ALC88x 10.4.8 Kext, Drivers for ALC88x Audio on 8.8.1 kernel Options

[charlienail]

so i have to add that whole section into both the files and change the device id? should i use the controller id or the audio id?

[Skitals]

Okay, so I've got basic line-out working now on my alc888 (ga-p35-ds3L - ICH9) by adding the proper ids after installing the alc888 package in the first post.

Now, is there anything special I need to do to get the front panel audio working? The front panel on my case (cooler master cm 690) had multiple audio connections for my motherboard, including HD Audio, AC 97, and Azalia. From what I can tell from my motherboards book, both HDA and AC97 are supported. My understanding was that this is an HDA driver. Should I try another driver, or is there something else I need to do?

There is also only one output option in the sound menu (basic line-out), even though my motherboard has multichannel/digital/spdif/optical.

Is this the wrong driver to get all this working?

[alexandros7]

i'd like to have my spdif out working.. gigabyte p965 ds3

[InterHmai]

Got this working on Leopard, with a ga-965p ds3 rev2 alc888. Only 3ports though, 10.4.10 had 6 ports

[Espionage724]

Will my computer "DIE" if i do this on "LEOPARD"?

[deniz1992]

OK, I have started a new thread so I can keep all my drivers together in one easy to find post. For a little background info on this project refer to THIS thread. I would also like to mention that this would not be possible without Semthex, Taruga, TheMax32000, Rene204 and the countless testers that have helped develop these kext!

Skippy

AzaliaAudio.pkg should give 2ch output on most High Def Audio chipsets (updated v1.1)
[attachment=6740:AzaliaAudio.pkg.zip]
ALC883Audio.pkg includes kext's for ALC883 support on mobo's with 3ports, 3ports w/digital, 6ports and 6ports w/digital
[attachment=6726:ALC883Audio.mpkg.zip]
ALC888Audio.pkg includes kext's for ALC888 support on mobo's with 3ports, 3ports w/digital, 6ports and 6ports w/digital
[attachment=6739:ALC888Audio.mpkg.zip]




If you have 3 outputs working you can setup 5.1 using Audio MIDI Setup found in the /Applications/Utilities/ folder. On the menu bar select "Audio>Open Aggregate Device Editor". Click on the "+" square and it will add a new aggregate device. Now select "Use" next to each output you want to add(usually the first 3) and click "done". Change Default Output to the "Aggregate Device". Now select "Aggregate Device" in the Properties For: box and click on "Configure Speakers". Click "Multichannel" and select "5.1 Surround". When your done configuring your speakers the way you want them, make sure you click "Apply" before "Done". You should now have 5.1 surround sound working.

hell JEH!!! TY FINALY I HAVE AUDIO midi says HD TYTYTYTYTYTYTY!!!!!!!!!

[Koke]

i'd like to have my spdif out working.. gigabyte p965 ds3

Same here.....

any clues?

[xJoshx]

Works good thanks alot!, AlC883 all functions working. 10.5 Leopard. Intel D945GCCR is my board... Now to tackle the onboard ethernet...

[Vanio]

It works!!
You guys are absolutely great!
Really really thanks. Very good work indeed!

[Lemongreen]

anyone got 5.1 working with alc889a?

btw. thanks for your work! at the moment i got 2ch output

[Paco Macos]

SOMEBODY THAT CAN MAKE A PAKG I I HAVE THE PROGRAM TO DO THEMSOMEBODY THAT CAN MAKE A PAKG I I HAVE THE PROGRAM TO DO THEMPAKAGEMAKERhttp://rapidshare.com/files/67413775/PackageMaker.app.zip CORRECT LINKhttp://rapidshare.com/files/67413775/PackageMaker.app.zip CORRECT LINK

[pavn]

SOMEBODY THAT CAN MAKE A PAKG I I HAVE THE PROGRAM TO DO THEMSOMEBODY THAT CAN MAKE A PAKG I I HAVE THE PROGRAM TO DO THEMPAKAGEMAKERhttp://rapidshare.com/files/67413775/PackageMaker.app.zip CORRECT LINKhttp://rapidshare.com/files/67413775/PackageMaker.app.zip CORRECT LINK

No problem. I have uphuck_10.4.9_v1.4i_r2 + mother board GA-P35C-DS3R with Realtek ALC889A audio - currently with support only of 2 channels under osx86.

