Hi,
I have installed this Distro and it works very good out of the box.
But I have a problem with the system-language.
If I set the language to german, the preferences and the finder are not set to german. Most options are in english and only a few are in german.
Other programms are ok.
I did not have this problem with iDeneb 1.3.
So what can I do?
Full Version: Samsung NC10 UK revision
Pages: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39
Well, I've tried everything to get my Dell 1490 card working in XP. Tried several different drivers, uninstalling and reinstalling, etc. Every time, I get this message:
Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)
So I guess my options now are to reinstall windows XP or maybe get a different card (Dell 1390)?
Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)
So I guess my options now are to reinstall windows XP or maybe get a different card (Dell 1390)?
QUOTE (abirch @ Jan 5 2009, 03:40 PM) 
Well, I've tried everything to get my Dell 1490 card working in XP. Tried several different drivers, uninstalling and reinstalling, etc. Every time, I get this message:
Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)
So I guess my options now are to reinstall windows XP or maybe get a different card (Dell 1390)?
Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)
So I guess my options now are to reinstall windows XP or maybe get a different card (Dell 1390)?
I recently bought a Dell 1505 from ebay and used the broadcom drivers mentioned a page or two back on this thread and it worked fine in XP, if that's any help.
QUOTE (SilSha @ Jan 5 2009, 04:34 PM)
Hi,
I have installed this Distro and it works very good out of the box.
But I have a problem with the system-language.
If I set the language to german, the preferences and the finder are not set to german. Most options are in english and only a few are in german.
Other programms are ok.
I did not have this problem with iDeneb 1.3.
So what can I do?
I have installed this Distro and it works very good out of the box.
But I have a problem with the system-language.
If I set the language to german, the preferences and the finder are not set to german. Most options are in english and only a few are in german.
Other programms are ok.
I did not have this problem with iDeneb 1.3.
So what can I do?
Please read the thread, the solution is mentioned more than once!
QUOTE (camdenbloke @ Jan 5 2009, 04:45 PM)
I recently bought a Dell 1505 from ebay and used the broadcom drivers mentioned a page or two back on this thread and it worked fine in XP, if that's any help.
Can someone check their driver for a definitive driver version that works? Thanks.
QUOTE (G4-Flo @ Jan 5 2009, 07:22 PM)
Please read the thread, the solution is mentioned more than once!
Sorry I found nothing.
Can you point out the right posting for me.
Thx.
Thx
I will try it.
I was a bit confused, because I found a lot of different german language packges and I did not know which one is the best to use
I will try it.
I was a bit confused, because I found a lot of different german language packges and I did not know which one is the best to use
QUOTE (SilSha @ Jan 5 2009, 09:08 PM)
Thx
I will try it.
I was a bit confused, because I found a lot of different german language packges and I did not know which one is the best to use
I will try it.
I was a bit confused, because I found a lot of different german language packges and I did not know which one is the best to use
Try the link benir posted. It can never be wrong to use the latest one.
QUOTE (srcshelton @ Jan 5 2009, 01:55 PM)
CODE
(( PCIDEVICE = $( sudo reggie_se -D PentiumM -x 2>&1 | grep "Display controller: " | cut -d. -f 1 ) ))
sweet idea - could've come up with that myself =8) Anyway, I was figuring that this would be fighting the symptoms so I compared the output of reggie_se -x before and after the first sleep. Here's the sdiff, dump1 being before, dump2 after sleep:
