Finally the answer is here the kext for ATI Radeon HD 3200 working great in 10.5.7 Big Dong Answer Poll Plz Takes 1 sec.Click to view attachment

So you are getting QE/Ci with this kext..??

Yes all working good. What card do you have and osx version?

Will this work in Leapard 10.5.6?

Are you sure??!?! How i can install it? Simple "drag and drop" with kexthelper????

http://www.insanelymac.com/forum/index.php?showtopic=190586

Big deal , you're using dong's framebuffer kext and show to me that QE/CI works with this Radeon HD 3200. AFAIK its just a framebuffer to give you native resolution and such

AFAIK, you can't get QE/CI only with Dong framebuffer, you need also to add your dev id to either the X1000 kext or the x2000 kext. And HD3xxx integrated are not supported.

I have a HD 3100 on board, wich is very similar to our card and I'll love to get QE/Ci, so if you've done something special please share with us

As you can see, dongs framebuffer works with my card, but doesn't get QE/CI:

http://www.insanelymac.com/forum/index.php...p;#entry1305093

So this will not work with my hd 3200 ? I've a pavilion tx 2000 series , everyting work except QE/CI , is any solution at moment?

Excuse for my bad english!

Not working on my HP tx2500 series (pavilion 2640eu). "No kext loaded".
Video card: ATI Radeon 3200

1. I have try this

2. But this:

Can anyone confirm/deny compatibility with snow leopard?

Is this just a repost of dong's framebuffer or some of your own work as well?

this kext did not help for me

MOBO:ECS 780GM-A ONBOARD HD3200
OSX:10.5.8 LEOPARD

HOW DID YOU MANAGE TO USE THIS KEXT WITH YOU HD3200?

I've got RadeonHD.kext.10.5.zip from thread "ATI HD framebuffer driver with src for test", disable HWCursor and its looks good (without CL/QE) on Radeon HD 3200.

You WILL NOT get any QE/CI out of this. As stated before, this only allow you to get res out of you card.

This had the same effect with the HD2600 mobility card.

I get the following error when I try to load it with "kextload -t RadeonHD.kext"


kextload: extension RadeonHD.kext/ appears to be loadable
10RadeonDump is not compatible with its superclass, 9IOService superclass changed?
kextload: a link/load error occured for kernel extension RadeonHD.kext/
link/load failed for extension RadeonHD.kext/
(run kextload with -t for diagnostic output)

I also got a similar link/load error on my tx2513cl with iatkos v7 and Voodoo Kernel. Any suggestions?

can does ATI Radeon HD 4200 use RadeonHD.kext
i use Mainboard: Biostar TA785GE-128

hi.
ive a acer aspire 5530 notebook with RADEON 3200 Card in it.
I installed the kext with osx86 tools but it doesnt work?!


i need a detailed tutorial :-(

after installing kext, what ive to do?

after reboot its still 1024x786 :-(

is there another solution to change resolution?

sorry im a osx86 noob


greetz from germany

This Driver Is For The ATI Radeon HD 3200 Unfortunately QE/CI Does Not Work I Disabled HW Cursor So The Color Block For Mouse Does Not Appear As Stated In Original Post This Is From DONG That Is Why It Says "Big Thanks DONG" If You Want To Install You Can Use Kext Helper Or OsX86 Tools Whichever You Prefer, Or You Can Manually Copy Into /system/library/extensions/, Before You Restart Repair Permissions In Disk Utility If Anyone Has A Way To Enable QE/CI Plz Post A Link Would Be Greatly Appreciated. For TouchSmart TX2 Users Who Have Got Snow To Work I Would Like To Know How Plz. Also There Is A Driver Similar To This For Snow. Thanks

It works?

Doesnt work with Radeon 3200 hd mobile....

Ive installed kext with osx86tools

Device ID is = 0x9612
and
Vendor ID is= 0x1002


I checked and its Radeon3200 HD. But its still 1024x786

WHY

what can i do??

In Systeminfo: "No kext loaded"

I'm using HP dv4 AMD Turion X2, ATi Mobility 3200 HD

Can change resolution to native 1280x800... but my mouse cursor is seriously distorted
But full laptop LCD resolution

I have just setup into my PC for ATI Radeon HD 4200 and nothing happen

This Driver Is For The ATI Radeon HD 3200 Unfortunately QE/CI Does Not Work I Disabled HW Cursor So The Color Block For Mouse Does Not Appear As Stated In Original Post This Is From DONG That Is Why It Says "Big Thanks DONG" If You Want To Install You Can Use Kext Helper Or OsX86 Tools Whichever You Prefer, Or You Can Manually Copy Into /system/library/extensions/, Before You Restart Repair Permissions In Disk Utility If Anyone Has A Way To Enable QE/CI Plz Post A Link Would Be Greatly Appreciated. For TouchSmart TX2 Users Who Have Got Snow To Work I Would Like To Know How Plz. Also There Is A Driver Similar To This For Snow. Thanks. If you have distorted mouse check the info.plist and make sure hwcursor=false if it is already false try true

i tested it with iatkos_v7 and ideneb (1.5??) and it didnt work

I installed the MacAir Bios Enabler... is THAT the problem?

i installed the kext with osx86 tools...

NOTHING WORKS :-(

Any instructions? Whats the best hackintosh distr.? i think iatkos_v7.... it runs great.. but not with Ati :

tested again without smbios. Same Problem

Voodoo Kernel x7 und x5.... Same Problem again


My Aspire 5530 didnt work with this kext.

Are they any other things that ive to install to use the kext from post #1 ?

Nope, it ain't works..

Itz a HP pavillion tx2640er tablet PC..

Hey guys, could any of help me out? Im new here. Im currently using HP Pavillion Dv2 - 1003AX. Its a AMD Athlon-Neo Processor, with ATI Mobility Radeon HD 3450 graphic card. I was just wondering whether the Mac OS X 10.5.6 would work on my laptop. And if yes, where could i find the instructions to do so. I'd really appreciate it if someone could help me out here.

How do I disable hardware cursor in this? I get the square mouse pointer thing after installing

Show package contents of the kext, open the plist file, towards bottom of file the value of HWcursor is true, change the value to false, even though i am pretty sure i saved it like that before upload but if you are using another variation of the file that is how you do it anyways

Awesome... somehow I missed that the first time I searched the file

Any updates to the kext??? so that every ati 3200 user can use it...

Can i find kexts for the radeon hd 4200 ? plz help

So this works? Or it doesn't? Or it only works for some people?

i install ideneb 1058 the last version and recognize the ATI 3200

but the resolution 1024x768

whit this kext which is the maximum screen resolution???


(sorry i am noob in it)

ha i need wit ati radeon hd 3200 for mac os x snow leoperd can u help me plz