Subscribe to our RSS news feed
AAPL 199.94 (-1.25)

19 Pages V  « < 3 4 5 6 7 > »   
Closed Topic Start new topic
Hardware Compatibility List - Leopard 10.5.2, ONLY post if you're not comfortable posting in the Wiki directly
*
  • Group: Members
  • Posts: 1
  • Joined: 23-April 08
  • Member No.: 220,294
Current OS X Version: 10.5.2

Desktop

Prebuilt? N

Install Methods summary: Kalyway 10.5.2 DVD Intel_AMD (SSE2/SSE3) EFI V8

Does EFI and/or the Vanilla kernel work?
partitioned as GUID, EFI v8 + Vanilla Kernel)


Motherboard
Manufacturer: ECS
Motherboard Model: 945GZT-M
Chipset: Intel® 945GZ, Intel® ICH7
BIOS Version: , Revision: 1/1/2007
BIOS setup options: CPU TM FUNCTION: ENABLED, EXCUTE DISABLE BIT: ENABLED, ENHANCED HALT: ENABLED, APIC MODE: ENABLED
Audio:
LAN: YES
SATA & IDE: YES

Processor
Processor Model: E4300
Speed: 1.8GHZ
Recognized as what in System Profiler: 1.8GHZ INTEL CORE 2 DUO

Video Card
Model: INTEL GMA950
Memory: 8MB (SHARED)
Board Manufacturer: ECS
Patches used: NONE USED (GMA950 DRIVERS ON DISC USED)
QE/CI: YES/YES
All resolutions available?

Other PCI/PCI-e Components NONE
Wireless/Wired Card NONE
Interface: ON BOARD
Manufacturer: REALTEK
Model: RTL8100C
Works? Y
Patches: USED DEFAULT ENABLED DRIVERS ON DISK

Sound Card
Interface: ON BOARD
Manufacturer: REALTEK
Model: ALC883
Works? Y
Patches: USED DEFAULT ENABLED DRIVERS ON DISK

Other Accessories
NONE


THIS BOARD AND PROCESSOR WORK PERFECTLY! USING DEFAULT SETTINGS ON INSTALL DISK ENABLED, INTEL GMA950 DRIVER INSTALLED

945GZT-M, INTEL CORE2DUO E4300, 80GB IDE HD, IDE NEC DVD+RW ND-1100A, 1GB PC5300
PM Profile Card
Go to the top of the page
+ Quote Post
*
  • Group: Members
  • Posts: 1
  • Joined: 15-February 06
  • Member No.: 23,435
Current OS X Version: 10.5.2

Desktop/Laptop? Desktop

Prebuilt? (Y/N) No

Install Methods summary: Kalyway 10.5.2 Intel/AMD

Does EFI and/or the Vanilla kernel work? unknown

(in following sections, if you don't know or not sure, write "unknown")
Motherboard
Manufacturer:Epox
Motherboard Model:EP-9NPA Ultra
Chipset:nForce 4 Ultra
BIOS Version: , Revision:unknown
BIOS setup options: Normal, LAN Disabled
Audio: Works out of the box? yes, with nvidia AC97 patch
LAN: Works out of the box? partial with forcedeth (no afp access for some reason) a Realtek PCI card worked perfectly
SATA & IDE: IDE yes, SATA not tested

Processor
Processor Model:Athlon 64 X2 4200+ Socket 939
Speed:2.2Ghz
Recognized as what in System Profiler: Unknown 2.2Ghz

Video Card (if you have integrated and PCI/AGP, use this template twice)
What type of card (PCI Express/AGP/Integrated): PCIe
NVIDIA/ATI/Intel?Nvidia
Model:6600GT
Memory:128MB
Board Manufacturer:Gigabyte
Patches used:NVInject 0.2.0 128
QE/CI:y/y
All resolutions available? so far up to 1280x1024

Other PCI/PCI-e Components (USB are listed in Other Accessories below)
Wireless/Wired Card (for PCI/PCI-e cards only)
Interface: PCI/PCI-e?PCI
Standard (Wireless only): (example: 801n)
Manufacturer:??
Model:Realtek
Works? (Y/N, if "Y", list patches)Y
Patches:


