Hardware Compatibility List - Leopard 10.5.2, ONLY post if you're not comfortable posting in the Wiki directly Options

[Mebster]

We're looking to update the Leopard 10.5.2 HCL in the Wiki and so we need all our members who've successfully installed 10.5.1 on their systems to submit their systems details. The Wiki is the first stop for members when they look to install OS X on their PCs and so it's incredibly important that it be as extensive as possible, and that can only happen with your help. To find out the details of your system in OS X you can use (anyone care to recommend something)...and in Windows you can use Everest. To visit the Wiki click on OSx86 Project on the top right of every InsanelyMac page.

To make it easier to enter your system specifications, it's important that the template below is used when submitting. Simply copy/paste it all and fill in the relevant areas.

• State what is and is not supported with you hackintosh. If patching was required to get something working, please provide a link to the topic you used, so it may help others with similar systems.
• As tempting as it maybe please refrain from asking questions regarding other members systems. This is not the place for this! If you need to ask a question then use the relevant forum or PM the member directly. Posts distracting from the purpose of this topic will be removed.

Current OS X Version: 10.5.2

Desktop/Laptop?

Prebuilt? (Y/N)
(If prebuilt then add following information, otherwise fill the Motherboard:)
Manufacturer: (example Dell?)
Model: (example Inspiron xxx?)

Install Methods summary: (List all methods tested, check preferred method - the one you are writing about now)

Does EFI and/or the Vanilla kernel work? (example: partitioned as MBR, EFI v8 + Vanilla Kernel)

(in following sections, if you don't know or not sure, write "unknown")
Motherboard
Manufacturer:
Motherboard Model:
Chipset:
BIOS Version: , Revision:
BIOS setup options: (example: SATA should be set as "native", "AHCI"; Processor - set EIST to "disabled")
Audio: Works out of the box? If not, list patches.
LAN: Works out of the box? If not, list patches.
SATA & IDE: Works out of the box? If not, list patches.

Processor
Processor Model:
Speed:
Recognized as what in System Profiler:

Video Card (if you have integrated and PCI/AGP, use this template twice)
What type of card (PCI Express/AGP/Integrated):
NVIDIA/ATI/Intel?
Model:
Memory:
Board Manufacturer:
Patches used:
QE/CI:
All resolutions available?

Other PCI/PCI-e Components (USB are listed in Other Accessories below)
Wireless/Wired Card (for PCI/PCI-e cards only)
Interface: PCI/PCI-e?
Standard (Wireless only): (example: 801n)
Manufacturer:
Model:
Works? (Y/N, if "Y", list patches)
Patches:

Sound Card (this is for PCI/PCI-e cards only - integrated on motherboard is in motherboard section)
Interface: PCI/PCI-e?
Manufacturer:
Model:
Works? (Y/N, if "Y", list patches)
Patches:

Other Accessories (USB/FIREWIRE)
Type (Webcam, External Sound Card, USB bluetooth dongle, etc.):
Name:
Manufacturer:
Works? (Y/N, if "Y", list patches, if needed)
Patches/Work out of the box?

If you have any questions regarding the Leopard HCL, then please contact the Wiki Team.

~Posts which have been used to update the Leopard HCL shall be deleted to help the members updating the HCL better manage the task~

.

Important Note:

The Wiki is now open to the public so if members wish they may go there directly and enter their details. Please remember to fill in the Computer/Laptop sections if your system is a prebuilt one as well as the Components section.
Also if you've already inputted your details in the Wiki then you should not also post them in this thread! It will only be deleted and causes the process of updating the wiki from here to slow down.

[skyhighmac]

Introduction
Ok guys. It seems we're getting a lot of people who are for some reason or another posting in HCL threads like these. That's absolutely fine if you're not comfortable with entering data in the wiki but if you are comfortable editing the wiki then please don't post your details here also. So to help those confused when it comes to adding your stuff to the wiki I will show you how you can add in your info correctly.

Lets start from the beginning. How to get to the wiki. You have to click on the "OSx86 Project" text on the top right corner of any InsanelyMac page. I am currently logged in, so if you aren’t logged in or don’t have an account, you will need to take care of that now. You are required to have an account to edit the wiki!

Then scroll down the page, and find the Hardware section.

Then you will need to find your version, whether it be 10.5.1, 10.5.2, and so on. Then, click on either Components, Portable Computers or Desktop Computers. The Desktop Computers page is only for pre-built desktops from the manufacturer, not ones you build yourself. Obviously Laptops are prebuilt ones too.

I’ll now cover how to add info to each of the three sections: Components, Portable Computers and Desktop Computers.


Components
-Motherboard
We are going to start with adding your motherboard. Using the nice little contents list, find and click on your manufacturer. Across from the name, click the [edit] button.

