hi does any body knows how to make this work

00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)

i dont know what codec or version to look for, ive tried azalia pkg, patcher + ALC888
but cant make it work, any advise or help you could provide is very welcome

thanks in advance.

here is the entire lspci file:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07)
00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a43] (rev 07)
00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03)
00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03)
00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03)
00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03)
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03)
00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93)
00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M LPC Interface Controller [8086:2919] (rev 03)
00:1f.2 SATA controller [0106]: Intel Corporation ICH9M/M-E SATA AHCI Controller [8086:2929] (rev 03)
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03)
00:1f.6 Signal processing controller [1180]: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem [8086:2932] (rev 03)
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02)
02:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter [168c:001c] (rev 01)

from vista device manager

Conexant High Definition SmartAudio 221

HDAUDIO\FUNC_01&VEN_14F1&DEV_5051&SUBSYS_103C360B
vendor=14F1
device=5051

High Definition Audio Controller

PCI\VEN_8086&DEV_293E&SUBSYS_360B103C&REV_03
vendor=8086
device=293E

so it looks like it's a conexant not intel, i'll keep reading/searchig

i have this info i got from everest on win vista

Cx20561 @ Intel 82801IB ICH9 - High Definition Audio Controller PCI
Intel Unknown @ Intel 82801IB ICH9 - High Definition Audio Controller PCI
Codec Conexant Cx20561
Id 14F15051h / 103C360Bh

Codec Intel Unknown
Id 80862802h / 80860101h


ive searched this codec name Conexant Cx20561 but only found someone who had this same codec in ICH8, im trying to contact him to see if he can send me his kext and try to modify that

i got it to work
using azalia audio package, just edited the AppleAzaliaAudio kext plist using Property List Editor
uploading the azalia package and the modified kext

Hi, I've the same audio device from lspci.txt report: I tried to install your's Azalia Kext modified with Kext Helper, used Disk Utilty for repair permission and actually the Info system from Apple menu don't see the device BUT I see the volume on the screen, in system configuration I see the slide volume but no sound.
Thank'you for your help.

please check on device manager if you have same vendor y device id's
i installed the modified kext using pcwiz's osx86 tools (had it installed with ideneb 1.3) link

and booted with -f option on next restart

i havent tested mic nor headphones as i dont have one here

attached pictures of device manager properties

I'm going to install Vista(!) and check id vendor and device.
Thank's.

Ok, not a real problem but probably I'm doing wrong...I tried to restart with -f option and the wifi start! I'm tring to activate it with the same method of sound decvice (id device etc.) but nothing was going well. Actually the wifi is good, not is very good stuff!
So what mean the -f option on restart?
Thank's.

Hi. I have try this driver and run ok, but my PC have two outputs. The back line-output and front headphones output. The back line-output run ok, but headphones not run.

Have you any idea how resolve it?

Thx!

Driver for Conexant Cx20561
All the works except the sound of an external microphone. In progress. Remove Azalia and ALCInject.
Click to view attachment

Hi.

Thx for your help. I download it and install, but no run ok.

Click to view attachment

Click to view attachment

I have removed Azalia and ALCInject and restart.

What I need do more?

Thx a lot!

You are my hero ! Work fine on HP V3706 except internal mic !!! almost perfect !

THANKS !!!

Which vendor ID of your device HD Audio Controller (Look OSX86Tools or regedit Windows)? It must be set key IOPCIPrimaryMatch in the AppleHDAController.kext

Sorry for my English, I am Russian
PS And restart with the key -v -f

Thanks Podlovka!

I detect my Vendor Id

Click to view attachment

It's 0x80862445.

I have put dis ID in IOPCIPrimaryMatch.

Click to view attachment

Then I have repared extension permissions and cleared extension cache, and I have restart computer but I don't have audio.

I need do any more? Add EFI string? Delete others Extensions?

Thx very much!

You Vendor ID 0x24458086

Same problem...

I have change the vendor Id for 0x24458086. But nothing... not work it...

Thx.

You CodecID 0x505114F1 (looking post #2 & #6)?

This is all audio details:

Audio card:
Click to view attachment

Hardware Id:
Click to view attachment

Device Instance:
Click to view attachment

Thx!

[quote name='Noveo' post='1043453' date='Jan 16 2009, 04:12 PM']This is all audio details:



No! This data controllers, you need data on the codec.
Driver change to the codec 14F15051 (chip Conexant Cx20561)
You can try, under any, but you need to sound dump Linux and the Pin config Windows Vista
Look http://forum.insanelymac.com/index.php?showtopic=137188 and
http://forum.insanelymac.com/index.php?showtopic=127227

Ok. Thank you very much. I will try it and post it in here if I find a solutions.

i notice that when i boot up there is no sound on internal speaker until i plug and unplug the headphone !

HOW to solve this problem ??

Has noticed this bug as it seems to me, this problem arises because of an inexact PIN-card if to remove the keys which are responsible for linear exits - a bug vanishes.
Take advantage here of it. Click to view attachment (Work - a digital output, the built in loudspeakers, the ear-phones (auto detection), the built in microphone. Does not work - a connected microphone, at inclusion of a digital input there is an error with auto detection of ear-phones - the built in loudspeakers.)
The main thing - I cannot achieve working capacity of a connected microphone!
Work proceeds

ok, first or all......DAMMMMMM nice work!! i installed the first kexts and i got this


i was having this same problem so install those new kext and now i dont have the line in!! it only show internal mic, by the way its my external mic and its working...

i really need the line in! because i work on garageband can you fix it?

another problem is when i plug the headphone and shutdown the mac , it doesn't cut the power off !

The device has added, but it is displayed in the tab "Input" as "Linear exit". Working capacity of the device I can not check up. I ask to inform.
Click to view attachment



Such problem, but only with the switched off power adapter is noticed, i.e. at a food from the battery. It is not critical yet, I will be engaged in the decision after full start of a sound.

Just want to say Thnx man for the first working Driver for me, Azalia was for a half Year the only working driver for me, but now InternalSP/Headph/InternalMix/DigitalOut/Autoswitching works.

woooooooooooooww perfect man, thanks, now the only problem is the shoutdown thing because i use external speakers through the headphones out

excelent work!

With last driver the shoutdown problem was gone.
How at you?

which version ?

i didnt notice because iwas turning off the ac before shutdown.....yeah! the problem is gone!

thanks its fully working for me!!

Podkovka hi and thank you for ur work on applehda. i worked on applehda before and all i got the light on my mute turned red and that's all. but now with your applehda it works.

but i have problems. first thing is my Pinconfigurtation numbers look a little bit different than yours here it is.

<01671c30 01671d40 01671e21 01671f01 01771c20 01771d90 01771ea1 01771f01 01871cf0
01871d01 01871e00 01871f40 01971cf0 01971d01 01971e00 01971f40 01a71c10 01a71d01
01a71e17 01a71f92 01b71cf0 01b71d01 01b71e00 01b71f40 01c71cf0 01c71d01 01c71e00
01c71f40 01d71cf0 01d71d01 01d71e00 01d71f40>

second is, i get sound and the headphone works . and the internal and external microphone are recognized but the microphones don't work properly .when i record sound they record a beep sound only . like they don't pick up any sound only beep.

third is my mute don't work.


this is what i did. i put my pinconfiguration numbers inside applehdacontroller but my mic didn't work and the mute didn't work . and my mic is not recognized as external microphone and internal built in microphone anymore it's recognized as LineOut both of them.

i tried to play with the layout and pathmap .but i wasn't successful. because i don't know where you got the numbers inside the layout-filter 0 1 2 3 4 5 6 7 8 9 . like for example where did u get the numbers for gain or frequancy or Q. could u please post ur codec or let me know how to change those numbers or where and how to find them from my codec.

sorry for the long letter . but if u can help me with this it will be great thank you for ur work again.

here is my codec dump from linux

and my codec dump converted all hex to dec.

Unfortunately, but having replaced the laptop, I cannot continue work on a sound. I did not manage to solve a problem of simultaneous work of the built in microphone and external. I spread last version in which the built in microphone does not work, but the external works. Probably who that can finish work.
Only ExtMiсClick to view attachment
Only IntMiсClick to view attachment
Successes!

thanks Podkovka , the applehdaintermic.kext made my internal mic work. but my question was about the filters inside extmic and mic . what do they repersent . and where did u get the data for these filters from. how do u get them from pinconfig or from vista. or they are just inside source layouts and ur trying them out.

and why do u think mute is not working . and was mute working for u?

i don't really know know much . but now i think it's how u set the pathmap . if the pathmap is set right than more devices and more things will work. thank you again.

here's a pinconfig from a hp 6700 with a amd processor - they all look similiar

Vendor Id: 0x14f15051
Subsystem Id: 0x103c30cf

01671C30 01671D10 01671E21 01671F02
01771C20 01771D90 01771EA1 01771F02
01871CF0 01871D01 01871E00 01871F40
01971CF0 01971D01 01971E00 01971F40
01A71C10 01A71D01 01A71E17 01A71F95
01B71CF0 01B71D01 01B71E00 01B71F40
01C71CF0 01C71D11 01C71E45 01C71F22
01D71CF0 01D71D01 01D71E00 01D71F40

notice the 3rd column - the last 00 means that the Default Device / Connection Type is undefined
this means unless this is fixed mac os will fail to detect the correct devices
this can be ignored if the info.plist for the AppleHDAController is correct

i'd like to start porting this device using AppleHDA version 1.5.7 (mac os 10.5.5) based on Podkovka changes.
anyone to help?

yes jalavoui i removed the pinconfig from applehdacontroller.kext info.plist . and it had no affect to the speakers and headphone or internal mic . they all work fine without pingconfig.

so as u say it doesn't matter if the info.plist is correct inside applehda.kext.

but i'd like to report something strange. my built In Mic works properly but i have no external mic device detected . that is because i'm using padkovka's applehda.kext internal mic, and he has the external mic removed from the pathmap.

but the strange thing when i plugin External Mic it does mute the Internal Mic but it doesn't work. and i tried to plugin the headphone inside the External Mic jack. and it worked. i recorded sound and it worked.

So External Mic works If i plug headphone in External Mic jack, it works perfect . but the device stays as internal Mic it doesn't change to external Mic like it does with Internal speakers changing to headphone when headphone is plugged in.

Note: this strange thing happened even when i put my pinconfigs . pingconfigs don't do anything.

lastely mute does't work and i tried changing manythings , but it didn't work.

PinGonfig, added in AppleHDAController, influences only information display in properties of system.
A problem in that, as the built in microphone and external work on one NodeID, built in - 20, 29 and external 20, 23. I where could not find switching system in this case. It seems to me that additional keys (for example VREF or others) should be used.
As at me already is not present Toshiba the laptop, I cannot continue work.
On other laptop at me different NodeID on the built in microphone and external, but connection auto detection does not work, I switch manually. In Your case it is necessary to try to force to work devices simultaneously.

I have installed your kext, and it works for me. But I have a problem with Power off when in "shudown" the Laptop. No Power off. Its only if I install this AppleHDA.kext

Try to remove caches, repair permissions, correct access rights and reboot -v -f

Podkovka

can you explain how did you patch AppleHDA.kext

i'm trying to patch (find the right codec) in 10.5.5 and it doesn't seem to work

thanks

ya i did a lot of attempts to get the external mic work correct but still when i put headphone in mic jack it works as a mic but when i put mic inside exter mic jack it doesn't work. and i tried many things to get mute working . i did not succeed.

i used 3 different applhda.kext . i used the one they use for IDT and i used the one for ALC . and i used different layout settings . and these layouts setting look different in each applehda . so i used different layouts and they all work as long as the pathmap is correct.

i don't know what else i can use inside pathmap for me to get a different result .

i put the node numbers togather 20 23 and 29 at the end . and the ext mic work . but still same behavior. some help wiuld be appreciated thanks.

http://www.insanelymac.com/forum/index.php?showtopic=127227

i already read the threads related with applehda - i just can't make it work with the 10.5.5 version
maybe the codec in 10.5.5 don't work or (most likely) i'm making the info.plist entries wrong

to make this work you need to
1) hack applehda with hexedit and replace the codec id
2) get pinconfig from xp/vista
4) get linux dump and find the connections (doesn't work for me)
3) edit the info.plist files

here's what i like to do:
1) find a way to get the codec for the card (windows, linux) and inject the codec in applehda - this will work for all cards
2) make a script for reading pinconfig / linux dump and extract the connections
3) add pinconfig and connections to info.plist files

do you think this can be done?

jalavoui, did you find solution for the newer HDA kext?

Thanks everyone, I got my conexant cx20561 working with output on speakers and headphone. Also got my headphone mic and internal mic working. I got Hp 2839tx model. The only problem left is cant use mute and doent shutdown properly.


Regards
Kuber

Any progessing ?

How can i solve the shutdown problem ! i try clean the system cache and fix the permission but still no luck !

Any Help ?

Hey There !!

Someone make it worked on CX20551 waikiki ?
If not, is there a way to make a kext for it?

thx in advance

Hi temolesto i have the same problem of Noveo

here is my codec dump
Codec: Conexant CX20549 (Venice)
Address: 0
Vendor Id: 0x14f15045
Subsystem Id: 0x103c30d9
Revision Id: 0x100100
Modem Function Group: 0x2
Default PCM:
rates [0x140]: 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x10 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x2b, nsteps=0x2b, stepsize=0x05, mute=1
Amp-Out vals: [0x9f 0x9f]
Pincap 0x00010014: OUT EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x95170110: [Fixed] Speaker at Int Top
Conn = Analog, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 2
0x19 0x17*
Node 0x11 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x2b, nsteps=0x2b, stepsize=0x05, mute=1
Amp-Out vals: [0x1f 0x1f]
Pincap 0x0000113c: IN OUT HP Detect
Vref caps: HIZ 80
Pin Default 0x0221101f: [Jack] HP Out at Ext Front
Conn = 1/8, Color = Black
DefAssociation = 0x1, Sequence = 0xf
Pin-ctls: 0xc0: OUT HP VREF_HIZ
Unsolicited: tag=37, enabled=1
Power: setting=D0, actual=D0
Connection: 2
0x19 0x17*
Node 0x12 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x2b, nsteps=0x2b, stepsize=0x05, mute=1
Amp-Out vals: [0xab 0xab]
Pincap 0x0000113c: IN OUT HP Detect
Vref caps: HIZ 80
Pin Default 0x02a11020: [Jack] Mic at Ext Front
Conn = 1/8, Color = Black
DefAssociation = 0x2, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 2
0x19* 0x17
Node 0x13 [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x00000010: OUT
Pin Default 0x400001f0: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Connection: 1
0x18
Node 0x14 [Pin Complex] wcaps 0x400081: Stereo
Pincap 0x00001124: IN Detect
Vref caps: HIZ 80
Pin Default 0x97a7012e: [Fixed] Mic at Int Riser
Conn = Analog, Color = Unknown
DefAssociation = 0x2, Sequence = 0xe
Misc = NO_PRESENCE
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Node 0x15 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x00000020: IN
Pin Default 0x400001f0: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Node 0x16 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Amp-Out caps: ofs=0x07, nsteps=0x07, stepsize=0x0b, mute=1
Amp-Out vals: [0x06]
Node 0x17 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In
Amp-In caps: ofs=0x14, nsteps=0x2b, stepsize=0x05, mute=1
Amp-In vals: [0x0e 0x0e] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Power: setting=D0, actual=D0
Connection: 5
0x19 0x14 0x12 0x11 0x15
Node 0x18 [Audio Output] wcaps 0x211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x40]: 48000
bits [0x6]: 16 20
formats [0x5]: PCM AC3
Node 0x19 [Audio Output] wcaps 0xc11: Stereo R/L
Converter: stream=0, channel=0
PCM:
rates [0x540]: 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power: setting=D0, actual=D0
Node 0x1a [Audio Input] wcaps 0x100d0b: Stereo Amp-In R/L
Amp-In caps: ofs=0x00, nsteps=0x17, stepsize=0x05, mute=1
Amp-In vals: [0x17 0x17] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
Converter: stream=0, channel=0
SDI-Select: 0
Power: setting=D0, actual=D0
Connection: 5
0x17 0x14* 0x12 0x11 0x15
Node 0x1b [Vendor Defined Widget] wcaps 0xf00000: Mono


and my audio lspci -nn
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03)


Could u help me ?

Thanks

@podkova: I freaking love you. What's your snail mail address? i'd like to send you my firstborn son.

Thank you for this driver! The mic problem is small beans, it's amazing how well this works! Thank you for all your hard work!

Unfortunately, but I already do not have laptop with this codec. Now at a testing stage is driver VoodooHDA - try it

HI,

Iam new to ideneb installation.

I have installed successfully but audio and video are not working in my laptop.

It will be great if someone help me to get it worked.

Laptop spec:
Sony Vaio VGN-CS12gh
Intel Core 2 duo processor
Intel High definition Sound card
Intel video card
2GB ram
160GB harddisk

Thanks in advance

~Dev