Other Accessories (USB/FIREWIRE)
Type (Webcam, External Sound Card, USB bluetooth dongle, etc.):onboard firewire
Name:
Manufacturer:
Works? (Y/N, if "Y", list patches, if needed)y
Patches/Work out of the box?
PM Profile Card
Go to the top of the page
+ Quote Post
****
  • Group: Members
  • Posts: 193
  • Joined: 7-January 08
  • From: INDIA
  • Member No.: 170,386
zephyroth kalyway & leo4all
processor: amd athlon x2 dual core 4400+
motoherboard asus m2npv-vm
graphics:geforce 6150 no qe/ci (using macvidia or by removing nvdaresman).....
nforce 430 lan working with nforcethernetcontroller link:
audio soundmax hd audo working...(no audio in) link:
everything working fine but no qe/ci.....

installation guide:http://forum.insanelymac.com/lofiversion/index.php/t83688.html
PM Profile Card
Go to the top of the page
+ Quote Post
*
  • Group: Members
  • Posts: 17
  • Joined: 16-April 08
  • From: Paris
  • Member No.: 215,859
Current OS X Version: 10.5.2

Desktop Home made

Prebuilt: No

Install Methods summary: (Kaliway 1.5.2 default + Nvinjet 256Mo working other (Leo4all, ...) crash during installation

Does EFI and/or the Vanilla kernel work? No, used default options from Kaliway DVD which is not Vanilla

Motherboard
Manufacturer: Asrock
Motherboard Model: Conroe1333-1394
Chipset: 945GC A2 + ICH7
BIOS Version: 1.0
BIOS setup options:
- voltage settings at the bottom of chipset page to HIGH
- under CPU settings: No Execute option is Disabled
Audio: Realtek ACL888 works out of the box
LAN: Realtek RTL8111B / RTL8111C works out of the box
SATA & IDE: SATA works out of the box - IDE not tested

Processor
Processor Model: E6550
Speed: 2.33
Recognized as what in System Profiler: Intel Core 2 Duo 2.33GHz

Video Card
What type of card: PCI Express
NVIDIA
Model: 8600GT
Memory: 256
Board Manufacturer: Asus
Patches used: No
QE/CI: Don't know what that is
All resolutions available: Yes

No Other PCI/PCI-e Components

Other Accessories
Bluethooth USB Key
Manufacturer: MSI
Work out of the box with Kaliway 1.5.2 (chipset Broadcom) but not with the wireless Mighty mouse (Detected but not possible to "register" the mouse)

So far, very stable BUT sleep not working well (wake up sucessfully but no more ethernet card...)
PM Profile Card
Go to the top of the page
+ Quote Post
*
  • Group: Members
  • Posts: 8
  • Joined: 9-February 08
  • Member No.: 184,631
After installing Kaliway 10.5.2 and when my computer starts it will just show a blank screen after rebooting.and i try to install zeproth 10.5.2 it will say CPU panic.what does it means?
PM Profile Card
Go to the top of the page
+ Quote Post
*
  • Group: Members
  • Posts: 17
  • Joined: 16-April 08
  • From: Paris
  • Member No.: 215,859
QUOTE (pro_viruz @ Apr 27 2008, 05:29 PM) *
After installing Kaliway 10.5.2 and when my computer starts it will just show a blank screen after rebooting.and i try to install zeproth 10.5.2 it will say CPU panic.what does it means?


What is your configuration?
Gives as many details as possible (see my signature for an example)
PM Profile Card
Go to the top of the page
+ Quote Post
*
  • Group: Members
  • Posts: 8
  • Joined: 9-February 08
  • Member No.: 184,631
Hi Bootoo,

thanks for fast reply..here is my system configuration:


CPU Arch : 1 CPU - 2 Cores - 2 Threads
CPU PSN : AMD Turion 64 X2 Mobile Technology TL-60
CPU EXT : MMX(+) 3DNow!(+) SSE SSE2 SSE3 x86-64
CPUID : F.8.2 / Extended : F.48
CPU Cache : L1 : 2 x 64 / 2 x 64 KB - L2 : 2 x 512 KB
Core : Trinidad (90 nm) / Stepping : BH-F2

