Need testers for one of the components of next v2.00 Patcher Options

[Solique]

In single user mode on my ALC888 (Abit IP35 Pro M/B) using AudioHDA3. Without the -v on kextload I just get the message that the extension was loaded successfully.

I've attached the Linux codec output in its entirety. I had to correct the Subsystem id in this - it was 0x147b0000, fixed it to 0x147b1083.

CODE

bash-3.2# kextload -v /HDAudio.kext
kextload: extension /HDAudio.kext appears to be loadable
kextload: loading extension /HDAudio.kext
kextload: /HDAudio.kext loaded successfully
kextload: sending personalities to kernel:
kextload: from extension /System/Library/Extensions/IOPCIFamily.kext:
kextload: IOPCI2PCIBridge-Name
kextload: IOPCI2PCIBridge-i386
kextload: IOPCI2PCIBridge-PCI
kextload: from extension //DAudio.kext:
kextload: HDAudio
kextload: sending 4 personalities to the kernel
kextload: matching started for /HDAudio.kext

Attached File(s)

 IP35ProCodecDump.txt ( 8.99K ) Number of downloads: 39

 

[tarastalian]

HP nx6310 here. This is my detection:

HDAudio[0x1dc9c00]::CodecDetection-started(0x397cb80) by Taruga
HDAudio::D27:F0 Irq: 21 Vid: 8086 Pid: 27d8
HDAudio::Cad Address: 0
HDAudio::Vid/Pid : 0x11d41981 0x00000000 0x00000000
HDAudio::Subsystem : 0x103c30aa
HDAudio::Revision : 0x00100200
HDAudio[0x1dc9c00]::CodecDetection-ended(0x1)

The same values in my linux codec dump:
Codec: Analog Devices AD1981
Address: 0
Vendor Id: 0x11d41981
Subsystem Id: 0x103c30aa
Revision Id: 0x100200

[avk]

test on: HP nx6310 EY512ES CoreDuo T2050 sys: Jas 10.4.8 (yet no sound ) sound: Soundmax HD Audio 24bit ADI 1981 HDoutput:HDAudio[0x1ca2800]::CodecDetecrion-started(0x19ab080) by TaguraHDAudio::D27:F0 Irq: 21 Vid: 8086 Pid: 27d8HDAudio::Cad Address: 0HDAudio::Vid/Pid : 0x11d41981 HDAudio::0x103c30aaHDAudio::0x00100200HDAudio[0x1ca2800]::CodecDetection-ended(0x1)

version 3 output:kextload: HDAudio.kext loaded successfullyHDAudio[0x1ca1800]::CodecDetecrion-started(0x19ab080) by TaguraHDAudio::D27:F0 Irq: 21 Vid: 8086 Pid: 27d8HDAudio::Cad Address: 0HDAudio::Vid/Pid : 0x11d41981 0x00000000 0x00000000 HDAudio::0x103c30aaHDAudio::0x00100200HDAudio[0x1ca1800]::CodecDetection-ended(0x1)

there is no difference between linux codec dump and output of detection in 1st and in 3rd version(version 2 unseen/untested by me)

version 3 output:kextload: HDAudio.kext loaded successfullyHDAudio[0x1ca1800]::CodecDetecrion-started(0x19ab080) by TaguraHDAudio::D27:F0 Irq: 21 Vid: 8086 Pid: 27d8HDAudio::Cad Address: 0HDAudio::Vid/Pid : 0x11d41981 0x00000000 0x00000000 HDAudio::0x103c30aaHDAudio::0x00100200HDAudio[0x1ca1800]::CodecDetection-ended(0x1)

[elviejo]

With the 3rd kext I get this:
KEXTLOAD: /HDAudio.kext loaded succesfully
HDAudio[0x3e03000] : : Codec Detection Started(0x3b31900) by Taruga
HDAudio : : D27 : F0 Irq: 16 Vid: 8086 Pid: 27d8
: /root# HDAudio : : Card Address : 0
HDAudio : : Vid/Pid : 0x00000000 0x00000000 0x00000000
HDAudio : : Subsystem : 0x00000000
HDAudio : : Revision : 0x00000000
HDAudio[0x3e03000] : : CodecDetection-ended(0x1)

So is not detecting this audio card ( ALC861-VD on Biostar 945GZ Micro775 SE).

[mikemore]

One problem here.

