Hi guys,

this is the version Lite of iDeneb v1.6 10.5.8.
Essentially the big difference with Complete version, is the absence most of Audio and ATI Drivers, and the different structure of the dvd.
In this version there are only AzaliaAudio and VoodooHDA like drivers audio, and ATY_init by Netkas for ATI Drivers.
Then, there are no more default patches, but only pre-select package.
This version gives more freedom to the users on the choice of drivers. You can see on screeshot of the OSInstall.
In this version there are only six additional languanges: Japanese, German, French, Spanish, Italian, Russian.

Before install remember:
- Check the iso md5;
- Read carefuly the "readme.rtf" file and during the installation read the package descriptions.

For more info, you can visit the official project site.



Click to view attachment

zank you

Very interesting, which Audio Driver, AzaliaAudio or VoodooHDA, would you recommend for ALC883?

Thank You

Just get the normal ALC883 driver post-install. Assuming it exists. There's more than one way to install the options iDeneb includes.

Try Voodoo. If it fails or has static sound, do as what Pixel Eater suggests. I'm pretty sure there are a lot of patched sound drivers for your card.

Thanks guys, downloading now.

thanx i'll try

Good luck, seed needed...

Lite of iDeneb v1.6 10.5.8 installs Just Fine How ever even with -v boot flag I end up with a Black Screen and the HDD Never Loads???
Any Clue to what is causing this???
my system specs.
AMD 5200+
mobo Asus M2NPV-VM
2 Gig Cossair DRR 800
150 Gig WD Ide
Ati 3870

How to get only kext from this dvd- iso?

Where? I cant find a real files, only fakes, plis? tell me where you download?

Thanks!!!!

My problem is no detect HDD when i tried installed this version. Seem this problem like as ver iDeneb 10.5.7 v1.5 which no have fix PPF v1.5.1.

Can anyone please tell me the md5 of their ideneb v1.6 10.5.8 Lite ISO that works? I'm not sure if the one I have is the real thing since it didn't come with the md5.rtf document. Thanks!

Why isnt my external drive and card reader recognized during install? Is there a command i can use during the bootloader? I like to have osx86 boot to my external so i dont have to dual boot or switch drives in and out. iPC is the only one that works but i would like to play around with iDeneb.

This is the best version I've ever tried. Using an asus p5kpl mobo.....the system feels like it was built by apple themselves.....rock steady....lol!!!


NICE WORK JACK!

Are there any boot flags we can use other than the standard -v or cpus=1, for instance some alternate kernels or something? I'm stuck with "still waiting for root device".

What name & password works? This installed on top of an existing system (JaS) 10.5.4 successfully, but the Administrator account was also changed to something new; the previous password doesn't work.
Even changing the time of day requires name & password; the "padlock" was changed to "locked".

I installed iDeneb v1.6 10.5.8 Lite Edition on my computer, expecting that my GTX260 would work, but.....no.
Afterwards i even tried to download a .pkg installer for the GTX200 series graphics cards - still not working. I can't even force the resolution 1920x1080x32 on my Acer X233H monitor.

Any1 got suggestions on how to solve this?
- Thanks

supporting ati radeon hd 3850?

Awesome - I thought i'd try choosing installing all drivers once more, with the older version bootloader, and now everything works perfectly!

For the GFX i chose the new alpha version vRAM-detector.

GeForce GTX 260:

Chipset Model: GeForce GTX 260
Type: Display
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 896 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x05e2
Revision ID: 0x00a1
Displays:
ACER X233H:
Resolution: 1920 x 1080 @ 60 Hz
Depth: 32-Bit Color
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
QuartzGL: Supported

How can i add more languages to the system after install? i want Swedish but i dont know how to "install" it.

If i don't selllect any kernel in which is installed????

I have:

Motherboard: Intel Lakeport GI945GC
RAM: 2 GB 667mhz
S-ATA: 300 GB Samsung
VGA: Intel GMA 950
LAN: Realtek 8139/810X
Sound: Sigmatel STA C9221

I installed iDeneb 10.5.8 and my ethernet was fine (before restart computer)
But when I restar my Hackinstosh my ethernet controller still exist however say "the cable is unplugued" and the cable was plugged.

Anyone know solve this ?

Best Regards

I don't have internet access at all! I installed iAtkos v7 before with the same network driver(nForce) and it worked. but it doesn't works in iDeneb v1.6

one more problem is that iDeneb doesn't detects my dvd-rom! I also have wireless network card with drivers on cd and when I put the cd - nothing happens, no messages, no new drives on desktop as well as in "explorer" =)

don't know what to do. no dvd-rom = no internet, no internet = no mac(

I tried Ideneb 1.6 everyday since its out. And still no fully functional install. Getting sick of it!!

Someone help me. I have an Asus P5B Deluxe. When my internet works then my firewire doesnt work. I remove the AppleHPET.kext , do a restart. Then the whole system doesnt start anymore. it crashes when entering Leo. AAAAAGGH

I've installed this distro and most of my hardware seems fairly functional.

My only issue is, when I install the kexts for my GC (Nvidia Geforce 8500 GT) the resolution changes and everthing looks great. Untill I try to use the mouse, it's inverted Up is down, left is right ect and it's jumpy... if I remove Nvinject.kext it reverts back to 1024x746 and the mouse is fine. There is also an issue with using the search bar in Finder or trying to change the screensaver in 1680x1050 it will sorta freeze up but the mouse still moves and will switch from inverted to normal function repeatedly.

Any assistance on fixing this problem would be greatly appreciated!!

UPDATE: I've found a solution!! I gathered up all the Geforce and nVidia kexts from Leopard 10.5.5 system and installed them into 10.5.8 using OSX86Tools and it works like a dream!! Hopes it helps others

It support AMD Athlon 64 3000+ SSE2? And what kernel i should select?

hi gorro,
i thought as well that I did not have dvd but it was there.
Try to run:
A /System/Library/CoreServices/Menu Extras/Eject.menu
it should appear on the top panel. At least it was my problem.
Regards,
bozon42

PS: i have another problem - i cannot restart/shutdown my desktop pc.

Works Great!

I have one of the most incompatible boards in the world, the ECS G33T-M2 (V1.0) and it works great.

Thanks Jack Layne, you my friend are a God!

use the Azalia ones and then edit as mentioned in the topic about ALC88x

I have the same issue. I installed 10.5.7 using iATKOS. If I do not select any videos patches (by the way my video card is an eVGS Nvidia 8400 GS PCI-E) default video is 1024x768 no QE/CI supported. I try multiple patches. The one that seems to work (at least to have 1280x1024 display is teh old NVkush. But no QE/CI ( ). I compared it to my existing 10.5.5 system and the IOPCIMatch settings are the same but no QE/CI. As soon as I get this video drivers my mouse goes inverted and jerky.
Couple of oops in the installed - Software Update hangs and Installer hangs. I solved the installer by using Pacifist. Have not figure out the SU. By the way I can update to the 10.5.8 ComboUpd.pk from apple without doing anything special

Is there also a full version available? I am still searching drivers for sb600/690G. Or i am wrong in this drivers includet into the lite version?

Thanks for answer

Just installed Ideneb 1.6 on my PC. It`s great and work like a charm. Thank you verry much.
Sorry, I can`t right now to tel you my hardware configuration but maybe I will some other time.