Freq : 2009.07 MHz (200.91 * 10)
MB Brand : Quanta
MB Model : 30B8
NB : NVIDIA GeForce Go 6100 rev A2
SB : NVIDIA nForce 410/430 MCP rev A3

GPU Type : GeForce Go 7200
GPU Clocks : Core 450 MHz / RAM 700 MHz
DirectX Version : 10.0

RAM : 2048 MB DDR2 Dual Channel
RAM Speed : 334.8 MHz (CPU/6) @ 5-5-5-13
Slot 1 : 1024MB (PC2-5300)
Slot 1 Manufacturer : Samsung
Slot 2 : 1024MB (PC2-5300)
Slot 2 Manufacturer : Samsung

hope you can help me with this..

p.s it only succesfully once on kaliway,but after i restart. it wont boot up.
PM Profile Card
Go to the top of the page
+ Quote Post
*
  • Group: Members
  • Posts: 1
  • Joined: 23-April 08
  • Member No.: 220,197
LOADED THE KALYWAY 10.5.2, RAN FORMAT FOR HFS JOURNALED, 10 MINUTES LATER UP AND RUNNING, NO GLITCHES NO PROBLEMS, FASTEST BOOT AND SYSTEM LOAD IVE SEEN, RUNS ILIFE, LOGIC PRO 8, CUBASE 4, REASON 4, RME FIREFACE 800, AXIOM 61, USED APPLE UPDATE......NO PROBLEMS AT ALL! EVERYTHING VERY FAST.

HARDWARE; GIGABYTE GA-P35-DS3L MOTHERBOARD, INTEL Q6600 PROCESSOR, CORSAIR 4 GIGS DDR2-800 CL 5-5-5-12 MEMORY, WESTERN DIGITAL CAVIAR 250 GIG 16M CACHE SATA HARD DRIVE, NVIDIA 7900 GT KO 512M PCIX VIDEO CARD.

XBENCH RESULTS 166.94
PM Profile Card
Go to the top of the page
+ Quote Post
*
  • Group: Members
  • Posts: 17
  • Joined: 16-April 08
  • From: Paris
  • Member No.: 215,859
Sorry but not competent with AMD...
Looks like a laptop right?

Have a look at the list of compatible components below:
http://wiki.osx86project.org/wiki/index.php/Main_Page

You can also try the list of compatible laptop here:
http://wiki.osx86project.org/wiki/index.ph...0.5.2/Portables

From a general point of view, you need to ask yourself 2 questions:
- Is my hardware compatible? (Installed sucessfully by someone else is the best)
- Do I have the right Bios version and the right parameters in it

If you can answer YES to these 2, it should be dead easy...
Good luck angel.png
PM Profile Card
Go to the top of the page
+ Quote Post
*
  • Group: Members
  • Posts: 8
  • Joined: 9-February 08
  • Member No.: 184,631
Thanks BooToo!
PM Profile Card
Go to the top of the page
+ Quote Post
***
  • Group: Members
  • Posts: 129
  • Joined: 27-April 08
  • Member No.: 222,188
Current Version: 10.5.2 (Kalyway)

Laptop

Prebuilt: Yes

Manufacturer: Hewlett Packard (HP)
Model: Pavilion dv9540us

Install Method:

Part 1: http://www.youtube.com/watch?v=Gd6YcIw0Aik
Part 2: http://www.youtube.com/watch?v=WRSbKTxATbQ

Motherboard
Manufacturer: Quanta
Motherboard Model: 30CB
Chipset: Intel GM965
BIOS Version: F.08 , Revision: Unknown
BIOS setup options: None, only error checking features enabled.
Audio: Used 268Installer2 then Azalia Audio, then 268Installer2 again for my Realtek HD Audio (268)
LAN: Used r1000 patch
SATA & IDE: Works out of the box

Processor
Processor Model: Intel Core 2 Duo
Speed: 1.5GHz
Recognized as what in System Profiler: Intel Core 2 Duo

Video Card
What type of card: PCI Express x16
NVIDIA
Model: 8600M GS
Memory: 256 VRAM, 768 shared by system
Board Manufacturer: Hewlett Packard (HP)
Patches used: NVinject 4.1, NVinjectGO, NVinject 256MB
QE/CI: Fully supported

