Intel Wireless 2100, 2200bg, 2915bg, 3945abg, 4965agn, IWIDarwin drivers for mac os x 10.4 and 10.5 *under development* Options

[TNW]

I only work on the 3945.Sorry.

[jalavoui]

a simple way to make logs:
download from iwidarwin
http://iwidarwin.googlecode.com/files/getlogs4.command.zip
unzip and double click the getlogs4.command file.
log files are in folder /
zip ip (if they're too large) and upload it here

i hope you're all here to post logs

i think iwi2200 as some bugs in 2915 card - test it and post results
if someone with the 4965 card likes to start developing - check source code with TNW, Symuc

[abidin]

there you go TNW, my three log:

1

CODE

error iwl3945: U iwl3945_power_init_handle Initialize power

error iwl3945: U iwl3945_power_init_handle adjust power command flags

Finished nic_set_pwr_src

error iwl3945: U iwl3945_load_bsm Begin load bsm

error iwl3945: U iwl3945_verify_bsm Begin verify bsm

error iwl3945: U iwl3945_verify_bsm BSM bootstrap uCode image OK

error iwl3945: U iwl3945_load_bsm BSM write complete, poll 1 iterations

error iwl3945: U __iwl3945_up iwl3945 is coming up

error iwl3945: U iwl3945_mac_open Start UP work.

error iwl3945: U iwl3945_isr ISR inta 0x80000009, enabled 0xaa00008b, fh 0x00010000

error iwl3945: U iwl3945_irq_tasklet TASKLET : inta 0x80000009, enabled 0x00000000, fh 0x00010000

error iwl3945: U iwl3945_rx_handle r = 1, i = 0, REPLY_ALIVE, 0x01

error iwl3945: U iwl3945_rx_reply_alive Alive ucode status 0x00000001 revision 0x1 0x9

error iwl3945: U iwl3945_rx_reply_alive Initialization Alive received.

__ IN iwl3945_init_alive_start __

error iwl3945: U iwl3945_verify_inst_sparse ucode inst image size is 900

error iwl3945: U iwl3945_verify_inst_sparse ucode inst image size is 2668

error iwl3945: U iwl3945_verify_ucode Initialize uCode is good in inst SRAM

error iwl3945: U iwl3945_init_alive_start Initialization Alive received.

error iwl3945: U iwl3945_set_ucode_ptrs Runtime uCode pointers are set.

__ OUT iwl3945_init_alive_start __

error iwl3945: U iwl3945_isr ISR inta 0x80000009, enabled 0xaa00008b, fh 0x00010000

error iwl3945: U iwl3945_irq_tasklet TASKLET : inta 0x80000009, enabled 0x00000000, fh 0x00010000

error iwl3945: U iwl3945_rx_handle r = 2, i = 1, REPLY_ALIVE, 0x01

error iwl3945: U iwl3945_rx_reply_alive Alive ucode status 0x00000001 revision 0x1 0x0

error iwl3945: U iwl3945_rx_reply_alive Runtime Alive received.GFX0: match category IOFramebuffer exists

GFX0: family specific matching fails


__ IN iwl3945_alive_start __

error iwl3945: U iwl3945_alive_start Runtime Alive received.

error iwl3945: U iwl3945_verify_inst_sparse ucode inst image size is 900

error iwl3945: U iwl3945_verify_inst_sparse ucode inst image size is 2668

error iwl3945: U iwl3945_verify_inst_sparse ucode inst image size is 80524

error iwl3945: U iwl3945_verify_ucode Runtime uCode is good in inst SRAM

error iwl3945: U iwl3945_alive_start RFKILL status: 0x1

error iwl3945: U iwl3945_init_channel_map Initializing regulatory info from EEPROM

error iwl3945: U iwl3945_init_channel_map Parsing data for 56 channels.