CODE
nc10:~ jzee$ sdiff dump1 dump2
. 4.6.1 (227) . 4.6.1 (227)
PCI Devices PCI Devices
0. Host PCI bridge: AppleACPIPCI (0:0:0:0) 0. Host PCI bridge: AppleACPIPCI (0:0:0:0)
1. VGA-compatible controller: GFX0 (0:0:2:0) 1. VGA-compatible controller: GFX0 (0:0:2:0)
2. Multimedia device: HDEF (0:0:27:0) 2. Multimedia device: HDEF (0:0:27:0)
3. PCI-PCI bridge: RP01 (0:0:28:0) 3. PCI-PCI bridge: RP01 (0:0:28:0)
4. Network controller: PXS1 (0:2:0:0) 4. Network controller: PXS1 (0:2:0:0)
5. PCI-PCI bridge: RP03 (0:0:28:2) | 5. USB UHCI controller: USB1 (0:0:29:0)
6. USB UHCI controller: USB1 (0:0:29:0) | 6. USB UHCI controller: USB2 (0:0:29:1)
7. USB UHCI controller: USB2 (0:0:29:1) | 7. USB UHCI controller: USB3 (0:0:29:2)
8. USB UHCI controller: USB3 (0:0:29:2) | 8. USB UHCI controller: USB4 (0:0:29:3)
9. USB UHCI controller: USB4 (0:0:29:3) | 9. USB2 EHCI controller: USB7 (0:0:29:7)
10. USB2 EHCI controller: USB7 (0:0:29:7) | 10. PCI-PCI bridge: PCIB (0:0:30:0)
11. PCI-PCI bridge: PCIB (0:0:30:0) | 11. PCI-ISA bridge: LPCB (0:0:31:0)
12. PCI-ISA bridge: LPCB (0:0:31:0) | 12. IDE controller: SATA (0:0:31:2)
13. IDE controller: SATA (0:0:31:2) | 13. SMBus controller: SBUS (0:0:31:3)
14. SMBus controller: SBUS (0:0:31:3) | 14. Display controller: display (0:0:2:1)
15. Display controller: display (0:0:2:1) | 15. Host PCI bridge: pci8086,27ac (0:0:0:0)
16. Host PCI bridge: pci8086,27ac (0:0:0:0) <
. 4.6.1 (227) . 4.6.1 (227)
PCI Devices PCI Devices
0. Host PCI bridge: AppleACPIPCI (0:0:0:0) 0. Host PCI bridge: AppleACPIPCI (0:0:0:0)
1. VGA-compatible controller: GFX0 (0:0:2:0) 1. VGA-compatible controller: GFX0 (0:0:2:0)
2. Multimedia device: HDEF (0:0:27:0) 2. Multimedia device: HDEF (0:0:27:0)
3. PCI-PCI bridge: RP01 (0:0:28:0) 3. PCI-PCI bridge: RP01 (0:0:28:0)
4. Network controller: PXS1 (0:2:0:0) 4. Network controller: PXS1 (0:2:0:0)
5. PCI-PCI bridge: RP03 (0:0:28:2) | 5. USB UHCI controller: USB1 (0:0:29:0)
6. USB UHCI controller: USB1 (0:0:29:0) | 6. USB UHCI controller: USB2 (0:0:29:1)
7. USB UHCI controller: USB2 (0:0:29:1) | 7. USB UHCI controller: USB3 (0:0:29:2)
8. USB UHCI controller: USB3 (0:0:29:2) | 8. USB UHCI controller: USB4 (0:0:29:3)
9. USB UHCI controller: USB4 (0:0:29:3) | 9. USB2 EHCI controller: USB7 (0:0:29:7)
10. USB2 EHCI controller: USB7 (0:0:29:7) | 10. PCI-PCI bridge: PCIB (0:0:30:0)
11. PCI-PCI bridge: PCIB (0:0:30:0) | 11. PCI-ISA bridge: LPCB (0:0:31:0)
12. PCI-ISA bridge: LPCB (0:0:31:0) | 12. IDE controller: SATA (0:0:31:2)
13. IDE controller: SATA (0:0:31:2) | 13. SMBus controller: SBUS (0:0:31:3)
14. SMBus controller: SBUS (0:0:31:3) | 14. Display controller: display (0:0:2:1)
15. Display controller: display (0:0:2:1) | 15. Host PCI bridge: pci8086,27ac (0:0:0:0)
16. Host PCI bridge: pci8086,27ac (0:0:0:0) <
... meaning that somehow the OS loses grip of PCI-bridge RP01?
Does anyone have a clue why this could be? It 100% reproducible on my machine. Thanks for any hints!
Cheers,
jzee
QUOTE (jay zee @ Jan 5 2009, 10:59 AM)
Are you saying that the brightness scripts still work for you, even after you sent the NC10 to sleep and woke it up again?
Jay Zee-
That is what I'm saying (just did it to double check). To be sure, I don't keep Quicksilver running in the background, however. I just run the script, lower my brightness, and then turn Quicksilver off. But even then, after lowering my brightness, I can go to sleep, wake it back up, and the brightness is still at the lowered setting I left it at.
And, just in case I'm reading your question another way: The Quicksilver script also works when I make adjustments after waking from sleep (but again, I wake computer, I run Quicksilver, alter brightness, then quit Quicksilver).
I realize that you may keep Quicksilver running all of the time, so I don't know if what I'm talking about here applies to the issue you are finding.
