Intel Wireless 2100, 2200bg, 2915bg, 3945abg, 4965agn, IWIDarwin drivers for mac os x 10.4 and 10.5 *under development* Options

[Roal2488]

logs from rev 664
will test 665 MAc

Attached File(s)

 ioreg.txt ( 55.85K ) Number of downloads: 4
 dmesg.txt ( 4K ) Number of downloads: 4
 system.txt ( 257.13K ) Number of downloads: 3

 

[Sousuke]

iwi3945, r665:
Loading the kext instantly crashes the OS.
I couldn't get any logs... one screenshot is attached!

Attached File(s)

 iwi3945_r665.zip ( 216.69K ) Number of downloads: 28
 screen_0.jpg ( 178.62K ) Number of downloads: 41

 

[Roal2488]

i get the same screen as sosuke and Im getting the KP at start too, couldtn get any logs either
i booted in safe boot and saved the system log, i dont know if it's of any use but here it is

PD: TNW Please help, i think u guys are so close to make this work

Attached File(s)

 system.txt ( 48.24K ) Number of downloads: 10

 

[TNW]

Hi ,
I'm so sorry but at this moment , I can't help you.
First because I'm in Hollyday and I haven't my computer , I've an other old computer.

And I'm working on an other driver for this old computer XD (SiS900 the driver is quite to be finished in only one day , ethernet driver I love you! :q)

I hope that Jalavoui finish it soon.

So Good luck all.

PS: I'am connected trough a crappy cable modem with usb Grrr

[zacwhite15]

ok well unlike everyone else here i have no problem with my system KP'ing on me. my issue is that the .kext doesnt load something about a mem error when executing it. and when i go into my sys preferances it still doesnt detect the card. so am i doing something wrong? oh and also this is the error i get when i run the network selector:


saac-whites-mac-pro:~ IsaacWhite$ /Applications/networkSelector ; exit;
Unhandled transform (1) for ioctl group = 78 (N), number = 3, length = 100
Illegal instruction
logout

[Process completed]

and this is the error i get during the boot up process:
kld_load_from_memory() failed for module /System/Library/Extensions/iwi3945.kext/Contents/MacOS/iwi3945

Apr 3 23:17:59 localhost kextd[41]: a link/load error occured for kernel extension /System/Library/Extensions/iwi3945.kext

i know that the kext is there because i double check it. if i knew how to do a sys log i would do that to help. but if anyone can help me get my setup to the point where it atleast recognizes and sees the card it would be greatly appreciated.

HackerZac
*hacking is the way to go*

HP Pavilion
DV9207us
Core Duo 1.73Ghz
3gb DDR2 533
WD1200BEVS-Running Vista Enterprise
WD1600BEVS-Running Kalyway OsX 10.5.2
Intel 3945abg
GeForce Go 7600 256mb

[dab77]

iwi3945-r665.

KP as I try to kextload that.

same as sousuke.

[jalavoui]

iwi3945 rel 666
need help to debug this
boot with -s to test

[Sousuke]

iwi3945, r666:
I'm still getting an kp...
No logs... one screenshot attached!

Attached File(s)

 screen_1.jpg ( 144.61K ) Number of downloads: 22
 iwi3945_r666.zip ( 217.16K ) Number of downloads: 20

 

[jalavoui]

iwi3945

new functions new panic...
anyone online to test new releases?

ok rel 667 is in the svn tree
i'll wait for logs

if you get a kp post the picture otherwise i can't fix it

[dab77]

iwi3945 rel 666
need help to debug this
boot with -s to test

one question:
I use to save the new driver dir into a usb-pendrive, to port them on Hackintosh.
if I boot as single user, how can I mount the pen? and in which dir should I find that?

thanks..

[Roal2488]

iwi3945

new functions new panic...
anyone online to test new releases?

ok rel 667 is in the svn tree
i'll wait for logs

Got KP while booting with -s
couldnt get logs

[y2kkirb]

rev 667 kp

[Sousuke]

iwi3945, r667

Attached File(s)

 screen_0.jpg ( 146.07K ) Number of downloads: 92
 iwi3945_r667.zip ( 217.22K ) Number of downloads: 69

 

[EgoDeath]

so, just for the record, this wont work for us 10.5.x'ers will it?

no biggie, just wandering if there is any point in me submitting logs

[lastsoft]

Same result here..
KP...

[dab77]

iwi3945_r667

single mode boot
kp as kextloading.