IOPCCard info: iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels

error iwl3945: U iwl3945_update_power_cmd Flags value = 0x00000008

error iwl3945: U iwl3945_update_power_cmd Tx timeout = 0

error iwl3945: U iwl3945_update_power_cmd Rx timeout = 0

error iwl3945: U iwl3945_update_power_cmd Sleep interval vector = { 0 , 0 , 0 , 0 , 0 }

error iwl3945: U iwl3945_enqueue_hcmd Sending command POWER_TABLE_CMD (#77), seq: 0x0400, 36 bytes at 0[0]:4

Wait POWER_TABLE_CMD Condition: 0ms left

error iwl3945: Error sending POWER_TABLE_CMD: time out after 50ms.

error iwl3945: U iwl3945_enqueue_hcmd Sending command REPLY_BT_CONFIG (#9b), seq: 0x0401, 16 bytes at 1[1]:4

Wait REPLY_BT_CONFIG Condition: 0ms left

error iwl3945: Error sending REPLY_BT_CONFIG: time out after 50ms.

error iwl3945: U iwl3945_commit_rxon Sending RXON

* without RXON_FILTER_ASSOC_MSK

* channel = 1

* bssid = 00:00:00:00:00:00Wait START_ALIVE Condition: 0ms left

Wait for START_ALIVE timeout after 200ms.

error iwl3945: U iwl3945_mac_open leave - failed

PXSX: family specific matching fails

dsmos: Initializing...

dsmos: Hook and decryption contexts set!

dsmos: Starting...


error iwl3945: U iwl3945_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x0402, 48 bytes at 2[2]:4

LPCB: family specific matching fails

Wait REPLY_RXON Condition: 0ms left

error iwl3945: Error sending REPLY_RXON: time out after 50ms.

error iwl3945: Error setting new configuration (-60).

error iwl3945: U iwl3945_alive_start ALIVE processing complete.

__ OUT iwl3945_alive_start __

NTFS driver 2.1 [Flags: R/O].

NTFS volume name Vista, version 3.1.

display: Not usable

NTFS volume name Datos, version 3.1.

gios-vgn-nr150fe:~ gio$

2

CODE

error iwl3945: U iwl3945_verify_ucode Initialize uCode is good in inst SRAM

error iwl3945: U iwl3945_init_alive_start Initialization Alive received.

error iwl3945: U iwl3945_set_ucode_ptrs Runtime uCode pointers are set.

__ OUT iwl3945_init_alive_start __

error iwl3945: U iwl3945_isr ISR inta 0x80000009, enabled 0xaa00008b, fh 0x00010000

error iwl3945: U iwl3945_irq_tasklet TASKLET : inta 0x80000009, enabled 0x00000000, fh 0x00010000

error iwl3945: U iwl3945_rx_handle r = 2, i = 1, REPLY_ALIVE, 0x01

error iwl3945: U iwl3945_rx_reply_alive Alive ucode status 0x00000001 revision 0x1 0x0

error iwl3945: U iwl3945_rx_reply_alive Runtime Alive received.

__ IN iwl3945_alive_start __

error iwl3945: U iwl3945_alive_start Runtime Alive received.

error iwl3945: U iwl3945_verify_inst_sparse ucode inst image size is 900

error iwl3945: U iwl3945_verify_inst_sparse ucode inst image size is 2668

error iwl3945: U iwl3945_verify_inst_sparse ucode inst image size is 80524

error iwl3945: U iwl3945_verify_ucode Runtime uCode is good in inst SRAM

error iwl3945: U iwl3945_alive_start RFKILL status: 0x1

error iwl3945: U iwl3945_init_channel_map Initializing regulatory info from EEPROM

error iwl3945: U iwl3945_init_channel_map Parsing data for 56 channels.

IOPCCard info: iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels

error iwl3945: U iwl3945_update_power_cmd Flags value = 0x00000008

error iwl3945: U iwl3945_update_power_cmd Tx timeout = 0

error iwl3945: U iwl3945_update_power_cmd Rx timeout = 0

error iwl3945: U iwl3945_update_power_cmd Sleep interval vector = { 0 , 0 , 0 , 0 , 0 }

error iwl3945: U iwl3945_enqueue_hcmd Sending command POWER_TABLE_CMD (#77), seq: 0x0400, 36 bytes at 0[0]:4

GFX0: family specific matching fails

display: family specific matching fails

Wait POWER_TABLE_CMD Condition: 0ms left

error iwl3945: Error sending POWER_TABLE_CMD: time out after 50ms.

