Need testers for one of the components of next v2.00 Patcher Options

[mitro]

adi HD 1981---Compaq 6710b

ALCinject: Starting.
ALCinject: Setting built-in=<data not shown>
ALCinject: Setting layout-id=<data not shown>
HDAudio[0x30d4a00]::CodecDetection-started(0x26ee000) by Taruga
HDAudio::D27:F0 Irq: 16 Vid: 8086 Pid: 284b
HDAudio::Cad Address: 0
HDAudio::Vid/Pid : 0x11d41981
HDAudio::Subsystem : 0x103c30c0
HDAudio::Revision : 0x00100200
HDAudio[0x30d4a00]::CodecDetection-ended(0x1)

Linux Codec

Codec: Analog Devices AD1981
Address: 0
Vendor Id: 0x11d41981
Subsystem Id: 0x103c30aa
Revision Id: 0x100200

Differ on Subsystem...

[SticMACâ„¢]

This time with VERSION #2
I typed:

kextload /hdaudio.kext at the root

my screen dump:

:/ root# kextload /hdaudio.kext
kextload: /hdaudio.kext loaded successfully
:/ root#_

Nothing happened?

SticMAN

Ps this is without my two kext files, ALCinjext.kext, APpleHDA.kext loaded (so no sound)

[h4z4rd]

Here you go, Taruga. No difference in either Subsystem or Address.

CODE

HDAudio[0x3730800]::CodecDetection-started(0x356f300) by Taruga
HDAudio::D27:F0 Irq: 16 Vid: 8086 Pid: 27d8
HDAudio::Cad Address: 0
HDAudio::Vid/Pid    : 0x10ec0883
HDAudio::Subsystem  : 0x1462f603
HDAudio::Revision   : 0x00100002

[kaze]

ALC 660 vd - Packard Bell BU45 Laptop
HDAudio[0x3c02a00]::CodecDetection-started(0x393f400) by Taruga
HDAudio::D27:F0 Irq: 16 Vid: 8086 Pid: 27d8
HDAudio::Cad Address: 0
HDAudio::Vid/Pid : 0x10ec0660
HDAudio::Subsystem : 0x16310000
HDAudio::Revision : 0x00100001
HDAudio[0x3c02a00]::CodecDetection-ended(0x1)
Adress & subsystem both match my linux dump


sticman, reboot then keep on mashing F8 and at prompt enter -s then load the kext
I think you are not in single user mode from what i seem to read

[SticMACâ„¢]

When one is at the prompt :/root#, black screen with white type, I think i'm in singlesuermode!!


Sticman

ps if you've been reading.....I'm not the only one returning 000000000's!!!!
I'm ALSO the one with the least problems my everything on my dell sound is working great !!

ALC 660 vd - Packard Bell BU45 Laptop
HDAudio[0x3c02a00]::CodecDetection-started(0x393f400) by Taruga
HDAudio::D27:F0 Irq: 16 Vid: 8086 Pid: 27d8
HDAudio::Cad Address: 0
HDAudio::Vid/Pid : 0x10ec0660
HDAudio::Subsystem : 0x16310000
HDAudio::Revision : 0x00100001
HDAudio[0x3c02a00]::CodecDetection-ended(0x1)
Adress & subsystem both match my linux dump


sticman, reboot then keep on mashing F8 and at prompt enter -s then load the kext
I think you are not in single user mode from what i seem to read

[New2OSx]

HDaudio2.kext:

:/ root# kextload /hdaudio.kext
kextload: /hdaudio.kext loaded successfully
HDAudio[0x3c7cc00]::CodecDetecrion-started(0x398c000) by Tagura
HDAudio testing address: 2 - 0x00000000
testing address 1 : 0x00000000
testing address 0: 0x10ec0861
HDAudio::D27:F0 Irq: 22 Vid: 8086 Pid: 27d8
HDAudio::Cad Address: 0
HDAudio::Vid/Pid : 0x10ec0861
HDAudio::Subsystem : 0x11791205
HDAudio::Revision : 0x00100300
HDAudio[0x3c7cc00]::CodecDetection-ended(0x1)

[tobi]

only get this ...

bash-3.2# kextload -v /HDAudio-1.kext
kextload: extension /HDAudio-1.kext appears to be loadable
kextload: loading extension /HDAudio-1.kext
kextload: /HDAudio-1.kext loaded successfully
kextload: sending personalities to kernel:
kextload: from extension /System/Library/Extensions/IOPCIFamily.kext:
kextload: IOPCI2PCIBridge-Name
kextload: IOPCI2PCIBridge-i386
kextload: IOPCI2PCIBridge-PCI
kextload: from extension //DAudio-1.kext:
kextload: HDAudio
kextload: sending 4 personalities to the kernel
kextload: matching started for /HDAudio-1.kext


have ADI1988A

[Headrush69]

