Full Version: ALC88x 10.4.8 Kext
sorry if this has already been answered; I've already run a search for it with no results, but the ALC 885 chipset?! aside from the azalia fix, is there anything else out there? The azalia one gives sound out only and no front panel support. I'd really like front panel and mic in if possible. any advice?
Hi o all of you:) I have an fujitsu siemens amilo pi1505 with Kalliway 10.5.2 and has this sond card: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 02), acording to what I have read in this forum the driver for this card is ALC883Audio.mpkg or the AzaliaAudio.pkg, the thing is that I have installed both and the sound is still a no go, can you help me? Thanks! I´ll attach my lspci...
Just wanted to give my input about my sound issue. I tried both Alc883Audio.mpkg and AzaliaAudio.pkg. The first one - Alc883Audio.mpkg didn't work using 6 ports, digital. When I chose 3 ports digital the input and output showed up but no sound. Then I tried the other choices and still no sound. Then I tried AziliaAudio.pkg and it worked, at least for output. Doesn't show any input device, but I am only concerned with getting sound out, at least for now.
My installation runs almost perfect using leo4all 10.5.2. My other minor issues belong under other topics so I won't mention them here.
Here are the stats on my system:
Intel® 945GC & ICH7
North Bridge: Intel® 945GC
South Bridge: Intel® ICH7
MOBO - Integrated Intel Graphics Media Accelerator 950 ( GMA950 ) (inserted EVGA GeForce 9500 GT Video Card - 512MB DDR2, PCI Express 2.0, SLI Support, (Dual Link) Dual DVI, HDTV, VGA Support for my 2 LCD monitors, that will be the next thing to get to work - dual monitors.) Max Dynamic Video Memory up to 224MB(System Memory greater than or equal to 512MB)
SOUND - Realtek ALC883 6-channel HD audio CODEC
CPU - Intel Core 2 Duo E4600 Processor HH80557PG0562M - 2.40GHz, 2MB Cache, 800MHz FSB, Allendale, Dual Core, OEM, Socket 775
RAM - Corsair TWINX Dual Channel 2048MB PC5400 DDR2 667MHz Memory (2 x 1024MB)
I just want to thank everyone who posts their successes and failures. I have been doing a lot of reading to find what might work for my system. Without you all, I would not have a working system.
My installation runs almost perfect using leo4all 10.5.2. My other minor issues belong under other topics so I won't mention them here.
Here are the stats on my system:
Intel® 945GC & ICH7
North Bridge: Intel® 945GC
South Bridge: Intel® ICH7
MOBO - Integrated Intel Graphics Media Accelerator 950 ( GMA950 ) (inserted EVGA GeForce 9500 GT Video Card - 512MB DDR2, PCI Express 2.0, SLI Support, (Dual Link) Dual DVI, HDTV, VGA Support for my 2 LCD monitors, that will be the next thing to get to work - dual monitors.) Max Dynamic Video Memory up to 224MB(System Memory greater than or equal to 512MB)
SOUND - Realtek ALC883 6-channel HD audio CODEC
CPU - Intel Core 2 Duo E4600 Processor HH80557PG0562M - 2.40GHz, 2MB Cache, 800MHz FSB, Allendale, Dual Core, OEM, Socket 775
RAM - Corsair TWINX Dual Channel 2048MB PC5400 DDR2 667MHz Memory (2 x 1024MB)
I just want to thank everyone who posts their successes and failures. I have been doing a lot of reading to find what might work for my system. Without you all, I would not have a working system.
I installed Kalyway 10.5.2 on my XFX MG-630I-7109 with an Nvidia 7600 GT (PCIe) video card and everything is working great except the audio. The onboard audio consists of 8 channels. A Realtek ALC888 audio card and an Nvidia HD audio card, SPDIF-In and SPDIF-Out. FYI, since this board uses an nForce 630i chipset, I am utilizing the sleepkernel.
I installed the ALC888Audio.mpkg and tried each of the different KEXTs, 3 channels, 3 channels + digital, 6 channels, 6 channels + digital, but nothing worked.
I then downloaded HDA Patcher 1.2 and used the attached KEXT dump, but that did not work either.
Any help is greatly appreciated. This is my first OSX86 install so my Mac/Linux knowledge although getting better, is minimal.
I installed the ALC888Audio.mpkg and tried each of the different KEXTs, 3 channels, 3 channels + digital, 6 channels, 6 channels + digital, but nothing worked.
I then downloaded HDA Patcher 1.2 and used the attached KEXT dump, but that did not work either.
Any help is greatly appreciated. This is my first OSX86 install so my Mac/Linux knowledge although getting better, is minimal.
skippyretard: i tried your alc 888 drivers and azilla audio but both don't work
Onboard Audio
Audio Chipset Realtek ALC888
Audio Channels 8 Channels
Newegg:
http://www.newegg.com/product/product.aspx...N82E16813138061
Onboard Audio
Audio Chipset Realtek ALC888
Audio Channels 8 Channels
Newegg:
http://www.newegg.com/product/product.aspx...N82E16813138061
Weird problem here. 3CH is working with Digital, but 6CH fails: No output device found.
Any suggestions? When using 3CH surround is also greyed out, only stereo. I am using a mini-jack SPDIF with an ALC888 chipset on a Acer 5920G laptop.
Thanks in advance!
Any suggestions? When using 3CH surround is also greyed out, only stereo. I am using a mini-jack SPDIF with an ALC888 chipset on a Acer 5920G laptop.