error iwl3945: U iwl3945_enqueue_hcmd Sending command REPLY_BT_CONFIG (#9b), seq: 0x0401, 16 bytes at 1[1]:4

Wait REPLY_BT_CONFIG Condition: 0ms left

error iwl3945: Error sending REPLY_BT_CONFIG: time out after 50ms.

error iwl3945: U iwl3945_commit_rxon Sending RXON

* without RXON_FILTER_ASSOC_MSK

* channel = 1

* bssid = 00:00:00:00:00:00

error iwl3945: U iwl3945_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x0402, 48 bytes at 2[2]:4

Wait REPLY_RXON Condition: 0ms left

error iwl3945: Error sending REPLY_RXON: time out after 50ms.

error iwl3945: Error setting new configuration (-60).

error iwl3945: U iwl3945_alive_start ALIVE processing complete.

__ OUT iwl3945_alive_start __

Wait START_ALIVE Condition: 46ms left

3

CODE

iwl3945_rx_reply_alive Initialization Alive received.
__ IN iwl3945_init_alive_start __
error iwl3945: U iwl3945_verify_inst_sparse ucode inst image size is 900
error iwl3945: U iwl3945_verify_inst_sparse ucode inst image size is 2668
error iwl3945: U iwl3945_verify_ucode Initialize uCode is good in inst SRAM
error iwl3945: U iwl3945_init_alive_start Initialization Alive received.
error iwl3945: U iwl3945_set_ucode_ptrs Runtime uCode pointers are set.
__ OUT iwl3945_init_alive_start __error iwl3945: U iwl3945_isr ISR inta 0x80000008, enabled 0xaa00008b, fh 0x00010000
GFX0: family specific matching fails
GFX0: family specific matching fails
Alkor: Starting.
Chosen model GMA X3100
Alkor: Setting built-in=<data not shown>
Alkor: Setting AAPL,HasPanel=<data not shown>
Alkor: Setting AAPL,SelfRefreshSupported=<data not shown>
Alkor: Setting AAPL,NumFramebuffers=<data not shown>
Alkor: Setting AAPL,NumDisplays=<data not shown>
Alkor: Setting AAPL01,Depth=<data not shown>
Alkor: Setting AAPL01,Pipe=<data not shown>
Alkor: Setting AAPL01,DataJustify=<data not shown>
fRegisters at 0x3d9b8000

error iwl3945: U iwl3945_irq_tasklet TASKLET : inta 0x80000009, enabled 0x00000000, fh 0x00010000
error iwl3945: U iwl3945_rx_handle r = 2, i = 1, REPLY_ALIVE, 0x01
error iwl3945: U iwl3945_rx_reply_alive Alive ucode status 0x00000001 revision 0x1 0x0
error iwl3945: U iwl3945_rx_reply_alive Runtime Alive received.
display: family specific matching fails__ IN iwl3945_alive_start __
error iwl3945: U iwl3945_alive_start Runtime Alive received.
error iwl3945: U iwl3945_verify_inst_sparse ucode inst image size is 900
error iwl3945: U iwl3945_verify_inst_sparse ucode inst image size is 2668
error iwl3945: U iwl3945_verify_inst_sparse ucode inst image size is 80524
error iwl3945: U iwl3945_verify_ucode Runtime uCode is good in inst SRAM
error iwl3945: U iwl3945_alive_start RFKILL status: 0x1
error iwl3945: U iwl3945_init_channel_map Initializing regulatory info from EEPROM
error iwl3945: U iwl3945_init_channel_map Parsing data for 56 channels.
IOPCCard info: iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels
error iwl3945: U iwl3945_update_power_cmd Flags value = 0x00000008
error iwl3945: U iwl3945_update_power_cmd Tx timeout = 0
error iwl3945: U iwl3945_update_power_cmd Rx timeout = 0
error iwl3945: U iwl3945_update_power_cmd Sleep interval vector = { 0 , 0 , 0 , 0 , 0 }
error iwl3945: U iwl3945_enqueue_hcmd Sending command POWER_TABLE_CMD (#77), seq: 0x0400, 36 bytes at 0[0]:4