Other PCI/PCI-e Components
Wireless
Interface: PCI-e
Wireless: a/g/n
Manufacturer: Intel
Model: Intel 4965 a/g/n
Works? No.
Patches: None available

Other PCI/PCI-e Components (USB are listed in Other Accessories below)
Wired Card
Interface: PCI/PCI-e?
Manufacturer: Realtek
Model: Realtek RTL8168B/8111B Family PCI-E Gigabit Ethernet NIC
Works? Yes
Patches: r1000 (included in the 10.5.2 kalyway disc)

Other Accessories (USB/FIREWIRE)
Type: Webcam
Name: HP Webcam
Manufacturer: Chicony Technologies
Works? No.

Note: my fingerscanner thingy is recognized in OS X, but i don't think ther is something for OS X to use it with...
PM Profile Card
Go to the top of the page
+ Quote Post
*
  • Group: Members
  • Posts: 12
  • Joined: 28-April 08
  • Member No.: 222,835
IBM Thinkpad R40 runs with "Kalyway_10.5.2_DVD_Intel_Amd" out of the box (sound, network, usb, screen 1024x768)
PM Profile Card
Go to the top of the page
+ Quote Post
*
  • Group: Members
  • Posts: 22
  • Joined: 22-September 07
  • Member No.: 136,289
Current OS X Version: Kalyway 10.5.2

Desktop

Prebuilt? N

Install Methods summary: (List all methods tested, check preferred method - the one you are writing about now)

Does EFI and/or the Vanilla kernel work? Y
(in following sections, if you don't know or not sure, write "unknown")
Motherboard
Manufacturer: Intel
Motherboard Model: DG33BU
Chipset: G33 Express
BIOS Version: , Revision: Unknown
BIOS setup options: SATA needs IDE for install, AHCI after
Audio: Y
LAN: N (needed to buy Netgear adapter)
SATA & IDE: Y (only SATA)

Processor
Processor Model: Intel Core 2 Quad Q9300
Speed: 2.5Ghz
Recognized as what in System Profiler: 2.5ghz Unknown

Video Card (if you have integrated and PCI/AGP, use this template twice)
What type of card (PCI Express/AGP/Integrated): PCI-e
NVIDIA
Model: 8600GT
Memory:266MB
Board Manufacturer: EVGA
Patches used: nvinject
QE/CI:Both
All resolutions available? Y
PM Profile Card
Go to the top of the page
+ Quote Post
*
  • Group: Members
  • Posts: 8
  • Joined: 9-February 08
  • Member No.: 184,631
sad.gif can someone assist me on this problem... i dont know how to solve this. sad.gif
Attached File(s)
Attached File  IMG_0001.JPG ( 200.6K ) Number of downloads: 66
Attached File  IMG_0002.JPG ( 216.27K ) Number of downloads: 45
 
PM Profile Card
Go to the top of the page
+ Quote Post
*
  • Group: Members
  • Posts: 1
  • Joined: 22-September 07
  • Member No.: 136,342
Current OS X Version: 10.5.2

Desktop/Laptop: Desktop

Prebuilt: N

Install Methods summary: LEO4ALLv2
EFI v8 using ls8 pre-script. GUID Partition map.
Everything's working perfectly.


Motherboard
Manufacturer: ASUS
Motherboard Model: MAXIMUS-EXTREME
Chipset: X38 + ICH9R
BIOS Version: 1004
Audio: AD1988
LANs: 2 x MARVEL YUKON, not still works, but installed one PCI Realtek 8139 NIC and work perfectly. I will examine the malfunction of the Marvel Yukon later
SATA: seems to work: only HD installed Maxtor SATA II 160 Gb on 3d AHCI (controller mode) port

Processor
Processor Model: Intel Core 2 Quad - All cores working
Speed: 2.4GHz (Q6600) OC'ed to 3.61 GHz
Recognized as what in System Profiler: 3.61 Ghz

Memory
2x1 Gb OCZ DDR3 1600 MHz (recognized from System Profiler as 106 MHz) I must correct this...

