LEOPARD Leo4all complete tutorial Options

[Xs7]

Istallation works flawslessly, but after I have rebooted and the darwin booter starts, it ends up telling me "Still waiting for root device" any1 else had this problem?

Edit:
It worked after i put AHCP or something on, my boot sequence looked a bit different with that enabled. What does it do exactly?

[superman1101]

i understand AHCP is to enable support for old types of bios that dont support ACPI or something like that so it can support your hardware... i'm not sure if this is right.

Also.. i installed Leo4All just fine! exept that when i enable Nvidia 10.5.2 kext and Nvinject 256 for my nvidia 7050GS / nforce 630 the system hangs just before going into the login screen... i don't get any kernel panics.. the system just freezes, does anyone know if we have to modify anything to remove the " 00ffff" thing or something like that? any help is apreciated... i can install nvinject without "nvidia 10.5.2 kexts" with no problem, but i have no video acceleration, maybe you guys know of another driver that works? also... my Realtek ALC662 High Definition Audio isn't detected in the system profiler at all... i've tried some drivers but they dont work, and my lan just doesn't work, even if i select forcedeth under the installation... my specs are in my sig. thanks

[Ferronato01]

HI everyone,

i have installed leo4all v2 and its working fine on my pc, but my graphics card have no acceleration
ITS A NVIDIA GFORCE 6200 TC 256MB.

I dont even can change the resolution of the display.

Can someone help me?

[bubble_gum]

HI everyone,

i have installed leo4all v2 and its working fine on my pc, but my graphics card have no acceleration
ITS A NVIDIA GFORCE 6200 TC 256MB.

I dont even can change the resolution of the display.

Can someone help me?

actually, such questions have to be asked in another thread («Hardware & Drivers» for example), but listen. First of all, you need a working Natit. It just needs to recognize your hardware, availability of changing res or QE/CI absolutely unnecessary. After that you have to find a tutorial, how to add GFX-string of your hardware to boot.plist file (try to search forum on netkas.org). 
hen just install last MBP drivers (file called  NVInstallerV.41, just google), and find these files: NVDANV40Hal.kext, NVDAResman.kext, and GeForce.kext. Then find this string in in
o.plist of ALL THREE files

CODE

<key>IOPCIPrimaryMatch</key>
<string>0x****10de</string>

find your GC device id (boot unuder win and watch properties of GC) and replace **** with your device id. actually, you can keep only one string with your GC's dev id & vendor id and delete all other. they need just to make driver universal for all nvidia cards. Then replace com.Apple.boot.plist with GFX string in it (do everything as
in tutorials). After that you shoul have fully working graphic cards.

[HyperDUDe]

when i boot from dvd its strucked at blue screen nothing happens....

[venusk]

I installed Leo4All. Everything went fine but when i hit enter without typing -v after installation it hangs at blue screen.
And when i type -v and everything works fine except my wireless keyboard. and with only -x(safe boot) keyboard works but my wireless card don ot work do not. Is their someone saw same kind of issue. Please help...

[redfevers]

I wonder anyone can tell me would this work on my configuration:

MB: P4S5A/DX+
CPU: P4 2.4GHz 533MHz
AGP: ATI 1650 Pro 256MB 8x (Dual DVI)
RAM: DDR 2x512MB
HDD: IDE WD 160GB
.
.



Thanks for any help or tipp.

[fishwishy]

got it working.. by using the nvidia kexts from the zephyroth release.. after panic i booted the tiger and by use of pacifist i installed the package from the dvd.. I also ran the included patcher.. and when I botted up it was working

Hi,

I've got extactly the same issue with the kernel panic on my Geforce 7600GT. Can you please explain in more detail what you did to fix it, or even supply me with the relevant files? Pretty please! If I can get the video sorted I'll be a happy chap.
Thanks

[Soz]

Hi!!

So, i'm noob... and trying to install OSX86 with leo4allv2. I've got the endless loop account creation problem and tried to follow sambaran instructions but i'm stuck at f. I think i'm already logged as root, (it says something like root#) but i have no idea how to create an account via the console (g.) and when i tried N., i went to Applications but cannot run kext helper. (when i do a "ls" i got a Kext Helper b7.app but i can't do anything with that).