display: family specific matching fails
Alkor: Starting.
Chosen model GMA X3100
Alkor: Setting built-in=<data not shown>
Alkor: Setting AAPL,HasPanel=<data not shown>
Alkor: Setting AAPL,SelfRefreshSupported=<data not shown>
Alkor: Setting AAPL,NumFramebuffers=<data not shown>
Alkor: Setting AAPL,NumDisplays=<data not shown>
Alkor: Setting AAPL01,Depth=<data not shown>
Alkor: Setting AAPL01,Pipe=<data not shown>
Alkor: Setting AAPL01,DataJustify=<data not shown>
Wait POWER_TABLE_CMD Condition: 0ms left
error iwl3945: Error sending POWER_TABLE_CMD: time out after 50ms.
error iwl3945: U iwl3945_enqueue_hcmd Sending command REPLY_BT_CONFIG (#9b), seq: 0x0401, 16 bytes at 1[1]:4
Wait REPLY_BT_CONFIG Condition: 0ms left
error iwl3945: Error sending REPLY_BT_CONFIG: time out after 50ms.
error iwl3945: U iwl3945_commit_rxon Sending RXON
* without RXON_FILTER_ASSOC_MSK
* channel = 1
* bssid = 00:00:00:00:00:00
error iwl3945: U iwl3945_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x0402, 48 bytes at 2[2]:4
Wait REPLY_RXON Condition: 0ms left
error iwl3945: Error sending REPLY_RXON: time out after 50ms.
error iwl3945: Error setting new configuration (-60).
error iwl3945: U iwl3945_alive_start ALIVE processing complete.Wait START_ALIVE Condition: 69ms left
error iwl3945: U iwl3945_mac_open leave
PXSX: family specific matching fails

__ OUT iwl3945_alive_start __
dsmos: Initializing...
dsmos: Hook and decryption contexts set!
dsmos: Starting...
NTFS driver 2.1 [Flags: R/O].
NTFS volume name Vista, version 3.1.
display: Not usable
NTFS volume name Datos, version 3.1.

without problem to load the driver

[TNW]

Many thank's ( the driver doesn't load on your hardware)
Can someone post other logs please ?

[parasito]

My logs.

 logs.zip ( 19.08K ) Number of downloads: 44



Hope it helps.

[TNW]

My logs.

 logs.zip ( 19.08K ) Number of downloads: 44

Hope it helps.

Yes it helps , the driver works on your hardware ESSID:WLAN_A1

thank you!

[parasito]

Yes it helps , the driver works on your hardware ESSID:WLAN_A1

thank you!

Yes, thats my AP!!!

If you need more test just tell me.

Thanks

[abidin]

what is the problem con my hardware TNW?

[TNW]

Maybe you are unlucky and the driver failed to start properly when you tested it .

[jalavoui]

TNW, Symuc
i think the driver will be more stable if it waits for the interface to be attached before calling iwl3945_bg_up().
to do this you'll have to try to use a similiar function of check_firstup() from iwi2200.
mac os always tries to bring the interface up - it calls the enable(),outputpacket() - after this call it is ok to call iwl3945_bg_up().
note that this works for IOEthernetController. maybe it's the same for IO80211Controller.
you can also try to use the p_disable=1 in the info.plist (need to write new code for this)
check if iwl3945_bg_rf_kill() status on/off can make the driver work wrong. if it is off you can't call iwl3945_bg_up()

just notice that skb_len() might fail - try to use
return mbuf_pkthdr_len(skb->mac_data); //not shure about this.need to test
take care with mbuf_len()/mbuf_pkthdr_len() declarations - they can give lots of bugs

check skb_clone() to see if it works for mbufs with chains!
if the driver receives/transfer packets with chains try to use iwi2200 mergePacket()
the iwi2200 driver never receives mbufs with chains but when it sends packets from outputpacket() you get mbuf with chains and need to use mergePacket().
if iwi3945 as the same behaviour the rx/tx packet code will be easy to write

[TheMarine]

Yes, thats my AP!!!

If you need more test just tell me.

Thanks

your ap? what type of security do you use?