Attached File(s)

 screen_KP.png ( 925.98K ) Number of downloads: 54

 

[jalavoui]

iwi3945 rel 669

add station code to allow driver start scanning, associating to networks
don't know when this is work...

well at least the logs are right

since you have xcode and the card maybe you can check where the driver panics
check ieeee80211_open() and add some debug msgs to cache the kp
if you can do this i can make the driver work much faster

you can capture the panic by adding IOLog("x\n"); messages to code
here's an example:

static int ieee80211_open(struct net_device *dev)
{
IM_HERE_NOW();

struct ieee80211_sub_if_data *sdata, *nsdata;
struct ieee80211_local *local = (ieee80211_local*)wdev_priv(dev->ieee80211_ptr);
struct ieee80211_if_init_conf conf;
int res;

sdata = (struct ieee80211_sub_if_data*)IEEE80211_DEV_TO_SUB_IF(dev);
IOLog("1\n");
//read_lock(&local->sub_if_lock);
list_for_each_entry(nsdata, &local->sub_if_list, list) {
struct net_device *ndev = nsdata->dev;

if (ndev != dev && ndev != local->mdev /*&& netif_running(ndev)*/ &&
compare_ether_addr(dev->dev_addr, ndev->dev_addr) == 0 &&
!identical_mac_addr_allowed(sdata->type, nsdata->type)) {
//read_unlock(&local->sub_if_lock);
return -1;//-ENOTUNIQ;
}
}
//read_unlock(&local->sub_if_lock);
IOLog("2\n");
if (sdata->type == IEEE80211_IF_TYPE_WDS &&
is_zero_ether_addr(sdata->u.wds.remote_addr))
return -ENOLINK;
IOLog("3\n");
if (sdata->type == IEEE80211_IF_TYPE_MNTR && local->open_count &&
!(local->hw.flags & IEEE80211_HW_MONITOR_DURING_OPER)) {
/* run the interface in a "soft monitor" mode */
local->monitors++;
local->open_count++;
//local->hw.conf.flags |= IEEE80211_CONF_RADIOTAP;
return 0;
}
//ieee80211_start_soft_monitor(local);
IOLog("4\n");
conf.if_id = dev->ifindex;
conf.type = sdata->type;
conf.mac_addr = dev->dev_addr;
res = local->ops->add_interface(local_to_hw(local), &conf);
IOLog("4\n");
if (res) {
if (sdata->type == IEEE80211_IF_TYPE_MNTR)
ieee80211_start_hard_monitor(local);
return res;
}
IOLog("5\n");
if (local->open_count == 0) {
res = 0;
IOLog("6\n");
tasklet_enable(&local->tx_pending_tasklet);
tasklet_enable(&local->tasklet);
IOLog("7\n");
if (local->ops->open)
res = local->ops->open(local_to_hw(local));
IOLog("8\n");
if (res == 0) {
res = 0;//dev_open(local->mdev);
if (res) {
if (local->ops->stop)
local->ops->stop(local_to_hw(local));
} else {
res = ieee80211_hw_config(local);
IOLog("9\n");
if (res && local->ops->stop)
local->ops->stop(local_to_hw(local));
//else if (!res && local->apdev)
// dev_open(local->apdev);
}
}
IOLog("10\n");
if (res) {
if (local->ops->remove_interface)
local->ops->remove_interface(local_to_hw(local),
&conf);
return res;
}
}
local->open_count++;
IOLog("11\n");
if (sdata->type == IEEE80211_IF_TYPE_MNTR) {
local->monitors++;
//local->hw.conf.flags |= IEEE80211_CONF_RADIOTAP;
} else
ieee80211_if_config(dev);

/*if (sdata->type == IEEE80211_IF_TYPE_STA &&
!local->user_space_mlme)
netif_carrier_off(dev);
else
netif_carrier_on(dev);*/
IOLog("12\n");
netif_start_queue(dev);
IOLog("13\n");
return 0;
}

if you do this when you get a kernel panic i can finish the driver much faster

[Roal2488]

i dont know if this is a KP but i got stucked in this screen
sorry for screenshot on the zip file...

Attached File(s)

 06042008374.zip ( 619.02K ) Number of downloads: 82

 

[zacwhite15]

oh my god thats like the closest i have seen it get. looks to me like it is also detecting the network channels as it loads. sweet were getting closer!!.
now i do have a question for you... how the hell did you get it to do that cause i have followed the instructions to the Tee and i still cant get it to even load the kext. so can someone help me??

[y2kkirb]

i dont know if this is a KP but i got stucked in this screen
sorry for screenshot on the zip file...

yeah, i got the exact same thing...