Thanks in advance!
Hi! Thanks for that topics.
I have an ALC888S with ICH7. The ALC888Audio.mpkg.zip, when I start install, tells me that only users, with ICH8, have reported success with this kext.
Is there a way to installed my chipset?
I have an ALC888S with ICH7. The ALC888Audio.mpkg.zip, when I start install, tells me that only users, with ICH8, have reported success with this kext.
Is there a way to installed my chipset?
Ehm.. what about a working driver for 10.5.5 - ALC 88 (to be precise: Sound Max ADI AD1988A 8-CHANNEL)?
Thank you very much!
Thank you very much!
Anyone been able to get spdif out to work on an Asus P5K-VM? If so, please post your magic incantation. Thanks!
hello, i have installed this back for ALC883, everything is good, but output audiojack doesn't work ?? can anyone help me with this problem? thanks a lot !
hey hey......
i try it....
i try it....
Using this package woke my intel ad1986 (no "a") up !
Thanks man (men)
That acl883 kext pack rocked my audio world.
even the microphone works so now i can bug peeps on skype..
groovy.
That acl883 kext pack rocked my audio world.
even the microphone works so now i can bug peeps on skype..
groovy.
Will ALC888 work with my system? Ive tried running searches but cant seem to find what I'm looking for.
[EDIT] I found what I was looking for. ICH10 + ALC888 on EP43-DS3L
Here -> http://forum.insanelymac.com/index.php?sho...mp;#entry913475
I hope it works for me
[EDIT] I found what I was looking for. ICH10 + ALC888 on EP43-DS3L
Here -> http://forum.insanelymac.com/index.php?sho...mp;#entry913475
I hope it works for me
hi to all.
i have inspiron 6400
core2due 1.7 = only in 1 core my iAtkos leopard is working
ram 4 gigi
sound=sigmatel. i choose applehda patcher and it's working but only the volume up/down in fornt
my modem does not work = i let it go and i use wifi
vga - gma950 = it's working but :
1.why my vga ram is 64?? it's 224 in vista
2.is there any new patch for soud
3.what shoud i do fo core solo. i had to to bios every time that i want to go to mac. i rally need it 2core working for best performance
4-is it good to install ideneb 10.5.5 for solving my cpu problem?
i have inspiron 6400
core2due 1.7 = only in 1 core my iAtkos leopard is working
ram 4 gigi
sound=sigmatel. i choose applehda patcher and it's working but only the volume up/down in fornt
my modem does not work = i let it go and i use wifi
vga - gma950 = it's working but :
1.why my vga ram is 64?? it's 224 in vista
2.is there any new patch for soud
3.what shoud i do fo core solo. i had to to bios every time that i want to go to mac. i rally need it 2core working for best performance
4-is it good to install ideneb 10.5.5 for solving my cpu problem?
All ALC888 kext which I tried did'nt worked 100%. Getting sound but no Mic, Headphone and front jacks. I have Realtek ALC888 codec with 3 port 6 channel 5.1 surround sound. Please help.
thanks it started worked
QUOTE (skippyretard @ Dec 22 2006, 04:28 AM) 
OK, I have started a new thread so I can keep all my drivers together in one easy to find post. For a little background info on this project refer to THIS thread. I would also like to mention that this would not be possible without Semthex, Taruga, TheMax32000, Rene204 and the countless testers that have helped develop these kext!
Skippy
AzaliaAudio.pkg should give 2ch output on most High Def Audio chipsets (updated v1.1)
Click to view attachment
ALC883Audio.pkg includes kext's for ALC883 support on mobo's with 3ports, 3ports w/digital, 6ports and 6ports w/digital
Click to view attachment
ALC888Audio.pkg includes kext's for ALC888 support on mobo's with 3ports, 3ports w/digital, 6ports and 6ports w/digital
Click to view attachment
YOU MUST USE 8.8.1 OR NEWER KERNEL WITH ALC883AUDIO.PKG AND ALC888AUDIO.PKG
If you have 3 outputs working you can setup 5.1 using Audio MIDI Setup found in the /Applications/Utilities/ folder. On the menu bar select "Audio>Open Aggregate Device Editor". Click on the "+" square and it will add a new aggregate device. Now select "Use" next to each output you want to add(usually the first 3) and click "done". Change Default Output to the "Aggregate Device". Now select "Aggregate Device" in the Properties For: box and click on "Configure Speakers". Click "Multichannel" and select "5.1 Surround". When your done configuring your speakers the way you want them, make sure you click "Apply" before "Done". You should now have 5.1 surround sound working.
Skippy
AzaliaAudio.pkg should give 2ch output on most High Def Audio chipsets (updated v1.1)
Click to view attachment
ALC883Audio.pkg includes kext's for ALC883 support on mobo's with 3ports, 3ports w/digital, 6ports and 6ports w/digital
Click to view attachment
ALC888Audio.pkg includes kext's for ALC888 support on mobo's with 3ports, 3ports w/digital, 6ports and 6ports w/digital
Click to view attachment
YOU MUST USE 8.8.1 OR NEWER KERNEL WITH ALC883AUDIO.PKG AND ALC888AUDIO.PKG
If you have 3 outputs working you can setup 5.1 using Audio MIDI Setup found in the /Applications/Utilities/ folder. On the menu bar select "Audio>Open Aggregate Device Editor". Click on the "+" square and it will add a new aggregate device. Now select "Use" next to each output you want to add(usually the first 3) and click "done". Change Default Output to the "Aggregate Device". Now select "Aggregate Device" in the Properties For: box and click on "Configure Speakers". Click "Multichannel" and select "5.1 Surround". When your done configuring your speakers the way you want them, make sure you click "Apply" before "Done". You should now have 5.1 surround sound working.