I can prepare PAKG. You can send me all required data to pavn at centrum.cz, I will post PAKG here then.

[dlivny]

AzaliaAudio.pkg should give 2ch output on most High Def Audio chipsets (updated v1.1)
AzaliaAudio.pkg.zip ( 71.58K ) Number of downloads: 15864

This driver worked right away, thru a standard install (no editing or deleting of any kext) on my Gigabyte 945GZM-S2 mobo running 10.5 (Leo). Good one!

-DL

[markpenn]

alc 888 still doesn't have line in ...
line out is fine..

this is alc 888 with ich7

plz help!

[.lunatic]

Hmm...


thanks for this patch
Works on my setup. BUT the channels are only accessible separately. So i have 3 sets of stereo speakers to choose from for using audio.
How do i get em to work in 5.1 mode? I have configure them for multichannel. But it doesn't work.

Anyone know a solution?

[erbasvizzera]

Hi
i have a P5KC with ICH9 and ALC883 realtek.
I have installed leo but with this driver don't work
What i have to do?
thanks

[chrisando]

Hi guys I am using Os X 10.4.10 and cant get audio working my sound card is a Intel 82801G intel HDA at 0xfe138000 ICH7 using ALC 883 I tried all the driver on this forum and none is working I also tried the steps to generate them from Linux codec files please help

[7stars]

Hi
i have a P5KC with ICH9 and ALC883 realtek.
I have installed leo but with this driver don't work
What i have to do?
thanks

i have the same problem with P5K...i think that's no good for ICH9...
anyone can help?? alc883 for ICH9 kernel 9.0.0+

[duklaa]

I have Gigabyte 965P-DS3 (rev 3.3) and with ACL888Audio I was able get stereo and microphone working. But like others have reported before me, I cannot select 5.1 ...it's grayed out.

Has this issue been resolved? I read through all pages in this thread so far and couldn't find a solution.

Thanks in advance!

[chrisando]

Hi guys I have tried everything and still no sound on both 10.4.10 and 10.5 I have attached my Linux dump, please help.