I have tryed version 3 of your kext, but when i write "chmod -R 755 /HDAudio.kext" in terminal, after i press Return, i have a kernel panic.

What can it be ?

I have the Pavilion in sign whit ToH and a Conexant HDA.

M'n'M

[SticMACâ„¢]

Taruga, a Gift for all your hard work!

This post has been edited by Taruga: Dec 13 2007, 07:54 AM

Reason for edit: Nice rockin' Turtle Sticman :D Thanx !

[flibblesan]

ASRock ConRoe 1333-D667 R1.0 ALC888

HDAudio[0x438a000]::CodecDetection-started(0x39bbf00) by Taruga
HDAudio::D27:F0 Irq: 16 Vid: 8086 Pid: 27d8
HDAudio::Cad Address: 0
HDAudio::Vid/Pid : 0x10ec0888 0x00000000 0x00000000
HDAudio::Subsystem : 0x18491e01
HDAudio::Revision : 0x00100001
HDAudio[0x438a000]::CodecDetection-ended(0x1)

Did it work? Hope it did. I'd love full support for audio on my board.

[wenecon]

It says kext loaded succcesfully and then NOTHING else.

Does anyone know why???

[AlainTox714]

Hi Taruga thanks for your work, here are my results with HDAudio3.kext

HDAudio[0x3e56800]::CodecDetection-started(0x3b32c00) by Taruga
/HDAudio::D27:F0 Irq: 22 Vid: 8086 Pid: 27d8
:HDAudio::Cad Address: 0
HDAudio::Vid/Pid : 0x00000000 0x00000000 0x00000000
HDAudio::Subsystem : 0x00000000
HDAudio::Revision : 0x00000000
HDAudio[0x3e56800]::CodecDetection-ended(0x1)


BadAxe2 - SigmaTel STAC9274D

hope this help.

[dong]

AD 1981 on T60

CODE

HDAudio[0x3dda000]::CodecDetection-started(0x3bfd980) by Taruga
HDAudio::D27:F0 Irq:17 Vid: 8086 Pid:27d8
HDAudio::Cad Address : 0
HDAudio::Vid/Pid     : 0x11d41981 0x00000000 0x00000000
HDAudio::Subsystem   : 0x17aa2025
HDAudio::Revision    : 0x00100200
HDAudio[0x3dda000]::CodecDetection-ended(0x1)

The detected information is the same as the linux codec dump.

[New2OSx]

here are my results with HDAudio3.kext

HDAudio[0x3c7cc00]::CodecDetection-started(0x3960480) by Taruga
/HDAudio::D27:F0 Irq: 22 Vid: 8086 Pid: 27d8
:HDAudio::Cad Address: 0
HDAudio::Vid/Pid : 0x10ec0861 0x00000000 0x00000000
HDAudio::Subsystem : 0x11791205
HDAudio::Revision : 0x00100300
HDAudio[0x3c7cc00]::CodecDetection-ended(0x1)

[GingerPrince]

Tried it on an ASUS p5k-e with Analog Devices 1988B and it just says kext successfully loaded.

any ideas why there is no output?

cheers,
Matt

[NeSuKuN]

[Specs in signature]

CODE

localhost:/ root# kextload -v HDAudio.kext
HDAudio[0x4e84200]::CodecDetection-started(0x4ad7000) by Taruga
HDAudio::D27:F0 Irq 16 Vid: 8086 Pid: 27d8
HDAudio::Cad Address: 0
HDAudio::Vid/Pid: 0x10ec0888 0x000000 0x000000
HDAudio::Subsystem: 0x18491e01
HDAudio::Revision: 0x00100001
HDAudio[0x4e84200]::CodecDetection-ended(0x1)

[seskanda]

For some strange reason, now whenever i load it [0x2a3f400] came back in the first and last lines... Anyhow, i wanted to try the HDAudio2.kext ,but it disappeared...so i want ahead and tried HDAudio3.kext. Now, all i get is:

CODE

kextload: /HDAudio.kext loaded succesfully

And that's it! If i try again it says this:

CODE

kextload: extension /HDAudio.kext is already loaded

Another attempt brings back the first message. I'm NO programmer, but maybe Address 1,2 has to do with the difference between Desktops and Laptops, right? I really hope all this gets sorted out by Christmas.....