Hi Skippy could you tell me if any further work is being done on these kexts?
I have a gigabyte ga-p35-ds3l with alc888 (leopard 10.5.5) I've tried every kext under the sun to try and get 3 outputs so I can set up 5.1 sound and still no look.
Cancel that I got it working at last, I setup first using Taruga's patch and a linux dump, I then swapped out the plugins and info.plist from your 6 channel kext, Hey presto. 4 outputs and mic and line input. Hope this helps someone else.
Problem I have now is that I cannot change volume levels with aggragate device, is this normal? Any help anyone?
Umm, I have installed it... and now I need to uninstall or delete... HELP???
thanks a lot it worked ...... now i have the sound ....
Hi to all
I have a problem with sound (no sound) on :
QUAD 6600
Realtek ALC888/1200 INTEL 82801IB ICH9
Leo4all 10.5.2
I tried to install "ALC888Audio.pkg includes kext's for ALC888 support on mobo's with 3ports, 3ports w/digital, 6ports and 6ports w/digital Click to view attachment"
but don't work
Could someone help me ?
Thank you.
I have a problem with sound (no sound) on :
QUAD 6600
Realtek ALC888/1200 INTEL 82801IB ICH9
Leo4all 10.5.2
I tried to install "ALC888Audio.pkg includes kext's for ALC888 support on mobo's with 3ports, 3ports w/digital, 6ports and 6ports w/digital Click to view attachment"
but don't work
Could someone help me ?
Thank you.
QUOTE (grd33 @ Jan 6 2009, 06:08 PM)
Hi to all
I have a problem with sound (no sound) on :
QUAD 6600
Realtek ALC888/1200 INTEL 82801IB ICH9
Leo4all 10.5.2
I tried to install "ALC888Audio.pkg includes kext's for ALC888 support on mobo's with 3ports, 3ports w/digital, 6ports and 6ports w/digital Click to view attachment"
but don't work
Could someone help me ?
Thank you.
I have a problem with sound (no sound) on :
QUAD 6600
Realtek ALC888/1200 INTEL 82801IB ICH9
Leo4all 10.5.2
I tried to install "ALC888Audio.pkg includes kext's for ALC888 support on mobo's with 3ports, 3ports w/digital, 6ports and 6ports w/digital Click to view attachment"
but don't work
Could someone help me ?
Thank you.
try to install AzaliaAudio.pkg.zip. Works for me
Hi everyone! I've been fighting with my P5K for 4 days and finaly I have the sound!!!! I have P5k vith ALC883 on ICH9. If anyone is needed in such dump.dat- Ican send via ICQ or email. My ICQ is 285 781 783. Wish u luck!!!
duuuuudeeee i have the same mainboard and have been also fighting like hell to get it to work but still nothing so plzzzzzzzz helppppppppppppppppp, this is my mail if u want to send anything wael111@gmail.com
i have a
ASUS M2N8-VMX mobo
Azalia ALC883-GR High Difinition Audio 6-channel
i really confuse right now any tuturial how to make it work?
how do i install the driver?
ASUS M2N8-VMX mobo
Azalia ALC883-GR High Difinition Audio 6-channel
i really confuse right now any tuturial how to make it work?
how do i install the driver?
QUOTE (skippyretard @ Dec 22 2006, 04:28 AM)
OK, I have started a new thread so I can keep all my drivers together in one easy to find post. For a little background info on this project refer to THIS thread. I would also like to mention that this would not be possible without Semthex, Taruga, TheMax32000, Rene204 and the countless testers that have helped develop these kext!
Skippy
AzaliaAudio.pkg should give 2ch output on most High Def Audio chipsets (updated v1.1)
Click to view attachment
ALC883Audio.pkg includes kext's for ALC883 support on mobo's with 3ports, 3ports w/digital, 6ports and 6ports w/digital
Click to view attachment
ALC888Audio.pkg includes kext's for ALC888 support on mobo's with 3ports, 3ports w/digital, 6ports and 6ports w/digital
Click to view attachment
YOU MUST USE 8.8.1 OR NEWER KERNEL WITH ALC883AUDIO.PKG AND ALC888AUDIO.PKG
If you have 3 outputs working you can setup 5.1 using Audio MIDI Setup found in the /Applications/Utilities/ folder. On the menu bar select "Audio>Open Aggregate Device Editor". Click on the "+" square and it will add a new aggregate device. Now select "Use" next to each output you want to add(usually the first 3) and click "done". Change Default Output to the "Aggregate Device". Now select "Aggregate Device" in the Properties For: box and click on "Configure Speakers". Click "Multichannel" and select "5.1 Surround". When your done configuring your speakers the way you want them, make sure you click "Apply" before "Done". You should now have 5.1 surround sound working.