Then you will be shown some code. Everything is organized by chipset, and then alphabetically in the motherboard section. I recommend having another tab/window open so you know where you should insert you system. To insert your system in the appropriate place use this code: (The red text is text you should replace with your actual information)

CODE

|- < Make sure this is at the beginning and end of your system, no need for two, just one
|Motherboard Model
|Chipset (Northbridge & Southbridge)
|
* Install Method:
* BIOS Version:; Revision:
* Audio: Model, List any patches used (including ones from the install DVD)
* LAN: Model, List any patches used (including ones from the install DVD)
* SATA & IDE: Does SATA work? Any options in BIOS or Patches? Same thing with IDE
* Optical Drive: Which one? Any weird problems with installation?
* Do shutdown, reboot and sleep work?
* Any other details
|Does PC-EFI and/or the Vanilla Kernel work on your system?
|Does everything work without patching? If no, say what needs patching
|- < Make sure this is at the beginning and end of your system, no need for two, just one

If you haven’t tested a feature, then write “Not Tested”
If you are just to lazy to find out, write “Unknown”

Click “Show Preview “ to make sure you did everything right, then enter the CAPTCHA (the letters from the image) and then click “Save Page”

-Processor
Now we will add your processor. The processor sections are again, organized by model. Pentiums, then Core 2 Duo, C2 Quads, C2Es and Xeons, (Same kind of thing with the AMD section) Again follow the code, replace the red with your info:

CODE

|- < Make sure this is at the beginning and end of your system, no need for two, just one
|Your processor manufacturer, series, then model. An example: Intel Core 2 Duo E4300
|Anything special selected at install? Does it work right? If so, put “Fully Working”
|What does system profiler see your processor as?
|Is it fully working without any patches? (Put Vanilla Kernel right here if it works, if not tested, just don't add)
|- < Make sure this is at the beginning and end of your system, no need for two, just one

Again, click “Show Preview “ to make sure you did everything right, then enter the CAPTCHA (the letters from the image) and then click “Save Page”

-Video Card
Now to the video card. This section, is firstly ordered by series. Again follow the code, replace the red with your info:

CODE

|- < Make sure this is at the beginning and end of your system, no need for two, just one
|Your Board Model & Memory. ex. GeForce 8800GT 512MB
|Board Manufacturer ex. EVGA
|Patches Used, if any. If none needed, write “No Patch Needed”
|Do QE and CI work?
|Can you change resolutions?
|Does it fully work without patches?
|- < Make sure this is at the beginning and end of your system, no need for two, just one

Again, click “Show Preview “ to make sure you did everything right, then enter the CAPTCHA (the letters from the image) and then click “Save Page”

Woila! Please read the Conclusion as well!


Portable Computers
Find your manufacturer, then click [edit]. Remember, keep it alphabetized. Here is the code for laptops, again, replace the red text with your info:

CODE

=== Your Model, ex. Latitude D530 ===

* Install Method:
* Chipset: (Northbridge & Southbridge)
* Processor:
* Audio: Model, List any patches used (including ones from the install DVD)
* LAN: Model, List any patches used (including ones from the install DVD)
* Video: Model
* SATA & IDE: Does SATA work? Any options in BIOS or Patches? Same thing with IDE
* Any other details, specific install requirements, etc.
* How to install: (If anything major, not the basics)
*# < Use this for indent for the How To Install

Click “Show Preview “ to make sure you did everything right, then enter the CAPTCHA (the letters from the image) and then click “Save Page”

Woila! Please read the Conclusion as well!


Desktop Computers
Find your manufacturer, then click [edit]. Remember, keep it alphabetized. Here is the code for desktops, again, replace the red text with your info:

CODE

=== Your Model, ex. Dimension 300 ===

Install Method:
Board:
Chipset: (Northbridge & Southbridge)
Processor:
* Audio: Model, List any patches used (including ones from the install DVD)
* LAN: Model, List any patches used (including ones from the install DVD)
* SATA & IDE: Does SATA work? Any options in BIOS or Patches? Same thing with IDE
* Any other details, specific install requirements, etc.
* How to install: (If anything major, not the basics)
*# < Use this for indent for the How To Install

Click “Show Preview “ to make sure you did everything right, then enter the CAPTCHA (the letters from the image) and then click “Save Page”

Woila! Please read the Conclusion as well!


Conclusion
There you go, if you have any questions feel free to pm me, any of the other Wiki Staff members or a Moderator. Please don’t delete anything like the table headers. Thank you!

If you don’t get it just add it to the HCL Thread using the template provided in the first post and we will take care of it! It really isn’t as hard as it looks! Just read and follow my instructions!

