it works fine in 10.5.1

I'll try to find some information about any driver in my Nvidia Nforce ethernet adapter. anyone who can help me about this?

Hallo,

need Help! I Have a MSI Board (MS 7502) with onboard Intel 80866V Lan. Have an one a soloution? With Intel 8085x an ID (0x10c08086) it won´t work!
Please help me!

Thanks!

Hi,
How can I get my Ethernet card to work if:
Operating System:KALYWAY's MAC OS X 10.5.1 for intel
Motherboard:Intel
Model:D945PLRN
Chipset:i945P/PL/G/GZ
Ethernet card:Intel Pro/100 VE

Please Help!
Thanks...

hi my lan don't work , i have a MN2-Sli E motherboard with chip Nvidia 500 , i try all solution but no one work , someone have same problems and find solution?

This link is not working...

I´ve got almost everything working on my Acer Aspire 5104Wlmi, just need Ethernet & Wifi... and it´s got Realtek RTL8139/810x(Ethernet) and Atheros AR5007EG(Wifi).

Hope somebody here knows where this link was supposed to be going...

Hi guys,

I don't know a thing about ethernet drivers ...

Please help me to complete a perfect install ... a really wanna be able to surf the web on Leopard!

My pc specs: cfr. sig!

thanks!!

I got a Gigabyte motherboard (GA-M55S-S3) with nvidia nforce 550 chipset and gigabit LAN.
Anyone help me with a driver/guide how to install? Can't get this working...
Please help.

Best regards
Kresh

Hi Dafart. Your link is a dead one . So I searched for "M5263" on this forum(in Vista it's detected as a Uli M5263 PCI Fast Ethernet) :
http://forum.insanelymac.com/index.php?s=&...st&p=405457
It works like a charm with Leopard on my Asrock 939Dual-Sata2 motherboard (ULi® M1695/ ULi® M1567).

I'm usin Mac Leopard 10.5.2 inside a VMWare Virtual Machine , my physical net adapter is Realtek RTL 8139 10/100 Ethernet , but Mac is showin , Vendor : Intel . Model : 82545EM Copper . ethernet id : 00:00:00:00:00:00 !
i can also see dat there r "AppleIntel8254XEthernet.kext" & "AppleRTL8139Ethernet.kext" both present , among others inside systm/lib/ext/ionetfam/cont/plug folder . i guess vmware emulates some "Intel" card , and probably dats why Mac is usin intel kext . or may b Mac is usin dat intel kext for rtl 8139 .
Problem : everytime Mac re-starts , a new ethernet gets added ( new port detected ) ! very very annoying !
Anyone knows any solution ?
( d = th ) . Can someone show/write a script dat can add dat "new" ethernet Automatically , so it can obtain da dhcp ip automatically & remove da old ethernet entry in/from da "Network" , after each reboot ? How an AppleScript can handle dat "new port detected" popup windo & press "enter" button there & den click on Apply & den click on close button ? at least den da net adapter starts workin . Since many of us having this problem , dat wood b very helpful , Thanx .
~ Bry8Star . May3,2K8,Sat,5:07PM,PST.

EDIT : i solved da problem , posted in new thread here http://forum.insanelymac.com/index.php?showtopic=103669

I have installed the forcedeth.kext and Mac recognises my ethernet card, but i can't connect to the internet. Not with automatic neither manual configuration. The little button turns to green and it says I have ip-adress 165.xxx.xxx.xxx (don't know the exact adress). But normally (in windows) it's always 192.168.1.10x. It says I am connected but Safri still doesn't work.
Does anyone have a solution (except buying a Apple)?

Just wanted to add my three cents worth here (inflation U know).

I couldn't get the internal Intel NIC to work on a Dell Precision Workstation 670. I added a Trendnet NIC using a Realtek 8139D chip and it worked perfectly. Running 10.5.2 (Kalyway 10.5.1 w/ Kalyway 10.5.2 Combo Updater). The driver is included in the Kalyway load, so there were no changes to be made. Now Safari has something to do!