Skippy
AzaliaAudio.pkg should give 2ch output on most High Def Audio chipsets (updated v1.1)
Click to view attachment
ALC883Audio.pkg includes kext's for ALC883 support on mobo's with 3ports, 3ports w/digital, 6ports and 6ports w/digital
Click to view attachment
ALC888Audio.pkg includes kext's for ALC888 support on mobo's with 3ports, 3ports w/digital, 6ports and 6ports w/digital
Click to view attachment
YOU MUST USE 8.8.1 OR NEWER KERNEL WITH ALC883AUDIO.PKG AND ALC888AUDIO.PKG
If you have 3 outputs working you can setup 5.1 using Audio MIDI Setup found in the /Applications/Utilities/ folder. On the menu bar select "Audio>Open Aggregate Device Editor". Click on the "+" square and it will add a new aggregate device. Now select "Use" next to each output you want to add(usually the first 3) and click "done". Change Default Output to the "Aggregate Device". Now select "Aggregate Device" in the Properties For: box and click on "Configure Speakers". Click "Multichannel" and select "5.1 Surround". When your done configuring your speakers the way you want them, make sure you click "Apply" before "Done". You should now have 5.1 surround sound working.
sorry for suach a question then how do i install this files to make may ALC833 work?
Thanks for this post.
Hi !
I've got Xxx 10.5.6 installed, and ALC888Audio.mpkg installed too.
Sound is working great, but I can't get Line-in to work. I've tested all config (3 ports, 6 ports...).
Line-in is there, in Audio config, but no sound
Is there something to modify ?
Thx !
I've got Xxx 10.5.6 installed, and ALC888Audio.mpkg installed too.
Sound is working great, but I can't get Line-in to work. I've tested all config (3 ports, 6 ports...).
Line-in is there, in Audio config, but no sound
Is there something to modify ?
Thx !
thanks... but it sounds like washmachine or something xD.. i am new to mac os, is there any equalizer or something to improve sound quality????
easy breezy on acer aspire 5570Z everyting works great!!
only prob is now my machine hangs at shutdown.. any help for a solution would be ideal.. should I use HDAfix? If so, where do I get it?
(I've read that for a lot of ppl it's caused booting issues so I'm scared to try it!)
Any help would be greatly appreciated. Thanks again for the package
only prob is now my machine hangs at shutdown.. any help for a solution would be ideal.. should I use HDAfix? If so, where do I get it?
(I've read that for a lot of ppl it's caused booting issues so I'm scared to try it!)
Any help would be greatly appreciated. Thanks again for the package
QUOTE (kossi @ Aug 27 2007, 12:51 PM)
So I got my alc889a chipset working. I only tested the digital output which provides ac3 pass through in vlc without any problems.
Would be nice, if someone could test some other features like line in etc.
If everything works fine, feel free to build an installer package. Until then install the kexts the ordinary way.
Credit goes to taruga and his awesome AppleHDApatcher
After having trouble uploading the compressed file as an attachment I decided to upload it somewhere else.
Here's the link: alc889a kexts
kossi
Would be nice, if someone could test some other features like line in etc.
If everything works fine, feel free to build an installer package. Until then install the kexts the ordinary way.
Credit goes to taruga and his awesome AppleHDApatcher
After having trouble uploading the compressed file as an attachment I decided to upload it somewhere else.
Here's the link: alc889a kexts
kossi
I am novice in MacOSX, and I am VERY glad to see that somebody was forced alc889a to work with full features! I have downloaded these kexts at mentioned url and after it I see that I am already used this files (installed them automatically using osx86tools). However, I got only one feature working: analog line out at the back of system case. My motherboard is Gigabyte GA-EP35C-DS3R. Im getting envy when I see screenshots with microphone input and spdif optical out enabled ;-). Can anyone be so kind to give advice what can I do to enable all features? Please, please!
QUOTE (ilia231184@gmail.com @ Jan 11 2009, 01:27 AM)
Hi everyone! I've been fighting with my P5K for 4 days and finaly I have the sound!!!! I have P5k vith ALC883 on ICH9. If anyone is needed in such dump.dat- Ican send via ICQ or email. My ICQ is 285 781 783. Wish u luck!!!
Hi , I have the same MB , installed os x 10.8.5 but without sound . Please post your solution here .....
anyone get shutdown issues? is it ok for me to 'hard off' my machine everytime? ie-am i just doing it for my os at the right time anyways?
QUOTE (Jib51 @ Jan 16 2009, 03:14 PM)
Hi !
I've got Xxx 10.5.6 installed, and ALC888Audio.mpkg installed too.
Sound is working great, but I can't get Line-in to work. I've tested all config (3 ports, 6 ports...).
Line-in is there, in Audio config, but no sound
Is there something to modify ?
Thx !
I've got Xxx 10.5.6 installed, and ALC888Audio.mpkg installed too.
Sound is working great, but I can't get Line-in to work. I've tested all config (3 ports, 6 ports...).
Line-in is there, in Audio config, but no sound
Is there something to modify ?
Thx !
i've got the same problem with ipc osx86 10.5.6 ppf5 and ALC 883 audio installed, working same way in the sound panel preferences but not ,in applications, looks like it can be record but not played output in live. I make a try in garage band and a guitar to record , it work on record but i cannot hear what i record. help reward thanks in advance to anyone.
Thanks for the great driver! Just installed 10.4.9 on a Dell Dimension 4700 with Sigmatel/AnalogDevices ADI-198x integrated audio and it works perfectly! Sounds comes out the line-out instead of speaker-out, but that's fine. And the microphone input even works, so I can use my headset.
Thanks again for the good work.
Thanks again for the good work.
EverY oNe is happy except the Intel alc888s ON ICH8 users..