Video Card
What type of card: PCI Express
NVIDIA
Model: 8800GT
Memory: 320 MB
Board Manufacturer: POINT OF VIEW
Patches used: NVinject from 10.5.2 (v.33)
QE/CI: Yes
All resolutions available: Yes
Monitor: Philips P200 correctly recognized at maximu resolution of 1600x1200 @ 71 Hz
Dual Monitor: not still tried.

Misc
AHCI activated in BIOS.
J-Micron controller disactivated in BIOS.
OS installed via USB DVD Player
Still testing all the environment... when finished i'll post my final result with the benchmark
http://www.youtube.com/watch?v=htlqZVD1lxQ
PM Profile Card
Go to the top of the page
+ Quote Post
*****
  • Group: Members
  • Posts: 268
  • Joined: 2-August 06
  • Member No.: 48,807
The Specs
D915GAG intel board
P4 3.0 GHz Prescott (630) processor
x1900xtx
2 gig ram
80 gig seagate sata HD

The install
Kalyway 10.5.2 DVD Intel_Amd
formated MBR, drive name leo
I turned off languages, fonts,
used kabyl kernel
ATYinject for 19xx series
audio I left stock
network I left stock
wifi I turned off
Mobo_chips, I used AppleOnboardPCATA and AppleGenericPCATA (turned off all the others)
Turn off all 3rd party apps
Patches used the Lastnetkassmbios
turn off the French keyboard support but turned on the TimeMachineFix and USBPCGen

Booted perfectly first time. Wow. QE, CI, network, sound.... some trouble with sleep (I'll have to look into this).

Thanks Kaly and all the other contributers. I'll try to do my small part.

Khan
PM Profile Card
Go to the top of the page
+ Quote Post
*
  • Group: Members
  • Posts: 4
  • Joined: 5-February 08
  • Member No.: 182,603
Computer: Laptop
Dell Inspirion 5150

CPU 3.06Ghz P4 with HT
RAM: 512MB RAM
Video: GeForce 5200 GO

Installed with iATKOS V 1.0i (10.5.1)
Bootloader: Darwin
ALL Patches
Drivers: VGA: Nvidia: Natit
System: AppleSMBIOS.kext
Network: Broadcom drivers

What Works: Sound, Wifi, Ethernet, DVD Player
What Doesn't work: No Battery meter, DVD-RW drive only reads as Combo Drive (Read DVD/Write CD)


Use the Kalyway 10.5.2 ComboUpdate file from "usual places" to update to the newest version...it takes a LONG time to boot after running the update (over a minute of black screen after the Apple symbol and spinning circle at bottom) but it will load. Remember, you can install SOME updates from the Start Menu, just NO Airport updates and NO Security Updates.....
PM Profile Card
Go to the top of the page
+ Quote Post
*
  • Group: Members
  • Posts: 17
  • Joined: 10-April 08
  • From: Brazil
  • Member No.: 213,007
Current OS X Version: 10.5.2

Desktop

Install Methods summary: Kalyway 10.5.2 (1x dvd burn)

Does EFI and/or the Vanilla kernel work? Yes

Motherboard
Manufacturer: Abit
Motherboard Model: IP35 Off-limits
Chipset: Ip35
BIOS Version: , Revision:
BIOS setup options: SATA set as IDE
Audio: Works out of the box? Yes, but only stereo.
LAN: Works out of the box? Yes
SATA & IDE: Yes, IDE CD-ROM Works after installation only (need sata dvd drive to install)

Processor
Processor Model: Intel Core 2 Duo E8200
Speed: 2,8Ghz
Recognized as what in System Profiler: 2.72 Ghz Unknown

Video Card
What type of card (PCI Express/AGP/Integrated): PCI-Express
NVIDIA
Model: 8800GT
Memory:512 mb
Board Manufacturer: PNY
Patches used: Nvinject 512
QE/CI: Yes
All resolutions available? Yes
PM Profile Card
Go to the top of the page
+ Quote Post
*
  • Group: Members
  • Posts: 2
  • Joined: 2-May 08
  • Member No.: 224,534
ok i tried installing kalyway & iAtkos on my Sony VAIO VGN-FS920 Laptop but they both failed:

is there something else i can use? i've read and read but have gotten nowhere

Specs:
-------------------------
CPU-Z version 1.44.2
-------------------------

Processors Map
------------------------------------------------------------------------------------

