Need testers for one of the components of next v2.00 Patcher Options

[bijoux]

Taruga,
I tried the installer you attached but no success. Naturally, I have the same results as llauqsd. If there's anything I can do to help, let me know.
Thanks.

[TmR]

Laptop: Cebop HEL 750
Sound: Intel 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller
tested on Leo 10.5.1 kaly with ToH Kernel

Here is my result

:/ root# kextload /hdaudio.kext
kextload: /hdaudio.kext loaded successfully
:/ root#_

And here is my Linux Codec Dump

Codec: Motorola Si3054
Address: 1
Vendor Id: 0x10573055
Subsystem Id: 0x10573055
Revision Id: 0x100700

[Trolav]

Hardware: Acer TM6292 (Intel ICH8M, Realtek ALC268)

I edited info.plist for my device ID (8086:284b), and got some nice output:


HDAudio[0x3b39a00]::CodecDetection-started(0x38e1f00) by Taruga
HDAudio::D27:F0 Irq: 22 Vid: 8086 Pid: 284b
HDAudio::Cad Address: 0
HDAudio::Vid/Pid : 0x10ec0268 0x00000000 0x00000000
HDAudio::Subsystem : 0x1025011b
HDAudio::Revision : 0x00100003
HDAudio[0x3b39a00]::CodecDetection-ended(0x1)

This seems to correspond to the codec dump from linux (attached).
Noticed that the install AppleHDA.kext on my system actually got the Device ID for my card, but I still don´t have any sound.

I also attached output from linux lspci (just in case it´s of any interest)

Attached File(s)

 HDA.txt ( 5.72K ) Number of downloads: 34
 ALC268_lspci.txt ( 1.26K ) Number of downloads: 25

 

[Plast1k]

Followed instructions, loaded kext, no details given, simply "kext loaded successfully"

Test system specs are in sig, but the audio is:

Codec: Analog Devices AD1988B
Vendor: 0x11d4189b
Subsystem: 0x104381f2

Tried doing a codec dump using an Ubuntu disc, with the command:
cat /proc/asound/card0/codec#0

File attached: (hope it's of some use)
 P5N32_E_SLI_AD1988B.txt ( 10.72K ) Number of downloads: 17


Also just tried dropping the codec dump onto AppleHDAPatcherv1.20, but that just tells me "This codec is not working at the moment, it needs more research"

[bierbo24]

Computer: ASUS P5W DH Deluxe / Realtek ALC 882

HDAudio.kext:

CODE

HDAudio[0x297ca00]::CodecDetection-started(0x2682100) by Taruga
HDAudio::D27:F0 Irq: 19 Vid: 8086 Pid: 27d8
HDAudio::Cad Address: 0
HDAudio::Vid/Pid : 0x10ec0882 0x00000000 0x00000000
HDAudio::Subsystem : 0x1043e601
HDAudio::Revision : 0x00100101
HDAudio[0x297ca00]::CodecDetection-ended(0x1)

Linux Codec Dump:

CODE

Codec: Realtek ALC882
Address: 0
Vendor Id: 0x10ec0882
Subsystem Id: 0x1043e601
Revision Id: 0x100101

THX Taruga for your great work!!!

PS: Is there any change to get the front microphone working?

Attached File(s)

 alc882_p5w_dump.txt ( 9.64K ) Number of downloads: 22

 

[Hawie]

For Toshiba Portege R500 with Realtek ALC262 (not working now)

Output:

CODE

kextload: /HDAudio.kext loaded successfully
HDAudio[0x3bf5e00]:: Codec Dection_started(0x3964a00)
HDAudio[0x3bf5e00]:: Codec Dection ended(0x1)

linux codec dump here:
http://forum.insanelymac.com/index.php?sho...=80#entry553825


GOOD NEWS
After change BIOS setting, HDAudio.kext working:
Output:

CODE

kextload: /HDAudio.kext loaded successfully
HDAudio[0x3b50800]:: Codec Dection_started(0x392df00)
HDAudio:: D27:F0 Irq: 22 Vid: 8086 Pid: 27d8
HDAudio:: Cad Address: 0
HDAudio::Vid/Pid       : 0x10ec0262 0x00000000 0x00000000
HDAudio::Subsystem : 0x11790508
HDAudio::Revision     : 0x00100100
HDAudio[0x3b50800]:: Codec Dection ended(0x1)

linux codec dump is the same.


if u need any further information, pls dont hesitate to contact me.

