Realtek HD Audio, Place your dumps and trouble with devices Options

[anti_user]

And now topic for Realtek audio chipsets
Hope, moderators and developers with users like this separated topics

Thx

[snoxu]

ALC660 on my Asus G1 lappy

Tried the dumps up on http://psykopat.free.fr/apple/AppleHDA/

After reboot I still don't have any audio devices. So none of them work with me at least...

[kaze]

ALC660 VD Packard Bell BU45 Laptop
Nothing work

Attached File(s)

 codec.txt ( 6.88K ) Number of downloads: 232

 

[Azurael]

Lenovo N200 ALC862 (aka ALC ALC861-VD/862-VD, but only according to ALSA!) working with MadTux's most recent modded kext. No volume control (although mute works), but Mic-In working, along with Int. Speakers and Headphone jack.

Attached File(s)

 codec.txt ( 6.88K ) Number of downloads: 428

 

[z0n3x]

Codec: ALC888
Motherboard: GA-P31-DS3L

Work only 2 outputs and 1 sipf 2 inputs and all 6 ports not work without 5.1 surround sound. All other work fine

Dump file:
 ALC888_GA_P31_DS3L_KENTEX.txt ( 8.43K ) Number of downloads: 738

[Wilson666]

can't get a single sound out of this.

Codec: Realtek ID 268
Address: 0
Vendor Id: 0x10ec0268
Subsystem Id: 0x1179ff0a
Revision Id: 0x100003

just got two output devices, no input.
one output able to mute
no volume control
no sound :(

 ALC268_toshiba_satego_x200.txt ( 5.71K ) Number of downloads: 138

[amx]

need some help getting other features of the ALC882M working
The output works fine, but input and digital, front and mic still doesnt work.

Leopard 10.5.1 EFI install.

Thanks

[LowTech]

Notebook: Acer Travelmate 5720G
Sound Card: Intel ICH8 HDAUDIO / Realtek HDAUDIO
Vendor Id: Intel VEN=8086, DEV=284B / Realtek VEN=10EC, DEV=0268

Working: nothing

System Version: Kaly Leo 10.5.1, Vanilla, EFI8

Detected by system profiler as Intel High Definition Audio with Device-Id=0x1025011F, Audio-Id=12. Ubuntu 7.10 64bit reports the audio device as codec#0, see attached dump.

Thanks
--LowTech

Attached File(s)

 codec0_TM5720G.txt ( 5.69K ) Number of downloads: 156

 

[drbee]

Motherboard ASrock Conroe 1333 d667

Chip : alc888

nothing works just azalia 2ch package but gives no input

Attached File(s)

 linuxdumpAlc888.txt ( 8.98K ) Number of downloads: 157

 

[Photoshop]

Leo 10.5.1 Efi8
MB Asus p5l 1394
ICH7 ALC883
All works, but 5.1 not work.
 ALC883_ASUS_P5L_1394_codec_dump.txt ( 8.52K ) Number of downloads: 388

[sdelano]

ALC880: from ECS 954P-A mobo....doesn't work when patched with this (working) dump from linux.

Codec: Realtek ALC880
Address: 0
Vendor Id: 0x10ec0880
Subsystem Id: 0x8800000
Revision Id: 0x100800

Any idea on how to get it to work?

Azalia 2ch doesn't even show up as working...the kext loads but no devices are present. I am getting fed up with this. Oh well...

Thanks,
sdelano

Attached File(s)

 880dump.txt ( 7.35K ) Number of downloads: 81

 

[Hando567]

Lenovo N200 ALC862 (aka ALC ALC861-VD/862-VD, but only according to ALSA!) working with MadTux's most recent modded kext. No volume control (although mute works), but Mic-In working, along with Int. Speakers and Headphone jack.

