Analog Devices HD Audio (AD, ADI), Place your dumps and trouble with devices |
![]() |
Analog Devices HD Audio (AD, ADI), Place your dumps and trouble with devices |
|
anti_user
InsanelyMac Protégé
|
![]() |
Jan 4 2008, 06:08 AM Post #1
|
![]() ![]()
|
Im think that Analog Devices is manufacture of chipsets, but im not shure in it. If this is not true, im please administrators/moderators or other priveleged people of this forum delete this topic.
So, start this thread! |
|
RIGALAIZ
InsanelyMac Protégé
|
![]() |
Jan 4 2008, 08:16 AM Post #2
|
|
anti_user, good idea, i have asus p5e with Analog_Devices_AD1988B
and nothing works QUOTE AppleHDA Patcher - 2006/2007 by Taruga v1.20 _______________________________________________________ Codec : Analog Devices AD1988B Vendor Id : 0x11d4198b Subsystem Id : 0x1043829c _______________________________________________________ This codec is not working at the moment, it needs more research and QUOTE AppleHDA Patcher - 2006/2007 by Taruga v1.18 Leopard Darwin Kernel Version 9.1.0 * Patching AppleHDA.kext to 0x11d4198b Done * Checking AppleHDA for patch Done 000172a0 cmpl $0x11d4198b,%edx 00018860 cmpl $0x11d4198b,%edx * Checking for SPDIF Out Detected * Checking for SPDIF In Not Detected * Using the following nodes in pathmap Speaker : 18 41 4 Headphone: 17 34 55 4 Spdif Out: 27 2 * Copying new config to destination Done * Repairing Permissions Done ** Done patching - You can reboot now ** p.s. dump included
Attached File(s)
|
|
peerless
InsanelyMac Protégé
|
![]() |
Jan 4 2008, 08:50 PM Post #3
|
|
P5K-E WiFi/AP (ADI1988B)
QUOTE AppleHDA Patcher - 2006/2007 by Taruga v1.20 _________________________________________________ Codec : Analog Devices AD1988B Vendor Id : 0x11d4198b Subsystem Id : 0x1043829b _______________________________________________________ This codec is not working at the moment, it needs more research P.S. @anti_user, just wondering is this topic title a little bit confusing, someone could translate "Analog Devices"... just like real word analog device.. hope u understand me..., I mean.. what if it's ADI Devices instead of Analog Devices.. ?
Attached File(s)
|
|
-=MaD DoC=-
InsanelyMac Protégé
|
![]() |
Jan 5 2008, 05:27 AM Post #4
|
|
Same problem here
asus p5n32-sli mb |
|
|
anti_user
InsanelyMac Protégé
|
![]() |
Jan 5 2008, 06:48 AM Post #5
|
![]() ![]()
|
P5K-E WiFi/AP (ADI1988B) P.S. @anti_user, just wondering is this topic title a little bit confusing, someone could translate "Analog Devices"... just like real word analog device.. hope u understand me..., I mean.. what if it's ADI Devices instead of Analog Devices.. ? thx Peerless for advice! thx for all users and developers for hard work on InsanelyMac |
|
peerless
InsanelyMac Protégé
|
![]() |
Jan 5 2008, 11:05 AM Post #6
|
|
Yeah, now I think its fine
|
|
_quark_
InsanelyMac Protégé
|
![]() |
Jan 6 2008, 04:53 AM Post #7
|
![]()
|
I have 1988b too... but let's wait for taruga's new patcher v2... I hope there will be some progress...
|
|
Gipo
InsanelyMac Sage
|
![]() |
Jan 7 2008, 10:43 PM Post #8
|
![]() ![]() ![]() ![]() ![]()
|
On m2n32 asus sound limited to stereo output too...
|
|
macmma
InsanelyMac Protégé
|
![]() |
Jan 8 2008, 12:48 AM Post #9
|
|
Analog Devices AD1988B : P5K-E Wifi AP
I added these dumps to the other thread earlier, thought I'd add to this one too: Linux codec dump: http://forum.insanelymac.com/index.php?act...ch&id=19986 HDAudio.kext (v5) load log: http://forum.insanelymac.com/index.php?act...ch&id=19987 Currently, I get no sound - HD or otherwise. /Mahesh. |
|
inc188
InsanelyMac Protégé
|
![]() |
Jan 8 2008, 06:25 PM Post #10
|
![]()
|
i got ADI1983 and no audio...