Too bad Luck for us... Still No kext for us, Azailia seems Ok but not too good for good quality sound.. Hey any1 out there Got a working kext for ALC888s ON ICH8 With INTEL DG35EC.
Thank You!
Ganesh
iDeneb 1.3/iAktos 5i (10.5.5) (currently downloading 10.5.6)
Intel DG35EC
Intel e7200 @2.53 unknown
Ram 3GB @667Mhz
320GB HDD
Dual OS/ Vista/mac
Too bad Luck for us... Still No kext for us, Azailia seems Ok but not too good for good quality sound.. Hey any1 out there Got a working kext for ALC888s ON ICH8 With INTEL DG35EC.
Thank You!
Ganesh
iDeneb 1.3/iAktos 5i (10.5.5) (currently downloading 10.5.6)
Intel DG35EC
Intel e7200 @2.53 unknown
Ram 3GB @667Mhz
320GB HDD
Dual OS/ Vista/mac
Hi ganesh k
i'm working in this kext (AppleHDA.kext) for this mobo since Dec (last Dec) but not luck ...
If you have any information about it please report it at this forum (linux audio dump, graph, etc ...)
Actualy i have the correct info on the Sytem Profile/Audio & the correct connections on the preferences pannel/sound (Line in, Micro, Line Out, HP & SPDIF Out) ... but not sound at the moment.
The solution is here but .... more work is needeed ...
i'm working in this kext (AppleHDA.kext) for this mobo since Dec (last Dec) but not luck ...
If you have any information about it please report it at this forum (linux audio dump, graph, etc ...)
Actualy i have the correct info on the Sytem Profile/Audio & the correct connections on the preferences pannel/sound (Line in, Micro, Line Out, HP & SPDIF Out) ... but not sound at the moment.
The solution is here but .... more work is needeed ...
Ya! Sure Bro.... I'm Workin hard this mobo....ndon't forget pm me if u got it working....Thanxx
my os is leo for all. everything is working properly except my audio. my audio chipset is alc883. if any one have any other kext means help me. my email id: johnravi1988@gmail.comprocessor : pentium D
mother board: intel 945GCCR
audio chipset : alc 883
QUOTE (skippyretard @ Dec 22 2006, 04:28 AM)
OK, I have started a new thread so I can keep all my drivers together in one easy to find post. For a little background info on this project refer to THIS thread. I would also like to mention that this would not be possible without Semthex, Taruga, TheMax32000, Rene204 and the countless testers that have helped develop these kext!
Skippy
AzaliaAudio.pkg should give 2ch output on most High Def Audio chipsets (updated v1.1)
Click to view attachment
ALC883Audio.pkg includes kext's for ALC883 support on mobo's with 3ports, 3ports w/digital, 6ports and 6ports w/digital
Click to view attachment
ALC888Audio.pkg includes kext's for ALC888 support on mobo's with 3ports, 3ports w/digital, 6ports and 6ports w/digital
Click to view attachment
YOU MUST USE 8.8.1 OR NEWER KERNEL WITH ALC883AUDIO.PKG AND ALC888AUDIO.PKG
If you have 3 outputs working you can setup 5.1 using Audio MIDI Setup found in the /Applications/Utilities/ folder. On the menu bar select "Audio>Open Aggregate Device Editor". Click on the "+" square and it will add a new aggregate device. Now select "Use" next to each output you want to add(usually the first 3) and click "done". Change Default Output to the "Aggregate Device". Now select "Aggregate Device" in the Properties For: box and click on "Configure Speakers". Click "Multichannel" and select "5.1 Surround". When your done configuring your speakers the way you want them, make sure you click "Apply" before "Done". You should now have 5.1 surround sound working.
Skippy
AzaliaAudio.pkg should give 2ch output on most High Def Audio chipsets (updated v1.1)
Click to view attachment
ALC883Audio.pkg includes kext's for ALC883 support on mobo's with 3ports, 3ports w/digital, 6ports and 6ports w/digital
Click to view attachment
ALC888Audio.pkg includes kext's for ALC888 support on mobo's with 3ports, 3ports w/digital, 6ports and 6ports w/digital
Click to view attachment
YOU MUST USE 8.8.1 OR NEWER KERNEL WITH ALC883AUDIO.PKG AND ALC888AUDIO.PKG
If you have 3 outputs working you can setup 5.1 using Audio MIDI Setup found in the /Applications/Utilities/ folder. On the menu bar select "Audio>Open Aggregate Device Editor". Click on the "+" square and it will add a new aggregate device. Now select "Use" next to each output you want to add(usually the first 3) and click "done". Change Default Output to the "Aggregate Device". Now select "Aggregate Device" in the Properties For: box and click on "Configure Speakers". Click "Multichannel" and select "5.1 Surround". When your done configuring your speakers the way you want them, make sure you click "Apply" before "Done". You should now have 5.1 surround sound working.
If anyone has a Gigabyte GA-EP35-DS4 with ALC889a (which I believe is exactly the same as ALC888) with working SPDIFs can they let me know what method they used? I can get regular 2 channel analog audio but I'm trying to get as many as the audio inputs/outputs working as possible. I must have tried a dozen methods on various threads but this seems to be the one most users are having luck. So far I've tried the ALC888Audio.mpkg.zip with no luck. Then I tried adding ICH9 DevIDs to:
ALCInject.kext/Contents/Info.plist
AppleHDA.kext/Contents/Plugins/AppleHDAController.kext/Contents/Info.plist
Still no luck. Anyone?