Also, If you find that your system/parts are already in the wiki, and something is different in your install (Kalyway vs. iATKOS) just add your install method to the install method piece, and then at the bottom of the notes, just add something like this:

CODE

Kalyway:
Audio:
etc.....

[copperboy]

Current OS X Version: 10.5.2
Install method: iATKOS v1.0r2 + Kalyway 10.5.2 update + Stock kernel from Kalyway mpkg, EFI working? --Yes

Prebuilt? --No

Motherboard
Manufacturer: MSI
Model: 945GCM5-F V2
Version: 2.0
Bios Version: H00, doens't work with the latest H70 BIOS
Chipset: Intel 945GC
Audio: working? -- Yes patches? -- No. There is no audio option for iATKOS v1.0r2, but only 2-channel output, no line in, no mic in.
LAN: working? -- Yes patches? -- No.
Required patches etc? -- No.

CPU
Model Number: pentium E2160
Recognised as: 1.80 GHZ Core 2 Duo

Memory/DDR: 2GB DDR2 (2x1GB Samsung)

Video
Manufacturer: Onda
Model: nVidia GeForce 7300GT with 256MB GDDR3
Bus Type: PCI Express 16X
Memory size: 256MB GDDR3
Dual screen working? --haven't tried.
QE/CI working? --Yes Resolution changeable? -- Yes.
Required patches or bios flashing? -- Natit Dual 0.2, no BIOS flashing needed.

SATA/IDE working: Both works.

Wifi & patches? -- No. BCM4306 works out of the box.
other peripherals/pci addon cards? No.

misc hardware: Apple Keyboard Pro, Logictech G3 laser mouse.

[MixUnix]

Current OS X Version: 10.5.2

Desktop/Laptop?
Desktop MiniPC

Prebuilt?
Yes

Manufacturer: (example Dell?)
Shuttle

Model: (example Inspiron xxx?)
SB61G2

Processor
Pentium 4 2.8 HT
2.8 Unknown

Video Card (if you have integrated and PCI/AGP, use this template twice)
NVidia AGP 8x GeForce 6200A 256Mo

What type of card (PCI Express/AGP/Integrated):
AGP
NVIDIA/ATI/Intel?
NVIDIA

Model:
GeForce 6200A

Memory:
256Mo

Board Manufacturer:

Patches used:
NVinject 0.13

QE/CI:
Yes,Yes

All resolutions available?
Yes 2 Monitors

Other PCI/PCI-e Components (USB are listed in Other Accessories below)

Wireless/Wired Card (for PCI/PCI-e cards only)

Interface: PCI/PCI-e?

Standard (Wireless only): (example: 801n)


Manufacturer:


Model:


Works? (Y/N, if "Y", list patches)

Patches:


Sound Card (this is for PCI/PCI-e cards only - integrated on motherboard is in motherboard section)
Interface: PCI/PCI-e?
Integrated
Manufacturer:
AC97

Model:
AC97
Works? (Y/N, if "Y", list patches)
Yes

Patches:
Garageband with Jack Server
Other Accessories (USB/FIREWIRE)
Type (Webcam, External Sound Card, USB bluetooth dongle, etc.):
USB WiFi Bluestork Zydas chip
Name:
B-S-USB
Manufacturer:
Bluestork

Works? (Y/N, if "Y", list patches, if needed)
Yes with original OSX driver

Patches/Work out of the box?
Zydas driver OOB

[incitatus]

Current OS X Version: 10.5.2
Desktop Prebuilt? (No)
Install Methods summary: Zephyroth 10.5.2
Step 1: Formatted IDE 40GB HD to fat32
Step 2: Installed Zephyroth 10.5.2 w/ ToH 9.2 kernel
Step 3: rebooted with -v -s "Graphics Mode"="640x480x32"


Motherboard
Motherboard Manufacturer: ECS
Motherboard Model: K8M890-M
BIOS Version: AmeriTrend
BIOS setup options: AHCI enabled
Audio: Working 100% (mic, line in, surround etc) with provided ALC97 Patch
LAN: ??
WLAN: WUSB54G... working!! yay! patched with prasys modified rt2500usbwirelessdriver.
SATA: yes
IDE: yes


Processor
Processor: AMD64 X2 AM2 4200+
Recognized in System Profiler as: Unknown 2.2Ghz


Video Card
Type of card: PCI Express
Model: (ATI) Sapphire x1650 Pro 256MB
works, but not fully recognized, no FR, only 1024x768
All resolutions available ?: Yes

Other Components
Memory: 2GB (Fully Working)
DVD Drive: NEC DVD_RW ND-4551A (Working, write not tested)
Hard Drives: Internal IDE 40GB WD (Root) and Internal 160GB Seagate (SATA)
Keyboard: Apple Standard USB
Mouse: Logitech Generic USB

Sleep(Not tested) Shutdown(Works) Reboot (Works)
System Profiler working correctly.

no boot parameters necessary, triple boot using grub and efi_v8
tried to configure WUSB54G wireless usb, no workie...