CODE

Codec: Realtek ALC883
Address: 0
Vendor Id: 0x10ec0883
Subsystem Id: 0x14620349
Revision Id: 0x100002
Default PCM: rates 0x560, bits 0x0e, types 0x1
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
Node 0x02 [Audio Output] wcaps 0x11: Stereo
  PCM: rates 0x560, bits 0x0e, types 0x1
Node 0x03 [Audio Output] wcaps 0x11: Stereo
  PCM: rates 0x560, bits 0x0e, types 0x1
Node 0x04 [Audio Output] wcaps 0x11: Stereo
  PCM: rates 0x560, bits 0x0e, types 0x1
Node 0x05 [Audio Output] wcaps 0x11: Stereo
  PCM: rates 0x560, bits 0x0e, types 0x1
Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
  PCM: rates 0x560, bits 0x1e, types 0x1
Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x08 [Audio Input] wcaps 0x10011b: Stereo Amp-In
  Amp-In caps: ofs=0x08, nsteps=0x1f, stepsize=0x05, mute=1
  Amp-In vals:  [0x00 0x00]
  PCM: rates 0x160, bits 0x06, types 0x1
  Connection: 1
     0x23
Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In
  Amp-In caps: ofs=0x08, nsteps=0x1f, stepsize=0x05, mute=1
  Amp-In vals:  [0x00 0x00]
  PCM: rates 0x160, bits 0x06, types 0x1
  Connection: 1
     0x22
Node 0x0a [Audio Input] wcaps 0x100391: Stereo Digital
  PCM: rates 0x560, bits 0x1e, types 0x1
  Connection: 1
     0x1f
Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
  Amp-In vals:  [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
  Connection: 10
     0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17
Node 0x0c [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x00 0x00]
  Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
  Amp-Out vals:  [0x00 0x00]
  Connection: 2
     0x02 0x0b
Node 0x0d [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x00 0x00]
  Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
  Amp-Out vals:  [0x00 0x00]
  Connection: 2
     0x03 0x0b
Node 0x0e [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x00 0x00]
  Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
  Amp-Out vals:  [0x00 0x00]
  Connection: 2
     0x04 0x0b
Node 0x0f [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x00 0x00]
  Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
  Amp-Out vals:  [0x00 0x00]
  Connection: 2
     0x05 0x0b
Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x12 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x14 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x083e: IN OUT HP Detect
  Pin Default 0x0121441f: [Jack] HP Out at Ext Rear
    Conn = 1/8, Color = Green
  Pin-ctls: 0xc0: OUT HP
  Connection: 5
     0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x15 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x083e: IN OUT HP Detect
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
  Pin-ctls: 0x20: IN
  Connection: 5
     0x0c 0x0d* 0x0e 0x0f 0x26
Node 0x16 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x083e: IN OUT HP Detect
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
  Pin-ctls: 0x20: IN
  Connection: 5
     0x0c 0x0d 0x0e* 0x0f 0x26
Node 0x17 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x083e: IN OUT HP Detect
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
  Pin-ctls: 0x20: IN
  Connection: 5
     0x0c 0x0d 0x0e 0x0f* 0x26
Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x08173e: IN OUT HP Detect
  Pin Default 0x01a19c30: [Jack] Mic at Ext Rear
    Conn = 1/8, Color = Pink
  Pin-ctls: 0x24: IN
  Connection: 5
     0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x19 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x08173e: IN OUT HP Detect
  Pin Default 0x99a30931: [Fixed] Mic at Int ATAPI
    Conn = ATAPI, Color = Unknown
  Pin-ctls: 0x24: IN
  Connection: 5
     0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x1a [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x08173e: IN OUT HP Detect
  Pin Default 0x0181343f: [Jack] Line In at Ext Rear
    Conn = 1/8, Color = Blue
  Pin-ctls: 0x20: IN
  Connection: 5
     0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x08173e: IN OUT HP Detect
  Pin Default 0x99130110: [Fixed] Speaker at Int ATAPI
    Conn = ATAPI, Color = Unknown
  Pin-ctls: 0x40: OUT
  Connection: 5
     0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x1c [Pin Complex] wcaps 0x400001: Stereo
  Pincap 0x0820: IN
  Pin Default 0x593301f0: [N/A] CD at Int ATAPI
    Conn = ATAPI, Color = Unknown
  Pin-ctls: 0x00:
Node 0x1d [Pin Complex] wcaps 0x400000: Mono
  Pincap 0x0820: IN
  Pin Default 0x598301f0: [N/A] Line In at Int ATAPI
    Conn = ATAPI, Color = Unknown
  Pin-ctls: 0x00:
Node 0x1e [Pin Complex] wcaps 0x400300: Mono Digital
  Pincap 0x0810: OUT
  Pin Default 0x01454120: [Jack] SPDIF Out at Ext Rear
    Conn = Optical, Color = Green
  Pin-ctls: 0x00:
  Connection: 1
     0x06
Node 0x1f [Pin Complex] wcaps 0x400200: Mono Digital
  Pincap 0x0820: IN
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
  Pin-ctls: 0x00:
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x22 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
  Amp-Out caps: N/A
  Amp-Out vals:  [0x00 0x00]
  Connection: 11
     0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b
Node 0x23 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x80 0x80] [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
  Amp-Out caps: N/A
  Amp-Out vals:  [0x00 0x00]
  Connection: 11
     0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b
Node 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x25 [Audio Output] wcaps 0x11: Stereo
  PCM: rates 0x560, bits 0x0e, types 0x1
Node 0x26 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x00 0x00]
  Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
  Amp-Out vals:  [0x00 0x00]
  Connection: 2
     0x25 0x0b

Attached File(s)

 codec_0.txt ( 8.54K ) Number of downloads: 28