Hardware Compatibility List - Leopard 10.5.2, ONLY post if you're not comfortable posting in the Wiki directly |
  |
Hardware Compatibility List - Leopard 10.5.2, ONLY post if you're not comfortable posting in the Wiki directly |
|
SharkyNL
InsanelyMac Protégé
|
 |
 Sep 11 2008, 04:38 PM Post #261
|
|
Dell Optiplex GX280 Small Desktop Computer in clamshell case w/ 2.8Ghz P4 HT
Install Method: Leo4Allv3 w/ Kernel 9.2.2, AC97 (Audio), Intel ICHx (Chipset Drivers) and Nvinject 0.2.1 with 256mb Audio: works with AC97 LAN: Installed Realtek RTL8139D PCI 10/100 card, onboard NIC not working Video: Installed a XFX Geforce 7300GS (Low-profile), onboard (GMA900) works (but QE/CI both not work) Vanilla kernel: does not work Sleep, restart, shutdown works (If you want sleep working you have to go to the BIOS to set APCI Power Mode S1) |
  |
 
|
|
tertore
InsanelyMac Protégé
|
|
|
Sep 12 2008, 02:23 PM Post #262
|
|
Current OS X Version: 10.5.2
Desktop Prebuilt? NO Install Methods summary: LEO4ALL v3 + CALLISTO ATI DRIVER build 006 Partitioned as MBR, EFI v8 (NO VANILLA KERNEL!!) Motherboard Manufacturer: ASROCK Motherboard Model: 4COREDUAL - VSTA Chipset: VIA Apollo PT880 Pro / PT880 Ultra / PT894 BIOS Version ami 02/26/08 BIOS setup options: not important bios settings modifications Audio: ONBOARD REALTEK (INSTALL AzaliaAudio driver from installer) LAN: ONBOARD VIA RHINE (INSTALL ViaRhine driver from installer ) SATA & IDE: Works out of the box? YES Processor Processor Model: Intel® Core™2 CPU 6400 Speed: 2.13GHz Video Card PCIe ATI Model: Radeon X800 XT Memory: 256 MB DDR3 Board Manufacturer: Patches used: install Callisto ATI driver build 006 (DEVICE ID: 5d57) QE/CI: Not tested All Resolution supported by videocard Other Accessories (USB/FIREWIRE) Type (External USB HD): Works? Yes, no patches required INSTALLATION NOTE: Install LEO4ALL v3 ditro, select: - Default Kernel!! - AzaliaAudio Driver - Via Chipset for motherboard (VIA, SiS, Marvell and SB) - ViaRhine chipset for ethernet - Do not select any video driver After installation completed, you can build the Callisto ATI driver with 5d57 as device ID KNOWN ISSUES: Once time system freeze when i have trying to install divx codecs. Not other important issues can be found, for now 
|
|
|
|
|
F10vv3R
InsanelyMac Protégé
|
|
|
Sep 12 2008, 09:23 PM Post #263
|
|
Hi
I tried to install the OSX Kalyway dualboot, but I get an error after pressing F8 and typing -v. There's a page of writing, I could copy it out if anyone's interested, but basically I don't get to the install screen. Laptop : Toshiba A200 25B Processor : Intel Core 2 Duo T5450 Graphics Card : HD2600 2x160Gb HD's Chipset/ICH : GM965/ICH8-ME |
|
|
|
|
boriss
InsanelyMac Protégé
|
|
|
Sep 14 2008, 08:13 PM Post #264
|
|
I got leo4allv4.1 running on a HP Pavilion laptop DV9205US:
Pavilion dv9205us System Configuration
|
|
|
|
|
Jailbreakboy
InsanelyMac Protégé
|
|
 Sep 15 2008, 02:13 AM Post #265
|
|
Current OS X Version: 10.5.2
Install method: KALYWAY 10.5.2 Type: Laptop Model: HP Pavilion dv6830us CPU: Core 2 Duo 1.83GHz Memory/DDR: 3GB Motherboard Chipset:unknown SATA: Work, no patches required USB: Work, no patches required Audio: Work, Apple HDA Patcher 1.2 LAN: Work No Patches WiFi: Yes, Patched - Broadcom wireless patch Bluetooth: Work, no patches required FireWire: Work, no patches required Web Cam: Built in Working, no patches required Express Card: Work, no patches required Video Primary: Manufacturer: Intel Model: GMA x3100 video Memory: 358mb Shared |
|
|
|
|
DarkUser89
InsanelyMac Geek
|
|
|
Sep 15 2008, 09:57 AM Post #266
|
|
Current OS X Version: 10.5.5 (9f32)