Hi Mysticus,
I have found this package http://soleilblog.hp.infoseek.co.jp/2finger/2finger-wind.pkg in a chinese forum which enables scrolling on msiwind in mac.
i tried to install it onto nc10 it works in some way but obviously not very accurate.
I am no expert so i just want to share this information to see if it helps to develop a package for nc10 users.
i might have been brave, but i am not sure how i can "uninstall" this package
.
thanks.
Edit: setting Library\Preferences\com.apple.driver.PS2Trackpad.plist "ZAcceptThreshold" value to 70 makes it better on nc10.
I have found this package http://soleilblog.hp.infoseek.co.jp/2finger/2finger-wind.pkg in a chinese forum which enables scrolling on msiwind in mac.
i tried to install it onto nc10 it works in some way but obviously not very accurate.
I am no expert so i just want to share this information to see if it helps to develop a package for nc10 users.
i might have been brave, but i am not sure how i can "uninstall" this package
. thanks.
Edit: setting Library\Preferences\com.apple.driver.PS2Trackpad.plist "ZAcceptThreshold" value to 70 makes it better on nc10.
I did this with another Distri
http://forum.insanelymac.com/index.php?sho...2+finger+scroll and it works.
I did not tested it with this special NC10 Distri.
http://forum.insanelymac.com/index.php?sho...2+finger+scroll and it works.
I did not tested it with this special NC10 Distri.
i can't register on demonoid.com can someone send me a pm with the iso.torrent? thanks
google the name of the torrent
you will find it somewhere else
you will find it somewhere else
QUOTE (SilSha @ Jan 6 2009, 06:19 PM)
I did this with another Distri
http://forum.insanelymac.com/index.php?sho...2+finger+scroll and it works.
I did not tested it with this special NC10 Distri.
http://forum.insanelymac.com/index.php?sho...2+finger+scroll and it works.
I did not tested it with this special NC10 Distri.
After installing the package the mouse accuracy is not good enough so i revert back to the old trackpad.
thanks.
QUOTE (jay zee @ Jan 4 2009, 03:29 PM)
3. WLAN
I spent way too many hours trying to get the stock WLAN card to work. Using the hints from many forums on the web I managed to get it working several times using a hacked Atheros kext and KisMAC to set the card into passive mode. In the end, however, this turned out to be more frustrating than anything else because it wouldn't work reliably. So I bought a random BCM4311-based card (checked eBay) and it worked out of the box. No need to mention that this got rid of the setup loop problem, too (see above).
To run the BCM4311 under XP I found this site and chose the latest driver package, installed it using the device manager and it just works.
I spent way too many hours trying to get the stock WLAN card to work. Using the hints from many forums on the web I managed to get it working several times using a hacked Atheros kext and KisMAC to set the card into passive mode. In the end, however, this turned out to be more frustrating than anything else because it wouldn't work reliably. So I bought a random BCM4311-based card (checked eBay) and it worked out of the box. No need to mention that this got rid of the setup loop problem, too (see above).
To run the BCM4311 under XP I found this site and chose the latest driver package, installed it using the device manager and it just works.
THANK YOU! The link to the Broadcom driver you provided finally got my Dell DW1490 working on Windows XP. Just click the link above, download the most recent driver (at the top of the list), unzip it, and point your Add Hardware Wizard to the folder location. Done. Whew!
I don't know if this has been covered, but before I install OSX using Mysticus' technique, is there any way to resize my 160gb HD partitions? When I first got the NC10, I set up the C: partition as 120gb, there is 30gb left unallocated (for Mac OSX) and the rest is recovery volume. Is there anyway to shrink up the 120gb partition and add the space to the future Mac partition?
Thanks!
QUOTE (abirch @ Jan 6 2009, 06:48 PM)
THANK YOU! The link to the Broadcom driver you provided finally got my Dell DW1490 working on Windows XP. Just click the link above, download the most recent driver (at the top of the list), unzip it, and point your Add Hardware Wizard to the folder location. Done. Whew!
I don't know if this has been covered, but before I install OSX using Mysticus' technique, is there any way to resize my 160gb HD partitions? When I first got the NC10, I set up the C: partition as 120gb, there is 30gb left unallocated (for Mac OSX) and the rest is recovery volume. Is there anyway to shrink up the 120gb partition and add the space to the future Mac partition?
Thanks!