Number of processors 1
Number of threads 1

Processor 0
-- Core 0
-- Thread 0


Processors Information
------------------------------------------------------------------------------------

Processor 1 (ID = 0)
Number of cores 1 (max 1)
Number of threads 1 (max 1)
Name Intel Pentium M 740
Codename Dothan
Specification Intel® Pentium® M processor 1.73GHz
Package Socket 479 mPGA (platform ID = 5h)
CPUID 6.D.8
Extended CPUID 6.D
Brand ID 22
Core Stepping C0
Technology 90 nm
Core Speed 798.1 MHz (6.0 x 133.0 MHz)
Rated Bus speed 532.1 MHz
Stock frequency 1733 MHz
Instructions sets MMX, SSE, SSE2
L1 Data cache 32 KBytes, 8-way set associative, 64-byte line size
L1 Instruction cache 32 KBytes, 8-way set associative, 64-byte line size
L2 cache 2048 KBytes, 8-way set associative, 64-byte line size
FID/VID Control yes
FID range 6.0x - 13.0x
max VID 1.356 V
Features XD


Chipset
------------------------------------------------------------------------------

Northbridge Intel i915GMS/i910GML rev. 03
Southbridge Intel 82801FBM (ICH6-M) rev. 03
Memory Type DDR2
Memory Size 1024 MBytes
Channels Dual
Memory Frequency 266.0 MHz (1:2)
CAS# 4.0
RAS# to CAS# 4
RAS# Precharge 4
Cycle Time (tRAS) 12
Memory SPD
------------------------------------------------------------------------------

DIMM #1

General
Memory type DDR2
Module format SO-DIMM
Manufacturer (ID) Infineon (C100000000000000)
Size 512 MBytes
Max bandwidth PC2-4300 (266 MHz)
Part number 64T64020HDL3.7A
Serial number --------
Manufacturing date Week 14/Year 06

Attributes
Number of banks 2
Data width 64 bits
Correction None
Nominal Voltage 1.80 Volts
EPP no
XMP no

Timings table
Frequency (MHz) 200 266 266
CAS# 3.0 4.0 5.0
RAS# to CAS# delay 3 4 4
RAS# Precharge 3 4 4
TRAS 9 12 12
TRC 12 16 16

DIMM #2

General
Memory type DDR2
Module format SO-DIMM
Manufacturer (ID) Nanya Technology (7F7F7F0B00000000)
Size 512 MBytes
Max bandwidth PC2-4300 (266 MHz)
Part number M2N51264TUH8A2F-37
Serial number --------
Manufacturing date Week 05/Year 07

Attributes
Number of banks 2
Data width 64 bits
Correction None
Nominal Voltage 1.80 Volts
EPP no
XMP no

Timings table
Frequency (MHz) 200 266 266
CAS# 3.0 4.0 5.0
RAS# to CAS# delay 3 4 4
RAS# Precharge 3 4 4
TRAS 9 12 12
TRC 12 16 16
PM Profile Card
Go to the top of the page
+ Quote Post
***
  • Group: Members
  • Posts: 129
  • Joined: 21-November 06
  • From: Los Angeles
  • Member No.: 65,274
Toshiba Satellite A135-S4467
Kalyway leo iso used (10.5.2) successfully working
Processor: Core 2 Duo SS3
945GM chipset
Audio and Lan and firewire works
video: GMA950 max resolution 1280*800 changeable
QE fully working
DVD burner works
5-in-1 card reader doesn't work
Atheros wireless doesnt work
PCMCIA(CardBus) doesn't work
linksys PCMCIA doesnt work
I used the raltek 856 kext to help me with the audio
no battery meter . . .
sleep doesn't work!
headphones jack doesn't work .
PM Profile Card
Go to the top of the page
+ Quote Post
19 Pages V  « < 3 4 5 6 7 > » 
Closed Topic Start new topic

2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:

 

RSS Lo-Fi Version Time is now: 21st November 2009 - 11:27 AM