Prebuilt? Install Method: Retail Apple Mac OS X 10.5 Leopard Disk Does EFI and/or the Vanilla kernel work? Modbin Kernel! Motherboard Manufacturer: AsRock Motherboard Model: ConRoe1333-DVI/H R2.0 Chipset: 945G/945GC A2 BIOS Version: 2.10 (hack) BIOS setup options: Default Audio: Realtek ALC888 (2cannel working with AzaliaAudioPkg) LAN: Realtek RTL8111B (working no patch needed) SATA & IDE: (working no patch needed) Processor Processor Model: Intel Pentium D 805 Speed: 2,66GHz System Profiler: 2,66GHz Intel Pentium D Video Card Card Interface: PCI-e NVIDIA/ATI/Intel: ATI Model: RX1650pro Memory: 256 Board Manufacturer: MSI Patches used: Patched the original kexte QE/CI: Supported/Hardware Accelerated All resolutions available: Yes Sound Card Interface: PCI Manufractur: Terratec Model: Aureon 5.1 Fun Patches used: Yes (Cmedia 3738) |
|
|
|
|
sailor070
InsanelyMac Protégé
|
|
|
Sep 15 2008, 06:00 PM Post #267
|
|
Current version: 10.5.2
Desktop/Laptop? Desktop Prebuilt? Y Manufacturer: ASUS Model: Eee Box B202 Install Methods summary: just installed Kalyway 10.5.2 Intel AMD Does EFI and/or the Vanilla kernel work? Vanilla kernel works Motherboard Manufacturer: n/a Motherboard Model: n/a Chipset: ?? BIOS Version: ?? BIOS setup options: ?? Audio: On-board audio OUT works OOB LAN: On-board 10BaseT works: OOB SATA: (changed) SATA HITACHI 5K250-160: OOB Processor Processor Model: N270 Speed: 1.6Ghz Recognized as what in System Profiler: 1.6Ghz Unknown Video Card What type of card (PCI Express/AGP/Integrated): Integrated NVIDIA/ATI/Intel? Intel Integrated Model: GMA950 Memory: 64MB (shared) Board Manufacturer: INTEL Patches used: none QE/CI: NO All resolutions available? no, 1024x768x32 OOB |
|
|
|
|
georgeorange
InsanelyMac Protégé
|
|
|
Sep 20 2008, 12:15 PM Post #268
|
|
KALYWAY 10.5.2 (versus iDeneb 10.5.4 patched to v1.1)
on Desktop KALYWAY Install Method summary: - Win XP on a SATA drive prior to intall - bought a valid Leopard license ("because we really, really hate Microsoft") - OSX86 on additional IDE, as SATA not recognized during install - partitioned as MBR - Sleep Kernel used - NO EFI, since XP Bootloader - after install, XP partition re-set active with G-Parted, two partitions are now active, one on SATA (XP), one on IDE (OSX), then added chain0 to the boot.ini menu, boot menu now shows Win XP and Mac OSX and boots into both Motherboard Manufacturer: MSI Motherboard Model: K9N SLI MCP Chipset: NVIDIA nForce 570 BIOS updated BIOS setup options: SATA cannot be set "native", no "AHCI", therefore IDE install Audio: Realtek ALC883, works out of the box LAN: onboard nForce DOES NOT WORK with any of the 3 available forcedeth.kexts SATA & IDE: fine after istall Processor Processor Model: AMD Athlon 64 X2 3800+ Recognized as what in System Profiler: 2.01 GHz Unknown, but much faster in reality Video Card PCI Express NVIDIA Model: GeForce 7300 GT Memory: 256 MB All resolutions available, but fonts not very sharp, OSX issue though Other USB devices, like printers, scanners etc.: All installers DO NOT WORK, because they don't recognize the platform, I suppose. THEN I tried IDeneb 10.5.4, patched to V 1.1: This time, the SATA disk was recognized and a partition was able to be used for installation! A problem was still the OnBoard NForce Ethernet Controller, who wouldn't run with any of the three different nforcekext versions currently available. But a cheap Realtek 8139 Ethernet Controller is supported by iDeneb v1.1. As for kernels, I first tried the 9.4.0 Modbin, which is a bit faster than the others, BUT has some problems with certain processes (IMAP-retrieving for instance) and offers NO SLEEP. Then I installed the 9.2.0 Sleep kernel with OSX86Tools and now everything works perfectly. A lot