I don't know if this has been covered, but before I install OSX using Mysticus' technique, is there any way to resize my 160gb HD partitions? When I first got the NC10, I set up the C: partition as 120gb, there is 30gb left unallocated (for Mac OSX) and the rest is recovery volume. Is there anyway to shrink up the 120gb partition and add the space to the future Mac partition?
Thanks!
Partition managers like Partition magic will do the job. I have to use it because the XP util can't format FAT32 for the D: ddmac setup
Only choice I had was NTFS
With PM I do the FAT32 formatting.
QUOTE (G4-Flo @ Jan 5 2009, 09:12 PM)
Try the link benir posted. It can never be wrong to use the latest one.
Hi,
I sued the link posted above and it seems to work.
Everything is in german now. But if if click on Finder -> Preferences (in german "Einstellungen") than the finder crashes and reloads.
Do not know if this has something to do with the language but what can I do to solve this?
edit:
if I change the language to english everything works. I can go to the preferences, no crash.
QUOTE (SilSha @ Jan 6 2009, 07:48 PM)
Hi,
I sued the link posted above and it seems to work.
Everything is in german now. But if if click on Finder -> Preferences (in german "Einstellungen") than the finder crashes and reloads.
Do not know if this has something to do with the language but what can I do to solve this?
edit:
if I change the language to english everything works. I can go to the preferences, no crash.
I sued the link posted above and it seems to work.
Everything is in german now. But if if click on Finder -> Preferences (in german "Einstellungen") than the finder crashes and reloads.
Do not know if this has something to do with the language but what can I do to solve this?
edit:
if I change the language to english everything works. I can go to the preferences, no crash.
Hm, maybe you used a too old german.pkg file. Are you running 10.5.6?
Is your system completely up to date? Try by using "Softwareaktualisierung".
You should also repair permissions.
Please post if it worked.
Hi,
yes I am on 10.5.6 and all software is up to date.
Repairing permissions does not work
How can I see if my Language file is to old?
The file I used was for Leo. The link was posted above (a page before or so)
yes I am on 10.5.6 and all software is up to date.
Repairing permissions does not work
How can I see if my Language file is to old?
The file I used was for Leo. The link was posted above (a page before or so)
QUOTE (abirch @ Jan 6 2009, 06:48 PM)
THANK YOU! The link to the Broadcom driver you provided finally got my Dell DW1490 working on Windows XP. Just click the link above, download the most recent driver (at the top of the list), unzip it, and point your Add Hardware Wizard to the folder location. Done. Whew!
you're welcome
glad my post actually helped someone. Yeah, the DW1490's actually have a BCM4311 -- I should've mentioned that in the post. On your partitioning problem: use partition magic or the free parted magic
Good luck and happy hacking,
jay zee
Has anyone had any luck using iMovie with an AVCHD cam corder?
I was looking at this patch, but want to know if it'll work before I dive right in...!
http://forum.insanelymac.com/index.php?sho...101902&st=0
I was looking at this patch, but want to know if it'll work before I dive right in...!
http://forum.insanelymac.com/index.php?sho...101902&st=0
QUOTE (SilSha @ Jan 6 2009, 09:23 PM)
Hi,
yes I am on 10.5.6 and all software is up to date.
Repairing permissions does not work
How can I see if my Language file is to old?
The file I used was for Leo. The link was posted above (a page before or so)
yes I am on 10.5.6 and all software is up to date.
Repairing permissions does not work
How can I see if my Language file is to old?
The file I used was for Leo. The link was posted above (a page before or so)
it seems the file is too old...
i took this one and it was working fine.. even trackpad menu was on the right place (but without function, if you dont install the trackpadfull.pkg)
this is the same file I used.
I checked it with an MD5 Hash
I checked it with an MD5 Hash
QUOTE (DeiMudda @ Jan 6 2009, 11:00 PM)
it seems the file is too old...
i took this one and it was working fine.. even trackpad menu was on the right place (but without function, if you dont install the trackpadfull.pkg)
i took this one and it was working fine.. even trackpad menu was on the right place (but without function, if you dont install the trackpadfull.pkg)
Normally, the language package isn't responsible for the trackpad-prefpane. If trackpadprefpane isn't in place, it's because the vendor id wasn't deleted in the package of the prefpane. It's no matter of the language. The only issue you could have had was at 10.5.5 if you had the german.pkg installed and active, you've not been able to open trackpad settings. You had to switch to english before you've been able to open the settings. But that was the old Keyboard & Mouse prefpane. Now there is a stand-alone prefpane wich has to be modified before it shows up. Otherwise you won't be able to ad it to system preferences. Again, that's no matter of language, it's because of the vendor ID inside the prefpane.
