Hi, guys!
I have a PC with ASUS P5k/EPU motherboard. Hackintosh installs flawlessly. After installation everything is OK, but the system does not recognize my DVD-RW (IDE,LG). Are there any drivers for Marvell 88SE6102- controller, because I think that is the problem?
Thanks in advance!

The problem is IOATAFamily.kext.

I solved copying this kext from an installation of Leo4all V2.

If you are interested, when I go back home, I put a link to this modified IOATAFamily.kext.

I apologize for my bad English
Giorgio

Hello Giorgio, I just tried iDeneb 1.3 on a Asus P5K Pro and I'got the same problem. Could you attach or send me the modified kext??

Ciao Giorgio, ho appena installato la iDeneb 1.3 sulla P5K Pro di mio padre e anche io non riesco a far funzionare un hdd ATA in cui mio padre fa il backup. Potresti postare il kext??
Mi salveresti

This is the modified kext: for me works, good luck.
Giorgio



Click to view attachment

Is welcome a feedback, positive or negative, thanks

Thanks

I'll try it in the next week end

Sweet! That fixed my IDE burner on my Asus P5K Pro as well.

And also worked on my Asus P5Q Deluxe: both IDE HD and burner now are detected
under Mac Os X... Thanks!

I'm very happy, that was the only thing keeping me from a 100% working Hackitosh

I have an issue, when I try to burn a cd or DVD Leo will lock up randomly, not every time but if it is a large file that takes awhile to burn it will lock up more often then not, and I will have to reboot to get any functionality back. Any suggestions?

I think that it is a RAM configuration problem in BIOS.

Like how do you mean?

Try to burn some DVD with only 2 GB of memory on board.

thx, worked well on my GA X48T-DQ6 motherboard

p5k /se works well also
i love u

works for me, too, on p5k-pro with Marvell 88SE6102 PATA controller.
thanks Giorgio!

I still have a question: can I use my 80gb ide maxtor as time machine backup? or will it not work because this kext is not on the original dvd?

Domanda: posso usare il mio maxtor ide da 80 gb come backup di time machine, oppure non funzionerà quando mi serve, perchè sul dvd originale non c'è questo kext?

hi all,
Please could someone tell me where i must put this .kext?

thanks in adavnce.

download and use kext helper, it knows!

You mjust made my day a "bright day" thanks a lot ago and especially Giorgio-multi for this .kext now i have an almost complete ideneb perfect distro

You rulz!

Thank you very much for this !! i've searched why it wasn't working and i've found this post and now it's working very well on My hp 9760EF (i don't know the chipset's name) My dvd drive is a Toshiba HD.
Thanks again !!!

Yes. I use a 120gb IDE Hard Disk for Time Machine and works fine.

(basta che l'HD sia riconosciuto da Leo per usarlo con Time Machine)

Giorgio

thanks , Giorgio, but I mean, booting by retail dvd, will it work?

I have modified this kext for 10.5.5 release and specifically for iDeneb 1.3; I have not tried with 10.5.6; might work, but it is a risk.

Giorgio

Can you please tell me how to modified this file so it work with 10.5.6 ,it`s just that i have a board DP965LT that appear to have a Marvell controler for IDE and i can`t make it work for my DVD burner ,the id of the Marvel controler is 0x610111ab i think ,tried every think so far and nothing work ,im using iATKOS 5i updated to 10.5.6 working in AHCI mode.

Thank you

Man i love you ,i install again the kext and reboot with -v -f and it work now incredible 4 days trying every think and finally work
Now i just need to insert this on the install DVD so i can install from my IDE dvd if problems arise one day .

I have applied the KEXT, and it works fine on my P5K Pro, and my IDE Drives mount now,
but in System profiler and Disk utility, the drives show up as SATA, and the ATA Says no devices
attached. This has not been a problem, I'm just curious why.

Thanks

Chuck E.

Hey, guys, I have the same problem, only different hardware config. I have installed Leopard 10.5.6 from iPC (PCwizz), it installed with no problems, but now my Optiarc DVD drive is not recognized, but it worked for the installation with no problems, everything else works correctly. Do I have to get SATA DVD drive, or is there a fix for this, I have installed Jmicron IDE drivers, but they are not helping, is there another quick fix?
The drive worked fine with Kallyway 10.5.2

I use same main board , and I updated lastest bios (1303). I try to install ATA driver for my Asus DVD-RW ATA but not complete. Anybody help me????

I have installed the modified kext, and it worked just fine on my 10.5.6 boot 123 install, the only thing
odd is I noticed that the drive shows up in system profiler as a SATA drive, and nothing shows up under ATA. I only used it to copy info from my old drives from my previous G4 powermac, to my new Hackintosh box, and that was almost two months ago.

I have recently upgraded to 10.5.7, and have not had a chance to test, as I do not currently have a ATA/IDE drive installed.


Thanks Giorgio

Chuck E.

YES!

Worked for me aswell! 10.5.6 in ACHI MODE
No i can finally dualboot to windows if needed. Sata optical drives woulde not work in windows in achi mode even with slipstreamed drivers. Would boot without optical but with it no dice.

2days ago got Sleep working and Now this! '

EVERYTHING WORKS - A TRUE HAC PRO!

thanks for this!

Did not work for me on my asus P5n-E SLI, my DVD Driver is still not showing, either I'm using Kext helper wrong or it's not compatible with my DVD.

I have problem in my dvd. I installed 10.5.6 & 10.6 mac os retail. Install only an external HDD, else "steel waiting for root device". After install dvd do not works(((
i tried ideneb, xXx.
In about Computer, section sata error((
When i learned device error disappears.
Sory my English)))
bios not have achi, ide mode.

hp Pavilion dv5 1075er - MAC OS 10.6.1
Intel Core 2 Duo P8600 (2,4)
Intel PM45 + ICH9-M
NVIDIA GeForce 9600M GT, 512
IDT 92HD71B7

is this working SL 64 bit?