[y2kkirb]

Here are my logs. The driver loaded up fine every time.
 Logs.zip ( 3.67K ) Number of downloads: 19

[abidin]

i re-install the driver, using myload.command and get this:

CODE

gios-vgn-nr150fe:~ gio$ sudo dmesg

45_rx_reply_rx

todo ieee80211_rx_irqsafe

80000000FFFFFFFFFFFF001B1188AE72001B1188AE72B0C295E67E2B9901000008003104000A6368
F636F6C61746573010482848B960301010504000100002A010032088C129824B048606CTODO ieee80211_tasklet_handler

error iwl3945: U iwl3945_isr ISR inta 0x80000008, enabled 0xaa00008b, fh 0x00010000

error iwl3945: U iwl3945_irq_tasklet TASKLET : inta 0x80000008, enabled 0x00000000, fh 0x00010000

error iwl3945: U iwl3945_rx_handle r = 231, i = 230, REPLY_3945_RX, 0x1b

iwl3945_rx_reply_rx

todo ieee80211_rx_irqsafe

80000000FFFFFFFFFFFF001B1188AE72001B1188AE72C0C2FE027F2B9901000008003104000A6368
F636F6C61746573010482848B960301010504000100002A010032088C129824B048606CTODO ieee80211_tasklet_handler

error iwl3945: U iwl3945_isr ISR inta 0x80000008, enabled 0xaa00008b, fh 0x00010000

error iwl3945: U iwl3945_irq_tasklet TASKLET : inta 0x80000008, enabled 0x00000000, fh 0x00010000

error iwl3945: U iwl3945_rx_handle r = 232, i = 231, REPLY_3945_RX, 0x1b

iwl3945_rx_reply_rx

todo ieee80211_rx_irqsafe

80000000FFFFFFFFFFFF001B1188AE72001B1188AE72D0C289247F2B9901000008003104000A6368
F636F6C61746573010482848B960301010504000100002A010032088C129824B048606CTODO ieee80211_tasklet_handler

error iwl3945: U iwl3945_isr ISR inta 0x80000008, enabled 0xaa00008b, fh 0x00010000

error iwl3945: U iwl3945_irq_tasklet TASKLET : inta 0x80000008, enabled 0x00000000, fh 0x00010000

error iwl3945: U iwl3945_rx_handle r = 233, i = 232, REPLY_3945_RX, 0x1b

iwl3945_rx_reply_rx

todo ieee80211_rx_irqsafe

80000000FFFFFFFFFFFF001B1188AE72001B1188AE72E0C2EF457F2B9901000008003104000A6368
F636F6C61746573010482848B960301010504000100002A010032088C129824B048606CTODO ieee80211_tasklet_handler

error iwl3945: U iwl3945_isr ISR inta 0x80000008, enabled 0xaa00008b, fh 0x00010000

error iwl3945: U iwl3945_irq_tasklet TASKLET : inta 0x80000008, enabled 0x00000000, fh 0x00010000

error iwl3945: U iwl3945_rx_handle r = 234, i = 233, REPLY_3945_RX, 0x1b

iwl3945_rx_reply_rx

todo ieee80211_rx_irqsafe

80000000FFFFFFFFFFFF001B1188AE72001B1188AE72F0C23D637F2B9901000008003104000A6368
F636F6C61746573010482848B960301010504000100002A010032088C129824B048606CTODO ieee80211_tasklet_handler

error iwl3945: U iwl3945_isr ISR inta 0x80000008, enabled 0xaa00008b, fh 0x00010000

error iwl3945: U iwl3945_irq_tasklet TASKLET : inta 0x80000008, enabled 0x00000000, fh 0x00010000

error iwl3945: U iwl3945_rx_handle r = 235, i = 234, REPLY_3945_RX, 0x1b

iwl3945_rx_reply_rx

todo ieee80211_rx_irqsafe

80000000FFFFFFFFFFFF001B1188AE72001B1188AE7200C317867F2B9901000008003104000A6368
F636F6C61746573010482848B960301010504000100002A010032088C129824B048606CTODO ieee80211_tasklet_handler