SilSha, try another german.pkg. I've used the german.pkg from an original leo dvd and it works without any problems.
Hi,
it is strange that the german package does not work for you!
I´ve used it with the 10.5.6 from mysticus, and now i have a full german osx!
it is strange that the german package does not work for you!
I´ve used it with the 10.5.6 from mysticus, and now i have a full german osx!
QUOTE (-benir @ Jan 7 2009, 02:30 AM)
Hi,
it is strange that the german package does not work for you!
I´ve used it with the 10.5.6 from mysticus, and now i have a full german osx!
it is strange that the german package does not work for you!
I´ve used it with the 10.5.6 from mysticus, and now i have a full german osx!
@-benir & SilSha: Did you install the german.pkg BEFORE updating your system or after that?
Please both explain your way of installation, for eg did you first create a 10.5.6 iso file or did you install the 10.5.4 original package and updated step by step to 10.5.6?
Maybe this makes the difference...
I can tell, I've installed the original JaS 10.5.4, installed the german.pkg and updated step by step to 10.5.4.
I have used the iso from mysticus.
After installing the ISO I am on 10.5.6 end everything works.
Than I updated some software with the integrated updater. (updated Java/iTunes etc.)
Than I installed the german.pkg.
After installing the ISO I am on 10.5.6 end everything works.
Than I updated some software with the integrated updater. (updated Java/iTunes etc.)
Than I installed the german.pkg.
Ok,
maybe you should try to re-install your system or re-install by going the old way that worked fine for me using the JaS 10.5.4 and the first NC10 Package from Mysticus and perform a step-by-step update to 10.5.6.
You can also post your console-logs here, maybe someone can read out of it the failure.
Otherwise try the method of creating a new user-account mit admin rights and see if the issue still occurs.
maybe you should try to re-install your system or re-install by going the old way that worked fine for me using the JaS 10.5.4 and the first NC10 Package from Mysticus and perform a step-by-step update to 10.5.6.
You can also post your console-logs here, maybe someone can read out of it the failure.
Otherwise try the method of creating a new user-account mit admin rights and see if the issue still occurs.
i have used the 10.5.6 iso from biketown like SilSha... then i installed the german package linked above and everything is working quite fine!
The System is now completly in german?
Please go to Finder->Einstellungen. Can yo see the properties or will the finder crash and restart?
On the installation, did you had the welcome loop?
Mayby something went wrong with my Installation.
Please go to Finder->Einstellungen. Can yo see the properties or will the finder crash and restart?
On the installation, did you had the welcome loop?
Mayby something went wrong with my Installation.
QUOTE (SilSha @ Jan 7 2009, 11:13 AM)
The System is now completly in german?
Please go to Finder->Einstellungen. Can yo see the properties or will the finder crash and restart?
On the installation, did you had the welcome loop?
Mayby something went wrong with my Installation.
Please go to Finder->Einstellungen. Can yo see the properties or will the finder crash and restart?
On the installation, did you had the welcome loop?
Mayby something went wrong with my Installation.
Is see the properties...
and i had no welcome loop...
...sorry...
Just noticed that Superhai's Voodoopower (The replacement for GenericCPUPowerManagement) supposedly supports the Atom. Has anybody tried it on their NC10?
Andy.
Andy.
QUOTE (camdenbloke @ Jan 7 2009, 05:47 PM)
Just noticed that Superhai's Voodoopower (The replacement for GenericCPUPowerManagement) supposedly supports the Atom. Has anybody tried it on their NC10?
Andy.
Andy.
Answering my own question... installed it and it seems to work fine... CPU varies between 797MHz and full speed depending upon load. wonder how much it will affect battery life?
QUOTE (camdenbloke @ Jan 7 2009, 06:22 PM)
Answering my own question... installed it and it seems to work fine... CPU varies between 797MHz and full speed depending upon load. wonder how much it will affect battery life?
Andy,
Two things: 1. Can you tell us what system you're running (e.g., are you up to 10.5.6 and with which distro/install?); 2. Please keep us posted on how it goes in terms of battery, etc. If it improves the functioning then we'll all probably try it.