[Nifty]

Current OS X Version: 10.5.2
Install method: KALYWAY 10.5.1 -> 10.5.2 Combo Update -> 9.2.0 Vanilla Kernel
Type: Laptop
Model: SONY VAIO VGN-SZ3XRP/C
CPU: Core 2 Duo 2GHz
Memory/DDR: 2Gb (2x1Gb PC2-5300)
Motherboard Chipset: i945GM
SATA: Work, no patches required
USB: Work, no patches required
Audio: Work, Apple HDA Patcher 1.2 + audio codec dump from Ubuntu linux (CXD9872RD)
LAN: Work, change device ID in AppleYukon.kext and manually load this extension (Marvell Yukon Fast Ethernet 8036)
WiFi: No (Intel 3945abg)
Bluetooth: Work, no patches required
FireWire: Work, no patches required
Express Card: Work, no patches required
Video Primary:
Manufacturer: nVIDIA
Model: GeForce 7400Go
Bus Type: PCIe x16
Memory size: 256Mb
QE/CI working: No, after installing NVinject or any other solutions LCD screen is unreadable
Resolution changeable: No (1024x768x32 max)
Video Secondary:
Manufacturer: Intel
Model: GMA950
Bus Type: onboard
Memory size: 64Mb
QE/CI working: Yes, no patches required. Dont install Apple graphics update!!!
Resolution changeable: Yes, custom display profile required for 1280x800 mode (custom EDID created in "Phoenix EDID")

[meansizzler]

Some Hardware..

Bluetooth Adapter

Type: USB2.0 Bluetooth 2.0

Model: Asus BTD201M

Works Natively in 10.5.1, 10.5.2, detected straight away, no drivers needed


Graphics Card

Type: PCI Express Nvidia

Model: PNY 7600GT 256MB

Works using Nvinject in 10.51, and 10.5.2, , tested with Kalyway 10.5.1, all resolutions, QE/CI


Wireless Network Card

Type: PCI B/G/N 300Mb/s

Model: Sitecom 300N

Uses Ralink RT2860 Chipset, so get drivers from their website, drivers come with ralink wireless connect utility, works in 10.5.1, 10.5.2

http://www.ralinktech.com.tw/data/drivers/..._2007_11_26.dmg


TV Tuner

Type: USB 2.0 DVB-T/Freeview

Model: Terratec Cinergy T2

Works in 10.5.1, 10.5.2 with Elgato Eye TV 3 Sofware which includes driver


TV Tuner

Type: USB 2.0 DVB-T/Freeview

Model: Hauppauge Nova - TD

Works in 10.5.1, 10.5.2 with Elgato Eye TV 3 Sofware which includes driver


Card Reader

Type: USB 2.0 Internal SDHC

Model: Lian-Li CR-35A 50

Works out of the Box in 10.5.2, driver on install disc, can use if you want but works either way, should work on 10.4.6 and above to

[ka911]

***quick question***
do we need to make it to specific release as will? I mean we do have now Leopard 10.5.2 ver2
with me I can't have my sound and video to work with ver1 but with ver2 I have this two work out of box!

[jkspost]

If you want to you can add Line6 Toneport UX8 to 10.5.x HCL - Just install the driver/software from their website.

I think it's safe to add all Line6 Toneport's in general as they all use the samme driver/software. One little tip which solved my problems with occasionally audio drop outs when playing music in iTunes etc., is try to raise the voltage a little bit (+0.03V) on the motherboard. I had to do this with my GA-P35-DS3L to be able to completely get rid of problems with USB devices. Both in OS X and Windows.


Also Frontier Design Alphatrack works as it should with Cubase 4 and Logic 8 in OS X with the driver/software from the manufactures website.

[Hakemon]

Current OS X Version: 10.5.2

Desktop/Laptop? Desktop

Prebuilt? (Y/N) Yes
Manufacturer: IBM
Model: ThinkCentre M52 (8113-DCU)

Install Methods summary: Just pop disc in and install, worked great.

Does EFI and/or the Vanilla kernel work? EFI works, but not the Vanilla kernel.

