Thanks Skippy.

Just wanted to confirm that ALC888Audio.mpkg is working fine with Kalyway 10.5.2 instalation, on Gigabyte GA-M57SLI-S4 motherboard.

i have this driver, it works great, now i want to use it with amplitube, so my question is: what latency does it have? 7ms?

simon

oh my god it worked

but no mic input

Hi everyone, I have Leo 10.5.2 (Leo4Allv3) and ASUS P5K PRO mobo with ALC883 on-board audio, install a lot of drivers but didn't got the working sound

I got this with Taruga_AD1988b_rev3_Installer from http://wiki.taruga.net/tiki-index.php



but there is no any Input/Output ports in Sound option

Also Keyboard & Mouse preferences is missing

Hi I have the Realtec ALC880 onboard. Is this compatible with any of the others??

How do I install and uninstall if neccessary from within the leopard OSX.

thanks

Hey i need driver for my audio card, so you know im instaled Tiger 10.4.8 but not working my network car and install Leopard 10.5.2 But in the tiger my sound device Working

Hello People! I have a notebook with ALC883 Sound (Realtek ALC883 - Intel 82801HBM - ICH8M - High Definition Audio Controller) and I tried all the methods here. My sound works with alc883 3 outputs but i have a problem.... I have sound in Headphone (line Out), Speakers OK too, but tthe sound is mono in speakers and Headphone. The Left and Right channels play together at the center. I don't have any stereo separation. My microfone doesn't work too. I tried other methods: With digital, without digital, Azalia... all of them I have sound but the same problem. The diference is speaker. Line out (Phone) always works. Any solution?? Thx a lot

PS> Sorry, but my english is poor, I'm Brazilian.

Hello people! Thanks for the guide, but does not work to me. I have a laptop Acer Aspire 5040, with ALC883 Audio inside. The Vendor ID is "10ec" and the Device ID is " 0883. The HD vendor and device ar: " 1002" and " 437b".
I try all the combinations, all the metods, but i'm thinking i'm doing something wrong. Anyone here can help me? I use the AzaliaPKG, ALC883PKG, and nothings works. In my laptop, i can use the Ethernet, the Wireless Card and Mouse/Keyboard. The only thing is the sound (the video aren't in full screen, only 1024 x 768, when my resolution are 1280 x 800). If someone can help-me, thanks. And another question: wich package is the correct for my laptop? I have only 2 channels here, a MIC and a Speaker out in my laptopl. Model: Acer Aspire 5040. Thanks my friends!

Hello! Sorry for my bad English//..
I have audio card ALC889A. Does driver for this card exist? Hel me please!

My SG33G5 has the ALC888 and audio works without using these drivers. I was using Kalyway 10.5.2 and now 10.5.3 I was wondering if by using these drivers for the ALC888, you were able to get microphone in functionality? Thanks.

I just answered my own question. This does not work with my SG33G5 and Kalyway 10.5.3.

I'm running kalyway 10.5.2 I have a gigabyte ep35-ds4 everything works including sound but I get no mic in on front panel? is there a later driver for 889a that enables all I/Os?

thanks in advance

Great job!!!!!! it is working for me now

AzaliaAudio.pkg should give 2ch output on most High Def Audio chipsets (updated v1.1)
AzaliaAudio.pkg.zip ( 71.58K ) Number of downloads: 34957

my system is:Hardware Overview:

Model Name: Mac
Model Identifier: G31M-S2L
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 0
Total Number Of Cores: 1
L2 Cache: 1 MB
Memory: 2 GB
Bus Speed: 800 MHz

through it is showing No Built-in Audio. but system preference, sound icon it show HD audio output


after i learn how to do screen capture i can post the image

command shift 3 to save screen as a file in png


like to say a BIG thank you, and yes i do want a MAC more now.... i am really think of getting one

ALC888Audio installer above works on GigaByte DS4 motherboard.

THANKS!

\/\/...

Humm can't seem to get my ALC883 on my P5N-D to work properly, always have two channels.. have 10.5.3

Tried ALC883-3lines out with ALC inject kext and Apple HDA

I get a whole bunch of lineouts.. If I choose them one by one I can hear sound from each source speaker form my 5.1 but under Aggregate can't get them to work all at once, anyone have any ideas?

thanks for the installer man
it works

Does anyone know how I can uninstall this? Audio was working with 883 using the default kalyway 10.5.2 driver, but only with right-speaker audio. I installed this and the sound card dissapeared from the sound preference pane.

Help!

Edit: Managed to uninstall through liberal application of the Azelea driver, but I am still unable to hear the left channel :-)

Hi guys
I've read the hole "sound" and "applehda" thread. My MB is MSI P4M900 and in xp it says I've ALC883 and i've 6ports and I've tryied all the drivers and methods given in those threads and some of those driver works for me only 2ch(front 2) and finally managed to get 4 outputs and tryied the aggregative method for 5.1 surround sound bt only 2ch works in iTunes. But individually every ch works.

I ve seen a lot of people has the same problem. There is so many post abt this but no solution.
In vista we faced the same problem with realtek hd intrigrated sound. And we r adviced to use "speaker fill" option. But here on osx leo there is no option like speaker fill.

So anyone plz say something abt this prob.

Here is my pc configuration:

Intel Dual core 2gh
MSI P4M900M2
250gb Hitachi
40gb Maxtor
1gb RAM 667

If you have Kalyway 10.5.2 installed, sound driver will installed by default.
Manually install:
**Open http://wiki.taruga.net/tiki-index.php
**Find this link, and download it: v1.20 and HDA Patcher v1.20
**Drag alc883.txt to AppleHDAPatcherv1.20
**Restart

Hi!

I have this motherboard: Asrock conroe1333 GLAN with 945GC ALC888 ICH7

I tried this package, ALC888, but unfortunalty nothing sound card detected.

Have you already met this problem?

regards

I need help here...

I have installed 10.5.2, kalyway release - 9.2 speedstep kernel, and I tried the packeges posted here but they don't seem to work for me..

I have a Asrock ALiveNF7G-HDready, the chipset is the nForce 630A and the audio codek ALC888 7 channels.

All I get is "no built-in audio"..

Don't believe the System Profiler - Audio (Built In) - No Built-in Audio.

I have an ASUS P5K PRO and kept checking System Profiler as I tried many solutions thinking they were all not working.

But then something made me check the Output tab of the Sound System Preference just after trying HDA Patcher v1.20 and it listed Line Out, Headphones, and Digital Out. I tried Digital Out with my S/PDIF coax and it worked! Even though System Profiler still said No Built-in Audio. Headphones also worked. Have not tried Line Out.

So ignore System Profiler for Audio and check System Preferences - Sound.

P5K PRO has ALC883

Running 10.5.4 with the included 9.4.0 kernel. Sleep works nicely.

i bought the medion akoya mini (a version of the msi wind) in germany
ive installed mac os x garwin 10.5.2 and i need a driver for my soundcard Realtek ALC888/S/T @ Intel 82801GBM ICH7-M - High Definition Audio Controller [B-0]
can sb help me??

Worked great for M61P-S3 Motherboard Built in sound card used

AzaliaAudio.pkg should give 2ch output on most High Def Audio chipsets (updated v1.1)
Attached File AzaliaAudio.pkg.zip ( 71.58K ) Number of downloads: 37131

Thank you again!! now i just need to figure out how to get the wireless to work

Reporting a stunning LACK of success on my Gigabyte GA-965P-DS3 with ALC883.

I had sound OOB from the install, but it was only through one jack, and I had no audio input, line out, or 5.1 possibility. I tried installing every one of the drivers included in the ALC88XX.mpkg, and they all got me the same thing - no sound at all. I finally restored my kexts from backup, so at least I'm functional again. Through all of this System Profiler has insisted that I have no built-in audio devices, though that may be normal.

I figure it must be a kernel version issue, since this thread seems to indicate I should have 8.8, and I have 9.4.0. Any ideas?

i used ALC888 package on acer 5920g laptop.sound is ok but only line out and i want to hear sound internal speakers too.if it is not possible i prefer to choice hear sound internal speaker only.just i don't know how to.

Ok I have performed a clean install of Kalyway 10.5.2 and installing the AzaliaAudio found on the Dvd I could get 2ch output working even if my soundcard does not show in the system profiler.
Installing the kexts found here, or using the HDAPatcher don't work for me.

Is there anybody who got mic and/or more than 2ch working?

thank you very much, this works fine for my realtek ACL883 soundcard

Please I need a driver for Sigmatel 9200
I can't understand the AppleHDA things and all that just give me somthing simple that any idiot can understand!

AA!! I need help!! I've NO sound, but driver was installed "successfully"!!=(( /*ALC888 on ASRock ConroeXFire-eSata2*/

yeaaaaaaaaaaah!!!! I'm listening MUSIC!!! HEY_HEY%))


thank to http://forum.insanelymac.com/index.php?s=&...st&p=635214

like MALTE111, i have a MSI Wind and the driver doesn't work

any issue ? new dev ?

thanks

Alex

Hi All, am in the same boat as well...i got MSI Wind which almost similar to Medion (except for the wireless card) with Realtek ALC888/S/T @ Intel 82801GBM ICH7-M. Tried all the drivers and ways posted in this thread, no workie...currently using Kalyway, upgraded to 10.5.4 - with patched Azalia that only provides sound from speaker, the rest is not working, built-in mic, line-out and mic-in

Need someone kind enough to patch it for us? thanks in-advance.

I use Asus p5gc mobo. ‘Azalia out’ works fine only for output. Mic, line in or midi input dose not work. I am looking for appropriate driver. I tried Azalia pkg, no result. My friend uses Asus ‘Maximus’ mobo, he got both audio in and out.

Hi

I have Msi K9N Neo V3 with realtek alc888,

other components is working good but i have problem with this sound card.

I downloaded and instaled alc888 drivers but it is only playing sound in stereo 

i cann't change it to 5.1 .

Does anyone knows how to fix this

Instaled os is Mac OS X 10.5.2 Leopard Kalyway

im trying install the "AzaliaAudio.pkg"-File.
During the install appeares: Please insert the "AzaliaAudio.pkg" disc to Continue installation.
"You have chosen to install software that requires this disc" ?!

What do i have to do ?

EDIT:

Copy the file to HDD --> i tried the install from the USB-Stick !

Hi, i have ALC883 and cant make it work.
With 6+digital it dont displays any devices at all with all other line out works but it gives very low sound - with headphones i can barely hear and master volume is grayed out. Im attaching my codec dump from linux, if anyone could help i would be rly grateful

In windows it says:
RealteckHD
vendor: 10EC
device: 0883
0x10EC0883

Microsoft UAA
vendor: 8086
device: 27D8
0x27D88086

Help with audio!!! i've installed kalyway 10.5.2 and the stereo out works..i've installed the 10.5.3 combo updt and no audio device was found..i tried with pacifist to recover the pkg from the audio driver of the kalyway dvd but no sound!!!!
any idea?where i can find a driver audio pkg that work?!?

Do you work in 10.5.4 iKatos ? if yes, please show me how to make it work, i'm using ALC880 too

After Installing The Azalia Driver , It Shows in the Sound preferences , but the output is HD Audio Output , and I dont have any sound, My computer is still muet , I dont know why , should I change anything in the Kext , I have an IBM thinkpad R61i .
Any Advice ???
thank you guys .

you can look at the attachement .

Same with my Sigmatel 82801g...

i have an msi board and ac97 audio built in but i can't get it to work
i download some kext which sounded in no sound before it only one of my sound channels was working that is the left one with extremely horrible sound

can anyone tell me which driver to use and how to use??

Hi,

Tried ALC888 and Azalia on Gigabyte ga-p35-ds3l - didn't work. Both installed and asked for restart, but there is "no audio device found".

Would like some insight please.

gracias nos ayudan mucho a los hackintosheros jejeje xD saludos bye..

Anyone got a solution for the ALC889 ??

It shows: HD Audio Output

But there is NO sound

Hi,

is there some possibility to make alc889a work on 10.5.4 with Dolby Digital 5.1 or DTS sound through optical output????
I have now "HD Audio Output" but only with 2ch sound!!!!!! Interesting is PLEX can swith to Dolby Digital and DTS, but only Plex. When i try to play the same file in QT or VLC, there is only 2CH output!!!!!!

Thanks a lot community!!!!

Hi,

after updating from 10.5.4 to 10.5.5 I don't have sound anymore.

Have a retail install with boot-132 and aalc889a.zip from kossi

please help!

PS: have G33M-DS2R

Working now.

Thanks allot works great!

Today installed iDened 1.3 /OS 10.5/ NO sound - instaled drives from the first post in that thread- IT IS A MAGIC- WORKS

I'm using alc888 with my shuttle SG33g5. Works well, with one small problem. When video changes on screen there's a faint audible clicking. When I scroll web pages it does a little high pitched brrrrrrrr....

Anyone else have this problem?