QUOTE (DJKwai @ Jan 7 2009, 06:28 PM)
Andy,
Two things: 1. Can you tell us what system you're running (e.g., are you up to 10.5.6 and with which distro/install?); 2. Please keep us posted on how it goes in terms of battery, etc. If it improves the functioning then we'll all probably try it.
Two things: 1. Can you tell us what system you're running (e.g., are you up to 10.5.6 and with which distro/install?); 2. Please keep us posted on how it goes in terms of battery, etc. If it improves the functioning then we'll all probably try it.
I'm on Mysticus's 10.5.6, installed from the pre built image that was doing the rounds on demonoid. My usage patterns of the NC10 vary very much, so unless it really is a radical change I'm not sure how obvious any improvements will be.
Installation was dead simple - just dropped the kext into kexthelper and rebooted
I'll give it a full charge, and turn the brightness to lowest, and see how long the system reports it can run for.
QUOTE (camdenbloke @ Jan 7 2009, 06:47 PM)
Just noticed that Superhai's Voodoopower (The replacement for GenericCPUPowerManagement) supposedly supports the Atom. Has anybody tried it on their NC10?
Andy.
Andy.
i tried it, it was working fine.. but then.. SYSTEM HALT after some minutes in battery mode..
so i had to delete it again and everything was ok again
QUOTE (DeiMudda @ Jan 7 2009, 08:29 PM)
i tried it, it was working fine.. but then.. SYSTEM HALT after some minutes in battery mode..
so i had to delete it again and everything was ok again
so i had to delete it again and everything was ok again
Strange... Been using it here for over an hour now and it seems fine so far. I'll see how it goes for me.
Ok just a lil sidestep in my usage, problems and stuff i want.
I was noticing in my network prefs that the wifi or airport was labeled as Bluetooth PAN so I changed the name of it to Airport and deleted the second instance of airport underneath it. (big mistake). it disconnected and then I had no airport so I made another airport instance and was able to get airport back but now it said airport not configured even though I was conencted to internet. So the icon in the menu bar looked as if I wasnt connected.
So luckily like mysticus said keep a backup. I found my system configuration folder swaped them out and was back to normal. renamed the bluetoothPAN to Airport Main and left the remaining ones untouched.
Not sure if anybody else has a similar settings. But be careful with your network prefs.. i have a dell 1505 it shows up as a third party adapter those who have a native airport controller will have no problems i think... otherwise the dell 1505 works OOTB... I am just a stickler i was bored and had to play with the settings.
is there something I can edit so that it doesnt show up as third party adapter?
Ok, so here is some things i was researching not sure if I should do it
you can edit it somethings so that when you go to about this mac it shows your processor name (instead of unknown) and your serial if you type them in manually) anybody do that?
Also if you have other macs...if you look in any finder window and you see your samsung nc10 connected it shows the icon as iMac instead of a laptop icon under the shared category... Anybody know how to edit this. I want it to show a laptop icon.
I know who cares right. but I want the conversion to be complete.
Also did anybody have sound via headphones I still cant get it to work
thanks
I was noticing in my network prefs that the wifi or airport was labeled as Bluetooth PAN so I changed the name of it to Airport and deleted the second instance of airport underneath it. (big mistake). it disconnected and then I had no airport so I made another airport instance and was able to get airport back but now it said airport not configured even though I was conencted to internet. So the icon in the menu bar looked as if I wasnt connected.
So luckily like mysticus said keep a backup. I found my system configuration folder swaped them out and was back to normal. renamed the bluetoothPAN to Airport Main and left the remaining ones untouched.
Not sure if anybody else has a similar settings. But be careful with your network prefs.. i have a dell 1505 it shows up as a third party adapter those who have a native airport controller will have no problems i think... otherwise the dell 1505 works OOTB... I am just a stickler i was bored and had to play with the settings.
is there something I can edit so that it doesnt show up as third party adapter?
Ok, so here is some things i was researching not sure if I should do it
you can edit it somethings so that when you go to about this mac it shows your processor name (instead of unknown) and your serial if you type them in manually) anybody do that?
Also if you have other macs...if you look in any finder window and you see your samsung nc10 connected it shows the icon as iMac instead of a laptop icon under the shared category... Anybody know how to edit this. I want it to show a laptop icon.
I know who cares right. but I want the conversion to be complete.
Also did anybody have sound via headphones I still cant get it to work
thanks
Superhai's powermanagement kext works! 