Dell XPS 420 with Sigmatel 9227

CODE

HDAudio[0x3f67c00]::CodecDetection-started(0x3b92400) by Taruga
HDAudio::D27:F0 Irq: 16 Vid: 8086 Pid: 293e
HDAudio::Cad Address: 0
HDAudio::Vid/Pid    : 0x83847618
HDAudio::Subsystem  : 0x10280215
HDAudio::Revision   : 0x00100201
HDAudio[0x3f67c00]::CodecDetection-ended(0x1)

Matches output from Linux dump.

tobi, sure that was after booting in single user mode (-s)?

[seskanda]

It's NOT detecting my codec AT ALL. I did everything mentioned in the first post. I had to chmod logged in as root for that to work. Afterward, at boot i typed -s, then kextload /HDAudio.kext, here are my results:

CODE

HDAudio[0x2a40400]::CodecDetection-started(0x2809780) by Taruga
HDAudio::D27:F0 Irq: 16 Vid: 8086 Pid: 2668
HDAudio::Cad Address: 0
HDAudio::Vid/Pid    : 0x00000000
HDAudio::Subsystem  : 0x00000000
HDAudio::Revision   : 0x00000000
HDAudio[0x2a40400]::CodecDetection-ended(0x1)

0x00000000 means it's NOT recognizing my codec, right? Oddly, when i INITIALLY ran it the bracketed code in the first AND last line read [0x2a3f400] in both places, but 0x00000000 still was there. I have a Dell Dimension 3100/E310, which, AFAIK, has a Sigmatel 9200 chip. Now, compare the results with the linux codec dump below:

CODE

Codec: SigmaTel STAC9200
Address: 2
Vendor Id: 0x83847690
Subsystem Id: 0x102801c4
Revision Id: 0x102201

Maybe, linux (it was knoppix, i believe) detected it wrong, but at least it showed something. Any idea what's going on? I'll try the second HDAudio kext when i can. For now, some help would be great......

[mitro]

with version 2 I have only this log (adi hd 1981 on compaq 6710b)

kextload: started module /HDAudio.kext/Contents/MacOS/HDAudio
kextload: HDAudio.kext loaded successfully
kextload: loading personalities for extension //DAudio.kext and dependencies
kextload: sending personalities to kernel:
kextload: from extension /System/Library/Extensions/IOPCIFamily.kext:
kextload: IOPCI2PCIBridge-Name
kextload: IOPCI2PCIBridge-i386
kextload: IOPCI2PCIBridge-PCI
kextload: from extension //DAudio.kext:
kextload: HDAudio
kextload: sending 4 personalities to the kernel
kextload: matching started for HDAudio.kext

[PabloPCX]

Intel High Definition Audio:
Linux Codec
Codec: Conexant CX20551 (Waikiki)
Address: 0
Vendor Id: 0x14f15047
Subsystem Id: 0x103c30b2
Revision Id: 0x100000

CODE

HDAudio[0x305be00]::CodecDetection-started(0x2d48300) by Taruga
HDAudio::D27:F0 Irq: 22 Vid: 8086 Pid: 27d8
HDAudio::Cad Address: 0
HDAudio::Vid/Pid    : 0x14f1547
HDAudio::Subsystem  : 0x103c30b2
HDAudio::Revision   : 0x0010000
HDAudio[0x305be00]::CodecDetection-ended(0x1)

HDaudio2.kext:

CODE

HDAudio[0x3c7cc00]::CodecDetecrion-started(0x398c000) by Tagura
HDAudio::D27:F0 Irq: 22 Vid: 8086 Pid: 27d8
HDAudio testing address: 2   0x00000000
HDAudio testing address: 1 - 0x00000000
HDAudio testing address: 0  0x14f15047
HDAudio::Vid/Pid : 0x14f15047
HDAudio::Subsystem : 0x103c30b2
HDAudio::Revision : 0x00100000
HDAudio[0x30ece00]::CodecDetection-ended(0x1)

HDaudio3.kext:

CODE

HDAudio[0x3ede00]::CodecDetection-started(0x2cec000) by Taruga
/HDAudio::D27:F0 Irq: 22 Vid: 8086 Pid: 27d8
:HDAudio::Cad Address: 0
HDAudio::Vid/Pid : 0x14f15047 0x00000000 0x00000000
HDAudio::Subsystem : 0x103c30b2
HDAudio::Revision : 0x00100000
HDAudio[0x30ede00]::CodecDetection-ended(0x1)

[macgirl]