Can someone help me and explain me clearly how to do it please?

Thanx.

P.S. : Sorry for my english....

EDIT : I've managed to log in but only by booting with -X option. Must be a driver problem.

[cVaD]

I wonder anyone can tell me would this work on my configuration:

MB: P4S5A/DX+
CPU: P4 2.4GHz 533MHz
AGP: ATI 1650 Pro 256MB 8x (Dual DVI)
RAM: DDR 2x512MB
HDD: IDE WD 160GB
.
.



Thanks for any help or tipp.

Unfortunately no, if CPU SSE2 ONLY, you will get a permanent reboot.

[Castortroy2008]

Disable all devises in bios is the easiest way to get goingThis was the only way I could load up Leo4all.Then I enabled them one at a time. For sound, you might want to enable the onboard sound AFTER you get to the install screen and select it in custom install.And don't forget to make an image of the install drive so if you mess it up you can go back to the running state. cheers!Also disable Power management if you can and boot with cpus=1 for core duo like me.

[fyrekrig]

Hi,

I have followed Sambaran's guide but when I try to login with root and the new root password I get
"login incorrect"

What am I doing wrong.

[mesi]

Hey guys.
well i'm compleetly newb on this things so that is probably my biggest prob.

I have a laptop asus G1 - specs:

intel core 2duo T7200
-intel pro/wireless 3945abg
-Chipset: mobile intel 945pm express chipset
-Mem: DDRII 533/667mHZ, w/ 2GB
-Graphic Card: NVIDIA GeForce Go7700 512 MB

I've instaled succesfully leo4allv3. the thing is when i reboot i have kernel panic and after a while it just says "Computer version G1" and freezes here. No boot happens - nothing.

I've tryed severel times with different kernels. I tested my cpu meaning I know SSE2 and SSE3 are supported.

however when it comes to chose the 3rd partie drivers I have no clue what to chose in the chipset. and I've tried with Intel one and without the sound and graphic and the error is always the same. still i guess the problem should be here.

I've read somewhere that it may be the Bios but on that field I'm even more newb.

I'd apreciate some help.

cheers.

[Styxie]

When I try to boot Leo4allv3 I get the ACPI platform error (unable to find driver for this platform). Is there a fix to this problem?

SPECS:
AMD 3200+
ASUS A8V-MX K8M800 Motherboard
SATA II 500GB WinXP drive
IDE 60GB Leopard drive

[mesi]

Ok guys. So after 10 installs and formats finally i have a working leopard on my Asus G1

So what did I do. When we're asked to customize the elements to instal use:

kernel vanilla 9.2.0

chipset: Intel 7/8/9

about the sound card i used the same of the tutorial user AC97. but it isn't working yet

graphic i used the nvidia kext and the inject for nvidia GO. However i'm not sure there is a graphic acelleration working

SMBIOS used the one for DDR2 667 (i had never tried it before)

take out the firewire thing (I guess the problem was actually here)

now i'll have a hard but funny time working for the first time in this thing.

Good luck and thanks for everything

[Katz93EMO]

*tzz*

[ken_max04]

im trying to install leo4all V3 and since i press enter give a
panic error i upload the pic of it
what i can do in this case
also here is the info of my computer
anything that i have to change in the BIOS

Motherboard Model: ASUS A8N32-SLI DELUXE
CPU: AMD Athlon x2 4200 2.2 GHz
Chipset: NORTH BRIDGE NVIDIA NFORCE4 SLI X16
HDD: 2 500GB Sata and 1 320GB Sata
Sound Card: integrate Realteck AC'97

Attached File(s)

 screen.JPG ( 346.46K ) Number of downloads: 35

 

[VanillaTbone]

Well, Leo4All 10.5.2 is working well on my machine. My computer stats are in my sig...

I am just wondering how to update to 10.5.3 without boofing my install... And suggestions?

I have worked with the OSx86 project for years and I am still learning the advanced steps...

[Katz93EMO]

ken_max04, ich habe das selbe Problem.
Try -s

[ken_max04]

i already try -v -s always give me the same error