Hi My PC config is


Name - Dell 9200 (kak XPS410)
Specification - Intel® Core™2 CPU 6320 @ 1.86GHz
Package - Socket 775 LGA
Family/Model/Stepping - 6.F.6
Core Stepping - B2
Technology - 65 nm
Core Speed- 1862.1 MHz
Multiplier x Bus speed - 7.0 x 266.0 MHz
Rated Bus speed - 1064.1 MHz
Stock frequency - 1866 MHz
Instruction sets - MMX, SSE, SSE2, SSE3, SSSE3, EM64T
L1 Data cache (per processor) - 2 x 32 KBytes, 8-way set associative, 64-byte line size
L1 Instruction cache (per processor) - 2 x 32 KBytes, 8-way set associative, 64-byte line size
L2 cache (per processor) - 4096 KBytes, 16-way set associative, 64-byte line size
Chipset & Memory - Northbridge Intel P965/G965 rev. C2 -Southbridge Intel 82801HH (ICH8DH) rev. 02
Graphic Interface - PCI-Express (NVIDA GeForce 7900GS)
PCI-E Link Width - x16
Memory Type/Size DDR2 2GB
System Name - Dell DXP061 (Dell 9200)
Mainboard Vendor/Model - Dell Inc./ 0CT017
BIOS Vendor - Dell Inc. v2.4.2 03/20/2007
Memory SPD
Module 1 - DDR2, PC2-5300 (333 MHz), 1024 MBytes, Samsung
Module 2 - DDR2, PC2-5300 (333 MHz), 1024 MBytes, Samsung
Windows Version - Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
DirectX Version - 9.0c
HardDrive 1 (SATA): Western Digital 160GB (This has the Windows XP installed on it)
HardDrive 2 (SATA): Maxtor 500GB - Partition0 400GB NTFS - Partition1 100GB (for OSx86 Leo4allv3)
Built-NIC: Integrated Intel 82566DC Gigabit Network Connection
Wirelesss Network Card: Linksys Wireless-G PCI Card

I installed kalyway 10.5.2 successfully and now the only issue I have is that niether the built-in NIC (Wireed Network) and Linksys Wireless-G PCI Card are not working. Is there a slution to get either of them working?

TIA

Thanks for the great info...

My motherboard has a Realtek Chipset but the Realtek driver's don't seem to work. I can see the Realtek logo on a chip on the motherboard and its stamped w/ '7A16751 G741B1' and it also has a 'ALC662' in the corner...

Any idea if there is an OS X driver for this version of the Realtek card?

So I'm running an EVGA 650i Ultra SLI motherboard and my OSX86 install (Kalyway 10.5.2) is working perfectly except for my onboard LAN (well, sound isn't working, but I've got a soundblaster audigy zs 2 so I'm assuming that's a lost cause)

My issue is this. I can't seem to track down what the LAN controller is on this board. The only mention I found was that it might be the Marvell 88E111-NNC1 PHY controller. Absolutely not sure if this is right, or even if it is, what the correct solution would be?

Any help would be greatly appreciated. Thanks!

How do you install this?

I use this in 10.5.1:

Hawking HWUG1A Wireless USB adapter works great.

Shows up in system profiler as follows:

802.11 bg WLAN:

Removable Media: No
Detachable Drive: Yes
BSD Name: en1
Version: 0.01
Bus Power (mA): 500
Speed: Up to 480 Mb/sec
Manufacturer: Ralink
Mac OS 9 Drivers: No
Partition Map Type: Unknown
Product ID: 0x2573
Vendor ID: 0x148f

I use in Vista Ultimate 64 bit as well as Mandriva 2008.1 X86_64 works fine also:

In Mandriva shows up as follows:

Identification
Vendor: ‎Ralink

Description: ‎802.11 bg WLAN

Media class: ‎

Connection
Bus: ‎USB

Bus PCI #: ‎1

PCI device #: ‎6

Vendor ID: ‎0x148f

Device ID: ‎0x2573

Sub vendor ID: ‎0x0000

Sub device ID: ‎0x0000

Misc
Module: ‎rt73usb

In Vista as a Ralkin 802.11 bg

Laptop is a HP Pavillion dv9207us beefed up a tad, I put in a T7600 cpu, 4 gigs and a faster hard drive.
Hardware Overview:

Model Name: Mac
Model Identifier: Mac Pro
Processor Name: Intel Core 2 Duo
Processor Speed: 2.3 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 4 GB
Bus Speed: 2.67 GHz
Boot ROM Version: Hack.int.0sh
Serial Number: XXXXXXXXXXX

Hope this helps

no_gatez_fan

Hello, I'm new to this but enjoy the concept. I have a PCChips A13G+ v3.0 motherboard with Realtek ALC600 Audio, NVidia GeForce 6100 and Broadcom AC131 LAN all built in. It has a 320GB and 2GB DDR2. I've installed Kakaway's 10.5.2 OSX and it works fine with the exception of the ethernet. I was wondering if anyone has a fix to this. Thanks.

Success!

I tried 2 Ethernet cards but after i messed with kexts i had enough.
So i went and i bought a brand new Ethernet card with OSX drivers on CD
(after i saw OSX support on the packaging):

D-Link DGE-530T

So i installed a fresh copy of KALYWAY 10.5.2 on my spare hard disk and after OSX was running OK without inserting the card into my PC i installed the OSX drivers from the CD following the instructions step by step in the "drivers/MAC OSX/" section of the CD.

Turn off PC, inserted the card, boot into OSX, System Preferences, Network and voila! my card was detected!

I just clicked OK then apply and the Ethernet on the left side bar went green, opened Safari so now i'm writing this from my Ethernet - Internet connected Hackintosh!

Better spend a few dollars than getting crazy with kexts..

ffinder.

does anyone know of a solution for nForce 520 southbridge LAN?

The links for the ViaRhine are dead including the author's website can someone help me please

Hello Any kexts or support for the 3com 3CRE62092B card..I know its really old but It would help me out alot! Thanks

I have an ethernet port, Marvell Yukon, Yukon-88E8038, and vendor and device IDs, 0x435211AB. I cannot get it working on Kalaway's Leopard 10.5.1 installation. Could someone please help me out here? I have been looking everywhere with no luck so far.

Does anyone know what kind of ethernet i have inside my Alienware please I cant open it up to find out because it will void my warranty and it's only 3 weeks old.

I got Alienware m15x

I think it's a Gigabit Ethernet but i cant find drivers for it to use with Leopard All4Leo.

This is my network car and wifi info:

Wireless NIC Intel Wireless WiFi Link 4965AGN Data link protocol Ethernet, IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, Bluetooth 2.0, Fast Ethernet, Gigabit Ethernet, IEEE 802.11n (draft) Networking standards IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, Bluetooth 2.0, IEEE 802.11n (draft)

Can you attach the realtek drivers here, because I can't connect realtek site for some reason

Use a proxy

Me 2 but everest 4.20 says it is a "Linksys LNE100TX fast Ethernet controller."

So. Look for a Lynksys LNe100Tx

worked for Hardware Overview:

Model Name: Mac
Model Identifier: G31M-S2L
Processor Name: Intel Core 2 Solo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 1
L2 Cache: 1 MB
Memory: 2 GB
Bus Speed: 800 MHz

alone cable modem connection works.


but how can i get the router to work with the mac?

http://www.planex.net/spec/router/BLW-54CW...nglish_v1.0.pdf
BLW-54CW IEEE 802.11g Wireless Broadband Router

it fails to connect to internet any advice?

Here are the two files for realtek drivers for os 10.4 or 10.5:

Click to view attachment

Click to view attachment

BRILLIANT! you are some very clever people this has got my internet working properly and solved the last major headache I had with the hackintosh!

many many thanks!

EDIT: alas - although I'm sure you are still clever people this appear to have been a cruel game my tamed leopard was playing on me, although the internet worked for twenty minuets, far longer than before - it once again decided to change it's IP address and stop working. *sigh*

I experience the same. Solution is needed...

