dimotion MicroE2G0 or Qbox-N270
2GB RAM 320GB SATA
Northbridge: Intel® 945GC
Southbridge: ICH7
Audio: 5.1 channel HDA by Realtek® ALC662
GMA950 Integrated Graphics on Board
LAN: 10/100MBit LAN, Realtek® RTL8100C
Found as AppleRTL8169Ethernet
WLAN realtek RTL8187SE
what i did so far:
removed hd and installed 10.5.6 with the mechdrew method 4 externally
http://osx.mechdrew.com/guides/nbi4.shtml
maybe this could help as well, cause i saw that the chipsets are quite the same.
http://www.osnews.com/story/21564/Building..._Can_t_Sue_You_
removed the AppleIntelCPUPowerManagement.kext
installed back the hd
powered on an pressed DEL for the amibios setup screen.
in the fox central control unit:
cpu spread spectrum enabled
pcie spread spectrum enabled
in the cpu config:
Execute-Disable bit capability enabled
hypertreading disabled
Speedstep enabled
c-state tech enabled
saved and exited
booted using -v
booting takes 5 minutes (still not fixed)
usb works
cardreader works
LAN was found as (en2) when i opened the network control panel
there might be another ethernet device on board? goint to find some usblinux for hardware detection.
####wlan
used this driver (Realtek_RTL8187SE_MacOS10.5_Driver_073_UI_1.6.2.zip)
from
http://www.insanelymac.com/forum/index.php?showtopic=174319
wlan found as ethernet en3
###audio
for audioout i used the AppleAzaliaAudio.pkg installer
form the iPC OSx86 10.5.6 Universal PPF5 (Final).iso
no audio-in at the moment
##### graphics
for a better than the 800x600 resolution :
http://www.hackint0sh.org/f133/16448.htm
/Library/Preferences/SystemConfiguration/com.apple.Boot.plist:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Kernel</key>
<string>mach_kernel</string>
<key>Kernel Flags</key>
<string>-legacy</string>
<key>Boot Graphics</key>
<string>Yes</string>
<key>Timeout</key>
<string>10</string>
<key>Graphics Mode</key>
<string>1280×1024×32</string>
</dict>
</plist>
screen sharing does not work, qbox crashes after connecting
booting is still about 5 minutes.
sleep does not work :-)
@admin
for the osx386 database, a systems button would be great.