[OcciJano]

Intel D945GTPLR SigmaTel STAC9223 page info from Intel http://www.intel.com/design/motherbd/tp/tp_available.htm

HDAudio[0x3e88e00]::CodecDetection-started(0x3bec980) by Taruga
HDAudio::D27:F0 Irq: 22 Vid: 8086 Pid: 27d8
HDAudio::Cad Address: 0
HDAudio::Vid/Pid : 0x00000000
HDAudio::Subsystem : 0x00000000
HDAudio::Revision : 0x00000000
HDAudio[0x3e88e00]::CodecDetection-ended(0x1)

Linux Codec from http://psykopat.free.fr/apple/AppleHDA/

Codec: SigmaTel STAC9220D/9223D A2
Address: 2
Vendor Id: 0x83847681
Subsystem Id: 0x80860303
Revision Id: 0x103201
Greetings from México City

[wmarsh]

Hi guys, I need some testers for a component of my next patcher. (This test is very important for the release of the new patcher)

Stac 9227 on Dell E520 (linux codec posted on other thread)
http://forum.insanelymac.com/index.php?s=&...st&p=532235

The Linux dump starts as follows:
Codec: SigmaTel STAC9227
Address: 2
Vendor Id: 0x83847618
Subsystem Id: 0x102801dd
Revision Id: 0x100201

Therefore, I believe its one of those Taruga is having problems with.

On mine it just says "kext loaded successfully" -- No output as at top or as posted on other threads.
This is also true if I move it to /System/Library/Extensions, unload Tiger kexts (which I am currently using for sound), then kextload ./HDAudio.kext

kextload -v gives:
kextload: extension /HDAudio.kext appears to be loadable
kextload: loading extension /HDAudio.kext
kextload: /HDAudio.kext loaded successfully
kextload: sending personalities to kernel:
kextload: from extension /System/Library/Extensions/IOPCIFamily.kext:
kextload: IOPCI2PCIBridge-Name
kextload: IOPCI2PCIBridge-i386
kextload: IOPCI2PCIBridge-PCI
kextload: from extension //DAudio.kext:
kextload: HDAudio
kextload: sending 4 personalities to the kernel
kextload: matching started for /HDAudio.kext

In gui, kext loads, but no output devices are found.

We do all appreciate your hard work Taruga.

[tchow]

I test my Toshiba notebook only speaker working . mic can't record (nor working)

Attached File(s)

 alc861.txt ( 5.53K ) Number of downloads: 21

 

[Taruga]

For some strange reason, now whenever i load it [0x2a3f400] came back in the first and last lines... Anyhow, i wanted to try the HDAudio2.kext ,but it disappeared...so i want ahead and tried HDAudio3.kext. Now, all i get is:

CODE

kextload: /HDAudio.kext loaded succesfully

And that's it! If i try again it says this:

CODE

kextload: extension /HDAudio.kext is already loaded

Another attempt brings back the first message. I'm NO programmer, but maybe Address 1,2 has to do with the difference between Desktops and Laptops, right? I really hope all this gets sorted out by Christmas.....

Taruga: Well, the HD Audio Bus can support multiple devices, Audio, Modem, HDMI, etc
At the moment, it seems I can only communicate with the audio codec if it´s in address 0.
I have to get access to a pc with an audio codec in a different address to improve the code or else I´ll have to make a manual option for codecs at other addresses as I need to know where they are to program the codec right.

Why is this important ? For ex. for codecs that show input and output devices but don´t work at all, they need some code to modify codec parameters so they can work properly. And this is only one example.

[SticMACâ„¢]

MAYBE????????

I ran Ubuntu 7.10 64bit, and where i told you a lot of 2's came up!? (hotplug etc.) there are a lot of 4's coming up!
Could it be that the search has to go as deep as 4?


SticMAN

Taruga: Well, the HD Audio Bus can support multiple devices, Audio, Modem, HDMI, etc
At the moment, it seems I can only communicate with the audio codec if it´s in address 0.
I have to get access to a pc with an audio codec in a different address to improve the code or else I´ll have to make a manual option for codecs at other addresses as I need to know where they are to program the codec right.

Why is this important ? For ex. for codecs that show input and output devices but don´t work at all, they need some code to modify codec parameters so they can work properly. And this is only one example.

[olivier-h]

Hi

First thx for your efforts Taruga!

MY mobo ASUS P5B with ADI1988A:

Kext loaded and nothing.

Bye