CODE

HDAudio[0x3dcf200]::CodecDetection-started(0x39b1580) by Taruga
HDAudio::D27:F0 Irq:21 Vid: 8086 Pid:284b
HDAudio::Cad Address : 0
HDAudio::Vid/Pid     : 0x83847616
HDAudio::Subsystem   : 0x1028009
HDAudio::Revision    : 0x00100201
HDAudio[0x3dcf200]::CodecDetection-ended(0x1)

Sigmatel 9228

[klerg]

Copy it to root ( / )

How can i do this? As a user or in the Root account, when i navigate to / via Finder-->Go-->Go to Folder I'm told "You can only read" under "Ownership & Permissions" of 'Get Info.' Drap 'n' Drop won't work either. Do i have do it via Terminal? If so, how?

[George123]

Hi, Taruga. I tested this HDAudio.kext on my lap top. My lap top is HP nx8420 with AD1981HD sound card. I tried many kext before. But I only can control the volume, and there is no sounds out.
With the HDAudio.kext, It shows the following information:

HDAudio[0x2efa600]::CodecDectection-started(0x2bd7480) by Taruga
HDAudio::D27:F0 Irq:16 Vid:8086 Pid:27d8
:/ root# HDAudio::Card Address:0
HDAudio::Vid/Pid :0x11d41981 0x00000000 0x00000000
HDAudio::Subsystem :0x103c30a3
HDAudio::Revision :0x00100200
HDAudio[0x2efa600]::CodecDetection-ended(0x1)

[avk]

My lap top is HP nx8420 with AD1981HD sound card. I tried many kext before. But I only can control the volume, and there is no sounds out.

Hi! have the same issue with HP nx6310 CoreDuo T2050 1600 Mhz MB:Intel® i945GM Express; video i950GMA
sound card: ADI 1981 HD


output of that kext is the same as linux codec dump

[Taruga]

What I´m testing here, is to check if the kext detects the codec info as the new patcher uses the same approach to identify it and program the codec ( this is necessary for a lots of codecs that don't work at the moment).
The problem is that, if it doesn't detect the codec info ... the new patcher will not with you unless I find a solution.

So, if your codec is detected then you´ll have a better chance to get yours working if it´s not at the moment.

[avk]

So, if your codec is detected then you´ll have a better chance to get yours working if it´s not at the moment.

is this is a big trouble, that your kext detected Revision id as 0x00100200, but linux codec dump is 0x100200?

can give any help with testing HP AD1981HD

[Max1980]

Realtek ALC 268 on Leopard 10.5.1 (HP Pavillion DV6626us)
HDAudio[0x29b3000]::CodecDetecrion-started(0x2656380) by Taruga
HDAudio::D27:F0 Irq: 22 Vid: 8086 Pid: 284b
HDAudio::Cad Address: 0
HDAudio::Vid/Pid : 0x10ec0268
HDAudio::Subsystem : 0x103c30cc
HDAudio::Revision : 0x00100003
HDAudio[0x29b3000]::CodecDetection-ended(0x1)


The codec dump in linux gives an erroneus codec dump:
Codec: Motorola Si3054
Address: 1
Vendor Id: 0x10573055
Subsystem Id: 0x10573055
Revision Id: 0x100700

Tried version 3
this is the result:
kextload: /hdaudio.kext loaded successfull

BTW I got the right codec dump in linux ([code][/code]see attachment)

Attached File(s)

 codec_dump.txt ( 5.37K ) Number of downloads: 134

 

[Mariusz]

Version 3.

HDAudio3.kext

CODE

HDAudio[0x3d8a800]::CodecDetection-started(0x3996000) by Taruga
HDAudio::D27:F0 Irq: 22 Vid: 8086 Pid: 27d8
HDAudio::Cad Address: 0
HDAudio::Vid/Pid    : 0x10ec0861 0x00000000 0x00000000
HDAudio::Subsystem  : 0x11791205
HDAudio::Revision   : 0x00100300
HDAudio[0x3d8a800]::CodecDetection-ended(0x1)

Linux dump

CODE

Codec: Realtek ALC861
Address: 0
Vendor Id: 0x10ec0861
Subsystem Id: 0x11791205
Revision Id: 0x100300

BR,
Mariusz.

[Krazubu]

For me it doesn't report anything, it just reads "kext loaded successfully", my codec is CMI9880 (c-media).

Taruga, in the worst case, wouldn't it be possible for those with undetected codecs to make a kind of assistant that would allow us to manually enter the required data that we would get somewhere else (from a datasheet, a windows tool, linux dump etc...) ?

This post has been edited by Taruga: Dec 12 2007, 02:17 PM

Reason for edit: I will think of something....