Colonel
Mar 15 2006, 02:34 AM
Does anyone know if SigmaTel STAC9220 Audio works with 10.4.4? I'm thinking about getting a new motherboard and I'm not quite sure if this would work or not.
bofors
Mar 15 2006, 06:26 PM
All you have to do is copy in the 10.4.3 version of AppleHDA.kext and it works.
bofors
Mar 15 2006, 09:03 PM
I should add some notes. The rear output works on the SigmaTel but it comes out the wrong jack (blue not green). I am not sure whether input and the front output work for sure or not.
devilhood
Mar 16 2006, 01:12 AM
Will copying that kext fix sound functionality with the SigmaTel STAC9200 in Dell I9400 laptops by any chance?
Rockviech
Mar 24 2006, 01:30 PM
i have the same problem
have an intel 82801FBM says windows xp, installed sigmatel drivers,so i think its a sigmatel onboard card
cant get my card working
device id is
7690
thefabulous9mm
Jun 22 2006, 03:47 PM
QUOTE (devilhood @ Mar 15 2006, 08:09 PM)

Will copying that kext fix sound functionality with the SigmaTel STAC9200 in Dell I9400 laptops by any chance?
Devilhood,
I tried yesterday to fix the 9200 issue replacing my 10.4.5 kext with 10.4.3 kext, i got the same laptop as you, this is a NOT WORKING SOLUTION, this guy is trying to make a driver.
http://forum.osx86project.org/index.php?sh...c=20145&hl=3945
regards
ZepFloyd
Jun 22 2006, 07:37 PM
I also have the STAC 9220 (dev ID 7690) in my Dell D620, Iv spent 7 hrs reading through the site trying everything and nothing seems to work out of any jack.
Does anyone have the kext from 10.4.3. I have JaS 10.4.6.
Mebster
Aug 26 2006, 07:42 PM
Extract the zip and
copy the folder onto the extensions folder and replace the existing AppleHDA.kext.
Then open terminal and run the following:
sudo chmod –R 755 /System/Library/Extensions/AppleHDA.kextand
sudo chown –R root:wheel /System/Library/Extensions/AppleHDA.kextNow open Disk Editor and repair permissions then reboot.Should work out of one of the audio sockets. Try them all. With me it works out of the front headphone sockets.
Click to view attachment (There are many AppleHDA.kext that I’ve found. This one worked for me)
Pedro Peixoto
Aug 31 2006, 10:24 AM
: (
I tried that on my Dell Latitude 120L (Which is a Latin name for the Inspiration 1300) and got no sound output.
What else can i do besides waiting for a driver?
luarken
Nov 21 2006, 12:46 AM
somebody has information about this? SigmaTel STAC9220 Dell D620
Mebster
Nov 21 2006, 04:35 AM
QUOTE (luarken @ Nov 21 2006, 12:46 AM)

somebody has information about this? SigmaTel STAC9220 Dell D620
Follow the instructions from
post 9 and maybe try both kexts. Let us know which works for you.
-AcePlayer
Hatorade
Dec 24 2006, 05:43 PM
neither of those kexts work with sigmatel 9200 (dev ID 7690).
Mebster
Dec 24 2006, 11:28 PM
I can't remember which of the two kext I put up it is but it's worked everytime and I have a SigmaTel STAC9220.
You're looking for the 9200 which is different. And for that I don't believe there is a solution yet. The link above by thefabulous9mm is the place to explore that.
spectheintro
Jan 11 2007, 07:04 PM
QUOTE (AcePlayer @ Dec 24 2006, 06:28 PM)

I can't remember which of the two kext I put up it is but it's worked everytime and I have a SigmaTel STAC9220.
You're looking for the 9200 which is different. And for that I don't believe there is a solution yet. The link above by thefabulous9mm is the place to explore that.
How are you supposed to know which one you have? I have been reading for hours and I can't find a simple breakdown of what hardware ID corresponds to the 9200 and the 9220. My hardware ID is 7690; to which does that correspond?
Mebster
Jan 12 2007, 12:00 AM
QUOTE (spectheintro @ Jan 11 2007, 07:04 PM)

How are you supposed to know which one you have?
Great question! Something that took me a while to figure out and still does everytime I forget.
I used the free version of
Everest in my Windows partition. There may be another way to do the same in OSX. Alternative download
mirrors.
Open Everest
Expand "Motherboard" branch in menu
Select "Chipset"
Select 'South Bridge"
Type listed under "High Defination Audio: Codec Name"Mine says "SigmaTel STAC9220 A1", so it's 9220. Remember 9200 still has no solution (as far as I'm aware).
dangergirl
Aug 13 2007, 08:46 PM
Hi All, some success with the Dell Inspiron E1405! Thank you Taruga!!!
It has an integrated sound card, dev ID 7690. the psykopat link has "codec_Sigma9220.txt". edited third line:
from: Vendor Id: 0x83847680
to: Vendor Id: 0x83847690
Not even sure if that was required, but a match to the actual device ID seemed likely to be appropriate. Used AppleHDApatcher 1.15. rebooted, works like a charm on output, have to try input yet.
10.4.8 jas update
drun7
May 6 2008, 02:38 PM
Both are not working for me Mebster..
I have SigmaTel STAC9220 and I did like you said.. looks the terminal codes are not correct or something..
CAN YOU HELP..
Tell me step by step what should I do?
Mebster
May 6 2008, 10:56 PM
These are someone else's notes I followed. And it always seems to work.
QUOTE
For the Sigmatel audio using 10.4.5 extract the AppleHDA.kext from the attached zip file and place it in your extensions folder and then open terminal and run the following:
sudo chmod –R 755 /System/Library/Extensions/AppleHDA.kext
and
sudo chown –R root:wheel /System/Library/Extensions/AppleHDA.kext
Now open Disk Editor and repair permisions then reboot...
Reply with your Sigmatel 922X part number if it works. Also if audio in and out both work.
Good luck!
I use the attached kext. Not sure if it's the same as the one I've posted above. Then I use Tarugas
AppleHDA Patcher to get my 5.1 sound working.
If none of that works then you can try the sigmatel9220.pkg from
Tarugas wiki site.
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please
click here.