error iwl3945: U iwl3945_isr ISR inta 0x80000008, enabled 0xaa00008b, fh 0x00010000

error iwl3945: U iwl3945_irq_tasklet TASKLET : inta 0x80000008, enabled 0x00000000, fh 0x00010000

error iwl3945: U iwl3945_rx_handle r = 236, i = 235, REPLY_3945_RX, 0x1b

iwl3945_rx_reply_rx

todo ieee80211_rx_irqsafe

80000000FFFFFFFFFFFF001B1188AE72001B1188AE7210C31FA37F2B9901000008003104000A6368
F636F6C61746573010482848B960301010504000100002A010032088C129824B048606CTODO ieee80211_tasklet_handler

error iwl3945: U iwl3945_isr ISR inta 0x80000008, enabled 0xaa00008b, fh 0x00010000

error iwl3945: U iwl3945_irq_tasklet TASKLET : inta 0x80000008, enabled 0x00000000, fh 0x00010000

error iwl3945: U iwl3945_rx_handle r = 237, i = 236, REPLY_3945_RX, 0x1b

iwl3945_rx_reply_rx

todo ieee80211_rx_irqsafe

80000000FFFFFFFFFFFF001B1188AE72001B1188AE7220C30DC67F2B9901000008003104000A6368
F636F6C61746573010482848B960301010504000100002A010032088C129824B048606CTODO ieee80211_tasklet_handler

error iwl3945: U iwl3945_isr ISR inta 0x80000008, enabled 0xaa00008b, fh 0x00010000

error iwl3945: U iwl3945_irq_tasklet TASKLET : inta 0x80000008, enabled 0x00000000, fh 0x00010000

error iwl3945: U iwl3945_rx_handle r = 238, i = 237, REPLY_3945_RX, 0x1b

iwl3945_rx_reply_rx

todo ieee80211_rx_irqsafe

80000000FFFFFFFFFFFF001B1188AE72001B1188AE7230C32DE47F2B9901000008003104000A6368
F636F6C61746573010482848B960301010504000100002A010032088C129824B048606CTODO ieee80211_tasklet_handler

gios-vgn-nr150fe:~ gio$

[TNW]

Oh, I forgotten to say that you have to reboot after each test , it's an other problem of driver.

@Jalavoui : I tested the p_enable and skip the rf_kill but nothing changed , I think it's a problem of DMA , but I don't know what :/

Ok now I think it's working on all hardware , but not all the time :/ ( chcolates XD funny AP)

Thank's all of you!

[y2kkirb]

ok, here are 2 more logs after i rebooted.

Attached File(s)

 test2.txt ( 4K ) Number of downloads: 15
 test3.txt ( 4K ) Number of downloads: 13

 

[ulyanov77]

Not sure if I was testing correctly for the latest driver post by tnw, but here's what I got.

EDIT

after a reboot and another test, I think this test is good (just comparing with other successful tests)

Attached File(s)

 Archive.zip ( 45.21K ) Number of downloads: 11
 winner.zip ( 47.73K ) Number of downloads: 17

 

[vietboi821]

Hello all,

I tired making logs as per: http://forum.insanelymac.com/index.php?showtopic=71779

But when I did -s at bootloader and got to the screen, I was unable to do the next command "sh /etc/rc"

And when I decided to try the command printer for kicks, it said I didnt have permission to write.

I checked my os x partition and I couldn't find folders /etc/ in the root either...

Am i missing something?

Thanks!

[parasito]

your ap? what type of security do you use?

I mean that is my ESSID. I use WPA2.

[azuwis]

my 1st log, load the kext in the running system, not reboot using single mode.

I will post the 2nd and 3rd log after reboot.

Attached File(s)

 log1.zip ( 11.68K ) Number of downloads: 6

 

[EgoDeath]

Thank you thank you thank you thank you thank you thank youuuuuu sooo much!!!

Seriously though. i have the 3945 and by god i am so happy that you guys are putting your time and effort into this.

I will test and submit my logs as soon as i can (iv been up all night, need sleep first)
i have an acer 4202, and it will be so friggin happy with you guys..

eeeeeeeee i cant wait, but will happily

look forward to testing.