ALCInject.kext/Contents/Info.plist
AppleHDA.kext/Contents/Plugins/AppleHDAController.kext/Contents/Info.plist
Still no luck. Anyone?
Whoowww.. I'm so happy my Audigy 2 ZS Gold modded with SPDIF-out perfectly! I don't now @#$#$# about OSX but now I'm willing to learn. Didn't want te use mac with onboard crappy soundcards.
Thanx bro
Thanx bro
Damned! How can I do a complete UNINSTALL of SkippR's 888 883? They black screened my machine, and I just need to uninstall it all. 
Thanks.
Thanks.
QUOTE (skippyretard @ Dec 22 2006, 04:28 AM)
OK, I have started a new thread so I can keep all my drivers together in one easy to find post. For a little background info on this project refer to THIS thread. I would also like to mention that this would not be possible without Semthex, Taruga, TheMax32000, Rene204 and the countless testers that have helped develop these kext!
Skippy
AzaliaAudio.pkg should give 2ch output on most High Def Audio chipsets (updated v1.1)
Click to view attachment
ALC883Audio.pkg includes kext's for ALC883 support on mobo's with 3ports, 3ports w/digital, 6ports and 6ports w/digital
Click to view attachment
ALC888Audio.pkg includes kext's for ALC888 support on mobo's with 3ports, 3ports w/digital, 6ports and 6ports w/digital
Click to view attachment
YOU MUST USE 8.8.1 OR NEWER KERNEL WITH ALC883AUDIO.PKG AND ALC888AUDIO.PKG
If you have 3 outputs working you can setup 5.1 using Audio MIDI Setup found in the /Applications/Utilities/ folder. On the menu bar select "Audio>Open Aggregate Device Editor". Click on the "+" square and it will add a new aggregate device. Now select "Use" next to each output you want to add(usually the first 3) and click "done". Change Default Output to the "Aggregate Device". Now select "Aggregate Device" in the Properties For: box and click on "Configure Speakers". Click "Multichannel" and select "5.1 Surround". When your done configuring your speakers the way you want them, make sure you click "Apply" before "Done". You should now have 5.1 surround sound working.
Skippy
AzaliaAudio.pkg should give 2ch output on most High Def Audio chipsets (updated v1.1)
Click to view attachment
ALC883Audio.pkg includes kext's for ALC883 support on mobo's with 3ports, 3ports w/digital, 6ports and 6ports w/digital
Click to view attachment
ALC888Audio.pkg includes kext's for ALC888 support on mobo's with 3ports, 3ports w/digital, 6ports and 6ports w/digital
Click to view attachment
YOU MUST USE 8.8.1 OR NEWER KERNEL WITH ALC883AUDIO.PKG AND ALC888AUDIO.PKG
If you have 3 outputs working you can setup 5.1 using Audio MIDI Setup found in the /Applications/Utilities/ folder. On the menu bar select "Audio>Open Aggregate Device Editor". Click on the "+" square and it will add a new aggregate device. Now select "Use" next to each output you want to add(usually the first 3) and click "done". Change Default Output to the "Aggregate Device". Now select "Aggregate Device" in the Properties For: box and click on "Configure Speakers". Click "Multichannel" and select "5.1 Surround". When your done configuring your speakers the way you want them, make sure you click "Apply" before "Done". You should now have 5.1 surround sound working.
Thank you very much. I've tried many other drivers but this is the first one that actually worked on my Compaq Presario C700T running OS X 10.5.2. I like the installer too. Great work!
Thanks
I just got a good install going last night on my GA-EP35-DS3L. Everything works EXCEPT audio.
I have the Realtek ALC888.
Any updates on which drivers I should use to get working audio?
I have the Realtek ALC888.
Any updates on which drivers I should use to get working audio?
QUOTE (Orionn @ Dec 22 2006, 01:41 PM)
Sorry for my poor english.. 
Hello friends. I am inexperienced in the subject. I have a card ALC883 but with AzaliaAudio.pkg.zip me it detects but i have no sound (i change the vendor realtek ID to 883)... and with anyone of the options of ALC883Audio.mpkg.zip make me a kernel panic at the boot. To somebody can happens me?
Generic Nootebook:::
- OS: Linux Ubuntu 6.10 + Mac OSx JaS Intel SSE3 10.4.7 + Jas Update 10.4.8 Kernel 8.4.1
- CPU: Intel Core Duo 1.66 GHz Working
- Chipset: Intel 945GM + ICH7-M FSB 533 / 667 Mhz Working
- Memory: 1024 Scan Working
- Wireless: Intel Mini-Card Wireless 3945 802.11b/g, a/b/g Not Working
- Audio: Realtek ALC883 0x10ec0883 With vendor Intel 0x27d8086 Not Working
- HD: SATA 80GB Fuyitsu Working
- Grafic Card: Nvidia Geforce 7600 GO 256 Mb DDR2. Working whit Beta Drivers
- Modem 56K v.92/v.90 Not Working
- Integrated Webcam 1.3M píxel Not Working
- 3 x USB 2.0 Working
- 1 x VGA para external monitor Working
- 1 x LAN Ethernet 8111B Gigabit 10/100/1000 Mb/s Working
- 1 x firewire mini IEEE1394 Working
- 1 x Multi-Card read 3-in-1 (SD/MMC/Memory Stick) Not Working
- 1 x S-video/TV-out port (NTSC/PAL) Not Working
- 1 x Digital fingerprints read Not Working
- PCMCIA Type II Working
- TV Mini Card with USB 2.0 Not Working
Hello friends. I am inexperienced in the subject. I have a card ALC883 but with AzaliaAudio.pkg.zip me it detects but i have no sound (i change the vendor realtek ID to 883)... and with anyone of the options of ALC883Audio.mpkg.zip make me a kernel panic at the boot. To somebody can happens me?
Generic Nootebook:::
- OS: Linux Ubuntu 6.10 + Mac OSx JaS Intel SSE3 10.4.7 + Jas Update 10.4.8 Kernel 8.4.1
- CPU: Intel Core Duo 1.66 GHz Working
- Chipset: Intel 945GM + ICH7-M FSB 533 / 667 Mhz Working
- Memory: 1024 Scan Working
- Wireless: Intel Mini-Card Wireless 3945 802.11b/g, a/b/g Not Working
- Audio: Realtek ALC883 0x10ec0883 With vendor Intel 0x27d8086 Not Working
- HD: SATA 80GB Fuyitsu Working
- Grafic Card: Nvidia Geforce 7600 GO 256 Mb DDR2. Working whit Beta Drivers
- Modem 56K v.92/v.90 Not Working
- Integrated Webcam 1.3M píxel Not Working
- 3 x USB 2.0 Working
- 1 x VGA para external monitor Working
- 1 x LAN Ethernet 8111B Gigabit 10/100/1000 Mb/s Working
- 1 x firewire mini IEEE1394 Working
- 1 x Multi-Card read 3-in-1 (SD/MMC/Memory Stick) Not Working
- 1 x S-video/TV-out port (NTSC/PAL) Not Working
- 1 x Digital fingerprints read Not Working
- PCMCIA Type II Working
- TV Mini Card with USB 2.0 Not Working
mac os x audio alc 883 working package i uploaded u can download it from my site
http://sites.google.com/site/rajeshmagics/
QUOTE (Orionn @ Dec 22 2006, 01:41 PM)
Sorry for my poor english..
Hello friends. I am inexperienced in the subject. I have a card ALC883 but with AzaliaAudio.pkg.zip me it detects but i have no sound (i change the vendor realtek ID to 883)... and with anyone of the options of ALC883Audio.mpkg.zip make me a kernel panic at the boot. To somebody can happens me?
Generic Nootebook:::
- OS: Linux Ubuntu 6.10 + Mac OSx JaS Intel SSE3 10.4.7 + Jas Update 10.4.8 Kernel 8.4.1
- CPU: Intel Core Duo 1.66 GHz Working
- Chipset: Intel 945GM + ICH7-M FSB 533 / 667 Mhz Working
- Memory: 1024 Scan Working
- Wireless: Intel Mini-Card Wireless 3945 802.11b/g, a/b/g Not Working
- Audio: Realtek ALC883 0x10ec0883 With vendor Intel 0x27d8086 Not Working
- HD: SATA 80GB Fuyitsu Working
- Grafic Card: Nvidia Geforce 7600 GO 256 Mb DDR2. Working whit Beta Drivers
- Modem 56K v.92/v.90 Not Working
- Integrated Webcam 1.3M píxel Not Working
- 3 x USB 2.0 Working
- 1 x VGA para external monitor Working
- 1 x LAN Ethernet 8111B Gigabit 10/100/1000 Mb/s Working
- 1 x firewire mini IEEE1394 Working
- 1 x Multi-Card read 3-in-1 (SD/MMC/Memory Stick) Not Working
- 1 x S-video/TV-out port (NTSC/PAL) Not Working
- 1 x Digital fingerprints read Not Working
- PCMCIA Type II Working
- TV Mini Card with USB 2.0 Not Working
Hello friends. I am inexperienced in the subject. I have a card ALC883 but with AzaliaAudio.pkg.zip me it detects but i have no sound (i change the vendor realtek ID to 883)... and with anyone of the options of ALC883Audio.mpkg.zip make me a kernel panic at the boot. To somebody can happens me?
Generic Nootebook:::
- OS: Linux Ubuntu 6.10 + Mac OSx JaS Intel SSE3 10.4.7 + Jas Update 10.4.8 Kernel 8.4.1
- CPU: Intel Core Duo 1.66 GHz Working
- Chipset: Intel 945GM + ICH7-M FSB 533 / 667 Mhz Working
- Memory: 1024 Scan Working
- Wireless: Intel Mini-Card Wireless 3945 802.11b/g, a/b/g Not Working
- Audio: Realtek ALC883 0x10ec0883 With vendor Intel 0x27d8086 Not Working
- HD: SATA 80GB Fuyitsu Working
- Grafic Card: Nvidia Geforce 7600 GO 256 Mb DDR2. Working whit Beta Drivers
- Modem 56K v.92/v.90 Not Working
- Integrated Webcam 1.3M píxel Not Working
- 3 x USB 2.0 Working
- 1 x VGA para external monitor Working
- 1 x LAN Ethernet 8111B Gigabit 10/100/1000 Mb/s Working
- 1 x firewire mini IEEE1394 Working
- 1 x Multi-Card read 3-in-1 (SD/MMC/Memory Stick) Not Working
- 1 x S-video/TV-out port (NTSC/PAL) Not Working
- 1 x Digital fingerprints read Not Working
- PCMCIA Type II Working
- TV Mini Card with USB 2.0 Not Working
for working alc 883audio
http://sites.google.com/site/rajeshmagics/
QUOTE (Orionn @ Dec 22 2006, 01:41 PM)
Sorry for my poor english..
Hello friends. I am inexperienced in the subject. I have a card ALC883 but with AzaliaAudio.pkg.zip me it detects but i have no sound (i change the vendor realtek ID to 883)... and with anyone of the options of ALC883Audio.mpkg.zip make me a kernel panic at the boot. To somebody can happens me?
Generic Nootebook:::
- OS: Linux Ubuntu 6.10 + Mac OSx JaS Intel SSE3 10.4.7 + Jas Update 10.4.8 Kernel 8.4.1
- CPU: Intel Core Duo 1.66 GHz Working
- Chipset: Intel 945GM + ICH7-M FSB 533 / 667 Mhz Working
- Memory: 1024 Scan Working
- Wireless: Intel Mini-Card Wireless 3945 802.11b/g, a/b/g Not Working
- Audio: Realtek ALC883 0x10ec0883 With vendor Intel 0x27d8086 Not Working
- HD: SATA 80GB Fuyitsu Working
- Grafic Card: Nvidia Geforce 7600 GO 256 Mb DDR2. Working whit Beta Drivers
- Modem 56K v.92/v.90 Not Working
- Integrated Webcam 1.3M píxel Not Working
- 3 x USB 2.0 Working
- 1 x VGA para external monitor Working
- 1 x LAN Ethernet 8111B Gigabit 10/100/1000 Mb/s Working
- 1 x firewire mini IEEE1394 Working
- 1 x Multi-Card read 3-in-1 (SD/MMC/Memory Stick) Not Working
- 1 x S-video/TV-out port (NTSC/PAL) Not Working
- 1 x Digital fingerprints read Not Working
- PCMCIA Type II Working
- TV Mini Card with USB 2.0 Not Working
Hello friends. I am inexperienced in the subject. I have a card ALC883 but with AzaliaAudio.pkg.zip me it detects but i have no sound (i change the vendor realtek ID to 883)... and with anyone of the options of ALC883Audio.mpkg.zip make me a kernel panic at the boot. To somebody can happens me?
Generic Nootebook:::
- OS: Linux Ubuntu 6.10 + Mac OSx JaS Intel SSE3 10.4.7 + Jas Update 10.4.8 Kernel 8.4.1
- CPU: Intel Core Duo 1.66 GHz Working
- Chipset: Intel 945GM + ICH7-M FSB 533 / 667 Mhz Working
- Memory: 1024 Scan Working
- Wireless: Intel Mini-Card Wireless 3945 802.11b/g, a/b/g Not Working
- Audio: Realtek ALC883 0x10ec0883 With vendor Intel 0x27d8086 Not Working
- HD: SATA 80GB Fuyitsu Working
- Grafic Card: Nvidia Geforce 7600 GO 256 Mb DDR2. Working whit Beta Drivers
- Modem 56K v.92/v.90 Not Working
- Integrated Webcam 1.3M píxel Not Working
- 3 x USB 2.0 Working
- 1 x VGA para external monitor Working
- 1 x LAN Ethernet 8111B Gigabit 10/100/1000 Mb/s Working
- 1 x firewire mini IEEE1394 Working
- 1 x Multi-Card read 3-in-1 (SD/MMC/Memory Stick) Not Working
- 1 x S-video/TV-out port (NTSC/PAL) Not Working
- 1 x Digital fingerprints read Not Working
- PCMCIA Type II Working
- TV Mini Card with USB 2.0 Not Working
for working alc 883audio
http://sites.google.com/site/rajeshmagics/
Hi,
I tried the AzaliaAudio.pkg and the built-in speakers are working well but I'd like to use my headphones too. And if my mic would work, everything will be perfect
.
So, I tried the ALC883Audio.pkg and the Problem is that just the headphone is shown as output and the built-in speaker and mic is shown as input, but none of them are working.
With rajeshmagics Realtek_ALC883_Audio.dmg I have the same result as with AzaliaAudio.pkg.
The last thing was the use of the driver in the osx86Tools from http://osx86driverdb.co.nr/ALC883.zip. Same result as with AzaliaAudio.pkg.
System-Profiler shows:
Intel High Definition Audio:
Device-ID: 0x14620579
Audio-ID: 12
I'm using the 10.5.6 Retail.
Is there any chance that all features of my soundcard are working?
Greets,
lny
I tried the AzaliaAudio.pkg and the built-in speakers are working well but I'd like to use my headphones too. And if my mic would work, everything will be perfect
.So, I tried the ALC883Audio.pkg and the Problem is that just the headphone is shown as output and the built-in speaker and mic is shown as input, but none of them are working.
With rajeshmagics Realtek_ALC883_Audio.dmg I have the same result as with AzaliaAudio.pkg.
The last thing was the use of the driver in the osx86Tools from http://osx86driverdb.co.nr/ALC883.zip. Same result as with AzaliaAudio.pkg.
System-Profiler shows:
Intel High Definition Audio:
Device-ID: 0x14620579
Audio-ID: 12
I'm using the 10.5.6 Retail.
Is there any chance that all features of my soundcard are working?
Greets,
lny
many thanks
No luck on my GA-P35-DS3L mobo. I have ALC888. I can't even get the devices to show up in the audio devices. Anyone have any ideas? Sorry I'm am very newbish.
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.