of programs do well: CS3, OpenOffice, Firefox, Thunderbird, etc. Apple Mail doesn't with IMAP. A lot of drivers do well: HP Photosmart, Canon EOS, others (Epson Scanner) needed to be tranferred manually from a different Leopard-System (Library/Application Support, Library/ColorSync/Profiles, Library/Image Capture and System/Library/Extensions). A problem are printers with a propriety postscript-module, like OKI laser printers. Installers won't work and I can't find any informations in the system. Any idea? Would be great... In the boot.ini of the XP partition, I added chain0 as second OS. If the XP partition is flagged to boot (G-Parted), you get to the Windows bootloader (where you choose between XP and OSX). If you choose XP, you get to XP. If you choose OSX, you get to the Darwin-Bootloader. If the OSX partition is flagged to boot, you get to the Darwin-Bootloader, where you can also chose which partition to boot from. (You can switch from one bootloader to the other for hours if you are bored...) |
|
|
|
|
Larry Wang
InsanelyMac Protégé
|
|
|
Sep 20 2008, 06:09 PM Post #269
|
|
Kalyway 10.5.2 DVD Intel/AMD.iso
Motherboard Manufacturer: MSI Motherboard Model: MSI 945GT Speedster-A4V CPU : Core Dual T2350 and T2600 Chipset: Intel 945GT BIOS Version: , Revision: v1.5 BIOS setup options: All defaults Audio: Don't install any from Kalyway 10.5.2 DVD, Install ALC888 from JaS OSX86 10.5.4 Client/Server Intel DVD. Work with back panel inputs and stereo output and SDIF support. Never check 5.1 and front panel audio. LAN: Works out of the box? Yes without any options installation SATA & IDE: Works out of the box? SATA yes and IDE never check. VIDEO : Select GMA950 option and working with QE/CI enable and resolution change. The VGA port does not have 16:10 monitor selection, only 4:3 monitor selection. The DVI port with DVI-VGA adaptor. It show all correct available resolutions. The DVI-D port. Not test yet. DVI-D and VGA dual port. Not test yet. 1394a Firewire : Yes Bluetooth Dongle : yes. USB : Yes. |
|
|
|
|
fatbacktaffy
InsanelyMac Protégé
|
|
|
Sep 21 2008, 05:07 PM Post #270
|
|
Current OS X Version: 10.5.2
Desktop/Laptop? Desktop Prebuilt? (Y/N) Y (If prebuilt then add following information, otherwise fill the Motherboard:) Manufacturer: (example Dell?) Model: (example Inspiron xxx?) Install Methods summary: (List all methods tested, check preferred method - the one you are writing about now) Does EFI and/or the Vanilla kernel work? (example: partitioned as MBR, EFI v8 + Vanilla Kernel) (in following sections, if you don't know or not sure, write "unknown") Motherboard Manufacturer: Asus Motherboard Model: Striker Extreme Chipset: nVIDIA nForce 680i SLI BIOS Version: , Revision: Phoenix - Award BIOS v6.00PG Version 1603 BIOS setup options: (example: SATA should be set as "native", "AHCI"; Processor - set EIST to "disabled") Audio: Works out of the box? If not, list patches. Yes audio works with the 3 default selections in the kalyway install + also works with my motu 828 mk2 firewire external soundcard + drivers LAN: Works out of the box? If not, list patches. Lan works out the box with RTL8139 PCI LAN Card (Loose internet connection all the time though) SATA & IDE: Works out of the box? If not, list patches. Yes sata and ide work out the box Processor Processor Model: Intel Core 2 Duo (Conroe) Speed: 2.4Ghz (Overclocked 3.0Hz) Recognized as what in System Profiler: Intel Core 2 Duo 3.0ghz Video Card (if you have integrated and PCI/AGP, use this template twice) What type of card (PCI Express/AGP/Integrated): PCI Express NVIDIA/ATI/Intel? NVIDIA Model: GeForce 8500GT Memory: 512MB Board Manufacturer: PNY Patches used: Standard 