[Azurael]

i have REALTEK ALC862 on LEOPARD and TOSHIBA A200-D14 notebook...

i've red somewhere (what could be seen from codec dump) that it is actually ALC861-VD??
is there anything i can do to test it little more???

ALC862 is a new revision of ALC861-VD, AFAIK. There are differences, hence ALC862's new codec ID (ending in 862) - however, a lot of software, including ALSA, picks up the codec as an 861-VD. There's no such thing as an 862-VD according to Realtek, which is what some people have been referring to it as.

[Shanems3]

Stac9205 all i get is Kext Loaded Sucessfully

i get no print out

[gerodrx]

Stac9205 all i get is Kext Loaded Sucessfully

Here its the same at Vostro 1500

[jake123]

Stac9205 all i get is Kext Loaded Sucessfully

Here its the same at Vostro 1500

Sigmatel 9228 shows kext loading successfully... Although "macgirl" with the same laptop i have received results.. maybe I did something wrong..

[anti_user]

Im try to kextload HDAudio.kext and i get - kextload seccessfully and nothing more, but i make dump from Linux Ubuntu 7.04. Thats it:

CODE

Codec: Conexant CX20549 (Venice)
Address: 0
Vendor Id: 0x14f15045
Subsystem Id: 0x103c30d5
Revision Id: 0x100100
Default PCM:
rates [0x140]: 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
Node 0x10 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x2b, nsteps=0x2b, stepsize=0x05, mute=1
Amp-Out vals: [0x23 0x23]
Pincap 0x0810014: OUT EAPD Detect
Pin Default 0x94170110: [Fixed] Speaker at Int Right
Conn = Analog, Color = Unknown
Pin-ctls: 0x40: OUT
Power: 0x0
Connection: 2
0x19* 0x17
Node 0x11 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x2b, nsteps=0x2b, stepsize=0x05, mute=1
Amp-Out vals: [0x23 0x23]
Pincap 0x08113c: IN OUT HP Detect
Pin Default 0x0421201f: [Jack] HP Out at Ext Right
Conn = 1/8, Color = Grey
Pin-ctls: 0xc0: OUT HP
Power: 0x0
Connection: 2
0x19* 0x17
Node 0x12 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x2b, nsteps=0x2b, stepsize=0x05, mute=1
Amp-Out vals: [0xab 0xab]
Pincap 0x08113c: IN OUT HP Detect
Pin Default 0x400001f0: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
Pin-ctls: 0x20: IN
Power: 0x0
Connection: 2
0x19* 0x17
Node 0x13 [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x0810: OUT
Pin Default 0x400001f0: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
Pin-ctls: 0x00:
Connection: 1
0x18
Node 0x14 [Pin Complex] wcaps 0x400081: Stereo
Pincap 0x081124: IN Detect
Pin Default 0x04a11020: [Jack] Mic at Ext Right
Conn = 1/8, Color = Black
Pin-ctls: 0x24: IN
Node 0x15 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0820: IN
Pin Default 0x400001f0: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
Pin-ctls: 0x00:
Node 0x16 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Amp-Out caps: ofs=0x07, nsteps=0x07, stepsize=0x0b, mute=1
Amp-Out vals: [0x06]
Node 0x17 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In
Amp-In caps: ofs=0x14, nsteps=0x2b, stepsize=0x05, mute=1
Amp-In vals: [0x94 0x94] [0x94 0x94] [0x94 0x94] [0x94 0x94] [0x94 0x94]
Power: 0x0
Connection: 5
0x19 0x14 0x12 0x11 0x15
Node 0x18 [Audio Output] wcaps 0x211: Stereo Digital
PCM:
rates [0x40]: 48000
bits [0x6]: 16 20
formats [0x5]: PCM AC3
Node 0x19 [Audio Output] wcaps 0xc11: Stereo
PCM:
rates [0x540]: 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power: 0x0
Node 0x1a [Audio Input] wcaps 0x100d0b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x17, stepsize=0x05, mute=1
Amp-In vals: [0x17 0x17] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
Power: 0x0
Connection: 5
0x17 0x14* 0x12 0x11 0x15
Node 0x1b [Vendor Defined Widget] wcaps 0xf00000: Mono