when can we expect the new patcher? |
|
towhite
InsanelyMac Protégé
|
![]() |
Jan 8 2008, 07:07 PM Post #11
|
|
Halow..I have Toshiba Portege M500 with soundcard SoundMAX Integrated Digital HD Audio AD1981
i have installed Leopard Kalyway 10.5.1 but its cannot detect my soundcard..and than i have tried using AppleHDAPatcher 1.20 but its stil not works too..the message is "This codec is not working at the moment, it needs more research" Any body know how to make its works ? plz help me...thanks this is my codec dump for my soundcard information, i got using knoppix live cd ---------------------------------------------------------------------------- Codec: Analog Devices AD1981 Address: 0 Vendor Id: 0x11d41981 Subsystem Id: 0x103c30a2 Revision Id: 0x100200 Default PCM: rates 0x07f, bits 0x0e, types 0x1 Default Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Default Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1 Node 0x02 [Audio Output] wcaps 0x30311: Stereo Digital PCM: rates 0x060, bits 0x02, types 0x5 Connection: 2 0x01* 0x04 Node 0x03 [Audio Output] wcaps 0x441: Stereo Power: 0x0 Node 0x04 [Audio Input] wcaps 0x100511: Stereo PCM: rates 0x07f, bits 0x06, types 0x1 Power: 0x0 Connection: 1 0x15 Node 0x05 [Pin Complex] wcaps 0x400187: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1 Amp-Out vals: [0x2f 0x2f] Pincap 0x081173f: IN OUT HP EAPD Detect Pin Default 0x92174110: [Fixed] Speaker at Int Front Conn = Analog, Color = Green Pin-ctls: 0x40: OUT Connection: 2 0x03 0x0e* Node 0x06 [Pin Complex] wcaps 0x400185: Stereo Amp-Out Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1 Amp-Out vals: [0x2f 0x2f] Pincap 0x081f: OUT HP Detect Pin Default 0x0421201f: [Jack] HP Out at Ext Right Conn = 1/8, Color = Grey Pin-ctls: 0xc0: OUT HP Connection: 2 0x03 0x0e* Node 0x07 [Pin Complex] wcaps 0x400104: Mono Amp-Out Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1 Amp-Out vals: [0x80] Pincap 0x0810: OUT Pin Default 0x410710f0: [N/A] Line Out at Ext Rear Conn = Analog, Color = Black Pin-ctls: 0x40: OUT Connection: 1 0x0f Node 0x08 [Pin Complex] wcaps 0x400083: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: Pincap 0x081727: IN Detect Pin Default 0x04a12020: [Jack] Mic at Ext Right Conn = 1/8, Color = Grey Pin-ctls: 0x24: IN Node 0x09 [Pin Complex] wcaps 0x400187: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1 Amp-Out vals: [0xbf 0xbf] Pincap 0x081737: IN OUT Detect Pin Default 0x0181302e: [Jack] Line In at Ext Rear Conn = 1/8, Color = Blue Pin-ctls: 0x20: IN Connection: 2 0x03* 0x0e Node 0x0a [Pin Complex] wcaps 0x400301: Stereo Digital Pincap 0x0810: OUT Pin Default 0x4145f0f0: [N/A] SPDIF Out at Ext Rear Conn = Optical, Color = Other Pin-ctls: 0x40: OUT Connection: 1 0x02 Node 0x0b [Audio Selector] wcaps 0x300101: Stereo Connection: 6 0x03 0x0c 0x09 0x0e* 0x05 0x18 Node 0x0c [Audio Mixer] wcaps 0x200101: Stereo Connection: 2 0x1e 0x1f Node 0x0d [Audio Selector] wcaps 0x30010c: Mono Amp-Out Amp-Out caps: ofs=0x0f, nsteps=0x0f, stepsize=0x0b, mute=1 Amp-Out vals: [0x80] Connection: 2 0x10* 0x16 Node 0x0e [Audio Mixer] wcaps 0x200101: Stereo Connection: 8 0x0d 0x11 0x12 0x13 0x1a 0x1b 0x1c 0x1d Node 0x0f [Audio Mixer] wcaps 0x200100: Mono Connection: 1 0x0b Node 0x10 [Beep Generator Widget] wcaps 0x700000: Mono Node 0x11 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x15 0x15] Connection: 1 0x03 Node 0x12 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Connection: 1 0x08 Node 0x13 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Connection: 1 0x09 Node 0x14 [Power Widget] wcaps 0x500500: Mono Power: 0x0 Connection: 13 0x0d* 0x0e 0x0f 0x10 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1a 0x1d Node 0x15 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Connection: 8 0x0c* 0x09 0x0e 0x0f 0x19 