Motherboard
Manufacturer: IBM
Motherboard Model: ThinkCentre M52 (8113-DCU)
Chipset: Intel 945G
BIOS Version: Pheonix , Revision: Unknown
BIOS setup options: Default settings, with following mods: NX Bit Enable (works without though)
Audio: No sound
LAN: Yes
SATA & IDE: Yes

Processor
Processor Model: Intel Pentium 4 HT Prescott (630)
Speed: 3GHz
Recognized as what in System Profiler: 3GHz Unknown, with 1MB L2 Cache (even though it has 2MB cache.. only a cosmetic glitch though)

Video Card
What type of card (PCI Express/AGP/Integrated): Integrated
NVIDIA/ATI/Intel? Intel
Model: GMA 950
Memory: 64MB
Board Manufacturer: IBM
Patches used: Non
QE/CI: Yes, both
All resolutions available? Yes
Note: Do NOT run the Leopard Graphics Update! You will get stuck with a blue screen at boot!

Other PCI/PCI-e Components (USB are listed in Other Accessories below)
Wireless/Wired Card (for PCI/PCI-e cards only)
Interface: PCI/PCI-e?
Standard (Wireless only): (example: 801n)
Manufacturer:
Model:
Works? (Y/N, if "Y", list patches)
Patches:

Sound Card (this is for PCI/PCI-e cards only - integrated on motherboard is in motherboard section)
Interface: PCI/PCI-e? PCI
Manufacturer: Creative Labs
Model: Sound Blaster Audigy 2 ZS
Works? (Y/N, if "Y", list patches) No, but the Firewire port does.
Patches: None

Other Accessories (USB/FIREWIRE)
Type (Webcam, External Sound Card, USB bluetooth dongle, etc.):
Name:
Manufacturer:
Works? (Y/N, if "Y", list patches, if needed)
Patches/Work out of the box?

[XpLoDiuM]

Current OS X Version: 10.5.2 (LEO4ALL)

Desktop/Laptop? Desktop

Prebuilt? (Y/N) N
Manufacturer: -
Model: -

Install Methods summary: Just pop disc in and install, worked great(Had to select the ICH FIX)

Does EFI and/or the Vanilla kernel work? Both Work.

Motherboard
Manufacturer: Gigabyte
Motherboard Model: G33-DS3R
Chipset: G33
BIOS Version: Pheonix , Revision: Unknown
BIOS setup options: Default settings
Audio: Azalia Codec
LAN: Yes
SATA & IDE: Yes

Processor
Processor Model: Intel Core2Duo E6750
Speed: 3.52GHz
Recognized as what in System Profiler: 3.52GHz Intel Core2Duo, with 2MB L2 Cache.

Video Card
What type of card (PCI Express/AGP/Integrated): PCI-E
NVIDIA/ATI/Intel? NVIDIA
Model: 8800GTS(G92)
Memory: 512MB
Board Manufacturer: Sparkle
Patches used: Non
QE/CI: Yes, both
All resolutions available? Yes
Note: Do NOT run the Leopard Graphics Update! You will get stuck with a blue screen at boot!

Other PCI/PCI-e Components (USB are listed in Other Accessories below)
Wireless/Wired Card (for PCI/PCI-e cards only)
Interface: PCI/PCI-e?
Standard (Wireless only): (example: 801n)
Manufacturer:
Model:
Works? (Y/N, if "Y", list patches)
Patches:

Sound Card (this is for PCI/PCI-e cards only - integrated on motherboard is in motherboard section)
Interface: PCI/PCI-e? PCI
Manufacturer: Creative Labs
Model: Sound Blaster Audigy 4
Works? (Y/N, if "Y", list patches) No
Patches: None

Other Accessories (USB/FIREWIRE)
Type (Webcam, External Sound Card, USB bluetooth dongle, etc.):
Name:
Manufacturer:
Works? (Y/N, if "Y", list patches, if needed)
Patches/Work out of the box?

[FilipeMB]

Desktop
Prebuilt? No

Install Methods summary: iAtkoS. With and without EFI worked.

Does EFI and/or the Vanilla kernel work? Only EFI. Vanilla kernel gives panic.,

Motherboard
Motherboard: Gigabyte GA 945 GZM-S2
Manufacturer: Gigabye
Motherboard Model: 945 GZM-S2
Chipset: Intel 945GZ+ ICH7
BIOS Version: , Revision: rev 6.6
BIOS setup options: (example: SATA should be set as "native", "AHCI"; Processor - set EIST to "disabled"): same configuration as used for win, linux
Audio: Works out of the box? Yes
LAN: Works out of the box? Yes
SATA & IDE: Works out of the box? Yes

Processor:
Processor Model: Intel Core 2 Duo
Speed: 1.8 gHz
Recognized as what in System Profiler: Intel® Core™2 CPU 4300 @

Video Card:
What type of card (PCI Express/AGP/Integrated): PCIe
Model: NVIDIA GeForce 7300 SE
Memory: 256MB
Board Manufacturer: NVIDIA
Patches used: nInject for 256MB cards
QE/CI: unknown
All resolutions available? til 1280x1024 @ 60hz

[swimfan]

Current OS X Version: 10.5.2

Desktop

Prebuilt? No


Install Methods summary: Kalyway install disc. using "-v -x -f cpus=1" was the only way i got it to install.