Best Regards!

[Spirou Hyluan]

All i get is "kextload: HDAudio.kext/ loaded successfully" on my P5B-Plus (AD1988) with HDAudio3.kext

Maybe if did something wrong... Let me know.

Regards and thanks for your work. Ready to do other tests if needed.

[Shanems3]

Taruga,
I ran this with -t for diagnostic messages
"Kext has no explicit kernel dependacies" is what i get
then "Kext Loaded Successfully"

also guys who arent getting a output
type this
kextload -t /HDAudio.kext

also, taruga, i am runing 10.5.1 with efi 8 and vanilla kernel..

[Spirou Hyluan]

Taruga,
I ran this with -t for diagnostic messages
"Kext has no explicit kernel dependacies" is what i get
then "Kext Loaded Successfully"

also guys who arent getting a output
type this
kextload -t /HDAudio.kext

also, taruga, i am runing 10.5.1 with efi 8 and vanilla kernel..

Got this with this command :

CODE

-- kextload -t /HDAudio.kext
extension /HDAudio.kext has potential problems:
Warnings
{
    "Kext has no explicit kernel dependency" = true
}

kextload: extension /HDAudio.kext appears to be loadable
kextload: /HDAudio.kext loaded successfully

OSX 10.5.1, stock kernel with Iatkos EFI.
HDAudio3.kext
P5B-Plus (AD1988).

[Kelvan]

On Laptop : Asus f7f with ALC660vd/861vd (speakers lenovo)

CODE

HDaudio[0x3c2b600]::CodecDetection-started(0x39e4600) by taruga
HDAudio::D27:F8 Irq: 16 Vid: 8086 Pid: 27d8
:/ root# HDAudio:: Cad Adress: 0
HDAudio::Vid/Pid : 0x10ec0660 0x00000000 0x0000000
HDAudio::Subsystem : 0x10431339
HDAudio::Revision : 0x0010001
HDaudio[0x3c2b600]::CodecDetection-ended(0x1)

[Chris17]

On HP notebook nw9440 with SoundMAX Integrated Digital HD Audio:

CODE

Jan 2 18:48:50 localhost kernel[0]: HDAudio::D27:F0 Irq: 16 Vid: 8086 Pid: 27d8
Jan 2 18:48:49 localhost kextd[102]: safe boot; invalidating extensions caches
Jan 2 18:48:50 localhost kernel[0]: HDAudio::Cad Address: 0
Jan 2 18:48:50 localhost kernel[0]: HDAudio::Vid/Pid : 0x11d41981 0x00000000 0x00000000
Jan 2 18:48:50 localhost kernel[0]: HDAudio::Subsystem : 0x103c309f
Jan 2 18:48:50 localhost kernel[0]: HDAudio::Revision : 0x00100200
Jan 2 18:48:50 localhost kernel[0]: HDAudio[0x65a5200]::CodecDetection-ended(0x1)
Jan 2 18:48:50 localhost kernel[0]: HDAudio[0x65a5600]::CodecDetection-started(0x62a6e80) by Taruga
Jan 2 18:48:50 localhost kernel[0]: HDAudio::D27:F0 Irq: 16 Vid: 8086 Pid: 27d8
Jan 2 18:48:50 localhost kernel[0]: HDAudio::Cad Address: 0
Jan 2 18:48:50 localhost kernel[0]: HDAudio::Vid/Pid : 0x11d41981 0x00000000 0x00000000
Jan 2 18:48:50 localhost kernel[0]: HDAudio::Subsystem : 0x103c309f
Jan 2 18:48:50 localhost kernel[0]: HDAudio::Revision : 0x00100200
Jan 2 18:48:50 localhost kernel[0]: HDAudio[0x65a5600]::CodecDetection-ended(0x1)

Best regards and good luck ...

[3mp3ror]

Got this with this command :

CODE

-- kextload -t /HDAudio.kext
extension /HDAudio.kext has potential problems:
Warnings
{
    "Kext has no explicit kernel dependency" = true
}

kextload: extension /HDAudio.kext appears to be loadable
kextload: /HDAudio.kext loaded successfully

Same here ... Kalyway, vannila kernel, leo 10.5.1 on Fujitsu Siemens V5545
ubuntu dump:
 Conexant_CX20549.txt ( 2.74K ) Number of downloads: 25

[George123]

My Sound Card is AD1981HD, test result is:

kextload : /HDAudio.kext/ loaded successfully
HDAudio [0x2f10600] :: Codec Detection-started (0x2be2200) by Taruga
HDAudio:: D27:F0 Irq:16 Vid:8086 Pid:27d8
:/root# HDAudio::Cad Address:0
HDAudio::Vid/Pid:0x11d41981 0x00000000 0x00000000
HDAudio::Subsystem: 0x103c30a3
HDAudio::Revision: 0x00100200
HDAudio[0x2f10600]::CodecDetection-ended(0x1)

[Xwing61]

Hi guys, I need some testers for a component of my next patcher. (This test is very important for the release of the new patcher)
What should you do:

• Download the attached kext, unzip it.
• Copy it to root ( / )
• Set permissions
  
  CODE
  chown -R root:wheel /HDAudio.kext
  chmod -R 755 /HDAudio.kext
• Boot with -s (no need to mount file system)
• kextload /HDAudio.kext

It should read the codec info and report something like this:

CODE

Dec 11 15:01:07 taruga kernel[0]: HDAudio[0x9f24c00]::CodecDetection-started(0x4caa880) by Taruga
Dec 11 15:01:07 taruga kernel[0]: HDAudio::D27:F0 Irq: 19 Vid: 8086 Pid: 27d8
Dec 11 15:01:08 taruga kernel[0]: HDAudio::Cad Address: 0
Dec 11 15:01:08 taruga kernel[0]: HDAudio::Vid/Pid    : 0x10ec0882
Dec 11 15:01:08 taruga kernel[0]: HDAudio::Subsystem  : 0x1043e601
Dec 11 15:01:08 taruga kernel[0]: HDAudio::Revision   : 0x00100101
Dec 11 15:01:08 taruga kernel[0]: HDAudio[0x9f24c00]::CodecDetection-ended(0x1)

I need to check if it´s reading the info correctly on different chipsets and codecs
If you have you ownr linux codec dump, report if there is any difference on: Address and Subsystem

Thanx for your help

Not Detected Codecs Seems that it´s not detecting codecs that show Address 2 in linux dump (and maybe Address 1 also) I need to find a way to detect them as the new patcher will use this detection method. If I cannot detect a codec, the new patcher will not work with them a most worse, I cannot program the codec initialization. I hope to find what´s wrong.

I'm new, how do you set permissions?

[anti_user]

I'm new, how do you set permissions?

its simple - applications - disk utility - mark your mac os disk - click repair permissions

if you want to know how to use CHMOD and CHOWN try to type in linux man chmod and man chown or try to get information from google;)