512MB Nvidia 0.2.0 patch that comes with kalyway QE/CI: Yes both work out the box + no flashing required All resolutions available? Yes (Before installing drivers my card shows as having 32mb mem and I get 1 res with no qe and ci but after drivers installation everything shows correctly. Other PCI/PCI-e Components (USB are listed in Other Accessories below) Wireless/Wired Card (for PCI/PCI-e cards only) Interface: PCI/PCI-e? Standard (Wireless only): (example: 801n) Manufacturer: Model: Works? (Y/N, if "Y", list patches) Patches: Other Accessories (USB/FIREWIRE) Type (Webcam, External Sound Card, USB bluetooth dongle, etc.): External soundcard Name: 828 MK2 Firewire Manufacturer: Motu Works? (Y/N, if "Y", list patches, if needed) Yes with manufacturers drivers Patches/Work out of the box? |
|
|
|
|
redrider218
InsanelyMac Protégé
|
|
|
Sep 23 2008, 08:34 PM Post #271
|
|
Current OS X Version: 10.5.2
Desktop/Laptop? Desktop Prebuilt? no (If prebuilt then add following information, otherwise fill the Motherboard:) Manufacturer: Gateway Model: (example Inspiron xxx?) Install Methods summary: Kalyway 10.5.1 10.5.2, Leo4all, iAtokis Does EFI and/or the Vanilla kernel work? (example: partitioned as MBR, EFI v8 + Vanilla Kernel) (in following sections, if you don't know or not sure, write "unknown") Motherboard: Intel (Monterrey) Motherboard - 1.7-GHz [Part #2513603] Manufacturer: Motherboard Model: Chipset: * Intel 82850 Memory Controller Hub (MCH) * Intel 82801BA I/O Controller Hub (ICH2) * Intel 82802AB 4 Mbit Firmware Hub (FWH) BIOS Version: , Revision:Intel/AMI BIOS (resident in the Intel 82802AB 4 Mbit FWH) BIOS setup options: (example: SATA should be set as "native", "AHCI"; Processor - set EIST to "disabled") Audio: Works out of the box? If not, list patches. LAN: Works out of the box? If not, list patches. SATA & IDE: .IDE RAM: 256 MB, 8 × 16, 400/133, RIMM PC800 Processor Processor Model:Intel® Pentium® 4 processor Speed:400 MHz system data bus Recognized as what in System Profiler: Video Card (if you have integrated and PCI/AGP, use this template twice) What type of card (PCI Express/AGP/Integrated):ATI Radeon VE graphics processing unit NVIDIA/ATI/Intel?ATI Radeon VE graphics processing unit Model: Memory:64MB high speed double data rate Board Manufacturer: Patches used: QE/CI: All resolutions available? Other PCI/PCI-e Components (USB are listed in Other Accessories below) Wireless/Wired Card (for PCI/PCI-e cards only) Interface: PCI/PCI-e? Standard (Wireless only): (example: 801n) Manufacturer: Model: Works? (Y/N, if "Y", list patches) Patches: Sound Card (this is for PCI/PCI-e cards only - integrated on motherboard is in motherboard section) Interface: PCI/PCI-e? Manufacturer: Model: Works? (Y/N, if "Y", list patches) Patches: Other Accessories (USB/FIREWIRE) Type (Webcam, External Sound Card, USB bluetooth dongle, etc.): Name: Manufacturer: Works? (Y/N, if "Y", list patches, if needed) Patches/Work out of the box? I can't get past the darwin bootloader screen it just keeps rebooting is my computer capable of running leopard? |
|
|
|
|
Zero128
InsanelyMac Protégé
|
|
|
Sep 27 2008, 06:49 AM Post #272
|
|
Laptop : Acer Aspire 5520
Processor : AMD Turion™ 64 Mobile Technology MK-38 Graphics Card : nVidia GeForce 7000M / nForce 610M HDD: Hitachi HTS542512K9SA00 ATA Device DVD: Optiarc DVD RW AD-7560A ATA Device |
|
|
|
|
SharkyNL
InsanelyMac Protégé
|
|
|
Sep 27 2008, 11:46 AM Post #273
|
|
Dell Optiplex 755 SFF