To add a nice touch to your 'about this Mac' screen: open /System -> Library -> CoreServices -> loginwindow.app -> Contents -> Resources -> English.lproj -> AboutThisMac.strings. Look for this line: "ABOUT_BOX_SINGLE_PROCESSOR_FIELD_FORMAT" = "%@". Change "%@" to "1.6 GHz Intel Atom" or something you like. You might have to edit permissions before saving the file.
To add a nice touch to your 'about this Mac' screen: open /System -> Library -> CoreServices -> loginwindow.app -> Contents -> Resources -> English.lproj -> AboutThisMac.strings. Look for this line: "ABOUT_BOX_SINGLE_PROCESSOR_FIELD_FORMAT" = "%@". Change "%@" to "1.6 GHz Intel Atom" or something you like. You might have to edit permissions before saving the file.
QUOTE (camdenbloke @ Jan 7 2009, 08:30 PM)
Strange... Been using it here for over an hour now and it seems fine so far. I'll see how it goes for me.
Just experienced a lockup myself. Seems to be related to audio and the new voodoopower as since installed it sounds seem to stutter... The crash seemed to happen when the machine was playing a system sound.
Bah!
QUOTE (Marijnr @ Jan 7 2009, 08:59 PM)
Superhai's powermanagement kext works!
To add a nice touch to your 'about this Mac' screen: open /System -> Library -> CoreServices -> loginwindow.app -> Contents -> Resources -> English.lproj -> AboutThisMac.strings. Look for this line: "ABOUT_BOX_SINGLE_PROCESSOR_FIELD_FORMAT" = "%@". Change "%@" to "1.6 GHz Intel Atom" or something you like. You might have to edit permissions before saving the file.
To add a nice touch to your 'about this Mac' screen: open /System -> Library -> CoreServices -> loginwindow.app -> Contents -> Resources -> English.lproj -> AboutThisMac.strings. Look for this line: "ABOUT_BOX_SINGLE_PROCESSOR_FIELD_FORMAT" = "%@". Change "%@" to "1.6 GHz Intel Atom" or something you like. You might have to edit permissions before saving the file.
Thats what I read... alright I will do it... also you know how to make the wifi card show up as native in system profiler instead of third part network card?
and are you having sound problems through head phone port?
adamcarter, try this script. I had the same bluetooth PAN problem with a Dell 1490. Audio solutions are in the works...
QUOTE (Marijnr @ Jan 7 2009, 09:15 PM)
adamcarter, try this script. I had the same bluetooth PAN problem with a Dell 1490. Audio solutions are in the works...
ok cool thats what I thought
Uber thanks
i've the iso torrent but there are no seeders can someone seed please??
Absolutely no seeders to iso torrent
Demonoid said the owner deleted the torrent
What to do?????
Demonoid said the owner deleted the torrent
What to do?????
How about a 'state of the NC10' article?
Im about to buy one here in china, but i want to make sure it will run X (otherwise ill buy the MSI wind), and do it easily.
I dont mind shelling out a few extra bucks for a dell card, but it would be awesome if someone put all the info in one place (maybe a wiki article?).
Cheers,
fotoflo
Im about to buy one here in china, but i want to make sure it will run X (otherwise ill buy the MSI wind), and do it easily.
I dont mind shelling out a few extra bucks for a dell card, but it would be awesome if someone put all the info in one place (maybe a wiki article?).
Cheers,
fotoflo
After installing a dell 1490 I too encountered the bluetooth pan problem. I deleted all connections and used the Assist Me dialog, found at the bottom of network preferences, to setup the connection and ever since it's been coming up as airport and showing status in the menu bar. Bluetooth pan... not connected.
Try it yourself.
Try the first post.
Try it yourself.
QUOTE (fotoflo @ Jan 8 2009, 09:26 AM)
I dont mind shelling out a few extra bucks for a dell card, but it would be awesome if someone put all the info in one place (maybe a wiki article?).
Try the first post.
QUOTE (anfan7 @ Jan 8 2009, 07:37 AM)
Absolutely no seeders to iso torrent
Demonoid said the owner deleted the torrent
What to do?????
Demonoid said the owner deleted the torrent
What to do?????
The user has the file not deleted. Demonoid deleted the NC10_JaS.OSx86.10.5.6.Intel.SSE2.SSE3_Mysticus.iso File because it was a password-protected. Please use the http link @ BIKE TOWN .
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.