Any word on drivers/patches for Realtek RTL8139 cards? all the links here are dead or don't help...

this seems to be one of the problem cards

I have the same problem. I've just found a broken link here: http://forum.insanelymac.com/index.php?showtopic=35380

Can anybody help with the IP getting lost after OSX resumes from sleep?

Hi all

After browsing the forums for a few days I decided to forget my integrated 82566 and instead I bought this D-Link DUB-E100 USB Ethernet adapter : http://www.dlink.com/products/?sec=0&pid=133

I plugged it into USB, started the computer (Kalyway 10.5.2), it was detected and it works just fine.

That's how I overcome the driver problem with my onboard Broadcom BCM5752 chipset. I choose instead the Apple USB to Ethernet adapter ($30) with free delivery from Online Apple Store. I am more than happy with its performance.

Here's a tip for jump-starting the Intel PRO/1000 series (both card-based and onboard; it shows as onboard Ethernet) in Leopard (works in 10.5.x) when connected to a router:

Temporarily change the setting from DHCP to DHCP with manual address, then select an unused IP address on the same subnet (I use 192.168.100.113 for this, as my router uses 192.168.100.xxx), then exit System Preferences; however, don't restart yet! Instead, go back to System Preferences, and to Network, then change the setting back to DHCP, and hit Apply. Despite everything being *greyed out* and the red light remaining on, the fields will still populate (in grey). When this happens, it means that (despite the false red light) your router is being seen and your network connection is live!

I've had this happen twice now (first with ToH 10.5.2, and just now with JaS 10.5.4) and this fix works for both (same hardware).

I'm having trouble with an nForce card connecting to the internet via a home router using DHCP. Plain old DHCP doesn't work - it says that the status of my connection cannot be determined, then self-assigns an IP Address that's completely different to the rest of the network. So, I've therefore connected the Hackintosh with DHCP and a manual IP (definitely unique on the network). System Preferences then says that I'm connected over ethernet - the router status page can see the Hackintosh is connected and reports its MAC address correctly. However, I can't ping the machine from anywhere else on the network, nor can I ping any other machine from the Hackintosh. I can't get the internet, check email, ssh or anything. My MacBook connects fine with just plain DHCP - gets a correct IP and works without any problems. Anyone got any suggestions?

nForce ethernet card
Kalyway with Forcedeth
OSX firewall turned off

Not sure what else is important, so let me know if you need any more info.

Edit: Problem solved :-)

Hi, my lan card is nVIDIA MCP67/68 - LAN Controller (PHY: Realtek RTL8211/8212) PCI

Acer Aspire 7520 with Kalyway_10.5.2_DVD_Intel_Amd

what drivers will approach for this card? Thx)

Onboard LAN Marvell 88EC031 driver anyone?
If it help I have a ASUS A8M2N-LA motherboard

Waiting for solutions of intel 82567 giagabyte. please help.

I have de exact same problem. i also put "waking up lan" off in my bios. But then my XPS M1330 would even start mac os up.
I am using leo4ever v3.

Please help.......

I also have the intel 84567 gigabit ethernet...have tried various times but I cannot get it to work.

Any help appreciated.

Intell 82566 is now working thanks to Guijin. It can be downloaded here: http://techresearchinfo.blogspot.com/

Hello.

Using VMware workstation 6.5 under vista (64 bit), I managed to get iATKOS 4.1i installed
and running on a HP Pavilion m9351.
The network was not working yet, so I installed the driver for the RealTek 8168 Ethernet device suggested
in this thread. It installed successfully, but when I go to the network in the system configuration, it
still claims the cable is not connected despite the cable being connected.
Can anyone provide some assistence on how to get the network configured properly?
I have other virtual machines (XP Pro and ubuntu) that have no difficulties with network connectivity.

Kind regards and thanks in advance for any suggestions, Niek

i have a realteck 8187b and i cant connect to wlan or sometimes find them