Does EFI and/or the Vanilla kernel work? yes, EFI and Vanilla

(in following sections, if you don't know or not sure, write "unknown")
Motherboard
Manufacturer: ASUS
Motherboard Model: P5k (plain)
Audio: No audio. Griffin iMic works amazing though.
LAN: No LAN, bought gigabit realtek card.
SATA & IDE: All 4 SATA ports working and IDE DVD drive. Can't rip DVD's with handbrake though. Get a scrambled screen. Everything else DVD related seems to work though.

Processor
Processor Model: Core 2 Quad Q6600
Speed: 2.4
Recognized as what in System Profiler: 2.4


NVIDIA/ATI/Intel? Nvidia 7300gt
Model:7300gt
Memory: 256mb
Board Manufacturer: evga
Patches used:nvinstaller
QE/CI:yes and yes
All resolutions available? yes
Apple 20" cinema display (old clear casing model)
NOTE: get a blank screen for about 2 mins on every bootup, but then works fine.


USB and firewire work fine. have 3 500gb western digital hard drives hooked up via USB.

NOTES ON EXPERIENCE:

Installation was hell until i finally fell upon the "-v -x -f cpus=1" string to get the install disc booted. i kept getting kernal panics when the installation began. Video cards were hell until i finally did what i should have done from the beginning and got a 7300gt. Tried 8600gt and ATI 2600 pro (not HD), none of them worked. Realtek gigabit lan was a breeze. The p5k board has worked flawlessly since i figured out the quirks. Having all the SATA ports working is nice also. Have an SATA ASUS dvd burner and an IDE samsung dvd burner and both work fine.

[exman]

Current OS X Version: 10.5.2

Desktop
Prebuilt? N
Install Methods summary:

-BIOS settings = Enable AHCI. S3 power management. Only these settings are important. Disable everything including Vanderpool, Speedstep, C1E etc.
-Boot with Kalyway 10.5.1. Don't use -v option. Wait 20mins for DVD to load.
-Install WITHOUT (untick) Vanilla kernel, nvidia, Audio, Wifi etc. Tick ONLY "GUID" or "MBR". OS X should install within 20mins again.
- Apply Kalyway 10.5.2 Combo update
- Apply this Kernel update: http://torrents.thepiratebay.org/4024497/1...497.TPB.torrent
- Install Wifi driver here: ftp://210.51.181.211/cn/wlan/87_Mac10.4_v1309.zip
- Install ALDI198B driver from the Kalyway DVD
- Install nvidia drivers here: http://scottdangel.com/blog/?page_id=20

Does EFI and/or the Vanilla kernel work? Use default Sleep Kernel from Kalyway DVD. Vanilla crashes. Update to 10.5.2 Kernel afterwards.

(in following sections, if you don't know or not sure, write "unknown")
Motherboard
Manufacturer: Asus P5K-E Wifi
Chipset: P35
BIOS Version: 1006
BIOS setup options: SATA = AHCI. Power = S3. Everything else Disabled under "CPU Configuration".
Audio: Works. Stereo.
LAN: Works out of box.
SATA & IDE: Works out of box.

Processor
Processor Model: Intel E8400
Speed: 4.3Ghz Overclocked. 3Ghz Default.
Recognized as what in System Profiler: Unknown CPU.

Video Card
What type of card (PCI Express/AGP/Integrated): PCI-E
NVIDIA/ATI/Intel? Nvidia
Model: 7800GS
Memory: 256MB
Board Manufacturer: Generic
Patches used: none
QE/CI: None


Sound Card Built-in.

[SuskindC]

Desktop/Laptop? Laptop

Prebuilt?
Manufacturer: Toshiba
Model: Satellite U300

Install Methods summary: iATKOS_v1.0ir2 10.5.1 (bootloader: x86)

Does EFI and/or the Vanilla kernel work?