Lenovo N100. same boat as Azurael is in right now. i have sound and can mute it, but no volume control

[kadmiff]

Hi Peoples,
I have an alc260 codec in an NEC p7200 laptop

applehdapatcher 1.20

AppleHDA Patcher - 2006/2007 by Taruga v1.20


* Patching AppleHDA.kext to 0x10ec0260 Done
* Checking AppleHDA for patch Done
0001f4a0 cmpl $0x10ec0885,%eax
0001f4a7 cmpl $0x10ec0260,%eax
00020584 cmpl $0x10ec0885,%eax
0002058b cmpl $0x10ec0260,%eax
* Checking for SPDIF Out Detected
* Checking for SPDIF In Not Detected
* Using the following nodes in pathmap

Speaker : 15 8 2
Spdif Out: 24 3

* Copying new config to destination Done
* Repairing Permissions Done
* Deleting Extensions Cache Done

** Done patching - You can reboot now **

on reboot volume is there
line out
digital audio

there is a very very faint sound out of the headphone socket(which is also the SPDIF Out )
I would assume that the digital works as with azalia I get the same out of the headphones but the light isn't on, whereas the light is on with hda..
if i could only get the internal speakers to work , Wow...

Please find the attatched working codec dump from ubantu

cheers,
Paul (kadmiff)

Attached File(s)

 alc260.txt ( 5.79K ) Number of downloads: 253

 

[resetu]

not working, all is grey, I have tried 1.16 and 1.20 on both tiger and leopard.
ALC 883 on MCP 68.

Codec: Realtek ALC883
Address: 0
Vendor Id: 0x10ec0883
Subsystem Id: 0x0
Revision Id: 0x100002
Default PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
Node 0x02 [Audio Output] wcaps 0x11: Stereo
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x03 [Audio Output] wcaps 0x11: Stereo
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x04 [Audio Output] wcaps 0x11: Stereo
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x05 [Audio Output] wcaps 0x11: Stereo
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0x1e]: 16 20 24 32
formats [0x1]: PCM
Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x08 [Audio Input] wcaps 0x10011b: Stereo Amp-In
Amp-In caps: ofs=0x08, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x00 0x00]
PCM:
rates [0x160]: 44100 48000 96000
bits [0x6]: 16 20
formats [0x1]: PCM
Connection: 1
0x23
Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In
Amp-In caps: ofs=0x08, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x00 0x00]
PCM:
rates [0x160]: 44100 48000 96000
bits [0x6]: 16 20
formats [0x1]: PCM
Connection: 1
0x22
Node 0x0a [Audio Input] wcaps 0x100391: Stereo Digital
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0x1e]: 16 20 24 32
formats [0x1]: PCM
Connection: 1
0x1f
Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x80 0x80] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 10
0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17
Node 0x0c [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
Amp-Out vals: [0x19 0x19]
Connection: 2
0x02 0x0b
Node 0x0d [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 2
0x03 0x0b
Node 0x0e [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 2
0x04 0x0b
Node 0x0f [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 2
0x05 0x0b
Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x12 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x14 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x083e: IN OUT HP Detect
Pin Default 0x01014c10: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Green
Pin-ctls: 0x40: OUT
Connection: 5
0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x15 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x083e: IN OUT HP Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0x20: IN
Connection: 5
0x0c 0x0d* 0x0e 0x0f 0x26
Node 0x16 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x083e: IN OUT HP Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0x20: IN
Connection: 5
0x0c 0x0d 0x0e* 0x0f 0x26
Node 0x17 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x083e: IN OUT HP Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0x20: IN
Connection: 5
0x0c 0x0d 0x0e 0x0f* 0x26
Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x08173e: IN OUT HP Detect
Pin Default 0x01a19c40: [Jack] Mic at Ext Rear
Conn = 1/8, Color = Pink
Pin-ctls: 0x24: IN
Connection: 5
0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x19 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x08173e: IN OUT HP Detect
Pin Default 0x02a19c50: [Jack] Mic at Ext Front
Conn = 1/8, Color = Pink
Pin-ctls: 0x24: IN
Connection: 5
0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x1a [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x08173e: IN OUT HP Detect
Pin Default 0x01813c4f: [Jack] Line In at Ext Rear
Conn = 1/8, Color = Blue
Pin-ctls: 0x20: IN
Connection: 5
0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x08173e: IN OUT HP Detect
Pin Default 0x02014c20: [Jack] Line Out at Ext Front
Conn = 1/8, Color = Green
Pin-ctls: 0x20: IN
Connection: 5
0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x1c [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0820: IN
Pin Default 0x593301f0: [N/A] CD at Int ATAPI
Conn = ATAPI, Color = Unknown
Pin-ctls: 0x00:
Node 0x1d [Pin Complex] wcaps 0x400000: Mono
Pincap 0x0820: IN
Pin Default 0x4004c601: [N/A] Line Out at Ext N/A
Conn = RCA, Color = UNKNOWN
Pin-ctls: 0x00:
Node 0x1e [Pin Complex] wcaps 0x400300: Mono Digital
Pincap 0x0810: OUT
Pin Default 0x01441130: [Jack] SPDIF Out at Ext Rear
Conn = RCA, Color = Black
Pin-ctls: 0x00:
Connection: 1
0x06
Node 0x1f [Pin Complex] wcaps 0x400200: Mono Digital
Pincap 0x0820: IN
Pin Default 0x01c46160: [Jack] SPDIF In at Ext Rear
Conn = RCA, Color = Orange
Pin-ctls: 0x00:
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x22 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Amp-Out caps: N/A
Amp-Out vals: [0x00 0x00]
Connection: 11
0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b
Node 0x23 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x80 0x80] [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Amp-Out caps: N/A
Amp-Out vals: [0x00 0x00]
Connection: 11
0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b
Node 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x25 [Audio Output] wcaps 0x11: Stereo
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x26 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 2
0x25 0x0b

[shemozzle]

Hi Peoples,
I have an alc260 codec in an NEC p7200 laptop

applehdapatcher 1.20

AppleHDA Patcher - 2006/2007 by Taruga v1.20


* Patching AppleHDA.kext to 0x10ec0260 Done
* Checking AppleHDA for patch Done
0001f4a0 cmpl $0x10ec0885,%eax
0001f4a7 cmpl $0x10ec0260,%eax
00020584 cmpl $0x10ec0885,%eax
0002058b cmpl $0x10ec0260,%eax
* Checking for SPDIF Out Detected
* Checking for SPDIF In Not Detected
* Using the following nodes in pathmap

Speaker : 15 8 2
Spdif Out: 24 3

* Copying new config to destination Done
* Repairing Permissions Done
* Deleting Extensions Cache Done

** Done patching - You can reboot now **

on reboot volume is there
line out
digital audio

there is a very very faint sound out of the headphone socket(which is also the SPDIF Out )
I would assume that the digital works as with azalia I get the same out of the headphones but the light isn't on, whereas the light is on with hda..
if i could only get the internal speakers to work , Wow...

Please find the attatched working codec dump from ubantu

cheers,
Paul (kadmiff)

hi kadmiff

Many thanks for making this available - now have sound working on my Sony VGN-A417M Laptop

[IrAdO]

Notebook with ALC883
Using Taruga's patch:
Line out and speak out working :-)
line-in working :-) :-)
only internal mic not working

Attached File(s)

 iradoalc883.txt ( 8.53K ) Number of downloads: 241

 

[Castortroy2008]

No Sound workaround

I happen to have a plantronics usb headset- I plugged it in and instant audio!

I have a asrock alc660 realtek audio chipsett.

I also don't want to mess with kexts and dumps since there is not clear place to find info on EXACTLY how do do anything (because everyone has a slightly different config).

I will just get a Behringer FCA202 Firewire Audio Interface to solve my sound issues and start editing in FCP studio pro on my $210 anti-mac pro 3.1!!!!!!!

x-bench is 108 which is fine by me with a Celeron dual core 1.66

[00Diabolic ~~]

Lenovo N200 ALC862 (aka ALC ALC861-VD/862-VD, but only according to ALSA!) working with MadTux's most recent modded kext. No volume control (although mute works), but Mic-In working, along with Int. Speakers and Headphone jack.

Same as azurael. Same laptop n200. I use madtux driver also.
Would love to get volume control at some point.

codec dump:
http://forum.insanelymac.com/index.php?act...st&id=19841

Does anyone else with ALC862 notice it sounds tiney & skips out sometimes?

[Ray11208]

Hi Everyone !!!

I'm Just Trying To Get Output Audio , That Will Be Enough For Me ,,, But I Cant'
My MotherBoard Is A GiGaByte GA-G33M-S2L And Sound Chipset Is Realtek ALC662

Plz Any One Help ,,,, Everything Else Is Working Fine , Just Need To Hear Some Audio

Thanks So Much In Advance ,,, God Bless !!!

[shu8i]

Codec: ALC660

nothing working