Install Method: Leo4Allv3 w/ Kernel 9.2.2, Azalia_ADI1988 (Audio), Intel ICHx (Chipset Drivers) and Nvinject 0.2.1 with 256mb Audio: works with Azalia_ADI1988 LAN: Installed Realtek RTL8139D PCI 10/100 card, onboard NIC not working Video: Installed a XFX Geforce 7300GS (Low-profile), onboard (GMA3100) works (but QE/CI both not work) Vanilla kernel: works Sleep, restart, shutdown works (If you want sleep working you have to go to the BIOS to set APCI Power Mode S1) Hello, I saw your reply on InsanelyMac and what you better can do with to get your printer working, is get the original Leopard disk and there you can do something called custum install to get the extra printer drivers in leopard for your OKI. QUOTE (georgeorange @ Sep 20 2008, 02:15 PM)  KALYWAY 10.5.2 (versus iDeneb 10.5.4 patched to v1.1)
on Desktop KALYWAY Install Method summary: - Win XP on a SATA drive prior to intall - bought a valid Leopard license ("because we really, really hate Microsoft") - OSX86 on additional IDE, as SATA not recognized during install - partitioned as MBR - Sleep Kernel used - NO EFI, since XP Bootloader - after install, XP partition re-set active with G-Parted, two partitions are now active, one on SATA (XP), one on IDE (OSX), then added chain0 to the boot.ini menu, boot menu now shows Win XP and Mac OSX and boots into both Motherboard Manufacturer: MSI Motherboard Model: K9N SLI MCP Chipset: NVIDIA nForce 570 BIOS updated BIOS setup options: SATA cannot be set "native", no "AHCI", therefore IDE install Audio: Realtek ALC883, works out of the box LAN: onboard nForce DOES NOT WORK with any of the 3 available forcedeth.kexts SATA & IDE: fine after istall Processor Processor Model: AMD Athlon 64 X2 3800+ Recognized as what in System Profiler: 2.01 GHz Unknown, but much faster in reality Video Card PCI Express NVIDIA Model: GeForce 7300 GT Memory: 256 MB All resolutions available, but fonts not very sharp, OSX issue though Other USB devices, like printers, scanners etc.: All installers DO NOT WORK, because they don't recognize the platform, I suppose. THEN I tried IDeneb 10.5.4, patched to V 1.1: This time, the SATA disk was recognized and a partition was able to be used for installation! A problem was still the OnBoard NForce Ethernet Controller, who wouldn't run with any of the three different nforcekext versions currently available. But a cheap Realtek 8139 Ethernet Controller is supported by iDeneb v1.1. As for kernels, I first tried the 9.4.0 Modbin, which is a bit faster than the others, BUT has some problems with certain processes (IMAP-retrieving for instance) and offers NO SLEEP. Then I installed the 9.2.0 Sleep kernel with OSX86Tools and now everything works perfectly. A lot of programs do well: CS3, OpenOffice, Firefox, Thunderbird, etc. Apple Mail doesn't with IMAP. A lot of drivers do well: HP Photosmart, Canon EOS, others (Epson Scanner) needed to be tranferred manually from a different Leopard-System (Library/Application Support, Library/ColorSync/Profiles, Library/Image Capture and System/Library/Extensions). A problem are printers with a propriety postscript-module, like OKI laser printers. Installers won't work and I can't find any informations in the system. Any idea? Would be great... In the boot.ini of the XP partition, I added chain0 as second OS. If the XP partition is flagged to boot (G-Parted), you get to the Windows bootloader (where you choose between XP and OSX). If you choose XP, you get to XP. If you choose OSX, you get to the Darwin-Bootloader. If the OSX partition is flagged to boot, you get to the Darwin-Bootloader, where you can also chose which partition to boot from. (You can switch from one bootloader to the other for hours if you are bored...) |
|
|
|
|
software123
InsanelyMac Protégé
|
|
|
Sep 27 2008, 01:54 PM Post #274
|
|
Current OS X Version: 10.5.2 Kalway