0x05 0x18 0x17 Node 0x16 [Pin Complex] wcaps 0x400000: Mono Pincap 0x0820: IN Pin Default 0x995711f0: [Fixed] Digital Out at Int ATAPI Conn = Analog, Color = Black Pin-ctls: 0x20: IN Node 0x17 [Pin Complex] wcaps 0x400081: Stereo Pincap 0x0827: IN Detect Pin Default 0x5993e0f0: [N/A] Aux at Int ATAPI Conn = ATAPI, Color = White Pin-ctls: 0x20: IN Node 0x18 [Pin Complex] wcaps 0x400187: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x081737: IN OUT Detect Pin Default 0x59a790f0: [N/A] Mic at Int ATAPI Conn = Analog, Color = Pink Pin-ctls: 0x24: IN Connection: 2 0x03* 0x0e Node 0x19 [Pin Complex] wcaps 0x400001: Stereo Pincap 0x0820: IN Pin Default 0x593310f0: [N/A] CD at Int ATAPI Conn = ATAPI, Color = Black Pin-ctls: 0x20: IN Node 0x1a [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Connection: 1 0x05 Node 0x1b [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Connection: 1 0x17 Node 0x1c [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Connection: 1 0x18 Node 0x1d [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Connection: 1 0x19 Node 0x1e [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Connection: 1 0x08 Node 0x1f [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Connection: 1 0x18 ----------------------------------------------------------------------------- |
|
towhite
InsanelyMac Protégé
|
![]() |
Jan 8 2008, 08:22 PM Post #12
|
|
Hello guys..do you already success install tiger/leopard and your AD1981 soundcard works ? please share here...thanks
|
|
mitro
InsanelyMac Protégé
|
![]() |
Jan 8 2008, 10:44 PM Post #13
|
|
I've a compaq 6710b with the infamous ADI 1981. works with azalia but have a Mute issue, always after 40" mute on.....
tried all taruga kext but no fortune... Please Taruga you are our last hope..!!!! |
|
peerless
InsanelyMac Protégé
|
![]() |
Jan 10 2008, 08:48 AM Post #14
|
|
Tortuga... this seems to be something different then Taruga
A tribe may be? |
|
_quark_
InsanelyMac Protégé
|
![]() |
Jan 10 2008, 10:27 AM Post #15
|
![]()
|
Tortuga... lol... Pirates of the Carribean?
|
|
macmma
InsanelyMac Protégé
|
![]() |
Jan 10 2008, 06:54 PM Post #16
|
|
Analog Devices AD1988B : P5K-E Wifi AP I added these dumps to the other thread earlier, thought I'd add to this one too: Linux codec dump: http://forum.insanelymac.com/index.php?act...ch&id=19986 HDAudio.kext (v5) load log: http://forum.insanelymac.com/index.php?act...ch&id=19987 Currently, I get no sound - HD or otherwise. I was using the audio output on the front of the case, which does not work. I used the one on the back (Lime - to be precise) and 2-channel audio does work. Pretty happy about that! |
|
peerless
InsanelyMac Protégé
|
![]() |
Jan 12 2008, 01:27 PM Post #17
|
|
Sure, on kaly 10.5.1 back panel stereo working fine w/o pathcing, i'm very impatient about the next taruga's release...
|
|
nextAaron
InsanelyMac Protégé
|
![]() |
Jan 13 2008, 06:18 AM Post #18
|
|
|
|
yheit
InsanelyMac Protégé
|
![]() |
Jan 13 2008, 02:37 PM Post #19
|
|
Asus P5B-VM
ADI® AD1988 8-channel High Definition Audio CODEC
Attached File(s)
|
|
omegax
InsanelyMac Protégé
|
![]() |
Jan 13 2008, 06:04 PM Post #20
|
|
Hi Mitro, same laptop model here with the same issue! Mute goes on every 40s or so. I think the platform (possibly the ACPIPlatform kext?)
sends some signal - (e..g, a status check) to the mute button (HPQ004 ?) which the system then interpretes wrongly as an activate command. Someone suggested in some other post that maybe if a driver is written for the HPQ004 (it is registered as an ACPI device - see output of ioreg) to trap the signal and respond appropriately, we may be able to use the standard Azalia kext. Any takers? I know nothing about programming on the Mac :-( |
![]() |
|
Lo-Fi Version | Time is now: 21st November 2009 - 01:15 PM |