Hello,

after some days of work, I got the adi ad 2000b audio codec (it is the same as ad1989b) to run.

Thanks goes to taruga, who made the ad1988b installer. I modified it and with luck now we have a solution for ad2000b

This is for asus p5q deluxe and some other asus boards (ASUS P5Q3, ASUS M3A79-T Deluxe, P6T Deluxe, ASUS Maximus II Formula, and more)
Please download the applehda.kext here:

http://www.mediafire.com/download.php?vmndmzni5z4


Install with kexthelper on your system, link:

http://www.mediafire.com/download.php?jzngetntjyj

Don´t forget to erase appleazalia.kext from the extensions folder, if you had the azalia solution before. You don´t need a seperate hdaenabler.kext, it is now in the plugin folder of applehda.kext

I hope you have a running ad 2000b with:

-Internal Microphone in

-Line out

-Headphones out

-Digital out


The kext was tested on an asus p5q deluxe board with vanilla 10.5.6 system, sleep mode works, shutdown works too.



Maybe some day we have more inputs (digital in, line in) but I´m happy that we now have an applehda solution, which is working perfectly from a boot 132 stick (tested)

or with chameleon method. Please post your results..

Greetings,

Gary


PS: in the next days I will post the legacy kexts for ad 2000b and maybe there is somebody, who can make a installer for it..

Download Alternative:

Great gary88, fantastic work!!!
I will try your solution and post my result!
bye

Ok, the kext works fine on p5q deluxe.

-Internal Microphone in

-Line out

-Headphones out

-Digital out

Thank Gary!!!

The download server seems to be down. I will try it later.

Hey,

I have a M3A79-T Deluxe motherboard w/ ad2000b audio and i haven't been able to get this to work... any suggestions? I used the kexthelper and it rebooted properly... no error messages, just no sound. There are no devices found in the system manager under the sound "out-put" and "in-put" tabs.

Before trying this "applehda" kext I used the "Taruga Ad1988b rev3" kext... and i am not sure on how to go about deleting this

any help would be greatly appreciated!

Thanks.

Hello,
I would try to delete the applehda.kext in your extensions folder
then you should look if there is an hdaenabler.kext in your extensions folder, if you find it just delete it too,

at last I would look for alcinject.kext, and appleazalia.kext This must be deleted too.

Now where everything is clean you install the applehda.kext from me again. you can repair userrights..it should work now

Much luck,

Bye !

Gary

Hey Gary,

thanks for the quick reply!

I searched through the extensions folder a few times now and the only kext I found was the "applehda"

No alcinject - appleazalia - or hdaenabler...

I did find AppleFWaudio - apple02audio - AppleOnBoardAudio - AppleUSBAudio - AudioDeviceTreeUpdater - AudioIPCDriver - VirtualAudioDriver

I know for a fact that i installed the ad1988b kext but i can't find it anywhere... is there any other place it could be besides the extension folder?

Thanks again!

No, I think not, your old 1988b kext is in a patch in your "old" applehda.kext

But one thing I forgot....In your System/Library/ is a file called "Extensions.mkext" You should erase this file, it maybe
the reason why your new applehda.kext did not load correctly..

Have a look at your system profiler-what can you see under "Audio" ?

Much luck again !

Greetings,

Gary

Hey,

I uninstalled the AppleaHDA and reinstalled it once again and I got it to work this time!

Guess I just made a silly mistake...

Thanks again for all the help, I really appreciate it!

Take care

hi gary..

it works..

only internal microphone "the selected device has no input controls"

is this for rear microphone or front panel microphone?

do i have to plugin the microphone first?

same for digital out, "the selected device has no input controls" too. Is this normal? coz i only use 2.1 speakers plug into green line-out

good job..

ps : mb is maximus ii formula

Hi cipz ,

yes this is normal, it´s not so easy to get this controls to work. Maybe I can work on it in the next weeks, legacy driver are a problem too,

cause the ad2000 driver doesn´t work with fake plists- but we will see....thing are going further !

Bye,

Gary

thanks Gary88,
here is a p5q-e mobo and the driver works perfectly.

Hi, thanks, this works here too (p5q deluxe) but it causes a kernel panic on shutdown. I tried to reinstall iPC 10.5.6 from scratch and shutdown works fine until I install this kext.

Here is the installer for your ADI AD2000b.

Hi Lugmor, thank you very much for the installer..great work !

I try to get the legacy kexts of ad2000b to work, but with no success yet.
The problem is that "applehda" binaries are patched, not only the plists. But I´m working on it .


Best !

Gary

go for it gary!

Hey Gary,

I decided to upgrade to 10.5.6 the other day and the update went perfectly, but i lost my audio

I used the voodoo kernal with seatbelt fix if this matters...

I have cleaned up my extensions folder and reinstalled "hdaenabler" and "applehda"

In my system contents under audio I can see the following...

"Intel High Definition Audio:
Device ID: 0x10438288
Audio ID: 12
Available Devices: "

But under system management/sound no "output" or "input" devices are shown...

I have also tried to use the installer and it locks up on me after i press "continue" on the first page.

I would be grateful for any help!

Thanks!

Hi Thomas,
just delete hdaenabler, you don´t need it. it is in the applehda plugin folder, maybe this is the reason,
an there should be no appleazalia.kext in your extensions folder...Good luck,
if this don´t work, delete the original applehda from extensionsfolder, and then reinstall with the ad2000b installer..

Gary !

Hi, i have the same problem as thomas, and the same config... what system do you have gary? 10.5.5, 10.5.6? what kernel are you running?

I installed retail 10.5.6 with PCEFI v9 on my P5Q Deluxe and the problem remains: kernel panic on shutdown after installing the kext (AppleHDAController corrupted the registry etc.). Did you install any particular fix or patch?

Hi M.J I have two systems, the first is a retail 10.5.6 with boot 132 method, and the second is a patched 10.5.6 on kalywell basis.

Both systems are running without problems, I have no shutdown issue, maybe it is a bios configuration problem, I don´t know,

the only issue I have is that I can´t boot the applehda.kext from usb stick...

Greetings !

Gary

Hi Gary,
did you put the kext in the boot 132 disc or in the system folder? Do you have any other audio-related kext in the disc? Are you running vanilla kernel?

Trying to understand why we get different results... Also, what does your System Profiler tell you about audio?

Thanks!

Hi the applehda.kext must be installed in the Sytem/Library/Extensions of your system, not in the boot 132 disk!

I have no other audio related kexts in the extensions folder no azalia, no hdaenabler (cause it is integrated in the applehda.kext

I´m running a vanilla kernel system 10.5.6

System Profiler shows:
Intel High Definition Audio:

Device ID: 0x10438311
Audio ID: 12
Available Devices:
Headphone:
Connection: 1/8 inch Jack
Line Out:
Connection: 1/8 inch Jack
S/P-DIF Out:
Connection: Optical
Microphone:
Connection: 1/8 inch Jack

Bye !

Gary

That's probably it! Will try it tomorrow...

Hi sorry to bump this thread, but I'm also having the issue of AppleHDA causing a kernel panic when rebooting or shutting down. Is there a fix for this yet?

For stopping a kernel panic on restart, use OpenHaltRestart.kext from the psystar site. Shutdown kernel panics I still don't know how to fix, I'm having the same problem.

post a screenshot of the KP so we/somebody can help you

A driver releasing AppleHDAController has corrupted the registry blah blah blah

BSD process responding to current thread kernel_task.

Motherboard M3A79-T Voodoo kernel iDeneb 10.5.4


Sorry about the bad image quality, there were no lights on in the room.

Hi Gary!

THanks for your great work and taruga's!!

I have maximus II formula with AD2000B and tried your applehda.kext yesterday and had bad luck unfortunately I have used AppleAzaliaAudio.kext before and had HD output sound only.

Well your kext works great but half way though and I can't use mute anymore and I hope you can help me out with these issue I have posted on a screenshot.

I have erase appleazalia.kext and evan the orginal applehda.kext and installed yours but unfortunately no mic works and no mute I had mute before along with appleazalia.kext..

http://img13.imageshack.us/my.php?image=ad2000bproblems.png


my system is 10.5.6 vanilla 9.6

Looking forward for legacy kext or any solution for my issue dude..

Thanks!

I noticed a very strange thing in system profiler: I have two audio devices when I install the kext, and none when it's not installed (however, audio works):
Image 1
Image 2
Could this be the cause of the kernel panic?

No, it is not a kernel panic, but my PC shows both of those options I'm not sure why.

Any one else getting kextd crashes on startup with this kext? (Running on chameleon going to test Boot 1-3-2)

Gary, great work! I installed it in the system folder and it worked. It's great to have both front panel headphones out AND back panel line out, and being able to switch between the two from the system preferences!

I experience a kernel panic every time I shutdown the computer IF I have previously put it in STOP. I think these kind of KPshave to do with the voodoo kernel, do you think you could look for a solution?

Click to view attachment

My kernel panic is the same as Marc below. It says that "a driver releasing a(n) AppleHDAController has corrupted the registry \n"@/SourceCache/xnu/xnu-1228.9.59/libkern/C++/OSobject.cpp:241"

I don't know if that helps diagnose why the kext is causing the panic or not, but I would really appreciate a solution if someone could work one out. I was until now using a modified AppleAzalia but had other problems with that, so switched to AppleHDA but now get the kernel panic when shutting down.

So do the front panel ports work as well on the p5q deluxe (hdaudio connected not ac97) ? I haven't installed osx yet waiting for 10.5.7 since it will support my ati 4850hd flawlessly

Yes, front panel audio should work.

ok i installed osx retail 10.5.6 and the audio works from the front panel but not the back. also i am getting kernel panics any solution for this?

Click to view attachment

works perfectly on p5q3 deluxe, ipc 10.5.6 ppf5.

thanks!

@Gary88 since your also using the ASUS p5Q deluxe can you post which BIOS version your using and the settings?

I installed 2001 modified and have a Q6600 core 2 duo with 4GB DDR2 RAM.

Installed 10.5.6 retail following instructions on this thread:
MAC OS X Retail on ASUS P5Q / P5Q PRO /P5Q-EM /P5Q-VM AND OTHERS

Sorry, just gotta bump this again. Any solutions being working on for the kernel panics on shutdown? I really don't wanna have to go back to Azalia with no digital out or microphone.

lol i'm waiting for the same thing...hopefully something comes along soon..this is great progress though considering that everything works other than the kernel panic.

QFT.

ok till this is resolved can someone link me to the older ktext which enables just the line out for audio? I don't really need to use a mic or digital out for now so I think I can live with just my speakers working.

Here is the Azalia kext from another thread which works for 2 speaker line-out only: http://www.insanelymac.com/forum/index.php...st&id=31521

thanks so I delete applehda.ktext and then install this?

Yep. That's the only other solution right now that works. If you don't need digital out/Mic, it works fine

Thanks for the AppleHDA.kext!

Works fine so far on Asus P5Q-E. I haven't tested all I/O yet.

Does anyone have this successfully loading from Extra/Extensions?
If so please let me know how you did it.

/EDIT

Here's an alternative:
http://www.insanelymac.com/forum/index.php...t&p=1106377

Should work from the extras folder.

Can someone help me, I tried using the solution found here, but I can't seem to get the sound to work on my Intel i7 920 - Asus P6T (none deluxe edition) to work. It's using a Realtek ALC1200. Any suggestions guys??

This thread is about the Analog Devices AD2000B.

I typed ALC1200 for you in the search box and look what I got:
http://www.insanelymac.com/search.php?cx=0...;q=ALC1200#1047