speedstep kernel Motherboard Manufacturer: MSI Motherboard Model: K8M800 Chipset: 8237 Memory: 1 GB Audio: Realtek AC 97 (1 channel working) LAN: Via Rhine II (working with Via Rhine Kext) SATA & IDE: (working no patch needed) Processor Processor Model: AMD Athlon 2800+ Speed: 1.8 Ghz Video Card Onboard : Via Unichrome 64 MB (tested & not fully working) now added AGP Card: Nvidia FX5200 256 MB (works out of the box with) http://forum.insanelymac.com/index.php?sho...&hl=fx+5200 QE/CI: not tested All resolutions available: Yes |
|
|
|
|
cas27
InsanelyMac Protégé
|
|
|
Sep 29 2008, 12:57 PM Post #275
|
|
Wolfdale 1333-667 R2.0
Leo4All 10.5.2 V3 Combo update 10.5.5 (Netkas) Motherboard Manufacturer: AsRock Motherboard Model: Wolfdale 1333-667 R2.0 Chipset: Intel 945GC A2, needs ICHx chipset patch from DVD. BIOS Version: (BIOS from Wolfdale 1333-667 R1.0) V1.5 modded BIOS by Kabyl. Thank you! BIOS setup options: Default + Speedstep Audio: Works with AzaliaAudio from DVD. LAN: OOB SATA & IDE: OOB (IDE DVD + 2 SATA HD, one for XP one for OSX) Processor Processor Model: E5200 Speed: 2,5 GHz running @ 3GHz Video Card What type of card: Integrated Intel Graphics Media Accelerator 950 Board Manufacturer: AsRock onboard Patches used: None! Works OOB Working at 1920x1200 @ 60 Hz Note: Before using 10.5.5 combo update save all .kext files for GMA950 and framebuffer. Reinstall them after updating to have all resolutions. PS2 only works with patch (I think i used ps2nubs). |
|
|
|
|
SPL15
InsanelyMac Protégé
|
|
|
Sep 29 2008, 10:36 PM Post #276
|
|
First Post and from My 95% working Hackle. Thank you to all the people generous enough with their time to make this possible to those without the skills.
Kalyway 10.5.2 CPU: Intel Q6600 Overclocked to 3.7Ghz Motherboard: DFI Lanparty UT P35-T2R (Details Below on Compatibility) P35 Chipset ICH9R Memory: 4GB (2x2GB DDR1066) Graphics Processor: EVGA nVidia 8800GTX V'Modded BIOS OC'd to 725Mhz GPU, 1720 Mhz Shader, 1100DDR Mem Sound: ALC885 (onboard Audio Works with AppleHDApatcher ver 1.20 with ALC885 Code dump Ethernet: Marvell 88E8053 (onboard MUST use 2nd Ethernet port for OOB compatibility) Monitor: LG 56" DLP HDTV 1280x720 res. (some underscan needs to be fixed) The motherboard works fine with the vanilla kernal in Kalyway 10.5.2. However, the ONLY issue is Audio which is easily patched and the shut down, restart, sleep. osX shuts down and exits and turns off all the hardware & peripherals, but does not shut down completely or doesnt reboot or it sleeps fully but does not wake. Also, the fan's do not respond to the BIOS temperature settings so I set them on high to be safe. I use watercooling so not a big deal for me, but others will need to work around this. Graphics work perfect. CI & QE work fully, no tearing or other weird artifacts. I'm 100% new to apple operating systems. I'm certified in many microsoft certification programs and a pro at anything microsoft and programming, but never had an interest in osX due to the liberal hype behind the company. I've been messing around and learning the commands in terminal and so far I can say I will probably buy a real Mac in the future and i'm glad I gave osX a chance. I wouldnt say osX is better than Vista or the other way around, just different and they focus in on different aspects of useability. Apple seams more focused on content creation type of work, Microsoft more productivity & entertainment & gaming of course. Hmm... Left brain Apple, Right brain Microsoft I say, they both have a place in strengths none is better than the other in total though. Just my opinion though. Thanks to all |
|
|
|
|
birhunter_99
InsanelyMac Protégé
|
|
|
Oct 1 2008, 02:29 PM Post #277
|
|
GigaByte EP45-DS3 runs very well..