(in following sections, if you don't know or not sure, write "unknown")
Motherboard
Manufacturer:
Motherboard Model: Toshiba Satellite U300
Chipset: Notrh( Intel Crestline-GM GM965 ), South (Intel 82801HBM ICH8-DO
BIOS Version: V3.60 (Phonex) , Revision: 01/22/08
BIOS setup options: (I Can't sat my Bios. Because my Laptop Bios......Lock~~~)
Audio: Realtek ALC268
LAN: Doesn't Work (BELKIN USB 2.0 F5D8053ak, Intel Wireless 4965AGN)
SATA & IDE: SATA2
RAM: DDR2 2037MB

Processor
Processor Model: Mobile DualCore Intel COre 2 Duo T5500, 1666MHZ(10x167)
Speed: 1666MHZ(10x167)
Recognized as what in System Profiler: 1.67GHZ

Video Card (if you have integrated and PCI/AGP, use this template twice)
What type of card (PCI Express/AGP/Integrated):
NVIDIA/ATI/Intel? Intel
Model: GMA X3100
Memory: 448MB
Board Manufacturer:
Patches used: I try to all of patches but...Doesn't work
QE/CI: Doesn't Work
All resolutions available?

Other Accessories (USB/FIREWIRE)
Type (Webcam, External Sound Card, USB bluetooth dongle, etc.): Webcam
Name: Chicony USB 2.0 Camera
Manufacturer:
Works? N
Patches/Work out of the box?

[kingknight]

Desktop/Laptop? Laptop

Prebuilt?
Manufacturer: HP
Model: Pavilion zd8000 CTO

Install Methods summary:
- kalyway v10.5.1 Intel SSE2&SSE3 + kalyway v10.5.2 Combo update
- Update Software (Except Timemachine and Airport Update)

Does EFI and/or the Vanilla kernel work? No

(in following sections, if you don't know or not sure, write "unknown")
Motherboard
Manufacturer: unknown
Motherboard Model: unknown
Chipset: Intel 915G chipset
BIOS Version: V3.40 (Phonex) , Revision: 01/22/08
BIOS setup options: After Load Default Settings in BIOS, Save and Restart.
Audio: Conexant AC97 Driver
LAN: Works All. (Realtek 8139 LAN, Broadcom 802.11b/g WLANF5D8053ak, IEEE1394 Firewire)
SATA & IDE: IDE 80GB
RAM: DDR2 1024MB

Processor
Processor Model: Intel Pentium4 640 Prescott
Speed: 3.2GHz
Recognized as what in System Profiler: 3.2GHz Unknown

Video Card (if you have integrated and PCI/AGP, use this template twice)
What type of card (PCI Express/AGP/Integrated): PCI Express x16
NVIDIA/ATI/Intel? ATI
Model: Mobility Radeon X600
Memory: 128MB
Board Manufacturer : Unknown
Patches used:
- Callisto b003 fixed : Supported Full Resolution (1680x1024)
- koverg patch9700 v0.2 : not supported QE/CI/GL (didn't support to QE/CI/GL any other ways)
QE/CI: Doesn't Work
All resolutions available? Yes

Other Accessories (USB/FIREWIRE)
Type (Webcam, External Sound Card, USB bluetooth dongle, etc.): USB HDD
Name: Bestech 3.5 Series
Manufacturer: Bestech
Works? Yes
Patches/Work out of the box? No

[kingofthesofas]

Ok so here's my hardware:
Processor Name: Intel® Core™2 Quad CPU Q6600 @
Processor speed: 2.45 GHz
ABIT IP35 Pro motherboard
500 gig Sata HD
Sata DVD-RW Drive
Geforce 8800 GT 512 mb
8 gigs ram

So here are the options I selected in the Iatkos r2 install
Bootloader
DarwinEFI
DarwinEFI Bootlaoder
StockACPIPlatform
Patches
SSE2-SSE3 Kernal
System
Sata Drivers
Apple SMBios.kext Netkas
Drivers
VGA
Geforce 8800
NVinject
512
Network
Realtek 8139


Make sure you do a fresh format before you install too, (just in case like me you've done several un-successful installs in the past lol)

Th install should go smoothly, getting it to boot was super easy, I'm running Vista on my other hard drive so I used EasyBCD 1.7.1 and used it to add an entry for mac-osx..... suprisingly it worked perfectly without me having to do anything else to edit the bootloader.
http://neosmart.net/dl.php?id=1 <---link for EasyBCD download
the first time it boots up it crashes at the configure keyboard prompt, I'm not sure why but if you try and boot it again it works fine from there on out.
The sound will not work at first and the video card will not be detected.

Use this to fix the sound:
Open Terminal and run these commands

cd /System/Library/Extensions
sudo pico AppleAzaliaAudio.kext/Contents/Info.plist

find <key>IOHDAudioCodecVendorID</key>
add: <string>0x10ec0888</string>
CTRL + O to save, then CTRL + X so exit.

