It's late now and I have to go to bed, but I'll be trying this in the next couple days - I'm very visual, so I'm awaiting those screenshots to guide me through before I attempt this.

I just got the wireless working on my dell studio 17 with the new airport fix, so if I can get sound via this fix - that leaves only finding proper video drivers to make this a pretty much fully-functional osx86 install.  We get this {censored} going and I'll post a full out "how to" on the dell 17 - maybe even give a video

Akiraosx i think we have exactly the same notebook.can you upload somewhere the files you used please?

age_sabres18
-really looking forward to the write up and also could you email me your dump and applehda.kext? I would like to compare yours tom mine to see what the major difference is

mdkjr@comcast.net

I was wondering if anyone could provide a detailed step-by-step on this? I checked through Vista that I have the same DevID etc. as yours age_sabres18. I'm running the the HP dv3500t. I tried this but when I put the AppleHDA kext into the System/Library/Extensions folder I get an error saying that the "System ext cannot be used: the System extension 'System/lib/ext/hda enabler.kext' was install improperly and cannot be used.

So my question is, how do I use the HDAEnabler kext with this procedure, what I did was to copy into the same Extensions folder...I'm guessng that's not correct.

Thanks and sorry for this noob issue.

from a noob stand point if you are not used to using terminal I would suggest kexthelper. if you do a search in google you can find it the rest becomes self explanitory

Age_sabres18 Hey man I could really use your codec dump and AppleHDA.kext I feel I am very close and I am just a little confused about pin layout It would be a great help and I looked at the pathmap do all of your inputs and outputs work? Seems like something is missing but that may just be me.
Thanks,
Mark
MDKJR@comcast.net

Okay I now have sound through internal speakers only and I will be working on getting the rest working however does anyone know how to get the sound hardware controlled instead of software controlled?

I have a Gateway P-6860FX notebook with an IDT 92HD71B8 that now works with internal speakers and headphones using the kexts provided in this thread.

One oddity is that Audio/Midi shows the output device, but shows no output controls - it does show input controls (which I assume are actually the output controls). System pref's Sound panel looks right with working controls for output. Input shows internal mic, but also says it has no controls.

Thanks very much to Areon and age_sabres18 for making this happen. And thanks to bifnewman for hooking me up with this thread.

waiting for a driver could shutdown properly under 10.5.5...

idt 9273E

0x111D7676

80865002

revision id 1002

applehda hex data plz.. help me. T,.T

Your Apple Hex Data for your card would be 76761d11 you should do a find for b0761d11 and replace it with yours.....

I did everything step by step but it didn't work, it doesn't even show up in system/sound.

Can anyone help me ? 

HDAUDIO\FUNC_01&VEN_8384&DEV_7682&SUBSYS_10192633&REV_1036

This is my IDT soundboard.

(also if anyone got the time or just want to help me could they modify the kexts to suit my device? just in case i did something wrong)

Thank you in advance

Your font is huge! Why size three font?

hey bkpatel7!! could you get your sound working? Im using the same computer.

I have a noob question, I have already installed the kexts correctly, and I get device ID of 0x103C1505.
How do I transform this to decimal mode? and What program do I have to use to put this in the kexts??

thanks!

Post your codec dump and I will try and get you started....




Go to Applications and use the calculator and switch to programmer view.
The Decimal form of your codec is 272372997

Thanks for the info ridgeline! I was able to get through every step except one:

Edit IOPCIPrimaryMatch with your HD audio controller.
Mine is Intel Audio Controller 0x293e8086

ex. IOPCIPrimaryMatch = 0x293e8086

Where do I find my iopciprimarymatch hex?? thanks!

You would need to look for it under the HDAcontroller.plist
but, I know from experience that yours is already included.... so no need to mess with it....

hey you guys..

hrmm i have IDT AUDIO and my device id = 0x111D76B2
i managed to get int mic to work . nd shutdown working to.
but i need help with line- in .

thanks here the kext if you want to see

Does your master volume control work? or are you having to adjust it via iTunes or other software?

Does your master volume control work? or are you having to adjust it via iTunes or other software?

good job thx shutdown issues solved.
but my int mic doesn't work.

Hey guys.

Ive got a Dell Studio 1535 with 92HD73c1 audio.

My deviceID is 0x10280254 (decimal-271057492)

In step 2 I edited the apple hda binary, replacing B0761D11 with 45028201 in both places

In Step 3 I edited AppleHDA.kext/contents/info.plist, changing CodecID to 271057492.

Step 4 is where I got stuck

I changed the CodecID in AppleHDA.kext/contents/plugins/AppleHDAController.kext/contents/info.plist

The how-to did not tell how to find the HD audio controller,so i didn't mess with it.

This is what it looks like.

<string>AppleHDAController</string>
<key>IOPCIPrimaryMatch</key>
<string>0x793a1002 0x437a1002 0x43831002 0x269a8086 0x26688086 0x27d88086 0x284b8086 0x293e8086 0x026c10de 0x037110de 0x75021039 0x546110b9 0x32881106 0x026c10de 0x03e410de 0x03f010de 0x044a10de 0x044b10de</string>

Do i need to add anything to this list,what am I doing wrong?


Help will be appreciated, thanks.

r u sure.? because mine works finely . now im trying to fix line in

I have a studio 1735 and mine is 0x284b8086, which you have already. We need the pinConfig guide. Wish i had time to dig into it myself.

First of all you are not using the correct info for your card..... You should only attempt to do this if you have gotten a codec dump from linux..... But I would like to say try applehda and hdaenabler and let me know if it works for you,
They are not perfect yet however they do work for me... I am still working on them though so there will be updates.

well in the system profiler it could detect the int mic and line in
but in system preferences it shows "the selected device has no inputs controls"
and i found a recorder and tried. no response.
what did you use to test?
btw, sound won't work after waking from sleep :-(

Here is the header of my Dell Studio 1735 codec dump, same as yours:
Codec: IDT 92HD73C1X5
Address: 0
Vendor Id: 0x111d7675
Subsystem Id: 0x10280256
Revision Id: 0x100202

Here is the link to the entire file in another thread:
http://forum.insanelymac.com/index.php?act...st&id=31468

Here is my modified AppleHDA.kext file that doesn't work and according to the OP needs the pinConfig mod:

1.- You need to edit AppleHDA binary with your hex id in this way I will put mine for example.

111d76b0 this is my codec id

111d for vendor ID IDT
76b0 for dev ID

so inside AppleHDA binary this hex will be b0761d11 if you look is 2 digits back ordered b0 was the last now is the first and so 76 and then 1d and at last 11. thats why 111d76b0 is b0761d11 and you tried 10280254 and this will be 54 02 28 10 not 45 20 82 01

you tried with 0x10280254 this isn´t your codec id is your subsystem id your codec id looks something like "111d1234" (is just an example) because is and IDT with ven id 111d and 1234 for dev id. Using this as an example your codec id will be 34121d11. and translate this to dec will be

111d1234 = 287117876 for using it inside plist in codec id.

if you post your codec dump I will help you to find youd right pin config.

Sorry for bad english.

hope it helps





OK

1.- You need to pach AppleHDA binary with 75761d11
2.- your codec id in dec will be 287143541 for patch inside plist
3.- follow your codec dump try this pin config

speaker

pin complex 0x0d
audio output 0x15

Headphone

pin complex 0x0a
audio output 0x16

Mic at ext

audio input 0x1b
audio selector 0x21
audio mixer 0x1d
audio selector 0x29
pin complex 0x0e

int mic

audioinput 0x1a
audio selector 0x20
pin complex 0x13

Reply with results. find if you have Output with volume control and mute so with input.

Hope it helps




Post your codec dump, for help but I try to explain

for output volume control works you need to have inside your plist

For example

mine

pin complex for int speaker 0xd in dec 13
and output 0x10 in dec 16 for make output obtain volume control inside plist this NODEID 16 must have an AMP this must be in coordination with your codec description inside your codec dump

Node 0x10 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x71 0x71]
Power: 0x0

for input to obtain amp this must concordate with an AMP-IN the pin config for mic int or mic ext

the mine for example

mic ext

audio input 0x13
audio selector 0x1d
audio mixer 0x17
audio selector 0x1b
pin complex 0x0b

in all this path the only one with an AMP-IN was the audio mixer so the amp must be at NODE ID 23 (in hex 0x17)

Hope it helps

I would just like to point out that Areos you are the man.... I had been putting too much info into my path and that is why I lost audio control...... I had the pins correct but, I was trying to hard. I was tracing all through the codec and inputing everything.... such as mixers and selectors..... I can now use my folume control for everything I see my mic but I have no options with it and it appears 7o be non-working at the moment of course this is my Internal Mic I am talking about.....

Thanks Again, I will be working further and post my updates.

I have your codec dump, and I think your Int Mic will be

audio input 0x1a dec 26 this one alone in plist
audio selector 0x20 dec 32 this with a boost value in plist
Pin complex 0x13 dec 19 this inside plist need an amp value

see the attach image.
Inside this amp mod there are other values if you are using plist edit pro just copy and paste it.

Good luck

I will try that now and hopefully have it work soon.... I get a detect on my headphone insertion however I get no sound any ideas?

P.S. can you give me a view of what your amp layout is like for that mic?

Okay I tried the method mentioned and I see it as a built in input but, I still can not get it to do anything I even entered the config data under the controller......

I am also still having issues with headphones, but that is what I am working on now....
I have attached what I have done so far so any Dell Studio guys it mwill save you some time and I will update as I get more done.

Thanks, Mark

Here you go

Good luck

Thank you! Internal sound is working well. No internal mic either.

If I try a applehda.kext from leopard instead of using the one here which I believe to be a Tiger kext I get mic to work however I get a lot of appleHDA widget errors at boot....... but, I have a working mic and speakers with volume control. I get a detect on headphones but I still get no sound....... If you delete the headphones all together you can plug in and get sound through the jack but it does not mute the speakers..... Any advice or ideas is greatly appreciated.

I'd really like to try your Leopard version. Could you post it here? Much gratefulness .

Thanks again for your work!

Tom

Tom, you will probably get a lot of widget errors as I did but it does not seem to affect anything let me know if it works for you.... there is still no volume control on the internal mic , but it does work....

P.S. you still need the HDA enabler

Yes works! I was able to use Skype for 4 continuous hours today, no issues. The system log does fill with widget errors though.

I am not sure why the widget throws so many errors but it does not seem to affect the items we have working however I will continue to work on it and headphones as well. I will let you all know as soon as possible.

Mark

well the mic works but sound card dies from wakeup. weird

FINALLY GUYS !!

LINE IN IS WORKING NOW
FOR 0x111D76B2

THANKS YOU GUYS FOR THE HELP AND ALL.

HERE THE KEXT

Weird, line-in input control is detected but still no response.
Sound card still dies from wakeup.

I have a Compaq CQ40 and I ran OSX86 Tools to get my audio device. It gave me this:



I downloaded age_sabres18's AppleHDA.kext from rapidshare and installed it, and it works.. sort of..

The internal speakers and the headphone jack works (the system detects headphones when I plug them in), but the first problem was that I kept on getting kernel panics every time I shutdown. That was easily solved by fixing permissions using OnyX.

The only problem I have now is that the internal microphone and mic jack don't work. They're detected in SP but like others, Audio preferences doesn't give me a way to control it them, nor is my mic detected when I plug it in..

I've read all about pin configs in this post, but I'm totally lost. Can anyone help me? Thank you in advance..

Keeto

Here's my codec. Thank you very much!

ps: that kext still doesn't work...

so line - in doesnt work for you and wakeup with sound ??

try this one , i edited through your codec
the thing i dont get is how line in doesnt work on yours but
it works on mine same goes to wakeup from sleep.

i will try to fix it

Thanks for your help. Now line-in works.
The problem of wakeup is still there. I discovered that my laptop cannot go to sleep automatically, only by clicking "Sleep" in the Apple menu it could sleep. Is there anything to do with this?

Heres a noob question but how do I install the HDAEnabler.kext?
And heres another question I dont get how to do the first step can someone explain it??

Raidenll, can you tell me if I can just download the last AppleHDA.kext file you used and load it in my laptop or do I have to follow the instructions at the beginning of the thread.

I believe we have the same audio card;

HP dv7 1175nr
Ven 111D Dev 76B2

Also you mentioned that your Web Cam worked out of the box and I just wanted to confirm you didn't have to make any modifications, as mine doesn't seem to work.

Thanks

Eric, Can you post your Sound Card IDs for me to compare and where you got them from (images if possible), I have a DV7-1003tx and RaidenII's kexts didn't work for me, I believe he has a DV5t if I'm correct.



You need to delete the kext in system\extensions and then use a separate program or process to install kexts.
I used http://######.com/osx86tools/, can anyone confirm that this is ok?

Unfortunately I won't have access to my laptop till the weekend. Where cam I get the sound card IDs?

hi guys!! followed all steps and no luck with audio! maybe someone has my same audio card! I have an HP dv3500..!!! any help is greatly appreciated!

Btw my Webcam worked straight off after installing following RaidenII's instructions, it asks you to take a image/video for log in.

Follow RaidenII's guide if you haven't already:
http://forum.insanelymac.com/index.php?sho...=136309&hl=

For your device id, in windows Device Manager:
"Sound, video and game controllers" > IDT High Definition Audio CODEC > Details > Hardware Ids.

Here is mine. Please post your one when you have time.



Regards