everything onboard is compatible, Audio runs with Chamelion-Efi |
|
|
|
|
boorok
InsanelyMac Protégé
|
|
|
Oct 1 2008, 04:33 PM Post #278
|
|
Desktop
Install Methods: Zephyroth's OSX 10.5.2 rev.1 - Successfully installed (Partitioned as MBR) Kalyway OSX 10.5.2 - Successfully installed (but unable to boot after restart) Leo4all AMD - Did not work for me! (no installation screen showed up) Motherboard Manufacturer:AsRock Motherboard Model:AliveXfire eSata2 rev. 1 Chipset: - Northbridge: AMD 480X CrossFire™ - Southbridge: ATI™ SB600 BIOS Version: 2.70 , Revision: Unknown BIOS setup options: boot option set to be from USB HDD (I did not try it with S-ATA or IDE HDD) Audio: Works after insatlling AzaliaAudio driver (alternatively search for ALC662 driver) LAN: Works fine out of the box SATA & IDE: Not tested (USB HDD works) Processor Processor Model: AMD Athlon 64 X2 3800+ Speed: 2GHz (only one core recognized) Recognized as: AMD Athlon™ 64 X2 Dual Core Processor 3800+ Graphics Card: ATI Radeon Model: X1300 Pro Memory: 256 MB GDDR3 Board Manufacturer: Gigabyte Patches used: NatitX1300 installer QE - Supported CI -Hardware Accelerated (Whatever that means) All resolutions available |
|
|
|
|
-King-
InsanelyMac Protégé
|
|
|
Oct 3 2008, 01:03 AM Post #279
|
|
Maybe Someone Can give me a hand here, I have used Kalyway 10.5.2 upgraded to 10.5.3, and then to 10.5.5 now im trying Ideneb 10.5.5, but i cant find the cause of my problem.
I can install both with ease, but the problem im having is that when i try and run applications such as Parallels or VMware Fusion or Crossover, i constantly get Hard Resets, every once in awhile something else will give them to me, and im looking to find what i can do to fix the issue, below are my specs, any insight would be great. please let me know what i could be missing. Thanks Processor Name: Intel® Core™2 Quad CPU Q6600 @ Processor Speed: 2.4 GHz Total Number Of Cores: 4 L2 Cache (per processor): 4 MB CPU Features: FPU VME DE PSE TSC MSR PAE MCE CX8 APIC SEP MTRR PGE MCA CMOV PAT PSE36 CLFSH DS ACPI MMX FXSR SSE SSE2 SS HTT TM SSE3 MON DSCPL VMX EST TM2 SSSE3 CX16 TPR PDCM Memory: 4 GB Bus Speed: 1.07 GHz Boot ROM Version: BOOT.88Z.EFI.V80.061193037 (American Megatrends Inc.) Serial Number: CK157KMHK5B My motherboard is an Asus Maximus Extreme, my video card is an Geforce 8800GTX 768mb 
|
|
|
|
|
Stbradle
InsanelyMac Protégé
|
|
|
Oct 3 2008, 05:13 PM Post #280
|
|
Current OS X Version: 10.5.2
Desktop/Laptop? - Desktop Prebuilt? No Install Methods summary: Leo4all v3 Does EFI and/or the Vanilla kernel work? partitioned as MBR, EFI v8 + Vanilla Kernel 9.2.2 Motherboard Manufacturer: ASUS Motherboard Model: P5E64 EVOLUTION Chipset: X48 BIOS Version: 0506 BIOS setup options: SATA should be set to AHCI Audio: Needs patching, Taruga AD888B installer v4 LAN: Works out of the box SATA & IDE: Works out of the box Processor Processor Model: Q9550 Speed: 2.83 Ghz Recognized as what in System Profiler: Q9550 Quad, 4 cores, 2.83 GHz Video Card What type of card - PCI Express 2.0 NVIDIA Model: 9800 GTX+ Memory: 512mb Board Manufacturer: EVGA Patches used: 9800 GTX patch, NVinject, and permissions command http://forum.insanelymac.com/index.php?sho...amp;hl=9800+GTX QE/CI:unknown All resolutions available - YES Other PCI/PCI-e Components All Working OOB SYBA PCI-Express 1394a FireWire 4 ports Controller Card Model SD-PEX-NEC4F Wireless/Wired Card Linksys Wireless G Interface: PCI Standard (Wireless only): 802.11g Manufacturer: Linksys Model:WMP54GS Works- OOB Patches:na Sound Card Interface: PCI Manufacturer:Creative Model:X-Fi XtremeMusic Works? No Patches:Unknown Other Accessories Yamaha i88x firewire interface Works OOB after Taruga AD888B installer v4
Attached File(s)
|
|
|
|
| |
|
Lo-Fi Version | Time is now: 22nd November 2009 - 01:48 AM |