Finally edit AppleAzaliaAudio.kext/Contents/PlugIns/AppleAzaliaController.kext/Contents/Info.plist

sudo pico AppleAzaliaAudio.kext/Contents/PlugIns/AppleAzaliaController.kext/Contents/Info.plist

Find: <key>IOPCIPrimaryMatch</key>
add: <string>0x293e8086</string>
press Ctrl + O to save and then Ctrl + X to exit

Clean up the system:

sudo diskutil repairpermissions /
sudo chown -R root:wheel AppleAzaliaAudio.kext
sudo chmod -R 755 AppleAzaliaAudio.kext
cd /System/Library
sudo rm -rf Extensions.mkext Extensions.kextcache

reboot and enjoy.

(Originally posted here http://forum.insanelymac.com/index.php?sho...ro+sound+brazil )

To get the video card working use the NVinstallerV.41.pkg
you can get it here http://scottdangel.com/blog/?p=23

Everything works great and with my quad core and 8 gigs of ram my computer runs pretty much at the speed of light, my build only costs about 1400 too which to get the same on a mac pro would cost well over 5k I'm using it now for video editing (final Pro installed)

The only problem is my firewire doesn't seem to want to work right but I'm working on a solution unless anybody has some input for it

[macoff]

Hi everyone...

Motherboard:

CODE

|Motherboard Model Asus P5B
|Chipset (P965-G965/828001HB-HR ICH8/R)
|
* Install Method: Kalyway 10.5.1 (update to 10.5.2)
* BIOS Version:; Revision: 0702
* Audio: ADI1988B, Azalia_out patch (only stereo out) (including ones from the install DVD)
* LAN: Realtek R8110, no needs patching (including ones from the install DVD)
* SATA & IDE: Yes SATA and IDE in AHCI mode. no patch needs
* Optical Drive: Asus DRW-1814BLT SATA. no patch needs
* Do shutdown, reboot and sleep work? Reboot and shutdown working, sleep not work
* Any other details
|Does PC-EFI and/or the Vanilla Kernel work on your system? Yes. GUID partition, PC-EFI v8 and Vanilla Kernel 9.2.2
|Does everything work without patching? no, needs patching audio.

Procesor:

CODE

|Your processor manufacturer, series, then model. Intel Core 2 Duo E6400
|Anything special selected at install? Does it work right? Fully Working
|What does system profiler see your processor as? Like Intel Core 2 Duo E6400
|Is it fully working without any patches? Yes (Vanilla Kernel 9.2.2)

Videocard:

CODE

|Your Board Model & Memory. Ati HD2600 XT 256Mb DDR3
|Board Manufacturer Gygabite
|Patches Used, if any. Netkas Natit
|Do QE and CI work? Yes, Hardware Accelerated
|Can you change resolutions? Yes
|Does it fully work without patches? No

Saludos MacOff

[maverickds]

Model - HP dv9572ea

Install Method - Kalyway 10.5.1 and Kalyway 10.5.2 upgrade (MBR) dualboot with Vista (easyBCD)
Chipsets - Intel
Processor - Intel Core 2 Duo T7300
Audio - ALC268(alc268 installer1)
LAN - Realtek 10/100 ethernet
Wifi - Not Working
Video - Geforce 8400M GS(NVinject 0.2.1 and geforce 1052kext and custom OpenGl framework)
Sata - works straight away

[SocratesT3HThird]

Current OS X Version: 10.5.2

Desktop/Laptop? Desktop

Prebuilt? (Y/N) N


Install Methods summary: Zephyroth 10.5.2 AMD EFI (Rev. 2)

Does EFI and/or the Vanilla kernel work? Partitioned as MBR, EFI


Motherboard
Manufacturer: GigaByte
Motherboard Model:GA-MA69VM-S2 (Rev 1)
Chipset: AMD 690V + AMD SB600
BIOS Version: Unknown , Revision: Unknown
BIOS setup options: SATA Active, S.M.A.R.T. Enabled
Audio: Realtek ALC888 Audio Codec(skippyretard's ALC888 Audio)
LAN: Realtek RTL8110 Gigabit Ethernet
SATA & IDE: Works out of the box

Processor
Processor Model: AMD Athlon X2 64 4600+
Speed: 2 x 2.4GHz
Recognized as what in System Profiler: About this mac = 2.6GHz Unknown, System Profiler = AMD Athlon™ 64 X2 Dual Core Processor 4600+

Video Card
What type of card: PCI Express
NVIDIA
Model: GeForce 8500GT
Memory: 512MB DDR2
Board Manufacturer: Gigabyte Technology
Patches used: NVInject 0.2.1
QE/CI: Supported/Hardware Accelerated
All resolutions available? Yes

Other PCI/PCI-e Components (USB are listed in Other Accessories below)
Wireless/Wired Card: Wireless PCI card
Interface: PCI
Standard (Wireless only): 801b/g
Manufacturer: Linksys
Model: WMP54G v. 4.1
Works? No
Patches: