Need testers for one of the components of next v2.00 Patcher Options

[ToTzliar]

Compaq v3148TU notebook:conexant hdaudio 14f1 5047

HDAudio[0x3ede00]::CodecDetection-started(0x2cec000) by Taruga
/HDAudio::D27:F0 Irq: 22 Vid: 8086 Pid: 27d8
:HDAudio::Cad Address: 0
HDAudio::Vid/Pid : 0x14f15047 0x00000000 0x00000000
HDAudio::Subsystem : 0x103c30b2
HDAudio::Revision : 0x00100000
HDAudio[0x30ede00]::CodecDetection-ended(0x1)

seems no problem exept 0x00000000 0x00000000, can i use yours HDAudio.kext to replace the one in /System/Library/Extensions now?

ATTENTION This kext is only for reporting info, it doesn´t do anything else. Don't put it in Extensions folder.

This post has been edited by Taruga: Dec 13 2007, 04:37 PM

[guilliamo]

HP DV9230US notebook:conexant hdaudio

kextload: /HDAudio.kext loaded successfully
HDAudio[0x3833800]::CodecDetection-started(0x3580700) by Taruga
/HDAudio::D27:F0 Irq: 22 Vid: 8086 Pid: 27d8
localhost:/ root# HDAudio::Cad Address: 0
HDAudio::Vid/Pid : 0x14f15045 0x00000000 0x00000000
HDAudio::Subsystem : 0x103c30bb
HDAudio::Revision : 0x00100100
HDAudio[0x3833800]::CodecDetection-ended(0x1)

Thanks Taruga !!

G

[lebidou]

Fujitsu-Siemens Amilo Pi 1556 / Realtek ALC 880

CODE

HDAudio[0x3C48400]::CodecDetection-started(0x397a080) by Taruga
HDAudio::D27:F0 Irq: 22 Vid: 8086 PiD: 27D8
HDAudio::Cad Adress: 0
HDAudio::Vid/Pid        : 0x10573055 0x10573055 0x10573055
HDAudio::Subsystem : 0x10573055
HDAudio::Revision     : 0x00100700
HDAudio::[0x3c48400]::CodecDetection-ended(0x1)

Linux Dump:

CODE

Codec: Realtek ALC880
Address: 1
Vendor Id: 0x10ec0880
Subsystem Id: 0x8800000
Revision Id: 0x100800

[aylamrin]

Hallo Taruga,
I'm using a Desktop and Intel DG33FB mobo. The output is:

CODE

kextload: can't contact kextd (continuing anyway)
kextload: extension /HDAudio.kext/ appears to be loadable
kextload: loading extension /HDAudio.kext/
kextload: /HDAudio.kext/ loaded successfully
kextload: sending personalities to kernel:
kextload: from extension /System/Library/Extensions/IOPCIFamily.kext:
kextload: IOPCI2PCIBridge-Name
kextload: IOPCI2PCIBridge-i386
kextload: IOPCI2PCIBridge-PCI
kextload: from extension //DAudio.kext:
kextload: HDAudio
kextload: sending 4 personalities to the kernel
kextload: matching started for /HDAudio.kext/

I'm also attaching the codec dump for ALC888... It is an address 2 codec.

Attached File(s)

 ALC888.txt ( 8.97K ) Number of downloads: 30

 

[lebidou]

Taruga: Well, the HD Audio Bus can support multiple devices, Audio, Modem, HDMI, etc
At the moment, it seems I can only communicate with the audio codec if it´s in address 0.
I have to get access to a pc with an audio codec in a different address to improve the code or else I´ll have to make a manual option for codecs at other addresses as I need to know where they are to program the codec right.

Why is this important ? For ex. for codecs that show input and output devices but don´t work at all, they need some code to modify codec parameters so they can work properly. And this is only one example.

What kind of info about the systems with different address do you need? Could it be grabbed with dumps from win or a linux distro ? Do you mean physical access or an access via ARD or so could be enough ?

[Max1980]

Hey Taruga
but why the v1 was working and the v3 is not in my case (ALC268)?

[Solique]

What kind of info about the systems with different address do you need? Could it be grabbed with dumps from win or a linux distro ? Do you mean physical access or an access via ARD or so could be enough ?

I've had the same result (no output) yet the Linux codec dump shows address 0.

[userx]

Compaq Presairo C17NR
Audio: Conexant CX20549-12 HDA

dumpz...

:/ root# kextload /hdaudio.kext
kextload: /hdaudio.kext loaded successfully
:/ root#_

linux dump attached...

Thanks Taruga!

Attached File(s)

 Conexant_CX20549_12_HDA_Dump.txt ( 2.6K ) Number of downloads: 55

 

[Sietepicos]

Hi,
No luck with ASUS p5K premiun Wifi with AD1988B.
Kext loaded sucessfully, but no more info.

Thanks Taruga for your great efforts and patience.
Sietepicos

[Jaco2k]

It seems we AD1988B users are screwed - Taruga, you are our last hope! Força, tuga!

[avk]

It seems we AD1988B users are screwed - Taruga, you are our last hope! Força, tuga!

hot only 88b, almost everyone, who uses HP Intel-based laptops, that comes with AD1981HD

[inferno0270]

For ALC268

CODE

HDAudio[0x28e7800]::CodecDetection-started(0x269cf80) by Taruga
HDAudio::D27:F0 Irq: 21 Vid: 8086 Pid: 27d8
HDAudio::Cad Address: 0
HDAudio::Vid/Pid : 0x10ec0268 0x00000000 0x00000000
HDAudio::Subsystem : 0x1025012b
HDAudio::Revision : 0x00100003
HDAudio[0x28e7800]::CodecDetection-ended(0x1)

[BugsB]

Hi Taruga,

wow that looks awesome !!

So here's what your kext says about my Conexant HD Audio (in Windows & Linux: 0x14f15047):

CODE

HDAudio[0x29e0c00]::CodecDetection-started(0x269cd80) by Taruga
HDAudio::D27:F0 Irq: 22 Vid: 8086 Pid: 27d8
:/root# HDAudio::Cad Address: 0
HDAudio::Vid/Pid    : 0x14f15047 0x00000000 0x00000000
HDAudio::Subsystem  : 0x1179ff31
HDAudio::Revision   : 0x00100000
HDAudio[0x00000000]::CodecDetection-ended(0x1)

What do you think - does it look as if your final patcher v.2 can enable sound here?

Also attached you find my Linux codec dump and the Windows Conexant Driver's inf file for comparison, in case if needed.

Thanks a lot, and looking forward to donate soon,

Bugs

Attached File(s)

 BD1HDAa.inf.zip ( 5.5K ) Number of downloads: 18
 codec_0_CONEXANT_Toshiba_BugsBunny.txt.zip ( 1.42K ) Number of downloads: 21

 

[mactist]

Thanks Taruga for all your efforts.

I have Sigmatel 9205 on my Dell Latitude D630 (linux codec dump attached and also windows driver). And what I get from your new HDAudio3.kext is:

bash-3.2# kextload -v /HDAudio.kext
kextload: can't contact kextd (continuing anyway)
kextload: extension /HDAudio.kext appears to be loadable
kextload: loading extension /HDAudio.kext
kextload: /HDAudio.kext loaded successfully
kextload: sending personalities to kernel:
kextload: from extension /System/Library/Extensions/IOPCIFamily.kext:
kextload: IOPCI2PCIBridge-Name
kextload: IOPCI2PCIBridge-i386
kextload: IOPCI2PCIBridge-PCI
kextload: from extension //DAudio.kext:
kextload: HDAudio
kextload: sending 4 personalities to the kernel
kextload: matching started for /HDAudio.kext

Is there any way to make this soundcard work. I tried the HDAPatchers 1.17,1,18 also but no luck.

Attached File(s)

 sigmatel9205.txt ( 4.89K ) Number of downloads: 24
 92XXM4_3.INI.txt ( 7.31K ) Number of downloads: 5

 

[BugsB]

mactist, u need 2 follow Taruga's directions ..

.. do exactly as he has written and edit your posting accordingly .. as of now it is of no value.

[mactist]

mactist, u need 2 follow Taruga's directions ..

.. do exactly as he has written and edit your posting accordingly .. as of now it is of no value.

Thanks doc ... I did follow Taruga's directions and posted what I observed.

[BugsB]

how come it does not look at all as if you are loading the kext from single user mode -s, but from Mac OS GUI? Also the line kextload: from extension /System/Library/Extensions/IOPCIFamily.kext: shows pretty clearly that you must have copied the kext not to root but into the extensions folder, because if you had copied it to root there would be no way for the kext to have dependencies to anything in the Extensions folder ..

So, just doublecheck again if you have really done every step correctly. Your message does not even look similar to the others here ..

Taruga did not write kextload -v /HDAudio.kext as you did, that already is a mistake.

[mactist]

how come it does not look at all as if you are loading the kext from single user mode -s, but from Mac OS GUI? Also the line kextload: from extension /System/Library/Extensions/IOPCIFamily.kext: shows pretty clearly that you must have copied the kext not to root but into the extensions folder, because if you had copied it to root there would be no way for the kext to have dependencies to anything in the Extensions folder ..

So, just doublecheck again if you have really done every step correctly. Your message does not even look similar to the others here ..

Taruga did not write kextload -v /HDAudio.kext as you did, that already is a mistake.

I had to write down the code and dual boot into Windows to post into this forum. So it might look like the output is from a GUI. The kext was copied to a root folder and I have no idea where the kext got its dependencies. I did see a few similar messages before:

http://forum.insanelymac.com/index.php?s=&...st&p=536697
http://forum.insanelymac.com/index.php?s=&...st&p=535502
http://forum.insanelymac.com/index.php?s=&...st&p=535628
http://forum.insanelymac.com/index.php?s=&...st&p=535966
http://forum.insanelymac.com/index.php?s=&...st&p=536552
http://forum.insanelymac.com/index.php?s=&...st&p=536885

I did a "kextload -v" to see a detailed output. It does no harm. This is an address "0" card that I have. Do you per chance have the "HDaudio2.kext.zip"

[BugsB]

I used the very latest from the top postiing, HDAudio3.kext.zip. Are you sure your sigmatel is Intel High Definition based at all?

[brlock]

Conexant 5045 in a fujitsu-siemens si1520


kextload: /HDAudio.kext loaded successfully
HDAudio[0x297dc80]::CodecDetection-started(0x25faf80) by Taruga
/HDAudio::D27:F0 Irq: 22 Vid: 8086 Pid: 27d8
localhost:/ root# HDAudio::Cad Address: 0
HDAudio::Vid/Pid : 0x14f15045 0x00000000 0x00000000
HDAudio::Subsystem : 0x173410ad
HDAudio::Revision : 0x00100100
HDAudio[0x3833800]::CodecDetection-ended(0x1)

Bom trabalho